bcm2835-bootloader: merge image makescript with scripts/mkimage, rename 'mkimage-syslinux' to 'mkimage'

Signed-off-by: Stephan Raue <stephan@openelec.tv>
This commit is contained in:
Stephan Raue 2013-12-27 22:13:41 +01:00
parent 3e1730b120
commit c0de147498
4 changed files with 67 additions and 165 deletions

View File

@ -1,124 +0,0 @@
#!/bin/bash
################################################################################
# This file is part of OpenELEC - http://www.openelec.tv
# Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
#
# OpenELEC is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
#
# OpenELEC is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with OpenELEC. If not, see <http://www.gnu.org/licenses/>.
################################################################################
cleanup()
{
echo "image: cleanup..."
umount "$OE_TMP" &>/dev/null || :
losetup -d "$LOOP"
[ -f "$OE_TMP/ldlinux.sys" ] && chattr -i "$OE_TMP/ldlinux.sys" || :
rm -rf "$OE_TMP"
exit
}
trap cleanup SIGINT
# set variables
OE_TMP=$(mktemp -d)
SYSTEM_SIZE=128
# 3STORAGE_SIZE must be >= 32 !
STORAGE_SIZE=32
DISK_SIZE=$(( $SYSTEM_SIZE + $STORAGE_SIZE ))
DISK="$TARGET_IMG/$IMAGE_NAME.img"
LOOP=$(losetup -f)
# ensure loopX not in use
umount "$OE_TMP" &>/dev/null || :
umount "$LOOP" &>/dev/null >/dev/null || :
losetup -d "$LOOP" &>/dev/null >/dev/null || :
# create an image
echo "image: creating image: $DISK..."
dd if=/dev/zero of="$DISK" bs=1M count="$DISK_SIZE"
sync
# write a disklabel
echo "image: creating partition table on $DISK..."
losetup "$LOOP" "$DISK"
parted -s "$LOOP" mklabel msdos
sync
# create part1
echo "image: creating par1 on $DISK..."
SYSTEM_PART_END=$(( $SYSTEM_SIZE * 1024 * 1024 / 512 + 64 ))
parted -s "$LOOP" -a min unit s mkpart primary fat32 64 $SYSTEM_PART_END
parted -s "$LOOP" set 1 boot on
# create part2
echo "image: creating part2 on $DISK..."
STORAGE_PART_START=$(( $SYSTEM_PART_END + 1 ))
parted -s "$LOOP" -a min unit s mkpart primary ext4 $STORAGE_PART_START 100%
sync
# create filesystem on part1
losetup -d "$LOOP"
echo "image: creating filesystem on part1..."
OFFSET=$(( 64 * 512 ))
SIZELIMIT=$(( $SYSTEM_SIZE * 1024 * 1024 ))
losetup -o $OFFSET --sizelimit $SIZELIMIT "$LOOP" "$DISK"
mkfs.vfat "$LOOP"
sync
# mount partition
echo "image: mounting part1 on $OE_TMP..."
mount "$LOOP" "$OE_TMP"
# create bootloader configuration
echo "image: creating bootloader configuration..."
cat >"$OE_TMP/cmdline.txt" << EOF
boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet
EOF
# copy files
echo "image: copying files to part1..."
cp $RELEASE_DIR/3rdparty/bootloader/bootcode.bin "$OE_TMP"
cp $RELEASE_DIR/3rdparty/bootloader/fixup.dat "$OE_TMP"
cp $RELEASE_DIR/3rdparty/bootloader/start.elf "$OE_TMP"
cp $TARGET_IMG/$IMAGE_NAME.kernel "$OE_TMP/kernel.img"
cp $TARGET_IMG/$IMAGE_NAME.system "$OE_TMP/SYSTEM"
# unmount part1
echo "image: unmounting part1..."
umount "$LOOP"
sync
# create filesystem on part2
losetup -d "$LOOP"
echo "image: creating filesystem on part2..."
OFFSET=$(( $STORAGE_PART_START * 512 ))
losetup -o $OFFSET "$LOOP" "$DISK"
mke2fs -q -t ext4 -m 0 "$LOOP"
e2fsck -n "$LOOP"
sync
# add resize mark
echo "image: mounting part2 on $OE_TMP..."
mount "$LOOP" "$OE_TMP"
touch "$OE_TMP/.please_resize_me"
echo "image: unmounting part2..."
umount "$LOOP"
sync
# gzip
echo "image: compressing..."
gzip $DISK
# cleanup
cleanup

View File

@ -25,13 +25,3 @@ mkdir -p $RELEASE_DIR/3rdparty/bootloader
cp -PR $BUILD/bcm2835-bootloader-*/bootcode.bin $RELEASE_DIR/3rdparty/bootloader/
cp -PR $BUILD/bcm2835-bootloader-*/fixup_x.dat $RELEASE_DIR/3rdparty/bootloader/fixup.dat
cp -PR $BUILD/bcm2835-bootloader-*/start_x.elf $RELEASE_DIR/3rdparty/bootloader/start.elf
if [ "$BUILD_IMAGE" = "yes" -a -x "$BOOTLOADER_DIR/image" ] ; then
# variables used in image script must be passed
sudo env \
PATH="$PATH:/usr/sbin:/sbin" \
TARGET_IMG="$TARGET_IMG" \
IMAGE_NAME="$IMAGE_NAME" \
RELEASE_DIR="$RELEASE_DIR" \
$BOOTLOADER_DIR/image
fi

View File

@ -267,8 +267,8 @@ IMAGE_NAME="$DISTRONAME-$TARGET_VERSION"
tar cf $TARGET_IMG/$IMAGE_NAME.tar -C target $IMAGE_NAME
# create image files if requested
if [ "$1" = "mkimage" -a -f $SCRIPTS/mkimage-$BOOTLOADER ]; then
. $SCRIPTS/mkimage-$BOOTLOADER
if [ "$1" = "mkimage" -a -n "$BOOTLOADER" ]; then
. $SCRIPTS/mkimage
fi
# cleanup release dir

View File

@ -20,7 +20,9 @@
. config/options $1
$SCRIPTS/build syslinux:host
if [ "$BOOTLOADER" = "syslinux" ]; then
$SCRIPTS/build syslinux:host
fi
# set variables
UUID_SYSTEM=$(uuidgen)
@ -28,7 +30,11 @@ $SCRIPTS/build syslinux:host
OE_TMP=$(mktemp -d)
LOOP=$(losetup -f)
SYSTEM_SIZE=256
if [ "$BOOTLOADER" = "bcm2835-bootloader" ]; then
SYSTEM_SIZE=128
else
SYSTEM_SIZE=256
fi
STORAGE_SIZE=32 # STORAGE_SIZE must be >= 32 !
DISK_SIZE=$(( $SYSTEM_SIZE + $STORAGE_SIZE ))
@ -65,7 +71,11 @@ trap cleanup SIGINT
# create part1
echo "image: creating part1 on $DISK..."
SYSTEM_PART_END=$(( $SYSTEM_SIZE * 1024 * 1024 / 512 + 64 ))
sudo parted -s "$LOOP" -a min unit s mkpart primary ext4 64 $SYSTEM_PART_END
if [ "$BOOTLOADER" = "syslinux" ]; then
sudo parted -s "$LOOP" -a min unit s mkpart primary ext4 64 $SYSTEM_PART_END
elif [ "$BOOTLOADER" = "bcm2835-bootloader" ]; then
sudo parted -s "$LOOP" -a min unit s mkpart primary fat32 64 $SYSTEM_PART_END
fi
sudo parted -s "$LOOP" set 1 boot on
# create part2
@ -74,13 +84,15 @@ trap cleanup SIGINT
sudo parted -s "$LOOP" -a min unit s mkpart primary ext4 $STORAGE_PART_START 100%
sync
# write mbr
echo "image: writing mbr..."
MBR="$ROOT/$TOOLCHAIN/share/syslinux/mbr.bin"
if [ -n "$MBR" ]; then
sudo dd bs=440 count=1 conv=notrunc if="$MBR" of="$LOOP"
fi
sync
if [ "$BOOTLOADER" = "syslinux" ]; then
# write mbr
echo "image: writing mbr..."
MBR="$ROOT/$TOOLCHAIN/share/syslinux/mbr.bin"
if [ -n "$MBR" ]; then
sudo dd bs=440 count=1 conv=notrunc if="$MBR" of="$LOOP"
fi
sync
fi
# create filesystem on part1
sudo losetup -d "$LOOP"
@ -88,19 +100,23 @@ trap cleanup SIGINT
OFFSET=$(( 64 * 512 ))
SIZELIMIT=$(( $SYSTEM_SIZE * 1024 * 1024 ))
sudo losetup -o $OFFSET --sizelimit $SIZELIMIT "$LOOP" "$DISK"
sudo mke2fs -q -t ext4 -m 0 "$LOOP"
sudo tune2fs -U $UUID_SYSTEM "$LOOP"
sudo e2fsck -n "$LOOP"
if [ "$BOOTLOADER" = "syslinux" ]; then
sudo mke2fs -q -t ext4 -m 0 "$LOOP"
sudo tune2fs -U $UUID_SYSTEM "$LOOP"
sudo e2fsck -n "$LOOP"
elif [ "$BOOTLOADER" = "bcm2835-bootloader" ]; then
sudo mkfs.vfat "$LOOP"
fi
sync
# mount partition
echo "image: mounting part1 on $OE_TMP..."
sudo mount "$LOOP" "$OE_TMP"
# create bootloader configuration
echo "image: creating bootloader configuration..."
# cat >"$OE_TMP"/syslinux.cfg << EOF
cat << EOF | sudo tee "$OE_TMP"/syslinux.cfg
if [ "$BOOTLOADER" = "syslinux" ]; then
# create bootloader configuration
echo "image: creating bootloader configuration..."
cat << EOF | sudo tee "$OE_TMP"/syslinux.cfg
UI vesamenu.c32
PROMPT 0
MENU TITLE Boot Menu
@ -141,18 +157,34 @@ LABEL live
APPEND boot=UUID=$UUID_SYSTEM disk=UUID=$UUID_STORAGE quiet vga=current
EOF
# install extlinux
echo "image: installing extlinux to part1..."
sudo $ROOT/$TOOLCHAIN/bin/extlinux --heads=4 --sector=32 -i "$OE_TMP"
# install extlinux
echo "image: installing extlinux to part1..."
sudo $ROOT/$TOOLCHAIN/bin/extlinux --heads=4 --sector=32 -i "$OE_TMP"
# copy files
echo "image: copying files to part1..."
sudo cp $TARGET_IMG/$IMAGE_NAME.kernel "$OE_TMP/KERNEL"
sudo cp $TARGET_IMG/$IMAGE_NAME.system "$OE_TMP/SYSTEM"
sudo cp $RELEASE_DIR/splash.png "$OE_TMP"
sudo cp $ROOT/$TOOLCHAIN/share/syslinux/vesamenu.c32 "$OE_TMP"
sudo cp $ROOT/$TOOLCHAIN/share/syslinux/libcom32.c32 "$OE_TMP"
sudo cp $ROOT/$TOOLCHAIN/share/syslinux/libutil.c32 "$OE_TMP"
# copy files
echo "image: copying files to part1..."
sudo cp $TARGET_IMG/$IMAGE_NAME.kernel "$OE_TMP/KERNEL"
sudo cp $TARGET_IMG/$IMAGE_NAME.system "$OE_TMP/SYSTEM"
sudo cp $RELEASE_DIR/splash.png "$OE_TMP"
sudo cp $ROOT/$TOOLCHAIN/share/syslinux/vesamenu.c32 "$OE_TMP"
sudo cp $ROOT/$TOOLCHAIN/share/syslinux/libcom32.c32 "$OE_TMP"
sudo cp $ROOT/$TOOLCHAIN/share/syslinux/libutil.c32 "$OE_TMP"
elif [ "$BOOTLOADER" = "bcm2835-bootloader" ]; then
# create bootloader configuration
echo "image: creating bootloader configuration..."
cat << EOF | sudo tee "$OE_TMP"/cmdline.txt
boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet
EOF
# copy files
echo "image: copying files to part1..."
sudo cp $TARGET_IMG/$IMAGE_NAME.kernel "$OE_TMP/kernel.img"
sudo cp $TARGET_IMG/$IMAGE_NAME.system "$OE_TMP/SYSTEM"
sudo cp $RELEASE_DIR/3rdparty/bootloader/bootcode.bin "$OE_TMP"
sudo cp $RELEASE_DIR/3rdparty/bootloader/fixup.dat "$OE_TMP"
sudo cp $RELEASE_DIR/3rdparty/bootloader/start.elf "$OE_TMP"
fi # bootloader
# unmount part1
echo "image: unmounting part1..."
@ -169,14 +201,18 @@ EOF
sudo e2fsck -n "$LOOP"
sync
# mount part2
echo "image: mounting part2 on $OE_TMP..."
sudo mount "$LOOP" "$OE_TMP"
# add resize mark
sudo touch "$OE_TMP/.please_resize_me"
sync
# unmount part2
echo "image: unmounting part2..."
sync
sudo umount "$LOOP"
sync
# gzip
echo "image: compressing..."