Merge pull request #13 from lrusak/virtual-is-back

Thanks :)

config/graphic

@@ -12,7 +12,7 @@ fi
 
 get_graphicdrivers() {
   if [ "$GRAPHIC_DRIVERS" = "all" ]; then
-    GRAPHIC_DRIVERS="i915 i965 r200 r300 r600 nvidia"
+    GRAPHIC_DRIVERS="i915 i965 r200 r300 r600 nvidia vmware virtualbox"
   fi
 
   for drv in $GRAPHIC_DRIVERS; do
@@ -70,5 +70,17 @@ get_graphicdrivers() {
       VDPAU_SUPPORT="yes"
     fi
 
+    if [ "$drv" = "virtualbox" ]; then
+      DRI_DRIVERS="$DRI_DRIVERS,swrast"
+      XORG_DRIVERS="$XORG_DRIVERS virtualbox"
+    fi
+
+    if [ "$drv" = "vmware" ]; then
+      DRI_DRIVERS="$DRI_DRIVERS,swrast"
+      GALLIUM_DRIVERS="$GALLIUM_DRIVERS,svga"
+      XORG_DRIVERS="$XORG_DRIVERS vmware"
+#      LLVM_SUPPORT="yes"
+    fi
+
   done
 }

packages/devel/glib/package.mk

@@ -24,6 +24,7 @@ PKG_LICENSE="LGPL"
 PKG_SITE="http://www.gtk.org/"
 PKG_URL="http://ftp.gnome.org/pub/gnome/sources/glib/2.46/$PKG_NAME-$PKG_VERSION.tar.xz"
 PKG_DEPENDS_TARGET="toolchain zlib libffi pcre Python:host"
+PKG_DEPENDS_HOST="libffi:host"
 PKG_PRIORITY="optional"
 PKG_SECTION="devel"
 PKG_SHORTDESC="glib: C support library"

packages/graphics/libdrm/package.mk

@@ -46,6 +46,10 @@ for drv in $GRAPHIC_DRIVERS; do
     DRM_CONFIG=`echo $DRM_CONFIG | sed -e 's/disable-libkms/enable-libkms/'` && \
     DRM_CONFIG=`echo $DRM_CONFIG | sed -e 's/disable-radeon/enable-radeon/'` && \
     DRM_CONFIG=`echo $DRM_CONFIG | sed -e 's/disable-amdgpu/enable-amdgpu/'`
+
+  [ "$drv" = "vmware" ] && \
+    DRM_CONFIG=`echo $DRM_CONFIG | sed -e 's/disable-libkms/enable-libkms/'` && \
+    DRM_CONFIG=`echo $DRM_CONFIG | sed -e 's/disable-vmwgfx/enable-vmwgfx/'`
 done
 
 PKG_CONFIGURE_OPTS_TARGET="--disable-udev \

packages/graphics/mesa/package.mk

@@ -50,6 +50,11 @@ else
   MESA_VDPAU="--disable-vdpau"
 fi
 
+XA_CONFIG="--disable-xa"
+for drv in $GRAPHIC_DRIVERS; do
+  [ "$drv" = "vmware" ] && XA_CONFIG="--enable-xa"
+done
+
 PKG_CONFIGURE_OPTS_TARGET="CC_FOR_BUILD=$HOST_CC \
                            CXX_FOR_BUILD=$HOST_CXX \
                            CFLAGS_FOR_BUILD= \
@@ -72,7 +77,7 @@ PKG_CONFIGURE_OPTS_TARGET="CC_FOR_BUILD=$HOST_CC \
                            --disable-osmesa \
                            --disable-gallium-osmesa \
                            --enable-egl --with-egl-platforms=x11,drm \
-                           --disable-xa \
+                           $XA_CONFIG \
                            --enable-gbm \
                            --disable-nine \
                            --disable-xvmc \

packages/linux-drivers/vboxguest/package.mk

@@ -0,0 +1,47 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+PKG_NAME="vboxguest"
+PKG_VERSION="5.0.12"
+PKG_REV="1"
+PKG_ARCH="x86_64"
+PKG_LICENSE="GPL"
+PKG_SITE="http://www.virtualbox.org"
+PKG_URL="${DISTRO_SRC}/${PKG_NAME}-${PKG_VERSION}.tar.xz"
+PKG_DEPENDS_TARGET="toolchain linux"
+PKG_NEED_UNPACK="$LINUX_DEPENDS"
+PKG_PRIORITY="optional"
+PKG_SECTION="driver"
+PKG_SHORTDESC="vboxguest"
+PKG_LONGDESC="vboxguest"
+
+PKG_IS_ADDON="no"
+PKG_AUTORECONF="no"
+
+pre_make_target() {
+  unset LDFLAGS
+}
+
+make_target() {
+  make KERN_DIR=$(kernel_path)
+}
+
+makeinstall_target() {
+  mkdir -p $INSTALL/lib/modules/$(get_module_dir)/$PKG_NAME
+    cp *.ko $INSTALL/lib/modules/$(get_module_dir)/$PKG_NAME
+}

packages/network/libdnet/package.mk

@@ -0,0 +1,48 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2016 Stephan Raue (stephan@openelec.tv)
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+PKG_NAME="libdnet"
+PKG_VERSION="1.12"
+PKG_REV="1"
+PKG_ARCH="any"
+PKG_LICENSE="BSD"
+PKG_SITE="http://code.google.com/p/libdnet/"
+PKG_URL="http://libdnet.googlecode.com/files/$PKG_NAME-$PKG_VERSION.tgz"
+PKG_DEPENDS_TARGET="toolchain"
+PKG_PRIORITY="optional"
+PKG_SECTION="network"
+PKG_SHORTDESC="A simplified, portable interface to several low-level networking routines"
+PKG_LONGDESC="A simplified, portable interface to several low-level networking routines"
+
+PKG_IS_ADDON="no"
+PKG_AUTORECONF="no"
+
+PKG_CONFIGURE_OPTS_TARGET="ac_cv_func_strlcat=no \
+                           ac_cv_func_strlcpy=no \
+                           --enable-static \
+                           --disable-shared \
+                           --without-python"
+
+pre_configure_target() {
+  sed "s|@prefix@|$SYSROOT_PREFIX/usr|g" -i $ROOT/$PKG_BUILD/dnet-config.in
+}
+
+post_makeinstall_target() {
+  mkdir -p $ROOT/$TOOLCHAIN/bin
+    cp dnet-config $ROOT/$TOOLCHAIN/bin/
+}

packages/sysutils/open-vm-tools/modules-load.d/open-vm-tools.conf

@@ -0,0 +1,2 @@
+# load vmxnet kernel module
+vmxnet

packages/sysutils/open-vm-tools/package.mk

@@ -0,0 +1,74 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
+#      Copyright (C) 2011 Anthony Nash (nash.ant@gmail.com)
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+PKG_NAME="open-vm-tools"
+PKG_VERSION="stable-10.0.7"
+PKG_REV="1"
+PKG_ARCH="x86_64"
+PKG_LICENSE="GPL"
+PKG_SITE="http://open-vm-tools.sourceforge.net"
+PKG_URL="https://github.com/vmware/open-vm-tools/archive/${PKG_VERSION}.tar.gz"
+PKG_DEPENDS_TARGET="toolchain glib:host glib libdnet"
+PKG_PRIORITY="optional"
+PKG_SECTION="virtualization"
+PKG_SHORTDESC="open-vm-tools: open source implementation of VMware Tools"
+PKG_LONGDESC="open-vm-tools: open source implementation of VMware Tools"
+
+PKG_IS_ADDON="no"
+PKG_AUTORECONF="yes"
+
+OPENVMTOOLS_KERNEL_VER=$(basename $(ls -d $ROOT/$BUILD/linux-[0-9]*)| sed 's|linux-||g')
+
+PKG_CONFIGURE_OPTS_TARGET="--disable-docs \
+                           --disable-tests \
+                           --disable-deploypkg \
+                           --without-pam \
+                           --without-gtk2 \
+                           --without-gtkmm \
+                           --without-ssl \
+                           --without-x \
+                           --without-xerces \
+                           --without-icu \
+                           --without-procps \
+                           --without-kernel-modules \
+                           --with-sysroot=$SYSROOT_PREFIX"
+
+unpack() {
+  # ugly
+  $SCRIPTS/extract $PKG_NAME "$PKG_VERSION.tar.gz" $BUILD
+  mv $PKG_BUILD/$PKG_NAME/* $PKG_BUILD/
+  rm -r $PKG_BUILD/$PKG_NAME
+}
+
+pre_configure_target() {
+   export LIBS="-ldnet"
+}
+
+makeinstall_target() {
+  mkdir -p $INSTALL/usr/lib
+    cp -PR libvmtools/.libs/libvmtools.so* $INSTALL/usr/lib
+
+  mkdir -p $INSTALL/usr/bin
+    cp -PR services/vmtoolsd/.libs/vmtoolsd $INSTALL/usr/bin
+    cp -PR checkvm/.libs/vmware-checkvm $INSTALL/usr/bin
+}
+
+post_install() {
+  enable_service open-vm-tools.service
+}

packages/sysutils/open-vm-tools/system.d/open-vm-tools.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=OpenVMTools Server
+After=xorg-server.service
+
+ConditionPathExists=/usr/bin/vmware-checkvm
+ConditionPathExists=/usr/bin/vmtoolsd
+
+[Service]
+Type=forking
+PIDFile=/var/run/vmtoolsd.pid
+ExecStart=-/bin/sh -c '/usr/bin/vmware-checkvm && /usr/bin/vmtoolsd --background /var/run/vmtoolsd.pid'
+ExecReload=/bin/kill -HUP $MAINPID
+
+[Install]
+WantedBy=graphical.target

packages/tools/syslinux/unsupported/create_virtualimage

@@ -0,0 +1,332 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+# usage:   sudo ./create_virtualmachine <path> <size(MB)> [<type>] [system partition size(MB)]
+# example: sudo ./create_virtualmachine /home/test/VM 512 [vdi] [128]
+
+if [ "$(id -u)" != "0" ]; then
+  echo "##############################################################"
+  echo "# please execute with 'sudo' or -DANGEROUS!!!- as root       #"
+  echo "# example:                                                   #"
+  echo "# sudo ./create_virtualmachine <path> <size(MB)> [<type>]    #"
+  echo "##############################################################"
+  exit 1
+fi
+
+if [ -z "$1" -o -z "$2" ]; then
+  echo "##############################################################"
+  echo "# please execute as follows                                  #"
+  echo "# example:                                                   #"
+  echo "# sudo ./create_virtualmachine <path> <size(MB)> [<type>]    #"
+  echo "##############################################################"
+  exit 1
+fi
+
+if [ ! -d "$1" ]; then
+  echo "##############################################################"
+  echo "# please create target directory                             #"
+  echo "# example:                                                   #"
+  echo "# mkdir <path>                                               #"
+  echo "##############################################################"
+  exit 1
+fi
+
+if [ "$2" -lt "200" -o "$2" -gt "2048" ]; then
+  echo "##############################################################"
+  echo "# use a value between 200MB and 2048MB (2GB)                 #"
+  echo "# example:                                                   #"
+  echo "# sudo ./create_virtualmachine /home/test/VM 512             #"
+  echo "##############################################################"
+  exit 1
+fi
+
+if [ ! -z "$3" -a "$3" != "vdi" -a "$3" != "vmdk" ]; then
+  echo "##############################################################"
+  echo "# only vdi or vmdk types are supported                       #"
+  echo "# example:                                                   #"
+  echo "# sudo ./create_virtualmachine /home/test/VM 512 [vdi]       #"
+  echo "##############################################################"
+  exit 1
+elif [ "$3" = "vdi" ]; then
+  TYPE="vdi"
+elif [ -z "$3" -o "$3" = "vmdk" ]; then
+  TYPE="vmdk"
+fi
+
+if [ -z "$4" ]; then
+  SYSTEM_SIZE=192
+else
+  if [ "$4" -lt "128" -o "$4" -gt "1024" -o "$4" -gt "$2" ]; then
+    echo "##############################################################"
+    echo "# use a value between 128MB and 1024MB                       #"
+    echo "# example:                                                   #"
+    echo "# sudo ./create_virtualmachine /home/test/VM 512 [vdi] [256] #"
+    echo "##############################################################"
+    exit 1
+  else
+    SYSTEM_SIZE=$4
+  fi
+fi
+
+DISK="$1/OpenELEC.img"
+IMAGE="$1/OpenELEC.$TYPE"
+LOOP=$(losetup -f)
+DISK_SIZE=$2
+STORAGE_SIZE=$(( $DISK_SIZE - $SYSTEM_SIZE ))
+
+echo ""
+echo "      folder: $1"
+echo "        loop: $LOOP"
+echo "        disk: $DISK"
+echo "       image: $IMAGE"
+echo "        type: $TYPE"
+echo "   disk size: $DISK_SIZE MB"
+echo " system size: $SYSTEM_SIZE MB"
+echo "storage size: $STORAGE_SIZE MB"
+
+# check for some required tools
+
+  # this is needed to create a bootloader
+  which syslinux > /dev/null
+  if [ "$?" = "1" ]; then
+    echo "#########################################################"
+    echo "#                                                       #"
+    echo "# OpenELEC.tv missing tool - Installation will quit     #"
+    echo "#                                                       #"
+    echo "#      We can't find the required tool \"syslinux\"     #"
+    echo "#      on your system.                                  #"
+    echo "#      Please install it via your package manager.      #"
+    echo "#                                                       #"
+    echo "#########################################################"
+    exit 1
+  fi
+
+  # this is needed to create a bootloader
+  which extlinux > /dev/null
+  if [ "$?" = "1" ]; then
+    echo "#########################################################"
+    echo "#                                                       #"
+    echo "# OpenELEC.tv missing tool - Installation will quit     #"
+    echo "#                                                       #"
+    echo "#      We can't find the required tool \"extlinux\"     #"
+    echo "#      on your system.                                  #"
+    echo "#      Please install it via your package manager.      #"
+    echo "#                                                       #"
+    echo "#########################################################"
+    exit 1
+  fi
+
+  # this is needed by syslinux
+  which mcopy > /dev/null
+    if [ "$?" = "1" ]; then
+    echo "#########################################################"
+    echo "#                                                       #"
+    echo "# OpenELEC.tv missing tool - Installation will quit     #"
+    echo "#                                                       #"
+    echo "#      We can't find the required tool \"mcopy\"        #"
+    echo "#      on your system.                                  #"
+    echo "#      Please install it via your package manager.      #"
+    echo "#      NOTE: Some distributions call this package       #"
+    echo "#      \"mtools\".                                      #"
+    echo "#                                                       #"
+    echo "#########################################################"
+    exit 1
+  fi
+
+  # this is needed to partion the drive
+  which parted > /dev/null
+  if [ "$?" = "1" ]; then
+    echo "#########################################################"
+    echo "#                                                       #"
+    echo "# OpenELEC.tv missing tool - Installation will quit     #"
+    echo "#                                                       #"
+    echo "#      We can't find the required tool \"parted\"       #"
+    echo "#      on your system.                                  #"
+    echo "#      Please install it via your package manager.      #"
+    echo "#                                                       #"
+    echo "#########################################################"
+    exit 1
+  fi
+
+  # this is needed fo convert harddisk image to vmdk or vdi format
+  which qemu-img > /dev/null
+  if [ "$?" = "1" ]; then
+    echo "#########################################################"
+    echo "#                                                       #"
+    echo "# OpenELEC.tv missing tool - Installation will quit     #"
+    echo "#                                                       #"
+    echo "#      We can't find the required tool \"qemu-img\"     #"
+    echo "#      on your system.                                  #"
+    echo "#      Please install it via your package manager.      #"
+    echo "#                                                       #"
+    echo "#########################################################"
+    exit 1
+  fi
+
+# ensure loopX not in use
+  echo ""
+  echo "next two errors can be ignored..."
+  sync
+  umount "$LOOP"
+  losetup -d "$LOOP"
+
+# create an image
+  echo ""
+  echo "creating new empty harddisk image: $DISK..."
+  dd if=/dev/zero of="$DISK" bs=1M count="$DISK_SIZE"
+
+# write a disklabel
+  echo ""
+  echo "creating new partition table: $DISK..."
+  sync
+  losetup "$LOOP" "$DISK"
+  parted -s "$LOOP" mklabel msdos
+
+# create partition1
+  echo ""
+  echo "creating partition1 on $DISK..."
+  SYSTEM_PART_END=$(( $SYSTEM_SIZE * 1024 * 1024 / 512 + 64 ))
+  parted -s "$LOOP" -a min unit s mkpart primary ext4 64 $SYSTEM_PART_END
+
+# create partition2
+  echo ""
+  echo "creating partition2 on $DISK..."
+  STORAGE_PART_START=$(( $SYSTEM_PART_END + 1 ))
+  parted -s "$LOOP" -a min unit s mkpart primary ext4 $STORAGE_PART_START 100%
+
+# make partition1 active (bootable)
+  echo ""
+  echo "marking partition1 active..."
+  parted -s "$LOOP" set 1 boot on
+
+# write mbr
+  echo ""
+  echo "writing mbr..."
+  if [ -f /usr/lib/syslinux/mbr.bin ]; then
+    MBR="/usr/lib/syslinux/mbr.bin"       # example: debian, ubuntu
+  elif [ -f /usr/share/syslinux/mbr.bin ]; then
+    MBR="/usr/share/syslinux/mbr.bin"     # example: fedora
+  elif [ -f /usr/lib/syslinux/bios/mbr.bin ]; then
+    MBR="/usr/lib/syslinux/bios/mbr.bin"
+  else
+    echo "Can't find syslinux's mbr.bin on Host OS"
+    exit 1
+  fi
+
+  if [ -n "$MBR" ]; then
+    cat "$MBR" > "$LOOP"
+  fi
+
+# sync disk
+  echo ""
+  echo "syncing disk..."
+  sync
+
+# create filesystem on partition1
+  echo ""
+  sync
+  losetup -d "$LOOP"
+  echo "creating filesystem on partition1..."
+  OFFSET=$(( 64 * 512 ))
+  SIZELIMIT=$(( $SYSTEM_SIZE * 1024 * 1024 ))
+  losetup -o $OFFSET --sizelimit $SIZELIMIT "$LOOP" "$DISK"
+  mke2fs -q -t ext4 -m 0 "$LOOP"
+  tune2fs -U random -L "System" "$LOOP"
+  sync
+  e2fsck -n "$LOOP"
+
+# mount partition
+  echo ""
+  echo "mounting partition1 on /tmp/vmware_install..."
+  mkdir -p /tmp/vmware_install
+  mount "$LOOP" /tmp/vmware_install
+
+# create bootloader configuration
+  echo ""
+  echo "creating bootloader configuration..."
+
+  cat >/tmp/vmware_install/syslinux.cfg << EOF
+DEFAULT linux
+PROMPT 0
+
+LABEL linux
+  KERNEL /KERNEL
+  APPEND boot=LABEL=System disk=LABEL=Storage quiet ssh
+
+EOF
+
+# install extlinux
+  echo ""
+  echo "installing extlinux to partition1..."
+  extlinux --heads=4 --sector=32 -i /tmp/vmware_install
+
+# copy files
+  echo ""
+  echo "copying files to partition1..."
+  cp target/KERNEL /tmp/vmware_install
+  cp target/SYSTEM /tmp/vmware_install
+
+# sync disk
+  echo ""
+  echo "syncing disk..."
+  sync
+
+# unmount partition1
+  echo ""
+  echo "unmounting partition1..."
+  umount "$LOOP"
+  sync
+
+# create filesystem on partition2
+  echo ""
+  sync
+  losetup -d "$LOOP"
+  echo "creating filesystem on partition2..."
+  OFFSET=$(( $STORAGE_PART_START * 512 ))
+  losetup -o $OFFSET "$LOOP" "$DISK"
+  mke2fs -q -t ext4 -m 0 "$LOOP"
+  tune2fs -U random -L "Storage" "$LOOP"
+  sync
+  e2fsck -n "$LOOP"
+
+# detach loopX
+  sync
+  losetup -d "$LOOP"
+
+# cleaning
+  echo ""
+  echo "cleaning tempdir..."
+  [ -f /tmp/vmware_install/ldlinux.sys ] && chattr -i /tmp/vmware_install/ldlinux.sys
+  rm -rf /tmp/vmware_install
+
+# convert image to vmdk or vdi
+  echo ""
+  echo "converting $DISK to $TYPE format..."
+  qemu-img convert -O $TYPE "$DISK" "$IMAGE"
+  rm -f "$DISK"
+
+# sync disk
+  echo ""
+  echo "syncing disk..."
+  sync
+
+  echo ""
+  echo "installation finished..."
+  echo ""

packages/x11/driver/xf86-video-virtualbox/config/xorg-vboxvideo.conf

@@ -0,0 +1,31 @@
+Section "Device"
+   Identifier   "Configured Video Device"
+   Driver      "vboxvideo"
+EndSection
+
+Section "Monitor"
+   Identifier   "Configured Monitor"
+EndSection
+
+Section "Screen"
+   Identifier   "Default Screen"
+   Monitor      "Configured Monitor"
+   Device      "Configured Video Device"
+   DefaultDepth    24
+   SubSection      "Display"
+      Depth           24
+   EndSubSection
+EndSection
+
+Section "InputDevice"
+        Identifier  "vboxmouse"
+        Driver          "vboxmouse"
+        Option          "CorePointer"
+        Option          "Device"        "/dev/input/mice"
+EndSection
+
+Section "ServerLayout"
+        Identifier      "Default Layout"
+        Screen          "Default Screen"        0 0
+        InputDevice     "vboxmouse"
+EndSection

packages/x11/driver/xf86-video-virtualbox/modules-load.d/vboxvideo.conf

@@ -0,0 +1,2 @@
+# load vboxvideo kernel module
+vboxvideo

packages/x11/driver/xf86-video-virtualbox/package.mk

@@ -0,0 +1,51 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+PKG_NAME="xf86-video-virtualbox"
+PKG_VERSION="5.0.12"
+PKG_REV="1"
+PKG_ARCH="x86_64"
+PKG_LICENSE="OSS"
+PKG_SITE="http://www.virtualbox.org"
+PKG_URL="${DISTRO_SRC}/${PKG_NAME}-${PKG_VERSION}.tar.xz"
+PKG_DEPENDS_TARGET="toolchain libXcomposite libXdamage libXfixes libXext libX11 libxcb libXau"
+PKG_PRIORITY="optional"
+PKG_SECTION="x11/driver"
+PKG_SHORTDESC="xf86-video-virtualbox: The Xorg driver for virtualbox video"
+PKG_LONGDESC="xf86-video-virtualbox: The Xorg driver for virtualbox video"
+
+PKG_IS_ADDON="no"
+PKG_AUTORECONF="no"
+
+make_target() {
+  : # nothing todo
+}
+
+makeinstall_target() {
+  mkdir -p $INSTALL/$XORG_PATH_MODULES/drivers
+    cp -P lib/VBoxGuestAdditions/vboxvideo_drv_118.so $INSTALL/$XORG_PATH_MODULES/drivers/vboxvideo_drv.so
+
+  mkdir -p $INSTALL/usr/lib/dri
+    cp -P lib/VBoxOGL.so $INSTALL/usr/lib/dri/vboxvideo_dri.so
+
+  mkdir -p $INSTALL/usr/lib
+    cp -aP lib/* $INSTALL/usr/lib
+
+  mkdir -p $INSTALL/etc/X11
+    cp $PKG_DIR/config/*.conf $INSTALL/etc/X11
+}

packages/x11/driver/xf86-video-vmware/modules-load.d/vmwgfx.conf

@@ -0,0 +1,3 @@
+# load vmwgfx kernel module
+vmwgfx
+

packages/x11/driver/xf86-video-vmware/package.mk

@@ -0,0 +1,36 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+PKG_NAME="xf86-video-vmware"
+PKG_VERSION="13.1.0"
+PKG_REV="1"
+PKG_ARCH="x86_64"
+PKG_LICENSE="OSS"
+PKG_SITE="http://www.vmware.com"
+PKG_URL="http://xorg.freedesktop.org/releases/individual/driver/${PKG_NAME}-${PKG_VERSION}.tar.bz2"
+PKG_DEPENDS_TARGET="toolchain mesa glu libX11 xorg-server open-vm-tools"
+PKG_PRIORITY="optional"
+PKG_SECTION="x11/driver"
+PKG_SHORTDESC="xf86-video-vmware: The Xorg driver for vmware video"
+PKG_LONGDESC="xf86-video-vmware: The Xorg driver for vmware video"
+
+PKG_IS_ADDON="no"
+PKG_AUTORECONF="yes"
+
+PKG_CONFIGURE_OPTS_TARGET="--enable-vmwarectrl-client \
+                           --with-xorg-module-dir=$XORG_PATH_MODULES"

packages/x11/xserver/xorg-server/udev.d/97-xorg.rules

@@ -20,6 +20,13 @@ ACTION!="add|change", GOTO="end_video"
 
 # xorg_start only does something for subsystem "pci" and "video" class.
 SUBSYSTEM=="pci", ATTR{class}=="0x030000", GOTO="subsystem_pci"
+SUBSYSTEM=="drivers", GOTO="subsystem_drivers"
+GOTO="end_video"
+
+# check for drivers dont use the pci substem
+LABEL="subsystem_drivers"
+KERNEL=="vboxvideo", ENV{xorg_driver}="vboxvideo", TAG+="systemd", ENV{SYSTEMD_WANTS}+="xorg-configure@vboxvideo.service"
+KERNEL=="vmwgfx", ENV{xorg_driver}="vmware", TAG+="systemd", ENV{SYSTEMD_WANTS}+="xorg-configure@vmware.service"
 GOTO="end_video"
 
 # check for drivers using the pci substem

projects/Virtual/README.unsupported

@@ -0,0 +1,9 @@
+This is a testing project ONLY for developers.
+
+You are free to use it but there will be no support at all.
+
+To be absolutely clear there will be
+
+=== NO SUPPORT ===
+
+on this project.

projects/Virtual/options

@@ -0,0 +1,102 @@
+################################################################################
+# setup system defaults
+################################################################################
+
+  # The TARGET_CPU variable controls which processor should be targeted for
+  # generated code.
+    case $TARGET_ARCH in
+      x86_64)
+        # (AMD CPUs)    k8 k8-sse3 opteron opteron-sse3 athlon64 athlon64-sse3
+        #               athlon-fx amdfam10 barcelona
+        # (Intel CPUs)  atom core2 nocona
+        #
+        TARGET_CPU="x86-64"
+        ;;
+    esac
+
+  # Bootloader to use (syslinux / u-boot / atv-bootloader)
+    BOOTLOADER="syslinux"
+
+  # u-boot version to use (default)
+    UBOOT_VERSION="default"
+
+  # Configuration for u-boot
+    UBOOT_CONFIG=""
+
+  # Target Configfile for u-boot
+    UBOOT_CONFIGFILE=""
+
+  # Kernel target
+    KERNEL_TARGET="bzImage"
+
+  # Kernel extra targets to build
+    KERNEL_UBOOT_EXTRA_TARGET=""
+
+  # Additional kernel make parameters (for example to specify the u-boot loadaddress)
+    KERNEL_MAKE_EXTRACMD=""
+
+  # Kernel to use. values can be:
+  # default:  default mainline kernel
+    LINUX="default"
+
+
+################################################################################
+# setup build defaults
+################################################################################
+
+  # Build optimizations (size/normal)
+    OPTIMIZATIONS="size"
+
+  # Project CFLAGS
+    PROJECT_CFLAGS="-mmmx -msse -msse2 -mfpmath=sse"
+
+  # LTO (Link Time Optimization) support
+    LTO_SUPPORT="yes"
+
+  # GOLD (Google Linker) support
+    GOLD_SUPPORT="yes"
+
+  # SquashFS compression method (gzip / lzo / xz)
+    SQUASHFS_COMPRESSION="gzip"
+
+
+################################################################################
+# setup project defaults
+################################################################################
+
+  # build and install ALSA Audio support (yes / no)
+    ALSA_SUPPORT="yes"
+
+  # OpenGL(X) implementation to use (no / mesa)
+    OPENGL="mesa"
+
+  # OpenGL-ES implementation to use (no / bcm2835-driver / gpu-viv-bin-mx6q)
+    OPENGLES="no"
+
+  # include uvesafb support (yes / no)
+    UVESAFB_SUPPORT="yes"
+
+  # Displayserver to use (x11 / no)
+    DISPLAYSERVER="x11"
+
+  # KODI Player implementation to use (default / bcm2835-driver / libfslvpuwrap)
+    KODIPLAYER_DRIVER="default"
+
+  # Modules to install in initramfs for early boot
+    INITRAMFS_MODULES=""
+
+  # additional Firmware to use (dvb-firmware, misc-firmware, wlan-firmware)
+  # Space separated list is supported,
+  # e.g. FIRMWARE="dvb-firmware misc-firmware wlan-firmware"
+    FIRMWARE="misc-firmware wlan-firmware dvb-firmware iwlwifi-firmware"
+
+  # additional drivers to install:
+  # for a list of additinoal drivers see packages/linux-drivers
+  # Space separated list is supported,
+  # e.g. ADDITIONAL_DRIVERS="DRIVER1 DRIVER2"
+    ADDITIONAL_DRIVERS="$ADDITIONAL_DRIVERS bcm_sta vboxguest"
+
+  # Xorg Graphic drivers to use (all / i915,i965,r200,r300,r600,nvidia,nouveau,vmware,virtualbox)
+  # Space separated list is supported,
+  # e.g. GRAPHIC_DRIVERS="i915 i965 r300 r600 radeonsi nvidia nouveau"
+    GRAPHIC_DRIVERS="vmware virtualbox"