linux (RPi): add patch to disable SD SQE by default on RPi5

This is still too experimental and seems to cause issues with
some SD cards.

Signed-off-by: Matthias Reichl <hias@horus.com>

packages/linux/patches/raspberrypi/linux-001-Revert-DTS-bcm2712-re-enable-SD-slot-CQE-by-default-.patch

@@ -0,0 +1,47 @@
+From be6a324c450c40a2c2c9461fcd8258ec07338d0a Mon Sep 17 00:00:00 2001
+From: Matthias Reichl <hias@horus.com>
+Date: Wed, 13 Nov 2024 00:14:13 +0100
+Subject: [PATCH 1/3] Revert "DTS: bcm2712; re-enable SD slot CQE by default on
+ Pi 5"
+
+This reverts commit 48a15bc46004025776880a091d47a22e03449acc.
+
+CQE still seems to experimental and cause issues with some cards
+so keep it disabled by default for now.
+---
+ arch/arm/boot/dts/overlays/README                | 6 +++---
+ arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 1 -
+ 2 files changed, 3 insertions(+), 4 deletions(-)
+
+diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README
+index 5c6344eb6f98..af1d82cffd47 100644
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -378,9 +378,9 @@ Params:
+                                 non-lite SKU of CM4).
+                                 (default "on")
+ 
+-        sd_cqe                  Set to "off" to disable Command Queueing if you
+-                                have an incompatible Class A2 SD card
+-                                (Pi 5 only, default "on")
++        sd_cqe                  Use to enable Command Queueing on the SD
++                                interface for faster Class A2 card performance
++                                (Pi 5 only, default "off")
+ 
+         sd_overclock            Clock (in MHz) to use when the MMC framework
+                                 requests 50MHz
+diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+index a63ee4b678a1..56d416e82dd5 100644
+--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
++++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+@@ -365,7 +365,6 @@ &sdio1 {
+ 	sd-uhs-sdr50;
+ 	sd-uhs-ddr50;
+ 	sd-uhs-sdr104;
+-	supports-cqe;
+ 	cd-gpios = <&gio_aon 5 GPIO_ACTIVE_LOW>;
+ 	//no-1-8-v;
+ 	status = "okay";
+-- 
+2.39.5
+