diff --git a/packages/initramfs/sysutils/busybox-initramfs/scripts/init b/packages/initramfs/sysutils/busybox-initramfs/scripts/init
index 0083c8d388..d3f874ceae 100755
--- a/packages/initramfs/sysutils/busybox-initramfs/scripts/init
+++ b/packages/initramfs/sysutils/busybox-initramfs/scripts/init
@@ -22,12 +22,12 @@
 #  http://www.gnu.org/copyleft/gpl.html
 ################################################################################
 
-# mount all needed special filesystems
+  # mount all needed special filesystems
   /bin/busybox mount -t devtmpfs devtmpfs /dev
   /bin/busybox mount -t proc proc /proc
   /bin/busybox mount -t sysfs sysfs /sys
 
-# set needed variables
+  # set needed variables
   MODULE_DIR=/lib/modules
 
   UPDATE_DIR=/storage/.update
@@ -49,19 +49,19 @@
   INSTALLED_MEMORY=`cat /proc/meminfo | grep 'MemTotal:' | awk '{print $2}'`
   SYSTEM_TORAM_LIMIT=1024000
 
-# load any configuration
+  # load any configuration
   if [ -f "/etc/initramfs.conf" ]; then
     . /etc/initramfs.conf
   fi
 
-# hide kernel log messages on console
+  # hide kernel log messages on console
   echo '1 4 1 7' > /proc/sys/kernel/printk
 
-# clear screen and hide cursor
+  # clear screen and hide cursor
   clear
   echo 0 > /sys/devices/virtual/graphics/fbcon/cursor_blink
 
-# parse command line arguments
+  # parse command line arguments
   for arg in $(cat /proc/cmdline); do
     case $arg in
       BOOT_IMAGE=*)
@@ -137,20 +137,20 @@
     echo "### Starting debugging shell... type  exit  to quit ###"
 
     # show cursor
-      echo 0 > /sys/devices/virtual/graphics/fbcon/cursor_blink
+    echo 0 > /sys/devices/virtual/graphics/fbcon/cursor_blink
 
     sh </dev/tty1 >/dev/tty1 2>&1
   }
 
   error() {
-  # Display fatal error message
-  # $1:action which caused error, $2:message
+    # Display fatal error message
+    # $1:action which caused error, $2:message
     echo "*** Error in $BOOT_STEP: $1: $2 ***"
     debug_shell
   }
 
   break_after() {
-  # Start debug shell after boot step $1
+    # Start debug shell after boot step $1
     case $BREAK in
       all|*$1*)
         debug_shell
@@ -163,7 +163,7 @@
   # $1:target, $2:mountpoint, $3:mount options, [$4:fs type]
 
   mount_common() {
-  # Common mount handler, handles block devices and filesystem images
+    # Common mount handler, handles block devices and filesystem images
     MOUNT_OPTIONS="-o $3"
     [ -n "$4" ] && MOUNT_OPTIONS="-t $4 $MOUNT_OPTIONS"
 
@@ -179,7 +179,7 @@
   }
 
   mount_cifs() {
-  # Mount CIFS (Samba) share
+    # Mount CIFS (Samba) share
     CIFS_SHARE="${1%%,*}"
     CIFS_OPTIONS="${1#*,}"
     [ "$CIFS_OPTIONS" = "$1" ] && CIFS_OPTIONS=
@@ -188,7 +188,7 @@
   }
 
   get_iscsistart_options() {
-  # Convert kernel commandline ISCSI= options to iscsistart options
+    # Convert kernel commandline ISCSI= options to iscsistart options
     IFS_SAVE="$IFS"
     IFS=,
 
@@ -230,7 +230,7 @@
   }
 
   mount_iscsi() {
-  # Mount iSCSI target
+    # Mount iSCSI target
     ISCSI_DEV="${1##*,}"
     ISCSI_OPTIONS="${1%,*}"
 
@@ -268,7 +268,7 @@
   }
 
   mount_nfs() {
-  # Mount NFS export
+    # Mount NFS export
     NFS_EXPORT="${1%%,*}"
     NFS_OPTIONS="${1#*,}"
 
@@ -278,8 +278,8 @@
   }
 
   mount_part() {
-  # Mount a local or network filesystem
-  # $1:[TYPE=]target, $2:mountpoint, $3:mount options, [$4:fs type]
+    # Mount a local or network filesystem
+    # $1:[TYPE=]target, $2:mountpoint, $3:mount options, [$4:fs type]
     progress "mount filesystem $1 ..."
 
     MOUNT_TARGET="${1#*=}"
@@ -313,13 +313,13 @@
   update() {
     if [ -f "$UPDATE_DIR/$2" -a -f "$3" ]; then
       echo "updating $1..."
-        mount -o remount,rw /flash
-        mv $UPDATE_DIR/$2 $3
-        # loopback file needs writable /flash all the time
-        if [ "${disk%%=*}" != "FILE" ]; then
-          mount -o remount,ro /flash
-        fi
-        sync
+      mount -o remount,rw /flash
+      mv $UPDATE_DIR/$2 $3
+      # loopback file needs writable /flash all the time
+      if [ "${disk%%=*}" != "FILE" ]; then
+        mount -o remount,ro /flash
+      fi
+      sync
     fi
   }
 
@@ -331,8 +331,8 @@
 
     if [ -f $SYSTEM_ROOT/usr/share/bootloader/update.sh ]; then
       echo "updating Bootloader..."
-        sh $SYSTEM_ROOT/usr/share/bootloader/update.sh
-        sync
+      sh $SYSTEM_ROOT/usr/share/bootloader/update.sh
+      sync
     fi
 
     umount /sysroot
@@ -375,8 +375,8 @@
       # load uvesafb module if needed
       if [ -f "$MODULE_DIR/uvesafb.ko" -a ! -e /dev/fb0 ]; then
         progress "Loading kernel module uvesafb.ko"
-          insmod "$MODULE_DIR/uvesafb.ko" || \
-            progress "... Failed to load kernel module uvesafb, skipping"
+        insmod "$MODULE_DIR/uvesafb.ko" || \
+          progress "... Failed to load kernel module uvesafb, skipping"
 
         # set framebuffer to a default resolution (1024x768-32)
         if [ ! "$SWITCH_FRAMEBUFFER" = "no" ]; then
@@ -402,7 +402,7 @@
     progress "Checking disks"
 
     if [ -x /bin/fsck_hfs ]; then
-    # deal with hfs partitions
+      # deal with hfs partitions
       hfsdiskprep
     fi
   }
@@ -473,7 +473,7 @@
         mkdir -p /storage/$OVERLAY_DIR
         umount /storage
 
-      # split $disk into $target,$options so we can append $OVERLAY_DIR
+        # split $disk into $target,$options so we can append $OVERLAY_DIR
         options="${disk#*,}"
         target="${disk%%,*}"
         if [ "$options" = "$disk" ]; then
@@ -491,9 +491,9 @@
     progress "Checking for updates"
 
     # check for ATV1 mach-o-kernel
-      if [ -f "/flash/com.apple.Boot.plist" -a -f "/flash/boot.efi" ]; then
-        UPDATE_KERNEL="MACH_KERNEL"
-      fi
+    if [ -f "/flash/com.apple.Boot.plist" -a -f "/flash/boot.efi" ]; then
+      UPDATE_KERNEL="MACH_KERNEL"
+    fi
 
     UPDATE_TAR=`ls -1 "$UPDATE_DIR"/*.tar 2>/dev/null | head -n 1`
     if [ -f "$UPDATE_DIR/$UPDATE_KERNEL" -a -f "$UPDATE_DIR/$UPDATE_SYSTEM" -o -f "$UPDATE_TAR" ] ; then
@@ -527,18 +527,20 @@
       fi
 
       # check md5 sums if .nocheck doesn't exist
-      if [ "$MD5_NOCHECK" -eq "0" -a -f "$UPDATE_DIR/${UPDATE_KERNEL}.md5" -a -f "$UPDATE_DIR/${UPDATE_SYSTEM}.md5" ] ; then
-        sed  -i 's#target#/storage/.update#g' "$UPDATE_DIR/${UPDATE_KERNEL}.md5"
-        sed  -i 's#target#/storage/.update#g' "$UPDATE_DIR/${UPDATE_SYSTEM}.md5"
+      if [ "$MD5_NOCHECK" -eq "0" ] ; then
+        if [ -f "$UPDATE_DIR/${UPDATE_KERNEL}.md5" -a -f "$UPDATE_DIR/${UPDATE_SYSTEM}.md5" ] ; then
+          sed  -i 's#target#/storage/.update#g' "$UPDATE_DIR/${UPDATE_KERNEL}.md5"
+          sed  -i 's#target#/storage/.update#g' "$UPDATE_DIR/${UPDATE_SYSTEM}.md5"
 
-        echo "Checking ${UPDATE_KERNEL}.md5..."
-        md5sum -c "$UPDATE_DIR/${UPDATE_KERNEL}.md5" || MD5_FAILED="1"
+          echo "Checking ${UPDATE_KERNEL}.md5..."
+          md5sum -c "$UPDATE_DIR/${UPDATE_KERNEL}.md5" || MD5_FAILED="1"
 
-        echo "Checking ${UPDATE_SYSTEM}.md5..."
-        md5sum -c "$UPDATE_DIR/${UPDATE_SYSTEM}.md5" || MD5_FAILED="1"
-      else
-        echo "missing ${UPDATE_KERNEL}.md5 or ${UPDATE_SYSTEM}.md5..."
-        MD5_FAILED="1"
+          echo "Checking ${UPDATE_SYSTEM}.md5..."
+          md5sum -c "$UPDATE_DIR/${UPDATE_SYSTEM}.md5" || MD5_FAILED="1"
+        else
+          echo "missing ${UPDATE_KERNEL}.md5 or ${UPDATE_SYSTEM}.md5..."
+          MD5_FAILED="1"
+        fi
       fi
 
       # get sizes
@@ -615,7 +617,7 @@
     error "check arguments" "boot argument can't be FILE type..."
   fi
 
-# main boot sequence
+  # main boot sequence
   for BOOT_STEP in \
       load_modules \
       check_disks \
@@ -630,20 +632,20 @@
 
   BOOT_STEP=final
 
-# move some special filesystems
+  # move some special filesystems
   /bin/busybox mount --move /dev /sysroot/dev
   /bin/busybox mount --move /proc /sysroot/proc
   /bin/busybox mount --move /sys /sysroot/sys
 
-# tell OE settings addon to disable updates
+  # tell OE settings addon to disable updates
   if [ "$UPDATE_DISABLED" = "yes" ] ; then
     echo "" > /sysroot/dev/.update_disabled
   fi
-# swap can not be used over nfs.(see scripts/mount-swap)
+  # swap can not be used over nfs.(see scripts/mount-swap)
   if [ "$STORAGE_NETBOOT" = "yes" ] ; then
     echo "" > /sysroot/dev/.storage_netboot
   fi
-# switch to new sysroot and start real init
+  # switch to new sysroot and start real init
   exec /bin/busybox switch_root /sysroot /lib/systemd/systemd $INIT_ARGS
 
   error "switch_root" "Error in initramfs. Could not switch to new root"