Merged upstream/master

config/optimize

@@ -38,6 +38,7 @@ fi
 
 if [ "$LTO_SUPPORT" = yes ];then
   GCC_OPTIM="$GCC_OPTIM -flto"
+  LD_OPTIM="$LD_OPTIM -flto"
 fi
 
 if [ "$GOLD_SUPPORT" = yes ];then
@@ -57,7 +58,7 @@ fi
 TARGET_CPPFLAGS=
 TARGET_CFLAGS="$TARGET_CFLAGS -Wall -pipe $GCC_OPTIM $PROJECT_CFLAGS"
 TARGET_CXXFLAGS="$TARGET_CFLAGS"
-TARGET_LDFLAGS="$TARGET_LDFLAGS $GCC_OPTIM $LD_OPTIM"
+TARGET_LDFLAGS="$TARGET_LDFLAGS $LD_OPTIM"
 TARGET_LIBDIR="$SYSROOT_PREFIX/lib $SYSROOT_PREFIX/usr/lib"
 TARGET_INCDIR="$SYSROOT_PREFIX/include $SYSROOT_PREFIX/usr/include"
 

packages/debug/gdb/meta

@@ -19,12 +19,12 @@
 ################################################################################
 
 PKG_NAME="gdb"
-PKG_VERSION="7.3"
+PKG_VERSION="7.3.1"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://www.gnu.org/software/gdb/"
-PKG_URL="http://ftp.gnu.org/gnu/gdb/$PKG_NAME-${PKG_VERSION}a.tar.bz2"
+PKG_URL="http://ftp.gnu.org/gnu/gdb/$PKG_NAME-$PKG_VERSION.tar.bz2"
 PKG_DEPENDS="ncurses expat"
 PKG_BUILD_DEPENDS="toolchain ncurses expat"
 PKG_PRIORITY="optional"

packages/initramfs/sysutils/busybox-initramfs/scripts/init

@@ -200,6 +200,7 @@ NFS_OVERLAY="192.168.1.1:/var/lib/overlay"
     mount_part "$boot" "/flash" "ro,noatime"
     show_splash
 
+<<<<<<< HEAD
     if [ -n "$disk" ]; then
       mount_part "$disk" "/storage" "rw,noatime"
 
@@ -239,6 +240,12 @@ NFS_OVERLAY="192.168.1.1:/var/lib/overlay"
   fi
 
   # unmount all other filesystems
+=======
+# move /flash to /sysroot
+  /bin/busybox mount --move /flash /sysroot/flash
+
+# unmount all other filesystems
+>>>>>>> upstream/master
   /bin/busybox umount /dev
   /bin/busybox umount /proc
   /bin/busybox umount /sys

packages/linux/init.d/02_cpupower

@@ -23,6 +23,12 @@
 #
 # runlevels: openelec, textmode
 
+case $RUNLEVEL in
+  boot)
     progress "set cpu's to full power"
+      cpupower frequency-set -g performance > /dev/null 2>&1
+    ;;
 
-  cpupower frequency-set -g performance
+  poweroff|reboot)
+    ;;
+esac

packages/linux/init.d/15_modules

@@ -23,6 +23,8 @@
 #
 # runlevels: openelec, textmode
 
+case $RUNLEVEL in
+  boot)
     (
       progress "loading kernel modules"
 
@@ -31,5 +33,9 @@
       for module in `cat /etc/modules|grep "^[^#]"`; do
         eval "modprobe $module" >/dev/null 2>&1
       done
-
     )&
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac

packages/mediacenter/xbmc/init.d/91_setup-addons

@@ -0,0 +1,44 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2011 Stephan Raue (stephan@openelec.tv)
+#
+#  This Program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#
+#  This Program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.tv; see the file COPYING.  If not, write to
+#  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+#  http://www.gnu.org/copyleft/gpl.html
+################################################################################
+
+#
+# setup XBMC addons
+#
+# runlevels: openelec, textmode
+
+case $RUNLEVEL in
+  boot)
+    progress "setup XBMC addons"
+
+    # hack: add addons to $PATH
+      for i in `find /storage/.xbmc/addons/* -name bin -type d`; do
+        PATH="$PATH:$i"
+      done
+      export PATH
+
+    # hack: make addon-bins executable
+      chmod +x /storage/.xbmc/addons/*/bin/* > /dev/null 2>&1
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac
+
+

packages/mediacenter/xbmc/init.d/92_setup-xbmc

@@ -22,6 +22,8 @@
 #
 # runlevels: openelec
 
+case $RUNLEVEL in
+  boot)
     progress "setup XBMC"
 
     #
@@ -131,3 +133,8 @@ EOF
         fi
         echo "</settings>" >> $HOME/.xbmc/userdata/guisettings.xml
       fi
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac

packages/mediacenter/xbmc/init.d/93_xbmc

@@ -22,6 +22,8 @@
 #
 # runlevels: openelec
 
+case $RUNLEVEL in
+  boot)
     LIRCDEV="/var/run/lirc/lircd"
     [ -e /var/run/lirc/lircd.irtrans ] && LIRCDEV="/var/run/lirc/lircd.irtrans"
     XBMC_ARGS="--standalone -fs --lircdev $LIRCDEV"
@@ -33,9 +35,6 @@ if $(cat /proc/bus/input/devices | grep Vendor=0471 | grep -q Product=20d9);then
       export SDL_MOUSE_RELATIVE=0
     fi
 
-# hack: make addon-bins executable
-  chmod +x /storage/.xbmc/addons/*/bin/* > /dev/null 2>&1
-
     # starting autostart script (will be removed later again, dont use it!!!)
       AUTOSTART="/storage/.config/autostart.sh"
       if [ -f $AUTOSTART ]; then
@@ -55,7 +54,7 @@ fi
     # set cpu's to 'on demand'
       ( usleep 15000000
         progress "set cpu's to 'on demand'"
-    cpupower frequency-set -g ondemand
+        cpupower frequency-set -g ondemand > /dev/null 2>&1
       )&
 
     # starting XBMC
@@ -66,13 +65,13 @@ fi
 
         case "$RET" in
           0)
-        poweroff -f
+             RUNLEVEL="poweroff"
             ;;
           64)
-        poweroff -f
+             RUNLEVEL="poweroff"
             ;;
           66)
-        reboot
+             RUNLEVEL="reboot"
             ;;
           255)
             echo "Abnormal Exit. Exited with code $RET"
@@ -85,3 +84,8 @@ fi
 
         usleep 250000
       done
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac

packages/mediacenter/xbmc/patches/xbmc-10.1-Dharma-011-add_xbmcvfs_module-0.2.patch

@@ -0,0 +1,448 @@
+diff -Naur xbmc-10.1-Dharma/xbmc/lib/libPython/xbmcmodule/Makefile xbmc-10.1-Dharma.patch/xbmc/lib/libPython/xbmcmodule/Makefile
+--- xbmc-10.1-Dharma/xbmc/lib/libPython/xbmcmodule/Makefile	2011-03-08 02:49:14.000000000 +0100
++++ xbmc-10.1-Dharma.patch/xbmc/lib/libPython/xbmcmodule/Makefile	2011-09-06 22:59:02.915548511 +0200
+@@ -1,8 +1,9 @@
+ INCLUDES=-I../../../.. -I. -I../../../ -I../../../linux -I../../../../guilib -I../../../utils -I../../../cores -I../../../../lib/jsoncpp/jsoncpp/include
+ 
+-SRCS=action.cpp controlbutton.cpp controlcheckmark.cpp control.cpp controlfadelabel.cpp controlimage.cpp controllabel.cpp controllist.cpp controlprogress.cpp controlslider.cpp controlspin.cpp controltextbox.cpp dialog.cpp GUIPythonWindow.cpp GUIPythonWindowDialog.cpp GUIPythonWindowXML.cpp GUIPythonWindowXMLDialog.cpp infotagmusic.cpp infotagvideo.cpp keyboard.cpp listitem.cpp player.cpp pyplaylist.cpp PythonPlayer.cpp pyutil.cpp window.cpp winxml.cpp winxmldialog.cpp xbmcguimodule.cpp xbmcmodule.cpp controlgroup.cpp xbmcplugin.cpp controlradiobutton.cpp PythonAddon.cpp xbmcaddonmodule.cpp
++SRCS=action.cpp controlbutton.cpp controlcheckmark.cpp control.cpp controlfadelabel.cpp controlimage.cpp controllabel.cpp controllist.cpp controlprogress.cpp controlslider.cpp controlspin.cpp controltextbox.cpp dialog.cpp GUIPythonWindow.cpp GUIPythonWindowDialog.cpp GUIPythonWindowXML.cpp GUIPythonWindowXMLDialog.cpp infotagmusic.cpp infotagvideo.cpp keyboard.cpp listitem.cpp player.cpp pyplaylist.cpp PythonPlayer.cpp pyutil.cpp window.cpp winxml.cpp winxmldialog.cpp xbmcguimodule.cpp xbmcmodule.cpp controlgroup.cpp xbmcplugin.cpp controlradiobutton.cpp PythonAddon.cpp xbmcaddonmodule.cpp xbmcvfsmodule.cpp
+ 
+ LIB=xbmcmodule.a
+ 
+ include ../../../../Makefile.include
+ -include $(patsubst %.cpp,%.P,$(patsubst %.c,%.P,$(SRCS)))
++
+diff -Naur xbmc-10.1-Dharma/xbmc/lib/libPython/xbmcmodule/xbmcmodule.cpp xbmc-10.1-Dharma.patch/xbmc/lib/libPython/xbmcmodule/xbmcmodule.cpp
+--- xbmc-10.1-Dharma/xbmc/lib/libPython/xbmcmodule/xbmcmodule.cpp	2011-03-08 02:49:14.000000000 +0100
++++ xbmc-10.1-Dharma.patch/xbmc/lib/libPython/xbmcmodule/xbmcmodule.cpp	2011-09-06 22:59:02.916548524 +0200
+@@ -64,6 +64,7 @@
+ #include "SectionLoader.h"
+ #include "Settings.h"
+ #include "LocalizeStrings.h"
++#include "utils/FileUtils.h"
+ 
+ // include for constants
+ #include "pyutil.h"
+@@ -958,6 +959,35 @@
+ 
+     return Py_BuildValue((char*)"b", exists);
+   }
++  
++  PyDoc_STRVAR(subHashAndFileSize__doc__,
++    "subHashAndFileSize(file)\n"
++    "\n"
++    "file        : file to calculate subtitle hash and size for"
++    "\n"
++    "example:\n"
++    " size,hash = xbmcvfs.subHashAndFileSize(file)\n"); 
++  PyObject* XBMC_subHashAndFileSize(PyObject *self, PyObject *args, PyObject *kwds)
++  {
++    PyObject *f_line;
++    if (!PyArg_ParseTuple(
++      args,
++      (char*)"O",
++      &f_line))
++    {
++      return NULL;
++    }
++    CStdString strSource;
++    if (!PyXBMCGetUnicodeString(strSource, f_line, 1)) return NULL;
++    
++    CStdString strSize;
++    CStdString strHash;
++    Py_BEGIN_ALLOW_THREADS
++    CFileUtils::SubtitleFileSizeAndHash(strSource, strSize, strHash);
++    Py_END_ALLOW_THREADS
++    
++    return Py_BuildValue((char*)"ss",strSize.c_str(), strHash.c_str());
++  } 
+ 
+   // define c functions to be used in python here
+   PyMethodDef xbmcMethods[] = {
+@@ -1005,6 +1035,8 @@
+     {(char*)"getCleanMovieTitle", (PyCFunction)XBMC_GetCleanMovieTitle, METH_VARARGS|METH_KEYWORDS, getCleanMovieTitle__doc__},
+ 
+     {(char*)"skinHasImage", (PyCFunction)XBMC_SkinHasImage, METH_VARARGS|METH_KEYWORDS, skinHasImage__doc__},
++    {(char*)"subHashAndFileSize", (PyCFunction)XBMC_subHashAndFileSize, METH_VARARGS, subHashAndFileSize__doc__},
++
+     {NULL, NULL, 0, NULL}
+   };
+ 
+diff -Naur xbmc-10.1-Dharma/xbmc/lib/libPython/xbmcmodule/xbmcvfsmodule.cpp xbmc-10.1-Dharma.patch/xbmc/lib/libPython/xbmcmodule/xbmcvfsmodule.cpp
+--- xbmc-10.1-Dharma/xbmc/lib/libPython/xbmcmodule/xbmcvfsmodule.cpp	1970-01-01 01:00:00.000000000 +0100
++++ xbmc-10.1-Dharma.patch/xbmc/lib/libPython/xbmcmodule/xbmcvfsmodule.cpp	2011-09-06 23:43:28.717382455 +0200
+@@ -0,0 +1,299 @@
++/*
++ *      Copyright (C) 2005-2011 Team XBMC
++ *      http://www.xbmc.org
++ *
++ *  This Program is free software; you can redistribute it and/or modify
++ *  it under the terms of the GNU General Public License as published by
++ *  the Free Software Foundation; either version 2, or (at your option)
++ *  any later version.
++ *
++ *  This Program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with XBMC; see the file COPYING.  If not, write to
++ *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
++ *  http://www.gnu.org/copyleft/gpl.html
++ *
++ */
++
++#include "system.h"
++#if (defined USE_EXTERNAL_PYTHON)
++#if (defined HAVE_LIBPYTHON2_6)
++#include <python2.6/Python.h>
++#elif (defined HAVE_LIBPYTHON2_5)
++#include <python2.5/Python.h>
++#elif (defined HAVE_LIBPYTHON2_4)
++#include <python2.4/Python.h>
++#else
++#error "Could not determine version of Python to use."
++#endif
++#else
++#include "python/Include/Python.h"
++#endif
++#include "../XBPythonDll.h"
++
++#include "FileSystem/Directory.h"
++#include "FileSystem/File.h"
++#include "pyutil.h"
++
++using namespace std;
++using namespace XFILE;
++using namespace PYXBMC;
++
++#ifndef __GNUC__
++#pragma code_seg("PY_TEXT")
++#pragma data_seg("PY_DATA")
++#pragma bss_seg("PY_BSS")
++#pragma const_seg("PY_RDATA")
++#endif
++
++#if defined(__GNUG__) && (__GNUC__>4) || (__GNUC__==4 && __GNUC_MINOR__>=2)
++#pragma GCC diagnostic ignored "-Wstrict-aliasing"
++#endif
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++  namespace xbmcvfs
++  {
++    /*****************************************************************
++     * start of xbmcvfs methods
++     *****************************************************************/
++    typedef struct {
++      PyObject_HEAD
++      CFile* pFile;
++    } File;
++
++    // copy() method
++    PyDoc_STRVAR(copy__doc__,
++      "copy(source, destination) -- copy file to destination, returns true/false.\n"
++      "\n"
++      "source          : file to copy.\n"
++      "destination     : destination file"
++      "\n"
++      "example:\n"
++      "  success = xbmcvfs.copy(source, destination)\n");
++
++    PyObject* vfs_copy(PyObject *self, PyObject *args)
++    {
++      PyObject *f_line;
++      PyObject *d_line;
++      if (!PyArg_ParseTuple(
++        args,
++        (char*)"OO",
++        &f_line,
++        &d_line))
++      {
++        return NULL;
++      }
++      CStdString strSource;
++      CStdString strDestnation;
++      bool bResult = true;
++
++      if (!PyXBMCGetUnicodeString(strSource, f_line, 1)) return NULL;
++      if (!PyXBMCGetUnicodeString(strDestnation, d_line, 1)) return NULL;
++      Py_BEGIN_ALLOW_THREADS
++      bResult = CFile::Cache(strSource, strDestnation);
++      Py_END_ALLOW_THREADS
++
++    return Py_BuildValue((char*)"b", bResult);
++    }
++    PyDoc_STRVAR(delete__doc__,
++      "delete(file)\n"
++      "\n"
++      "file        : file to delete"
++      "\n"
++      "example:\n"
++      "  xbmcvfs.delete(file)\n");
++
++    // delete a file
++    PyObject* vfs_delete(File *self, PyObject *args, PyObject *kwds)
++    {
++      PyObject *f_line;
++      if (!PyArg_ParseTuple(
++        args,
++        (char*)"O",
++        &f_line))
++      {
++        return NULL;
++      }
++      CStdString strSource;
++      if (!PyXBMCGetUnicodeString(strSource, f_line, 1)) return NULL;
++
++      Py_BEGIN_ALLOW_THREADS
++      self->pFile->Delete(strSource);
++      Py_END_ALLOW_THREADS
++
++      Py_INCREF(Py_None);
++      return Py_None;
++
++    }
++
++    PyDoc_STRVAR(rename__doc__,
++      "rename(file, newFileName)\n"
++      "\n"
++      "file        : file to reaname"
++      "newFileName : new filename, including the full path"
++      "\n"
++      "example:\n"
++      "  success = xbmcvfs.rename(file,newFileName)\n");
++
++    // rename a file
++    PyObject* vfs_rename(File *self, PyObject *args, PyObject *kwds)
++    {
++      PyObject *f_line;
++      PyObject *d_line;
++      if (!PyArg_ParseTuple(
++        args,
++        (char*)"OO",
++        &f_line,
++        &d_line))
++      {
++        return NULL;
++      }
++      CStdString strSource;
++      CStdString strDestnation;
++      if (!PyXBMCGetUnicodeString(strSource, f_line, 1)) return NULL;
++      if (!PyXBMCGetUnicodeString(strDestnation, d_line, 1)) return NULL;
++
++      bool bResult;
++      Py_BEGIN_ALLOW_THREADS
++      bResult = self->pFile->Rename(strSource,strDestnation);
++      Py_END_ALLOW_THREADS
++
++      return Py_BuildValue((char*)"b", bResult);
++
++    }
++
++    PyDoc_STRVAR(exists__doc__,
++      "exists(path)\n"
++      "\n"
++      "path        : file or folder"
++      "\n"
++      "example:\n"
++      "  success = xbmcvfs.exists(path)\n");
++
++    // check for a file or folder existance, mimics Pythons os.path.exists()
++    PyObject* vfs_exists(File *self, PyObject *args, PyObject *kwds)
++    {
++      PyObject *f_line;
++      if (!PyArg_ParseTuple(
++        args,
++        (char*)"O",
++        &f_line))
++      {
++        return NULL;
++      }
++      CStdString strSource;
++      if (!PyXBMCGetUnicodeString(strSource, f_line, 1)) return NULL;
++
++      bool bResult;
++
++      Py_BEGIN_ALLOW_THREADS
++      bResult = self->pFile->Exists(strSource, false);
++      Py_END_ALLOW_THREADS
++
++      return Py_BuildValue((char*)"b", bResult);
++    }
++
++    PyDoc_STRVAR(mkdir__doc__,
++      "mkdir(path) -- Create a folder.\n"
++      "\n"
++      "path        : folder\n"
++      "\n"
++      "example:\n"
++      " - success = xbmcvfs.mkdir(path)\n");
++    // make a directory
++    PyObject* vfs_mkdir(File *self, PyObject *args, PyObject *kwds)
++    {
++      PyObject *f_line;
++      if (!PyArg_ParseTuple(
++        args,
++        (char*)"O",
++        &f_line))
++      {
++        return NULL;
++      }
++      CStdString strSource;
++      if (!PyXBMCGetUnicodeString(strSource, f_line, 1)) return NULL;
++
++      bool bResult;
++
++      Py_BEGIN_ALLOW_THREADS
++      bResult = CDirectory::Create(strSource);
++      Py_END_ALLOW_THREADS
++
++      return Py_BuildValue((char*)"b", bResult);
++    }
++
++    PyDoc_STRVAR(rmdir__doc__,
++      "rmdir(path) -- Remove a folder.\n"
++      "\n"
++      "path        : folder\n"
++      "\n"
++      "example:\n"
++      " - success = xbmcvfs.rmdir(path)\n");
++    // remove a directory
++    PyObject* vfs_rmdir(File *self, PyObject *args, PyObject *kwds)
++    {
++      PyObject *f_line;
++      if (!PyArg_ParseTuple(
++        args,
++        (char*)"O",
++        &f_line))
++      {
++        return NULL;
++      }
++      CStdString strSource;
++      if (!PyXBMCGetUnicodeString(strSource, f_line, 1)) return NULL;
++
++      bool bResult;
++
++      Py_BEGIN_ALLOW_THREADS
++      bResult = CDirectory::Remove(strSource);
++      Py_END_ALLOW_THREADS
++
++      return Py_BuildValue((char*)"b", bResult);
++    }
++
++    // define c functions to be used in python here
++    PyMethodDef xbmcvfsMethods[] = {
++      {(char*)"copy", (PyCFunction)vfs_copy, METH_VARARGS, copy__doc__},
++      {(char*)"delete", (PyCFunction)vfs_delete, METH_VARARGS, delete__doc__},
++      {(char*)"rename", (PyCFunction)vfs_rename, METH_VARARGS, rename__doc__},
++      {(char*)"mkdir", (PyCFunction)vfs_mkdir, METH_VARARGS, mkdir__doc__},
++      {(char*)"rmdir", (PyCFunction)vfs_rmdir, METH_VARARGS, rmdir__doc__},
++      {(char*)"exists", (PyCFunction)vfs_exists, METH_VARARGS, exists__doc__},
++      {NULL, NULL, 0, NULL}
++    };
++
++    /*****************************************************************
++     * end of methods and python objects
++     * initxbmc(void);
++     *****************************************************************/
++
++
++    PyMODINIT_FUNC
++    DeinitVFSModule()
++    {
++      // no need to Py_DECREF our objects (see InitXBMCMVFSModule()) as they were created only
++      // so that they could be added to the module, which steals a reference.
++    }
++
++    PyMODINIT_FUNC
++    InitVFSModule()
++    {
++      // init general xbmc modules
++      PyObject* pXbmcvfsModule;
++      pXbmcvfsModule = Py_InitModule((char*)"xbmcvfs", xbmcvfsMethods);
++      if (pXbmcvfsModule == NULL) return;
++    }
++  }
++
++#ifdef __cplusplus
++}
++#endif
+diff -Naur xbmc-10.1-Dharma/xbmc/lib/libPython/XBPython.cpp xbmc-10.1-Dharma.patch/xbmc/lib/libPython/XBPython.cpp
+--- xbmc-10.1-Dharma/xbmc/lib/libPython/XBPython.cpp	2011-03-08 02:49:15.000000000 +0100
++++ xbmc-10.1-Dharma.patch/xbmc/lib/libPython/XBPython.cpp	2011-09-06 22:59:02.955549037 +0200
+@@ -119,6 +119,8 @@
+   void InitAddonModule(void);
+   void InitAddonTypes(void);
+   void DeinitAddonModule(void);
++  void InitVFSModule(void);
++  void DeinitVFSModule(void);
+ }
+ 
+ XBPython::XBPython()
+@@ -297,7 +299,8 @@
+   InitPluginModule(); // init xbmcplugin modules
+   InitGUIModule(); // init xbmcgui modules
+   InitAddonModule(); // init xbmcaddon modules
+-
++  InitVFSModule(); // init xbmcvfs modules
++  
+   // redirecting default output to debug console
+   if (PyRun_SimpleString(""
+         "import xbmc\n"
+@@ -325,6 +328,7 @@
+   DeinitPluginModule();
+   DeinitGUIModule();
+   DeinitAddonModule();
++  DeinitVFSModule();
+ }
+ 
+ /**
+diff -Naur xbmc-10.1-Dharma/xbmc/utils/FileUtils.cpp xbmc-10.1-Dharma.patch/xbmc/utils/FileUtils.cpp
+--- xbmc-10.1-Dharma/xbmc/utils/FileUtils.cpp	2011-03-08 02:49:14.000000000 +0100
++++ xbmc-10.1-Dharma.patch/xbmc/utils/FileUtils.cpp	2011-09-06 22:59:02.977549326 +0200
+@@ -72,3 +72,32 @@
+   }
+   return false;
+ }
++
++bool CFileUtils::SubtitleFileSizeAndHash(const CStdString &path, CStdString &strSize, CStdString &strHash)
++{
++  const size_t chksum_block_size = 8192;
++  
++  CFile file;
++  size_t i;
++  uint64_t hash = 0;
++  uint64_t buffer1[chksum_block_size*2];
++  uint64_t fileSize ;
++  // In natural language it calculates: size + 64k chksum of the first and last 64k
++  // (even if they overlap because the file is smaller than 128k).
++  file.Open(path, READ_NO_CACHE); //open file
++  file.Read(buffer1, chksum_block_size*sizeof(uint64_t)); //read first 64k
++  file.Seek(-(int64_t)chksum_block_size*sizeof(uint64_t), SEEK_END); //seek to the end of the file
++  file.Read(&buffer1[chksum_block_size], chksum_block_size*sizeof(uint64_t)); //read last 64k
++  
++  for (i=0;i<chksum_block_size*2;i++)
++    hash += buffer1[i];
++  
++  fileSize = file.GetLength();
++  
++  hash += fileSize; //add size
++  
++  file.Close(); //close file
++  strHash.Format("%"PRIx64"", hash); //format hash
++  strSize.Format("%d", fileSize);  // format size
++  return true;
++}
+diff -Naur xbmc-10.1-Dharma/xbmc/utils/FileUtils.h xbmc-10.1-Dharma.patch/xbmc/utils/FileUtils.h
+--- xbmc-10.1-Dharma/xbmc/utils/FileUtils.h	2011-03-08 02:49:14.000000000 +0100
++++ xbmc-10.1-Dharma.patch/xbmc/utils/FileUtils.h	2011-09-06 22:59:03.023549930 +0200
+@@ -6,4 +6,5 @@
+ public:
+   static bool DeleteItem(const CFileItemPtr &item);
+   static bool RenameFile(const CStdString &strFile);
++  static bool SubtitleFileSizeAndHash(const CStdString &path, CStdString &strSize, CStdString &strHash);
+ };

packages/mediacenter/xbmc/patches/xbmc-10.1-Dharma-041-add_tcp_socket_options_and_lock_dir_to_smb-0.1.patch

@@ -0,0 +1,12 @@
+diff -Naur xbmc-10.1-Dharma/xbmc/FileSystem/FileSmb.cpp xbmc-10.1-Dharma.patch/xbmc/FileSystem/FileSmb.cpp
+--- xbmc-10.1-Dharma/xbmc/FileSystem/FileSmb.cpp	2011-09-05 02:24:35.154994777 +0200
++++ xbmc-10.1-Dharma.patch/xbmc/FileSystem/FileSmb.cpp	2011-09-05 02:22:55.604582159 +0200
+@@ -122,6 +122,8 @@
+       // use the weaker LANMAN password hash in order to be compatible with older servers
+       fprintf(f, "\tclient lanman auth = yes\n");
+       fprintf(f, "\tlanman auth = yes\n");
++      fprintf(f, "\tsocket options = TCP_NODELAY IPTOS_LOWDELAY SO_RCVBUF=65536 SO_SNDBUF=65536\n");
++      fprintf(f, "\tlock directory = %s/.smb/\n", getenv("HOME"));
+ 
+       // set wins server if there's one. name resolve order defaults to 'lmhosts host wins bcast'.
+       // if no WINS server has been specified the wins method will be ignored.

packages/network/avahi/init.d/53_avahi

@@ -22,11 +22,19 @@
 #
 # runlevels: openelec, textmode
 
+case $RUNLEVEL in
+  boot)
     (
       wait_for_network
 
       progress "Starting Avahi Daemon"
-
         mkdir -p /var/run/avahi-daemon
         avahi-daemon -D
     )&
+    ;;
+
+  poweroff|reboot)
+    progress "Starting Avahi Daemon"
+      killall avahi-daemon
+    ;;
+esac

packages/network/connman/init.d/21_network

@@ -22,6 +22,8 @@
 #
 # runlevels: openelec, installer, textmode
 
+case $RUNLEVEL in
+  boot)
     if [ -f /var/config/settings.conf ]; then
       . /var/config/settings.conf
 
@@ -194,3 +196,8 @@ fi
           usleep 250000
         done
     )&
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac

packages/network/netmount/init.d/59_netmount

@@ -22,9 +22,16 @@
 #
 # runlevels: openelec, textmode
 
+case $RUNLEVEL in
+  boot)
     (
       wait_for_network
 
       progress "mounting Network shares"
         netmount > /dev/null 2>&1
     )&
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac

packages/network/openssh/build

@@ -26,7 +26,7 @@ export LD="$TARGET_CC"
 export LDFLAGS="$TARGET_CFLAGS $TARGET_LDFLAGS"
 
 cd $PKG_BUILD
-ac_cv_have_space_for_dirent_d_name=yes \
+#ac_cv_have_space_for_dirent_d_name=yes \
 ./configure --host=$TARGET_NAME \
             --build=$HOST_NAME \
             --prefix=/usr \

packages/network/openssh/init.d/51_sshd

@@ -22,7 +22,6 @@
 #
 # runlevels: openelec, textmode
 
-(
       RSA1_KEY="/storage/.cache/ssh/ssh_host_key"
       RSA2_KEY="/storage/.cache/ssh/ssh_host_rsa_key"
       DSA2_KEY="/storage/.cache/ssh/ssh_host_dsa_key"
@@ -30,6 +29,9 @@
       KEYGEN="/usr/bin/ssh-keygen"
       SSHD="/usr/sbin/sshd"
 
+case $RUNLEVEL in
+  boot)
+    (
       # Check for the SSH1 RSA key
         if [ ! -f $RSA1_KEY ] ; then
           progress "SSH: generating SSH1 RSA key"
@@ -72,5 +74,11 @@
         mkdir -p /var/empty
         chmod -R 600 /var/empty
         $SSHD
-
     )&
+    ;;
+
+  poweroff|reboot)
+    progress "Stopping SSH Server"
+      killall sshd
+    ;;
+esac

packages/network/openssh/meta

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="openssh"
-PKG_VERSION="5.8p2"
+PKG_VERSION="5.9p1"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="OSS"

packages/network/openssh/patches/openssh-5.8p2-000-crosscompiling.patch

@@ -1,53 +0,0 @@
-diff -Naur openssh-5.8p1-old/configure.ac openssh-5.8p1-new/configure.ac
---- openssh-5.8p1-old/configure.ac	2011-02-21 17:41:23.000000000 -0800
-+++ openssh-5.8p1-new/configure.ac	2011-02-21 17:42:20.000000000 -0800
-@@ -41,7 +41,7 @@
- AC_PROG_RANLIB
- AC_PROG_INSTALL
- AC_PROG_EGREP
--AC_PATH_PROG(AR, ar)
-+AC_PATH_TOOL(AR, ar)
- AC_PATH_PROG(CAT, cat)
- AC_PATH_PROG(KILL, kill)
- AC_PATH_PROGS(PERL, perl5 perl)
-@@ -1188,25 +1188,25 @@
- 
- AC_CHECK_DECLS(GLOB_NOMATCH, , , [#include <glob.h>])
- 
--AC_MSG_CHECKING([whether struct dirent allocates space for d_name])
--AC_RUN_IFELSE(
--	[AC_LANG_SOURCE([[
-+AC_CACHE_CHECK(
-+	[whether struct dirent allocates space for d_name],
-+	[ac_cv_have_space_for_dirent_d_name],
-+	[AC_RUN_IFELSE(
-+		[AC_LANG_SOURCE([[
- #include <sys/types.h>
- #include <dirent.h>
- int main(void){struct dirent d;exit(sizeof(d.d_name)<=sizeof(char));}
--	]])],
--	[AC_MSG_RESULT(yes)],
--	[
--		AC_MSG_RESULT(no)
--		AC_DEFINE(BROKEN_ONE_BYTE_DIRENT_D_NAME, 1,
--			[Define if your struct dirent expects you to
--			allocate extra space for d_name])
--	],
--	[
--		AC_MSG_WARN([cross compiling: assuming BROKEN_ONE_BYTE_DIRENT_D_NAME])
--		AC_DEFINE(BROKEN_ONE_BYTE_DIRENT_D_NAME)
--	]
-+		]])],
-+		[ ac_cv_have_space_for_dirent_d_name="yes" ],
-+		[ ac_cv_have_space_for_dirent_d_name="no"  ],
-+		[ ac_cv_have_space_for_dirent_d_name="no"  ]
-+	)]
- )
-+if test "x$ac_cv_have_space_for_dirent_d_name" = "xno" ; then
-+	AC_DEFINE(BROKEN_ONE_BYTE_DIRENT_D_NAME, 1,
-+		[Define if your struct dirent expects you to
-+		allocate extra space for d_name])
-+fi
- 
- AC_MSG_CHECKING([for /proc/pid/fd directory])
- if test -d "/proc/$$/fd" ; then

packages/network/openssh/patches/openssh-5.8p2-001-abstract_socket.patch

@@ -1,49 +0,0 @@
-diff -Naur openssh-5.8p1-old/channels.c openssh-5.8p1-new/channels.c
---- openssh-5.8p1-old/channels.c	2010-11-30 17:02:35.000000000 -0800
-+++ openssh-5.8p1-new/channels.c	2011-02-21 17:41:34.000000000 -0800
-@@ -61,6 +61,7 @@
- #include <termios.h>
- #include <unistd.h>
- #include <stdarg.h>
-+#include <stddef.h>
- 
- #include "openbsd-compat/sys-queue.h"
- #include "xmalloc.h"
-@@ -3353,6 +3354,8 @@
- {
- 	int sock;
- 	struct sockaddr_un addr;
-+	int abstract = 0;
-+	int addrsize = 0;
- 
- 	sock = socket(AF_UNIX, SOCK_STREAM, 0);
- 	if (sock < 0)
-@@ -3360,8 +3363,15 @@
- 	memset(&addr, 0, sizeof(addr));
- 	addr.sun_family = AF_UNIX;
- 	strlcpy(addr.sun_path, pathname, sizeof addr.sun_path);
--	if (connect(sock, (struct sockaddr *)&addr, sizeof(addr)) == 0)
-+	addrsize = offsetof(struct sockaddr_un, sun_path) + strlen(addr.sun_path);
-+	if (addr.sun_path[0] = '@')
-+		abstract = 1;
-+	if (abstract)
-+		addr.sun_path[0] = '\0';
-+	if (connect(sock, (struct sockaddr *)&addr, addrsize) == 0)
- 		return sock;
-+	if (abstract)
-+		addr.sun_path[0] = '@';
- 	close(sock);
- 	error("connect %.100s: %.100s", addr.sun_path, strerror(errno));
- 	return -1;
-diff -Naur openssh-5.8p1-old/defines.h openssh-5.8p1-new/defines.h
---- openssh-5.8p1-old/defines.h	2011-01-17 02:15:31.000000000 -0800
-+++ openssh-5.8p1-new/defines.h	2011-02-21 17:41:34.000000000 -0800
-@@ -411,7 +411,7 @@
- #  ifdef __hpux
- #    define X_UNIX_PATH "/var/spool/sockets/X11/%u"
- #  else
--#    define X_UNIX_PATH "/tmp/.X11-unix/X%u"
-+#    define X_UNIX_PATH "@/tmp/.X11-unix/X%u"
- #  endif
- #endif /* X_UNIX_PATH */
- #define _PATH_UNIX_X X_UNIX_PATH

packages/network/samba/scripts/52_samba

@@ -22,6 +22,11 @@
 #
 # runlevels: openelec, textmode
 
+SMB_USERCONF="/storage/.config/samba.conf"
+SMB_DEFCONF="/etc/samba/smb.conf"
+
+case $RUNLEVEL in
+  boot)
     (
       if [ -f /var/config/settings.conf ]; then
         . /var/config/settings.conf
@@ -32,9 +37,6 @@
 
           progress  "Starting Samba server"
 
-      SMB_USERCONF="/storage/.config/samba.conf"
-      SMB_DEFCONF="/etc/samba/smb.conf"
-
           if [ -f $SMB_USERCONF ]; then
             SMB_ARG="--configfile=$SMB_USERCONF"
           else
@@ -47,3 +49,11 @@
         fi
       fi
     )&
+    ;;
+
+  poweroff|reboot)
+    progress  "Stopping Samba server"
+      killall nmbd
+      killall smbd
+    ;;
+esac

packages/sysutils/ConsoleKit/init.d/34_ConsoleKit

@@ -22,8 +22,14 @@
 #
 # runlevels: openelec, textmode
 
+case $RUNLEVEL in
+  boot)
     progress "starting ConsoleKit daemon"
 
       install -m 755 -d /var/log/ConsoleKit
       install -m 755 -d /var/run/ConsoleKit
+    ;;
 
+  poweroff|reboot)
+    ;;
+esac

packages/sysutils/ConsoleKit/scripts/ck-system-restart

@@ -20,4 +20,20 @@
 #  http://www.gnu.org/copyleft/gpl.html
 ################################################################################
 
+. /etc/profile
+
+  progress "Reboot the syste"
+    RET=0
+
+    RUNLEVEL="reboot"
+
+    for script in `ls -r1 /etc/init.d/*`; do
+      if grep -q -e "^# runlevels:.*$MODE" $script; then
+        . $script
+        S_RET=$?
+        test $S_RET -ge $RET && RET=$S_RET
+      fi
+    done
+
+    sync
     reboot

packages/sysutils/ConsoleKit/scripts/ck-system-stop

@@ -20,4 +20,20 @@
 #  http://www.gnu.org/copyleft/gpl.html
 ################################################################################
 
-poweroff
+. /etc/profile
+
+  progress "Poweroff the system"
+    RET=0
+
+    RUNLEVEL="poweroff"
+
+    for script in `ls -r1 /etc/init.d/*`; do
+      if grep -q -e "^# runlevels:.*$MODE" $script; then
+        . $script
+        S_RET=$?
+        test $S_RET -ge $RET && RET=$S_RET
+      fi
+    done
+
+    sync
+    poweroff -f

packages/sysutils/busybox/init.d/01_mount-filesystem

@@ -23,5 +23,31 @@
 #
 # runlevels: openelec, installer, textmode
 
+case $RUNLEVEL in
+  boot)
     progress "mounting needed filesystems"
+      mount -n -t devtmpfs none /dev
+      mkdir -p /dev/pts
+        mount -n -t devpts -o gid=5,mode=620 none /dev/pts
+      mkdir -p /dev/shm
+        mount -n -t tmpfs none /dev/shm
+      mount -n -t tmpfs none /run
       mount -n -t ramfs none /var
+      mount "$disk" /storage -o rw,noatime > /dev/null 2>&1
+    ;;
+
+  poweroff|reboot)
+    progress "unmounting filesystems"
+      for i in 1 2 3 4 5 6 7 8 9 10; do
+        echo "umount /storage"
+        ERR_ENV=1
+        umount /storage
+        [ "$?" -eq "0" ] && ERR_ENV=0 && break
+        usleep 1000000
+      done
+      if [ "$ERR_ENV" -ne "0" ]; then
+        mount -o remount,ro /storage
+        umount -l /storage
+      fi
+    ;;
+esac

packages/sysutils/busybox/init.d/02_make-directorys

@@ -23,6 +23,8 @@
 #
 # runlevels: openelec, installer, textmode
 
+case $RUNLEVEL in
+  boot)
     progress "make variable directory structure"
       mkdir -p /var/cache \
                /var/lock \
@@ -58,3 +60,10 @@ progress "make variable directory structure"
 
       mkdir -p /var/lib/udisks
       mkdir -p /var/lib/upower
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac
+
+

packages/sysutils/busybox/init.d/03_debugshell

@@ -25,7 +25,8 @@
 TTY="3"
 
 if [ "$DEBUG" = "yes" ]; then
-
+  case $RUNLEVEL in
+    boot)
       echo "###########################################"
       echo "## it seems we are running in Debug mode ##"
       echo "## starting debugging shell on console $TTY ##"
@@ -33,5 +34,9 @@ if [ "$DEBUG" = "yes" ]; then
       echo "###########################################"
 
       openvt -w -c $TTY /bin/sh &
+      ;;
 
+    poweroff|reboot)
+      ;;
+  esac
 fi

packages/sysutils/busybox/init.d/04_systemconfig

@@ -25,9 +25,16 @@
 
 OPENELEC_SETTINGS="$HOME/.xbmc/userdata/addon_data/os.openelec.settings/settings.xml"
 
+case $RUNLEVEL in
+  boot)
     if [ -f "$OPENELEC_SETTINGS" ]; then
       progress "creating system settings"
 
         mkdir -p /var/config
         cat "$OPENELEC_SETTINGS" | awk -F\" '{print $2"=\""$4"\""}' | sed '/^=/d' > /var/config/settings.conf
     fi
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac

packages/sysutils/busybox/init.d/04_userconfig

@@ -23,6 +23,8 @@
 #
 # runlevels: openelec, textmode
 
+case $RUNLEVEL in
+  boot)
     if [ -d /usr/config ]; then
       progress "copy userconfig and samples"
 
@@ -43,3 +45,8 @@ if [ -d /usr/config ]; then
           cp $sample /storage/.config/$sample
         done
     fi
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac

packages/sysutils/busybox/init.d/08_syslogd

@@ -23,6 +23,8 @@
 #
 # runlevels: openelec, installer, textmode
 
+case $RUNLEVEL in
+  boot)
     (
       progress "Starting Syslog daemon"
         syslogd
@@ -30,3 +32,13 @@
       progress "Starting Kernellog daemon"
         klogd
     )&
+    ;;
+
+  poweroff|reboot)
+    progress "Stopping Kernellog daemon"
+      killall klogd
+
+    progress "Stopping Syslog daemon"
+      killall syslogd
+    ;;
+esac

packages/sysutils/busybox/init.d/10_cdrom

@@ -23,5 +23,12 @@
 #
 # runlevels: openelec, installer, textmode
 
+case $RUNLEVEL in
+  boot)
     progress "Setup some CDROM settings"
       sysctl -w dev.cdrom.lock=0 > /dev/null 2>&1 &
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac

packages/sysutils/busybox/init.d/99_shell

@@ -24,6 +24,8 @@
 
 TTY="1"
 
+case $RUNLEVEL in
+  boot)
     echo "###########################################"
     echo "## it seems we are running in Text mode. ##"
     echo "## .... starting shell on console $TTY .... ##"
@@ -33,3 +35,8 @@ echo "###########################################"
     while true; do
       openvt -w -c $TTY /bin/sh
     done
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac

packages/sysutils/busybox/meta

@@ -19,13 +19,13 @@
 ################################################################################
 
 PKG_NAME="busybox"
-PKG_VERSION="1.19.1"
+PKG_VERSION="1.19.2"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://www.busybox.net"
 PKG_URL="http://busybox.net/downloads/$PKG_NAME-$PKG_VERSION.tar.bz2"
-PKG_DEPENDS="grep hdparm speedcontrol pastebinit"
+PKG_DEPENDS="kexec-tools grep hdparm speedcontrol pastebinit"
 PKG_BUILD_DEPENDS="toolchain busybox-hosttools"
 PKG_PRIORITY="required"
 PKG_SECTION="system"

packages/sysutils/busybox/patches/busybox-1.19.1-match_fstype_fix.patch

@@ -1,16 +0,0 @@
-diff -Naur busybox-1.19.1/libbb/match_fstype.c busybox-1.19.1.patch/libbb/match_fstype.c
---- busybox-1.19.1/libbb/match_fstype.c	2011-08-28 12:59:56.000000000 +0200
-+++ busybox-1.19.1.patch/libbb/match_fstype.c	2011-09-03 02:10:51.480283260 +0200
-@@ -10,10 +10,10 @@
-  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
-  */
- 
--#ifdef HAVE_MNTENT_H
--
- #include "libbb.h"
- 
-+#ifdef HAVE_MNTENT_H
-+
- int FAST_FUNC match_fstype(const struct mntent *mt, const char *t_fstype)
- {
- 	int match = 1;

packages/sysutils/busybox/patches/busybox-1.19.1-patch.patch

@@ -1,31 +0,0 @@
---- busybox-1.19.1/editors/patch.c
-+++ busybox-1.19.1-patch/editors/patch.c
-@@ -70,8 +70,7 @@ struct double_list {
- 
- // Free all the elements of a linked list
- // Call freeit() on each element before freeing it.
--static
--void dlist_free(struct double_list *list, void (*freeit)(void *data))
-+static void dlist_free(struct double_list *list, void (*freeit)(void *data))
- {
- 	while (list) {
- 		void *pop = list;
-@@ -83,8 +82,7 @@ void dlist_free(struct double_list *list
- }
- 
- // Add an entry before "list" element in (circular) doubly linked list
--static
--struct double_list *dlist_add(struct double_list **list, char *data)
-+static struct double_list *dlist_add(struct double_list **list, char *data)
- {
- 	struct double_list *llist;
- 	struct double_list *line = xmalloc(sizeof(*line));
-@@ -232,7 +230,7 @@ static int apply_one_hunk(void)
- 		else matcheof = 0;
- 		if (PATCH_DEBUG) fdprintf(2, "HUNK:%s\n", plist->data);
- 	}
--	matcheof = matcheof < TT.context;
-+	matcheof = !matcheof || matcheof < TT.context;
- 
- 	if (PATCH_DEBUG) fdprintf(2,"MATCHEOF=%c\n", matcheof ? 'Y' : 'N');
- 

packages/sysutils/busybox/profile.d/path.conf

@@ -25,9 +25,4 @@
 
 PATH="/bin:/sbin:/usr/bin:/usr/sbin"
 
-# hack: add addons to $PATH
-  for i in `find /storage/.xbmc/addons/* -name bin -type d`; do
-    PATH="$PATH:$i"
-  done
-
 export PATH

packages/sysutils/busybox/profile.d/runlevel.conf

@@ -24,14 +24,14 @@
 ################################################################################
 
 # getting runlevel
-  RUNLEVEL="openelec"
+  MODE="openelec"
 
   if test "$TEXTMODE" = yes; then
-    RUNLEVEL="textmode"
+    MODE="textmode"
   fi
 
   if test "$INSTALLER" = yes; then
-    RUNLEVEL="installer"
+    MODE="installer"
   fi
 
-export RUNLEVEL
+export MODE

packages/sysutils/busybox/scripts/init

@@ -26,16 +26,6 @@
 
   echo 0 > /sys/devices/virtual/graphics/fbcon/cursor_blink
 
-  mount -n -t devtmpfs none /dev
-
-  mkdir -p /dev/pts
-  mount -n -t devpts -o gid=5,mode=620 none /dev/pts
-
-  mkdir -p /dev/shm
-  mount -n -t tmpfs none /dev/shm
-
-  mount -n -t tmpfs none /run
-
 # showing version
   lsb_release
 
@@ -46,8 +36,10 @@
   progress "Starting Init Scripts"
     RET=0
 
-    for script in /etc/init.d/*; do
+    RUNLEVEL="boot"
-      if grep -q -e "^# runlevels:.*$RUNLEVEL" $script; then
+
+    for script in `ls -1 /etc/init.d/*`; do
+      if grep -q -e "^# runlevels:.*$MODE" $script; then
         . $script
         S_RET=$?
         test $S_RET -ge $RET && RET=$S_RET

packages/sysutils/dbus/init.d/14_dbus

@@ -23,6 +23,8 @@
 #
 # runlevels: openelec, textmode
 
+case $RUNLEVEL in
+  boot)
     (
       progress "Starting D-BUS"
 
@@ -30,3 +32,10 @@
         dbus-uuidgen --ensure
         dbus-daemon --system
     )&
+    ;;
+
+  poweroff|reboot)
+    progress "Stopping D-BUS"
+      killall dbus-daemon
+    ;;
+esac

packages/sysutils/fuse/init.d/15_fuse

@@ -23,5 +23,14 @@
 #
 # runlevels: openelec, textmode
 
+case $RUNLEVEL in
+  boot)
     progress "Starting Fuse"
       mount -t fusectl fusectl /sys/fs/fuse/connections >/dev/null 2>&1
+    ;;
+
+  poweroff|reboot)
+    progress "Stopping Fuse"
+      umount /sys/fs/fuse/connections
+    ;;
+esac

packages/sysutils/kexec-tools/build

@@ -0,0 +1,41 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2011 Stephan Raue (stephan@openelec.tv)
+#
+#  This Program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#
+#  This Program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.tv; see the file COPYING.  If not, write to
+#  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+#  http://www.gnu.org/copyleft/gpl.html
+################################################################################
+
+. config/options $1
+
+CFLAGS="-O2" # -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2"
+LDFLAGS=""
+
+cd $PKG_BUILD
+./configure --host=$TARGET_NAME \
+            --build=$HOST_NAME \
+            --prefix=/usr \
+            --sysconfdir=/etc \
+            --datadir=/usr/share \
+            --libexecdir=/usr/lib/upower \
+            --localstatedir=/var \
+            --without-gamecube \
+            --with-zlib \
+            --without-lzma \
+            --without-xen \
+
+make

packages/sysutils/kexec-tools/install

@@ -0,0 +1,26 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2011 Stephan Raue (stephan@openelec.tv)
+#
+#  This Program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#
+#  This Program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.tv; see the file COPYING.  If not, write to
+#  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+#  http://www.gnu.org/copyleft/gpl.html
+################################################################################
+
+. config/options $1
+
+mkdir -p $INSTALL/usr/sbin
+  cp $PKG_BUILD/build/sbin/kexec $INSTALL/usr/sbin

packages/sysutils/kexec-tools/meta

@@ -0,0 +1,36 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2011 Stephan Raue (stephan@openelec.tv)
+#
+#  This Program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#
+#  This Program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.tv; see the file COPYING.  If not, write to
+#  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+#  http://www.gnu.org/copyleft/gpl.html
+################################################################################
+
+PKG_NAME="kexec-tools"
+PKG_VERSION="2.0.2"
+PKG_REV="1"
+PKG_ARCH="any"
+PKG_LICENSE="GPL"
+PKG_SITE="http://www.kernel.org/pub/linux/kernel/people/horms/"
+PKG_URL="http://horms.net/projects/kexec/kexec-tools/$PKG_NAME-$PKG_VERSION.tar.bz2"
+PKG_DEPENDS="zlib"
+PKG_BUILD_DEPENDS="toolchain zlib"
+PKG_PRIORITY="optional"
+PKG_SECTION="system"
+PKG_SHORTDESC="kexec-tools: the user-space portion of kexec"
+PKG_LONGDESC="kexec-tools is the user-space portion of kexec, a tool to load another kernel from the currently executing Linux kernel."
+PKG_IS_ADDON="no"
+
+PKG_AUTORECONF="yes"

packages/sysutils/lcdproc/init.d/63_lcdproc

@@ -22,6 +22,8 @@
 #
 # runlevels: openelec, textmode
 
+case $RUNLEVEL in
+  boot)
     (
       if [ -f /var/config/settings.conf ]; then
         . /var/config/settings.conf
@@ -47,3 +49,10 @@
         fi
       fi
     )&
+    ;;
+
+  poweroff|reboot)
+    progress "Stopping LCD daemon"
+      killall LCDd
+    ;;
+esac

packages/sysutils/remote/atvclient/init.d/63_atvclient

@@ -22,8 +22,17 @@
 #
 # runlevels: openelec, textmode
 
+case $RUNLEVEL in
+  boot)
     (
       progress "starting ATVclient"
         mkdir -p /storage/.cache
         atvclient -m > /dev/null 2>&1
     )&
+    ;;
+
+  poweroff|reboot)
+    progress "stopping ATVclient"
+      killall atvclient
+    ;;
+esac

packages/sysutils/remote/eventlircd/init.d/62_eventlircd

@@ -22,8 +22,17 @@
 #
 # runlevels: openelec, textmode
 
+case $RUNLEVEL in
+  boot)
     (
       progress "starting eventlircd"
         mkdir -p /var/run/lirc
         eventlircd --evmap=/etc/eventlircd.d --socket=/var/run/lirc/lircd --release=_UP
     )&
+    ;;
+
+  poweroff|reboot)
+    progress "starting eventlircd"
+      killall eventlircd
+    ;;
+esac

packages/sysutils/remote/irserver/init.d/61_irserver

@@ -25,6 +25,8 @@
 [ -f /storage/.config/remote.conf ] && . /storage/.config/remote.conf
 [ -f /storage/.config/lcd.conf ] && . /storage/.config/lcd.conf
 
+case $RUNLEVEL in
+  boot)
     if [ "$REMOTE_BACKEND" = "irtrans" -o "$LCD_DRIVER" = "irtrans" ]; then
 
       progress "Starting IRtrans daemon"
@@ -38,3 +40,10 @@ if [ "$REMOTE_BACKEND" = "irtrans" -o "$LCD_DRIVER" = "irtrans" ]; then
                $IRSERVER_ARG -daemon /dev/irtrans0 > /dev/null 2>&1
 
     fi
+    ;;
+
+  poweroff|reboot)
+    progress "Stopping IRtrans daemon"
+      killall irserver
+    ;;
+esac

packages/sysutils/udev/init.d/11_udevd

@@ -23,7 +23,16 @@
 #
 # runlevels: openelec, installer, textmode
 
+case $RUNLEVEL in
+  boot)
     progress "starting udev daemon"
       echo -e '\000\000\000\000' > /proc/sys/kernel/hotplug
       mkdir -p /dev/rules.d
       udevd --daemon
+    ;;
+
+  poweroff|reboot)
+    progress "stopping udev daemon"
+      killall udevd
+    ;;
+esac

packages/sysutils/udev/init.d/12_udev-monitor

@@ -23,7 +23,14 @@
 #
 # runlevels: openelec, installer, textmode
 
-(
+case $RUNLEVEL in
+  boot)
     progress "monitoring udev events"
-    udevadm monitor -e > /dev/udev.log
+      udevadm monitor -e > /dev/udev.log &
-)&
+    ;;
+
+  poweroff|reboot)
+    progress "Stopping udev monitor"
+      killall udevadm
+    ;;
+esac

packages/sysutils/udev/init.d/13_udev-trigger

@@ -23,8 +23,15 @@
 #
 # runlevels: openelec, installer, textmode
 
+case $RUNLEVEL in
+  boot)
     (
       progress "request udev events from the kernel"
         udevadm trigger --action=add
         udevadm settle
     )&
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac

packages/sysutils/util-linux/init.d/32_swapfile

@@ -23,6 +23,8 @@
 #
 # runlevels: openelec, textmode
 
+case $RUNLEVEL in
+  boot)
     (
       INSTALLED_MEMORY=`cat /proc/meminfo | grep 'MemTotal:' | awk '{print $2}'`
       SWAP=`blkid -t TYPE="swap" -o device`
@@ -49,3 +51,8 @@
         fi
       fi
     )&
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac

packages/tools/autoupdate/scripts/autoupdate.devel

@@ -43,7 +43,7 @@ fi
 download () {
   case "$DL_METHOD" in
           wget)
-            wget -c $1 -P $TMP_DIR
+            wget -c $1 -P $TMP_DIR > /dev/null 2>&1
             ;;
           scp)
             scp $SCP_ARG "$1" $TMP_DIR

packages/tools/autoupdate/scripts/autoupdate.release

@@ -43,7 +43,7 @@ fi
 download () {
   case "$DL_METHOD" in
           wget)
-            wget -c $1 -P $TMP_DIR
+            wget -c $1 -P $TMP_DIR > /dev/null 2>&1
             ;;
           scp)
             scp $SCP_ARG "$1" $TMP_DIR

packages/x11/app/setxkbmap/init.d/72_keyboard

@@ -22,6 +22,8 @@
 #
 # runlevels: openelec
 
+case $RUNLEVEL in
+  boot)
     (
       if [ -f /var/config/settings.conf ]; then
         . /var/config/settings.conf
@@ -43,3 +45,8 @@
           fi
       fi
     )&
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac

packages/x11/driver/xf86-video-intel/build

@@ -34,7 +34,7 @@ cd $PKG_BUILD
             --enable-dri \
             --enable-kms-only \
             --disable-xvmc \
-            --enable-sna \
+            --disable-sna \
             --with-xorg-module-dir=$XORG_PATH_MODULES
 
 make

packages/x11/other/ratpoison/init.d/73_ratpoison

@@ -22,6 +22,8 @@
 #
 # runlevels: openelec
 
+case $RUNLEVEL in
+  boot)
     (
       progress "starting Windowmanager"
 
@@ -31,3 +33,8 @@
       # starting ratpoison
         DISPLAY=:0.0 ratpoison > /dev/null 2>&1
     )&
+    ;;
+
+  poweroff|reboot)
+    ;;
+esac

packages/x11/xserver/xorg-server/init.d/70_xorg

@@ -0,0 +1,34 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2011 Stephan Raue (stephan@openelec.tv)
+#
+#  This Program is free software; you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2, or (at your option)
+#  any later version.
+#
+#  This Program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.tv; see the file COPYING.  If not, write to
+#  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+#  http://www.gnu.org/copyleft/gpl.html
+################################################################################
+
+#
+# mounting needed filesystems
+#
+# runlevels: openelec, installer, textmode
+
+case $RUNLEVEL in
+  boot)
+    # dont do anything here, we start xorg per udev
+    ;;
+  poweroff|reboot)
+    progress "stopping Xorg"
+      killall Xorg
+    ;;
+esac

packages/x11/xserver/xorg-server/scripts/xorg_start

@@ -22,7 +22,7 @@
 
 . /etc/profile
 
-if [ "$RUNLEVEL" = openelec ]; then
+if [ "$MODE" = openelec ]; then
 
   logger -t Xorg "### starting Xorg with driver ${xorg_driver} ###"
 

projects/ATV/linux/linux.i386.conf

@@ -181,7 +181,6 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -363,11 +362,6 @@ CONFIG_X86_CPUID=y
 CONFIG_NOHIGHMEM=y
 # CONFIG_HIGHMEM4G is not set
 # CONFIG_HIGHMEM64G is not set
-# CONFIG_VMSPLIT_3G is not set
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-# CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_X86_PAE is not set
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -417,7 +411,7 @@ CONFIG_HZ_300=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=300
 CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
 CONFIG_PHYSICAL_START=0x1000000
 # CONFIG_RELOCATABLE is not set
 CONFIG_PHYSICAL_ALIGN=0x1000000
@@ -465,7 +459,6 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_STAT is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set

projects/Fusion/linux/linux.i386.conf

@@ -405,7 +405,7 @@ CONFIG_HZ_300=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=300
 CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 # CONFIG_RELOCATABLE is not set
@@ -2128,7 +2128,7 @@ CONFIG_SND_HDA_CODEC_REALTEK=y
 CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
 # CONFIG_SND_HDA_CODEC_ANALOG is not set
 CONFIG_SND_HDA_CODEC_SIGMATEL=y
-# CONFIG_SND_HDA_CODEC_VIA is not set
+CONFIG_SND_HDA_CODEC_VIA=y
 CONFIG_SND_HDA_CODEC_HDMI=y
 # CONFIG_SND_HDA_CODEC_CIRRUS is not set
 # CONFIG_SND_HDA_CODEC_CONEXANT is not set

projects/Fusion/linux/linux.x86_64.conf

@@ -369,7 +369,7 @@ CONFIG_HZ_300=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=300
 CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 # CONFIG_RELOCATABLE is not set

projects/Generic/linux/linux.i386.conf

@@ -183,7 +183,6 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -360,11 +359,6 @@ CONFIG_X86_CPUID=y
 # CONFIG_NOHIGHMEM is not set
 CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
-# CONFIG_VMSPLIT_3G is not set
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-# CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_HIGHMEM=y
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -413,7 +407,7 @@ CONFIG_HZ_300=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=300
 CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 # CONFIG_RELOCATABLE is not set
@@ -470,7 +464,6 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_STAT is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -1177,11 +1170,13 @@ CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_PLX=m
 CONFIG_HOSTAP_PCI=m
 CONFIG_IPW2100=m
-# CONFIG_IPW2100_MONITOR is not set
+CONFIG_IPW2100_MONITOR=y
 # CONFIG_IPW2100_DEBUG is not set
 CONFIG_IPW2200=m
-# CONFIG_IPW2200_MONITOR is not set
+CONFIG_IPW2200_MONITOR=y
-# CONFIG_IPW2200_QOS is not set
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
 # CONFIG_IPW2200_DEBUG is not set
 CONFIG_LIBIPW=m
 # CONFIG_LIBIPW_DEBUG is not set
@@ -2272,6 +2267,7 @@ CONFIG_SND_DMA_SGBUF=y
 # CONFIG_SND_OPL4_LIB_SEQ is not set
 # CONFIG_SND_SBAWE_SEQ is not set
 # CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=m
 CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
 CONFIG_SND_PCI=y
@@ -2290,7 +2286,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set

projects/Generic_OSS/linux/linux.i386.conf

@@ -183,7 +183,6 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -360,11 +359,6 @@ CONFIG_X86_CPUID=y
 # CONFIG_NOHIGHMEM is not set
 CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
-# CONFIG_VMSPLIT_3G is not set
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-# CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_HIGHMEM=y
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -413,7 +407,7 @@ CONFIG_HZ_300=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=300
 CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 # CONFIG_RELOCATABLE is not set
@@ -470,7 +464,6 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_STAT is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -1174,11 +1167,13 @@ CONFIG_HOSTAP_FIRMWARE=y
 CONFIG_HOSTAP_PLX=m
 CONFIG_HOSTAP_PCI=m
 CONFIG_IPW2100=m
-# CONFIG_IPW2100_MONITOR is not set
+CONFIG_IPW2100_MONITOR=y
 # CONFIG_IPW2100_DEBUG is not set
 CONFIG_IPW2200=m
-# CONFIG_IPW2200_MONITOR is not set
+CONFIG_IPW2200_MONITOR=y
-# CONFIG_IPW2200_QOS is not set
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
 # CONFIG_IPW2200_DEBUG is not set
 CONFIG_LIBIPW=m
 # CONFIG_LIBIPW_DEBUG is not set
@@ -2270,6 +2265,7 @@ CONFIG_SND_DMA_SGBUF=y
 # CONFIG_SND_OPL4_LIB_SEQ is not set
 # CONFIG_SND_SBAWE_SEQ is not set
 # CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=m
 CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_DRIVERS is not set
 CONFIG_SND_PCI=y
@@ -2288,7 +2284,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set

projects/ION/linux/linux.i386.conf

@@ -183,7 +183,6 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -355,11 +354,6 @@ CONFIG_X86_CPUID=y
 # CONFIG_NOHIGHMEM is not set
 CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
-# CONFIG_VMSPLIT_3G is not set
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-# CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_HIGHMEM=y
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -408,7 +402,7 @@ CONFIG_HZ_300=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=300
 CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 # CONFIG_RELOCATABLE is not set
@@ -464,7 +458,6 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_STAT is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -2129,6 +2122,7 @@ CONFIG_SND_DMA_SGBUF=y
 # CONFIG_SND_OPL4_LIB_SEQ is not set
 # CONFIG_SND_SBAWE_SEQ is not set
 # CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=m
 # CONFIG_SND_DRIVERS is not set
 CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
@@ -2146,7 +2140,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set

projects/ION/linux/linux.x86_64.conf

@@ -184,7 +184,6 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -373,7 +372,7 @@ CONFIG_HZ_300=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=300
 CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 # CONFIG_RELOCATABLE is not set
@@ -427,7 +426,6 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_STAT is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -2067,6 +2065,7 @@ CONFIG_SND_DMA_SGBUF=y
 # CONFIG_SND_OPL4_LIB_SEQ is not set
 # CONFIG_SND_SBAWE_SEQ is not set
 # CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=m
 # CONFIG_SND_DRIVERS is not set
 CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
@@ -2084,7 +2083,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set

projects/Intel/linux/linux.i386.conf

@@ -183,7 +183,6 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -356,11 +355,6 @@ CONFIG_X86_CPUID=y
 # CONFIG_NOHIGHMEM is not set
 CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
-# CONFIG_VMSPLIT_3G is not set
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-# CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_HIGHMEM=y
 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
@@ -409,7 +403,7 @@ CONFIG_HZ_300=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=300
 CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 # CONFIG_RELOCATABLE is not set
@@ -466,7 +460,6 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_STAT is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -1135,8 +1128,17 @@ CONFIG_HOSTAP=m
 # CONFIG_HOSTAP_FIRMWARE is not set
 # CONFIG_HOSTAP_PLX is not set
 # CONFIG_HOSTAP_PCI is not set
-# CONFIG_IPW2100 is not set
+CONFIG_IPW2100=m
-# CONFIG_IPW2200 is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
 CONFIG_IWLAGN=m
 
 #
@@ -2179,6 +2181,7 @@ CONFIG_SND_DMA_SGBUF=y
 # CONFIG_SND_OPL4_LIB_SEQ is not set
 # CONFIG_SND_SBAWE_SEQ is not set
 # CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=m
 # CONFIG_SND_DRIVERS is not set
 CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
@@ -2196,7 +2199,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
@@ -2234,15 +2238,15 @@ CONFIG_SND_HDA_PATCH_LOADER=y
 CONFIG_SND_HDA_CODEC_REALTEK=y
 CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
 CONFIG_SND_HDA_CODEC_ANALOG=y
-# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
 CONFIG_SND_HDA_CODEC_VIA=y
 CONFIG_SND_HDA_CODEC_HDMI=y
-# CONFIG_SND_HDA_CODEC_CIRRUS is not set
+CONFIG_SND_HDA_CODEC_CIRRUS=y
 CONFIG_SND_HDA_CODEC_CONEXANT=y
-# CONFIG_SND_HDA_CODEC_CA0110 is not set
+CONFIG_SND_HDA_CODEC_CA0110=y
 CONFIG_SND_HDA_CODEC_CA0132=y
-# CONFIG_SND_HDA_CODEC_CMEDIA is not set
+CONFIG_SND_HDA_CODEC_CMEDIA=y
-# CONFIG_SND_HDA_CODEC_SI3054 is not set
+CONFIG_SND_HDA_CODEC_SI3054=y
 CONFIG_SND_HDA_GENERIC=y
 # CONFIG_SND_HDA_POWER_SAVE is not set
 # CONFIG_SND_HDSP is not set

projects/Intel/linux/linux.x86_64.conf

@@ -184,7 +184,6 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -375,7 +374,7 @@ CONFIG_HZ_300=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=300
 CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 # CONFIG_RELOCATABLE is not set
@@ -430,7 +429,6 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_STAT is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -1087,8 +1085,17 @@ CONFIG_HOSTAP=m
 # CONFIG_HOSTAP_FIRMWARE is not set
 # CONFIG_HOSTAP_PLX is not set
 # CONFIG_HOSTAP_PCI is not set
-# CONFIG_IPW2100 is not set
+CONFIG_IPW2100=m
-# CONFIG_IPW2200 is not set
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW2100_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
+# CONFIG_IPW2200_DEBUG is not set
+CONFIG_LIBIPW=m
+# CONFIG_LIBIPW_DEBUG is not set
 CONFIG_IWLAGN=m
 
 #
@@ -2122,6 +2129,7 @@ CONFIG_SND_DMA_SGBUF=y
 # CONFIG_SND_OPL4_LIB_SEQ is not set
 # CONFIG_SND_SBAWE_SEQ is not set
 # CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=m
 # CONFIG_SND_DRIVERS is not set
 CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
@@ -2139,7 +2147,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
@@ -2177,15 +2186,15 @@ CONFIG_SND_HDA_PATCH_LOADER=y
 CONFIG_SND_HDA_CODEC_REALTEK=y
 CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
 CONFIG_SND_HDA_CODEC_ANALOG=y
-# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
+CONFIG_SND_HDA_CODEC_SIGMATEL=y
 CONFIG_SND_HDA_CODEC_VIA=y
 CONFIG_SND_HDA_CODEC_HDMI=y
-# CONFIG_SND_HDA_CODEC_CIRRUS is not set
+CONFIG_SND_HDA_CODEC_CIRRUS=y
 CONFIG_SND_HDA_CODEC_CONEXANT=y
-# CONFIG_SND_HDA_CODEC_CA0110 is not set
+CONFIG_SND_HDA_CODEC_CA0110=y
 CONFIG_SND_HDA_CODEC_CA0132=y
-# CONFIG_SND_HDA_CODEC_CMEDIA is not set
+CONFIG_SND_HDA_CODEC_CMEDIA=y
-# CONFIG_SND_HDA_CODEC_SI3054 is not set
+CONFIG_SND_HDA_CODEC_SI3054=y
 CONFIG_SND_HDA_GENERIC=y
 # CONFIG_SND_HDA_POWER_SAVE is not set
 # CONFIG_SND_HDSP is not set

projects/Ultra/linux/linux.x86_64.conf

@@ -184,7 +184,6 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
-# CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -373,7 +372,7 @@ CONFIG_HZ_300=y
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=300
 CONFIG_SCHED_HRTICK=y
-# CONFIG_KEXEC is not set
+CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 # CONFIG_RELOCATABLE is not set
@@ -427,7 +426,6 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_STAT is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set