projects/WeTek_Core: use Wi-Fi and Bluetooth firmware from wlan-firmware-aml package

projects/WeTek_Core/filesystem/usr/lib/firmware/brcm/ap6330-nvram.txt

@@ -1,82 +0,0 @@
-#AP6330_NVRAM_V1.0_20121130
-#Sample variables file for BCM94330 SD FC AGB board
-manfid=0x2d0
-prodid=0x0547
-vendid=0x14e4
-devid=0x4360
-boardtype=0x05e1
-boardrev=0x1202
-boardflags=0x0080200
-nocrc=1
-xtalfreq=26000
-boardnum=22
-macaddr=00:90:4c:c5:12:38
-ag0=254
-aa2g=1
-ccode=ALL
-pa0itssit=0x20
-pa0b0=5587
-pa0b1=-633
-pa0b2=-158
-rssismf2g=0xa
-rssismc2g=0x3
-rssisav2g=0x7
-#rssi params for 5GHz
-rssismf5g=0x4
-rssismc5g=0x3
-rssisav5g=0x7
-#PA parameters for lower a-band
-pa1lob0=4748
-pa1lob1=-566
-pa1lob2=-180
-#PA parameters for midband
-pa1b0=4762
-pa1b1=-593
-pa1b2=-172
-#PA parameters for high band
-#pa1hib0=4596
-pa1hib0=4666
-pa1hib1=-619
-pa1hib2=-163
-rxpo5g=0
-maxp2ga0=74
-maxp5ga0=66
-maxp5gla0=66
-maxp5gha0=66
-# 2.4G Tx Power offsets
-cck2gpo=0x2222
-ofdm2gpo=0x44444444
-mcs2gpo0=0x6666
-mcs2gpo1=0x6666
-# 5G Tx Power offsets
-ofdm5gpo=0x44444444
-ofdm5glpo=0x44444444
-ofdm5ghpo=0x44444444
-mcs5gpo0=0x6666
-mcs5gpo1=0x6666
-mcs5glpo0=0x6666
-mcs5glpo1=0x6666
-mcs5ghpo0=0x6666
-mcs5ghpo1=0x6666
-sromrev=3
-il0macaddr=00:90:4c:c5:12:38
-wl0id=0x431b
-cckPwrOffset=4
-swctrlmap_2g=0x44844484,0x42824282,0x40804484,0x18282,0x1ff
-triso5g=0
-swctrlmap_5g=0x00100010,0x20202020,0x20202020,0x14202,0x0f0
-rfreg033=0x19
-rfreg033_cck=0x1f
-dacrate2g=160
-dacrate5g=160
-txalpfbyp2g=1
-bphyscale=17
-cckPwrIdxCorr=-15
-pacalidx2g=50
-#pacalidx5g=20
-noise_cal_ref_2g=53
-noise_cal_po_2g=0
-noise_cal_ref_5g=52
-noise_cal_po_5g=5,0,0
-# 4330 OOB parameter: High level trigger
-muxenab=0x10

projects/WeTek_Core/linux/linux.arm.conf

@@ -1155,7 +1155,7 @@ CONFIG_AM_WIFI_USB=y
 # CONFIG_RTL8188EU_MP is not set
 CONFIG_SDIO_DHD_CDC_WIFI_40181_MODULE=m
 CONFIG_BCMDHD_FW_PATH="/lib/firmware/brcm/"
-CONFIG_BCMDHD_NVRAM_PATH="/lib/firmware/brcm/ap6330-nvram.txt"
+CONFIG_BCMDHD_NVRAM_PATH="/lib/firmware/brcm/nvram_ap6330.txt"
 CONFIG_BCMDHD_CONFIG_PATH="/etc/wifi/config.txt"
 CONFIG_BCMDHD_POWER_OFF_IN_SUSPEND=y
 CONFIG_BCMDHD_OOB=y

projects/WeTek_Core/options

@@ -123,7 +123,7 @@
   # additional Firmware to use (dvb-firmware, misc-firmware, wlan-firmware)
   # Space separated list is supported,
   # e.g. FIRMWARE="dvb-firmware misc-firmware wlan-firmware"
-    FIRMWARE="misc-firmware wlan-firmware dvb-firmware brcmfmac_sdio-firmware-aml"
+    FIRMWARE="misc-firmware wlan-firmware wlan-firmware-aml dvb-firmware brcmfmac_sdio-firmware-aml"
 
   # build and install ATV IR remote support (yes / no)
     ATVCLIENT_SUPPORT="no"