jeans/Tasmota
jeans/Tasmota
1
0
Fork 0
mirror of https://github.com/arendst/Tasmota.git synced 2025-07-23 18:56:38 +00:00
Code Issues Packages Projects Releases Wiki Activity

Clean up debugging

Browse Source
This commit is contained in:
Theo Arends 2022-10-12 17:18:27 +02:00
parent a856275c48
commit 0768f5bc4f
1 changed files with 15 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
tasmota/tasmota_xnrg_energy/xnrg_07_ade7953.ino
View File

@ -24,12 +24,21 @@
* ADE7953 - Energy used in Shelly 2.5 (model 0), Shelly EM (model 1) and Shelly Plus 2PM (model 2)
*
* {"NAME":"Shelly 2.5","GPIO":[320,0,32,0,224,193,0,0,640,192,608,225,3456,4736],"FLAG":0,"BASE":18}
* {"NAME":"Shelly EM","GPIO":[0,0,0,0,0,0,0,0,640,3457,608,224,0,1],"FLAG":0,"BASE":18}
* {"NAME":"Shelly EM","GPIO":[0,0,0,0,0,0,0,0,640,3457,608,224,8832,1],"FLAG":0,"BASE":18}
* {"NAME":"Shelly Plus 2PM PCB v0.1.5","GPIO":[320,0,192,0,0,0,1,1,225,224,0,0,0,0,193,0,0,0,0,0,0,608,3840,32,0,0,0,0,0,640,0,0,3458,4736,0,0],"FLAG":0,"BASE":1,"CMND":"AdcParam1 2,32000,40000,3350"}
* {"NAME":"Shelly Plus 2PM PCB v0.1.9","GPIO":[320,0,0,0,32,192,0,0,225,224,0,0,0,0,193,0,0,0,0,0,0,608,640,3458,0,0,0,0,0,9472,0,4736,0,0,0,0],"FLAG":0,"BASE":1,"CMND":"AdcParam1 2,10000,10000,3350"}
*
* Based on datasheet from https://www.analog.com/en/products/ade7953.html
*
* Model differences:
* Function Model1 Model2 Model3
* ------------------------------ ------ ------ -------
* Shelly 2.5 EM Plus2PM
* Swapped channel A/B Yes No No
* Show negative (reactive) power No Yes No
* Default phasecal 0 200 0
* Default reset pin on ESP8266 - 16 -
*
* I2C Address: 0x38
*********************************************************************************************
* Optionally allowing users to tweak calibration registers:
@ -378,30 +387,20 @@ void Ade7953GetData(void) {
Ade7953.period = value; // Period
} else if (10 == i) {
acc_mode = value; // Accumulation mode
/*
if (ADE7953_SHELLY_25 == Ade7953.model) { // Shelly 2.5 - Swap channel B values due to hardware connection
// if (acc_mode & APSIGN[0]) { acc_mode &= ~APSIGN[0]; } else { acc_mode |= APSIGN[0]; }
// if (acc_mode & VARSIGN[0]) { acc_mode &= ~VARSIGN[0]; } else { acc_mode |= VARSIGN[0]; }
acc_mode ^= (APSIGN[0] | VARSIGN[0]);
// acc_mode ^= 0xA00;
}
*/
} else {
reg[i >> 2][i &3] = value;
reg[i >> 2][i &3] = value; // IRMS, WATT, VA, VAR
}
}
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("ADE: %d, %d, [%d, %d, %d, %d], [%d, %d, %d, %d], 0x%06X"),
Ade7953.voltage_rms, Ade7953.period,
reg[0][0], reg[0][1], reg[0][2], reg[0][3], // IRMS, WATT, VA, VAR
reg[1][0], reg[1][1], reg[1][2], reg[1][3], // IRMS, WATT, VA, VAR
acc_mode);
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("ADE: ACCMODE 0x%06X, VRMS %d, Period %d, IRMS %d, %d, WATT %d, %d, VA %d, %d, VAR %d, %d"),
acc_mode, Ade7953.voltage_rms, Ade7953.period,
reg[0][0], reg[1][0], reg[0][1], reg[1][1], reg[0][2], reg[1][2], reg[0][3], reg[1][3]);
uint32_t apparent_power[2] = { 0, 0 };
uint32_t reactive_power[2] = { 0, 0 };
for (uint32_t channel = 0; channel < 2; channel++) {
Ade7953.current_rms[channel] = reg[channel][0];
if (Ade7953.current_rms[channel] < 2000) { // No load threshold (20mA)
if (Ade7953.current_rms[channel] < 2000) { // No load threshold (20mA)
Ade7953.current_rms[channel] = 0;
Ade7953.active_power[channel] = 0;
} else {
@ -411,13 +410,6 @@ void Ade7953GetData(void) {
}
}
uint32_t current_rms_sum = Ade7953.current_rms[0] + Ade7953.current_rms[1];
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("ADE: U %d, C %d, I %d + %d = %d, P %d + %d"),
Ade7953.voltage_rms, Ade7953.period,
Ade7953.current_rms[0], Ade7953.current_rms[1], current_rms_sum,
Ade7953.active_power[0], Ade7953.active_power[1]);
if (Energy.power_on) { // Powered on
float divider = (Ade7953.calib_data[ADE7953_CAL_AVGAIN] != ADE7953_GAIN_DEFAULT) ? 10000 : Settings->energy_voltage_calibration;
Energy.voltage[0] = (float)Ade7953.voltage_rms / divider;