diff --git a/projects/Odroid_C2/filesystem/etc/amremote/remote.conf b/projects/Odroid_C2/filesystem/etc/amremote/remote.conf
new file mode 100644
index 0000000000..f1b937180b
--- /dev/null
+++ b/projects/Odroid_C2/filesystem/etc/amremote/remote.conf
@@ -0,0 +1,57 @@
+#*********************************************************************************************************
+#this file is configuration for each factory remote device
+# 	work_mode	  0 :software mode  1 :hardware mode
+#	repeat_enable	  0 :disable repeat 1 :enable repeat
+#
+#	factory_code      each device has it's unique factory code.
+#			  pattern:custom_code(16bit)+index_code(16bit)
+#			  examble: 0xff000001 = 0xff00(custom cod)  0001 (index)
+#
+#	release_delay	  unit:ms.release will report from kernel to user layer after this period of time
+#			  from press or repeat triggered.
+#
+#	debug_enable      0 :debug disable  1 :debug disable
+#
+# SW MODE:
+#	bit_count	  how many bits in each frame
+#	tw_leader_act	  time window for leader active
+#	tw_bit0		  time window for bit0 time.
+#	tw_bit1		  time window for bit1 time
+#	tw_repeat_leader  time window for repeat leader
+# REG
+#	reg_base_gen	  set value for PREG_IR_DEC_BASE_GEN
+#	reg_control	  set value for PREG_IR_DEC_CONTROL
+#	reg_leader_act	  set value for PREG_IR_DEC_LEADER_ACTIVE
+#	reg_leader_idle	  set value for PREG_IR_DEC_LEADER_IDLE
+#	reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
+#	reg_bit0_time	  set value for PREG_IR_DEC_BIT0_TIME
+#*************************************************************************************************************
+#amlogic NEC remote
+factory_code	= 0x4db20001
+work_mode  	= 0
+repeat_enable	= 1
+repeat_delay	= 40
+repeat_peroid	= 39
+release_delay	= 121
+debug_enable 	= 1
+
+up_key_scancode         = 0xca
+down_key_scancode       = 0xd2
+left_key_scancode       = 0x99
+right_key_scancode      = 0xc1
+ok_key_scancode         = 0xce
+
+key_begin
+    0xdc 116 ; KEY_POWER
+    0x88 113 ; KEY_MUTE
+    0x82 102 ; KEY_HOME
+    0xca 103 ; KEY_UP
+    0xd2 108 ; KEY_DOWN
+    0x99 105 ; KEY_LEFT
+    0xc1 106 ; KEY_RIGHT
+    0xce 28  ; KEY_ENTER
+    0x9a 1   ; KEY_ESC
+    0xc5 46  ; KEY_C
+    0x80 115 ; KEY_VOLUMEUP
+    0x81 114 ; KEY_VOLUMEDOWN
+key_end
diff --git a/projects/Odroid_C2/filesystem/etc/lirc/lircd.conf.amremote b/projects/Odroid_C2/filesystem/etc/lirc/lircd.conf.amremote
new file mode 100644
index 0000000000..5bd1125445
--- /dev/null
+++ b/projects/Odroid_C2/filesystem/etc/lirc/lircd.conf.amremote
@@ -0,0 +1,34 @@
+begin remote
+
+  name  odroid_amremote
+  bits           16
+  flags SPACE_ENC|CONST_LENGTH
+  eps            30
+  aeps          100
+
+  header       9000  4500
+  one           563  1687
+  zero          563   562
+  ptrail        563
+  repeat       9000  2250
+  pre_data_bits   16
+  pre_data       0x4DB2
+  gap          0
+  suppress_repeat 1
+
+      begin codes
+          KEY_POWER                0x3BC4
+          KEY_MUTE                 0x11EE
+          KEY_HOME                 0x41BE
+          KEY_ENTER                0x738C
+          KEY_LEFT                 0x9966
+          KEY_RIGHT                0x837C
+          KEY_UP                   0x53AC
+          KEY_DOWN                 0x4BB4
+          KEY_BACK                 0x59A6
+          KEY_MENU                 0xA35C
+          KEY_VOLUMEDOWN           0x817E
+          KEY_VOLUMEUP             0x01FE
+      end codes
+
+end remote