mirror of
https://github.com/arendst/Tasmota.git
synced 2025-07-25 19:56:30 +00:00
Refactor TWAI driver
This commit is contained in:
Theo Arends
parent
2d2c732e2e
commit
02225ea7c4
@ -12,16 +12,17 @@
|
||||
* ESP32 Two-Wire Automotive Interface (TWAI) or Controller Area Network (CAN) - needs external tranceiver
|
||||
*
|
||||
* The TWAI controller is not compatible with ISO11898-1 FD Format frames, and will interpret such frames as errors.
|
||||
*
|
||||
* CAN bus message format is 32-bit identifier and up to 8 bytes of data
|
||||
*
|
||||
* For versalitlity decoding CAN-bus needs a berry script with class "can_bus" and function "decode"
|
||||
* You'll needs a berry driver with class "twai" and functions "config" and "decode" as shown below
|
||||
\*********************************************************************************************/
|
||||
|
||||
#define XDRV_91 91
|
||||
|
||||
#define TWAI_POLLING_RATE_MS 100
|
||||
|
||||
#include "driver/twai.h"
|
||||
|
||||
enum TwaiSpeeds { TWAI_SPEED_25KBITS = 0,
|
||||
TWAI_SPEED_50KBITS,
|
||||
TWAI_SPEED_100KBITS,
|
||||
@ -32,20 +33,174 @@ enum TwaiSpeeds { TWAI_SPEED_25KBITS = 0,
|
||||
TWAI_SPEED_1MBITS,
|
||||
TWAI_SPEED_MAX };
|
||||
|
||||
#include "driver/twai.h"
|
||||
const char kTwaiSpeeds[] PROGMEM = "25K|50K|100K|125K|250K|500K|800K|1M";
|
||||
const char kTwaiModes[] PROGMEM = "Normal|No Ack|Listen Only";
|
||||
|
||||
struct TWAIs {
|
||||
twai_mode_t mode;
|
||||
uint8_t speed;
|
||||
bool supported;
|
||||
bool installed;
|
||||
} Twai;
|
||||
|
||||
#ifdef USE_BERRY
|
||||
/*********************************************************************************************\
|
||||
* Low level
|
||||
* Berry example code
|
||||
\*********************************************************************************************/
|
||||
|
||||
/*
|
||||
file twai.be contents:
|
||||
|
||||
tasmota.remove_driver(twai)
|
||||
|
||||
class twai_cls
|
||||
var active # (bool)
|
||||
var twai_speed, twai_mode # (int, int)
|
||||
var am012_status, am014_substatus, am024_power # (int, int, int)
|
||||
var pressure, setpoint, flow_temp # (float, float, float)
|
||||
|
||||
def init()
|
||||
self.active = 0
|
||||
self.twai_speed = 7 # 0 = 25K, 1 = 50K, 2 = 100K, 3 = 125K, 4 = 250K, 5 = 500K, 6 = 800K, 7 = 1Mbits
|
||||
self.twai_mode = 2 # 0 = TWAI_MODE_NORMAL, 1 = TWAI_MODE_NO_ACK, 2 = TWAI_MODE_LISTEN_ONLY
|
||||
self.am012_status = 0
|
||||
self.am014_substatus = 0
|
||||
self.am024_power = 0
|
||||
self.pressure = 0
|
||||
self.setpoint = 0
|
||||
self.flow_temp = 0
|
||||
end
|
||||
|
||||
def config()
|
||||
return self.twai_mode << 3 | self.twai_speed
|
||||
end
|
||||
|
||||
def decode(ident, data1, data2)
|
||||
var id = ident & 0xfff
|
||||
if id == 0x076
|
||||
# tasmota.log(f"RMH: 0x{id:03x} Count {data1}", 3)
|
||||
elif id == 0x100
|
||||
var time = 441763200 + (data2 * 24 * 60 * 60) + (data1 / 1000)
|
||||
# tasmota.log(f"RMH: 0x{id:03x} Time {tasmota.time_str(time)}", 3)
|
||||
elif id == 0x1C1
|
||||
if data1 & 0x3ff == 0x300
|
||||
self.pressure = (data2 & 0xff00) / 2560.0
|
||||
end
|
||||
elif id == 0x382
|
||||
self.am024_power = data1 & 0xff # Relative power
|
||||
self.setpoint = (data1 & 0xffff00)/25600.0 # Setpoint
|
||||
# tasmota.log(f"RMH: 0x{id:03x} Busy {self.am024_power}%, Setpoint {self.setpoint}", 3)
|
||||
elif id == 0x282
|
||||
self.flow_temp = (data1 & 0xffff00)/25600.0
|
||||
# tasmota.log(f"RMH: 0x{id:03x} DHW temp {self.flow_temp}", 3)
|
||||
elif id == 0x481
|
||||
self.am012_status = data1 & 0xff
|
||||
self.am014_substatus = (data1 & 0xff00)/256
|
||||
else
|
||||
return
|
||||
end
|
||||
self.active = 1 # At least one valid decode
|
||||
end
|
||||
|
||||
#- add sensor value to teleperiod -#
|
||||
def json_append()
|
||||
if !self.active return nil end # Exit if never decoded something
|
||||
import string
|
||||
var msg = string.format(",\"Calenta\":{\"AM012\":%i,\"AM014\":%i,\"Pressure\":%.1f,\"Setpoint\":%.1f,\"Flow\":%.1f}",
|
||||
self.am012_status, self.am014_substatus, self.pressure, self.setpoint, self.flow_temp)
|
||||
tasmota.response_append(msg)
|
||||
end
|
||||
|
||||
#- display sensor value in the web UI -#
|
||||
def web_sensor()
|
||||
if !self.active return nil end # Exit if never decoded something
|
||||
import string
|
||||
var msg = string.format("{s}AM012/AM014 State{m}%i/%i{e}"..
|
||||
"{s}AM024 Relative Power{m}%i %%{e}"..
|
||||
"{s}Pressure{m}%.1f{e}"..
|
||||
"{s}Setpoint Temperature{m}%.1f{e}"..
|
||||
"{s}Flow Temperature{m}%.1f{e}",
|
||||
self.am012_status, self.am014_substatus, self.am024_power, self.pressure, self.setpoint, self.flow_temp)
|
||||
tasmota.web_send_decimal(msg)
|
||||
end
|
||||
end
|
||||
twai = twai_cls()
|
||||
tasmota.add_driver(twai)
|
||||
|
||||
// *******************************************************************************************
|
||||
|
||||
file preinit.be contents:
|
||||
|
||||
load('twai.be')
|
||||
*/
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Berry interface
|
||||
\*********************************************************************************************/
|
||||
|
||||
bool TWAIBerryDecode(uint32_t identifier, uint32_t data_length_code, uint8_t *data) {
|
||||
bvm *vm = berry.vm;
|
||||
if (nullptr == vm) { return false; }
|
||||
bool handled = false;
|
||||
if (be_getglobal(vm, "twai")) { // Look for class
|
||||
if (be_getmember(vm, 1, "decode")) { // and function
|
||||
be_pushvalue(vm, -2);
|
||||
|
||||
uint32_t ident = identifier | data_length_code << 28;
|
||||
uint32_t data1 = data[3] << 24 | data[2] << 16 | data[1] << 8 | data[0];
|
||||
uint32_t data2 = data[7] << 24 | data[6] << 16 | data[5] << 8 | data[4];
|
||||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("TWA: ident %08X, data1 %08X, data2 %08X"), ident, data1, data2);
|
||||
|
||||
be_pushint(vm, ident);
|
||||
be_pushint(vm, data1);
|
||||
be_pushint(vm, data2);
|
||||
int32_t ret = be_pcall(vm, 4); // Number of arguments, self, ident. data1, data2
|
||||
if (ret != 0) {
|
||||
be_error_pop_all(vm); // Clear Berry stack
|
||||
}
|
||||
handled = true;
|
||||
}
|
||||
}
|
||||
be_pop(vm, be_top(vm)); // Clean
|
||||
return handled;
|
||||
}
|
||||
|
||||
/*********************************************************************************************/
|
||||
|
||||
bool TWAIBerryConfig(void) {
|
||||
bvm *vm = berry.vm;
|
||||
if (nullptr == vm) { return false; }
|
||||
bool handled = false;
|
||||
if (be_getglobal(vm, "twai")) { // Look for class
|
||||
if (be_getmember(vm, 1, "config")) { // and function
|
||||
be_pushvalue(vm, -2);
|
||||
int32_t ret = be_pcall(vm, 1); // Number of arguments, self
|
||||
if (ret != 0) {
|
||||
be_error_pop_all(vm); // Clear Berry stack
|
||||
}
|
||||
be_pop(vm, 1);
|
||||
if (be_isint(vm, -1)) {
|
||||
uint32_t config = be_toint(vm, -1);
|
||||
Twai.speed = config & 0x7; // User input check 0..7
|
||||
uint32_t mode = config >> 3 & 0x3;
|
||||
if (mode > 2) { mode = 2; } // User input check 0..2
|
||||
Twai.mode = (twai_mode_t)mode;
|
||||
handled = true;
|
||||
}
|
||||
}
|
||||
}
|
||||
be_pop(vm, be_top(vm)); // Clean
|
||||
return handled;
|
||||
}
|
||||
|
||||
#endif // USE_BERRY
|
||||
|
||||
/*********************************************************************************************\
|
||||
* TWAI low level
|
||||
\*********************************************************************************************/
|
||||
|
||||
bool TWAIStart(void) {
|
||||
twai_general_config_t g_config = TWAI_GENERAL_CONFIG_DEFAULT((gpio_num_t)Pin(GPIO_TWAI_TX), (gpio_num_t)Pin(GPIO_TWAI_RX), TWAI_MODE_NORMAL);
|
||||
twai_general_config_t g_config = TWAI_GENERAL_CONFIG_DEFAULT((gpio_num_t)Pin(GPIO_TWAI_TX), (gpio_num_t)Pin(GPIO_TWAI_RX), Twai.mode);
|
||||
g_config.rx_queue_len = 32;
|
||||
|
||||
twai_timing_config_t t_config;
|
||||
@ -95,8 +250,13 @@ bool TWAIStart(void) {
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("TWA: Failed to reconfigure CAN alerts"));
|
||||
return false;
|
||||
}
|
||||
|
||||
Twai.installed = true;
|
||||
|
||||
char smode[16];
|
||||
GetTextIndexed(smode, sizeof(smode), Twai.mode, kTwaiModes);
|
||||
char sspeed[16];
|
||||
GetTextIndexed(sspeed, sizeof(sspeed), Twai.speed, kTwaiSpeeds);
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("TWA: Started in %s Mode and %sbit/s"), smode, sspeed);
|
||||
return true;
|
||||
}
|
||||
|
||||
@ -107,6 +267,7 @@ void TWAIStop(void) {
|
||||
twai_stop();
|
||||
twai_driver_uninstall();
|
||||
Twai.installed = false;
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("TWA: Stopped"));
|
||||
}
|
||||
}
|
||||
|
||||
@ -123,7 +284,7 @@ uint32_t TWAICheckAlerts(void) {
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("TWA: Alert - Controller has become error passive"));
|
||||
}
|
||||
if (alerts_triggered & TWAI_ALERT_BUS_ERROR) {
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("TWA: Alert - A (Bit, Stuff, CRC, Form, ACK) error has occurred on the bus. Errors %d"), twaistatus.bus_error_count);
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("TWA: Alert - A Bit, Stuff, CRC, Form or ACK error has occurred on the bus. Errors %d"), twaistatus.bus_error_count);
|
||||
}
|
||||
if (alerts_triggered & TWAI_ALERT_RX_QUEUE_FULL) {
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("TWA: Alert - The RX queue is full causing a received frame to be lost. Buffered %d, Missed %d, Overrun %d"),
|
||||
@ -149,122 +310,14 @@ void TWAIRead(void) {
|
||||
// One or more messages received. Handle all.
|
||||
twai_message_t message;
|
||||
while (twai_receive(&message, 0) == ESP_OK) {
|
||||
TWAIDecode(message.identifier, message.data_length_code, message.data);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Decoding
|
||||
\*********************************************************************************************/
|
||||
|
||||
void TWAIDecode(uint32_t identifier, uint32_t data_length_code, uint8_t *data) {
|
||||
|
||||
#ifdef USE_BERRY
|
||||
bvm *vm = berry.vm;
|
||||
if (nullptr != vm) {
|
||||
if (be_getglobal(vm, "can_bus")) { // Look for class can_bus
|
||||
if (be_getmember(vm, 1, "decode")) { // and function decode
|
||||
be_pushvalue(vm, -2);
|
||||
|
||||
uint32_t ident = identifier | data_length_code << 28;
|
||||
uint32_t data1 = data[3] << 24 | data[2] << 16 | data[1] << 8 | data[0];
|
||||
uint32_t data2 = data[7] << 24 | data[6] << 16 | data[5] << 8 | data[4];
|
||||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("CAN: ident %08X, data1 %08X, data2 %08X"), ident, data1, data2);
|
||||
|
||||
be_pushint(vm, ident);
|
||||
be_pushint(vm, data1);
|
||||
be_pushint(vm, data2);
|
||||
BrTimeoutStart();
|
||||
int32_t ret = be_pcall(vm, 4); // number of arguments
|
||||
BrTimeoutReset();
|
||||
if (ret != 0) {
|
||||
be_error_pop_all(vm); // clear Berry stack
|
||||
}
|
||||
be_pop(vm, be_top(vm)); // clean
|
||||
return;
|
||||
}
|
||||
}
|
||||
be_pop(vm, be_top(vm)); // clean
|
||||
}
|
||||
|
||||
/*
|
||||
file can_bus.be contents:
|
||||
|
||||
class can_bus_cls
|
||||
var am012_status
|
||||
var am014_substatus
|
||||
var am024_power
|
||||
var pressure
|
||||
var setpoint
|
||||
var flow_temp
|
||||
|
||||
def init()
|
||||
self.am012_status = 0
|
||||
self.am014_substatus = 0
|
||||
self.am024_power = 0
|
||||
self.pressure = 0
|
||||
self.setpoint = 0
|
||||
self.flow_temp = 0
|
||||
end
|
||||
|
||||
def decode(ident, data1, data2)
|
||||
var id = ident & 0xfff
|
||||
if id == 0x076
|
||||
# tasmota.log(f"RMH: 0x{id:03x} Count {data1}", 3)
|
||||
elif id == 0x100
|
||||
var time = 441763200 + (data2 * 24 * 60 * 60) + (data1 / 1000)
|
||||
# tasmota.log(f"RMH: 0x{id:03x} Time {tasmota.time_str(time)}", 3)
|
||||
elif id == 0x1C1
|
||||
if data1 & 0x3ff == 0x300
|
||||
self.pressure = (data2 & 0xff00) / 2560.0
|
||||
end
|
||||
elif id == 0x382
|
||||
self.am024_power = data1 & 0xff # Relative power
|
||||
self.setpoint = (data1 & 0xffff00)/25600.0 # Setpoint
|
||||
# tasmota.log(f"RMH: 0x{id:03x} Busy {self.am024_power}%, Setpoint {self.setpoint}", 3)
|
||||
elif id == 0x282
|
||||
self.flow_temp = (data1 & 0xffff00)/25600.0
|
||||
# tasmota.log(f"RMH: 0x{id:03x} DHW temp {self.flow_temp}", 3)
|
||||
elif id == 0x481
|
||||
self.am012_status = data1 & 0xff
|
||||
self.am014_substatus = (data1 & 0xff00)/256
|
||||
end
|
||||
end
|
||||
|
||||
#- add sensor value to teleperiod -#
|
||||
def json_append()
|
||||
import string
|
||||
var msg = string.format(",\"Calenta\":{\"AM012\":%i,\"AM014\":%i,\"Pressure\":%.1f,\"Setpoint\":%.1f,\"Flow\":%.1f}",
|
||||
self.am012_status, self.am014_substatus, self.pressure, self.setpoint, self.flow_temp)
|
||||
tasmota.response_append(msg)
|
||||
end
|
||||
|
||||
#- display sensor value in the web UI -#
|
||||
def web_sensor()
|
||||
import string
|
||||
var msg = string.format("{s}AM012/AM014 State{m}%i/%i{e}"..
|
||||
"{s}AM024 Relative Power{m}%i %%{e}"..
|
||||
"{s}Pressure{m}%.1f{e}"..
|
||||
"{s}Setpoint Temperature{m}%.1f{e}"..
|
||||
"{s}Flow Temperature{m}%.1f{e}",
|
||||
self.am012_status, self.am014_substatus, self.am024_power, self.pressure, self.setpoint, self.flow_temp)
|
||||
tasmota.web_send_decimal(msg)
|
||||
end
|
||||
end
|
||||
can_bus = can_bus_cls()
|
||||
tasmota.add_driver(can_bus)
|
||||
|
||||
// ****
|
||||
|
||||
file autoexec.be contents:
|
||||
|
||||
load('can_bus.be')
|
||||
*/
|
||||
if (TWAIBerryDecode(message.identifier, message.data_length_code, message.data)) { continue; }
|
||||
#endif // USE_BERRY
|
||||
|
||||
// Show log if no berry found (Messages come too fast for supporting MQTT at this time)
|
||||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("TWA: Id 0x%08X, Rcvd '%*_H'"), identifier, data_length_code, data);
|
||||
// Show log if no berry found (Messages come too fast for supporting MQTT at this time)
|
||||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("TWA: Id 0x%08X, Rcvd '%*_H'"),
|
||||
message.identifier, message.data_length_code, message.data);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
@ -272,34 +325,16 @@ load('can_bus.be')
|
||||
\*********************************************************************************************/
|
||||
|
||||
void TWAIInit(void) {
|
||||
if (!(PinUsed(GPIO_TWAI_TX) && PinUsed(GPIO_TWAI_RX))) { return; }
|
||||
if (!PinUsed(GPIO_TWAI_TX) || !PinUsed(GPIO_TWAI_RX)) { return; }
|
||||
|
||||
Twai.speed = TWAI_SPEED_1MBITS;
|
||||
if (!TWAIStart()) { return; }
|
||||
|
||||
Twai.supported = true;
|
||||
AddLog(LOG_LEVEL_DEBUG, PSTR("TWA: Started"));
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
* Commands
|
||||
\*********************************************************************************************/
|
||||
|
||||
const char kTwaiCommands[] PROGMEM = "TWAI|" // Prefix
|
||||
"Speed";
|
||||
|
||||
void (* const TwaiCommand[])(void) PROGMEM = {
|
||||
&CmndTWAISpeed };
|
||||
|
||||
void CmndTWAISpeed(void) {
|
||||
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < TWAI_SPEED_MAX)) {
|
||||
if (XdrvMailbox.payload != Twai.speed) {
|
||||
Twai.speed = XdrvMailbox.payload;
|
||||
TWAIStop();
|
||||
TWAIStart();
|
||||
}
|
||||
Twai.mode = TWAI_MODE_LISTEN_ONLY; // 0 = TWAI_MODE_NORMAL, 1 = TWAI_MODE_NO_ACK, 2 = TWAI_MODE_LISTEN_ONLY
|
||||
#ifdef USE_BERRY
|
||||
TWAIBerryConfig();
|
||||
#endif // USE_BERRY
|
||||
if (TWAIStart()) {
|
||||
Twai.supported = true;
|
||||
}
|
||||
ResponseCmndNumber(Twai.speed);
|
||||
}
|
||||
|
||||
/*********************************************************************************************\
|
||||
@ -319,9 +354,6 @@ bool Xdrv91(uint32_t function) {
|
||||
TWAIRead();
|
||||
}
|
||||
break;
|
||||
case FUNC_COMMAND:
|
||||
result = DecodeCommand(kTwaiCommands, TwaiCommand);
|
||||
break;
|
||||
}
|
||||
}
|
||||
return result;
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user