mirror of
https://github.com/arendst/Tasmota.git
synced 2025-07-24 11:16:34 +00:00
Prep for 6.5
Prep for 6.5
This commit is contained in:
Theo Arends
parent
54032d6c54
commit
0aa220f33b
@ -1,144 +1,81 @@
|
||||
/* 6.5.0 20190319
|
||||
* New Release
|
||||
*
|
||||
* 6.4.2.22 20190315
|
||||
* Remove commands SetOption14 and SetOption63 as it has been superseded by command Interlock
|
||||
* Remove command SetOption35 0-255 for mDNS start-up delay (#4793)
|
||||
* Remove support for MQTT_LIBRARY_TYPE, MQTT_ARDUINOMQTT and MQTT_TASMOTAMQTT (#5474)
|
||||
*
|
||||
* 6.4.1.21 20190309
|
||||
* Fix exception on GUI Configure Logging and Configure Other (#5424)
|
||||
* Add support for sensor SCD30 (#5434)
|
||||
* Add support for commands in sensor drivers
|
||||
* Add 0x to IRRemote (SetOption29) and RCSwitch (SetOption28) received hexadecimal data (#5431)
|
||||
* Add button control when no relay configured (#4682)
|
||||
*
|
||||
* 6.4.1.20 20190304
|
||||
* Changed webserver content handling from single String to small Chunks increasing RAM
|
||||
* Changed logging message handling
|
||||
* Change webserver content handling from single String to small Chunks increasing RAM
|
||||
* Change code use of boolean to bool and byte to uint8_t
|
||||
* Change code uint8_t flags to bool flags
|
||||
* Change sonoff_template.h layout regarding optional module flags like ADC0
|
||||
* Change sonoff_template.h module lay-out by removing non-configurable GPIOs
|
||||
* Change button driver making it modular
|
||||
* Change switch driver making it modular and introduce input filter (#4665, #4724)
|
||||
* Change switch input detection by optimizing switch debounce (#4724)
|
||||
* Change web authentication (#4865)
|
||||
* Change image name BE_MINIMAL to FIRMWARE_MINIMAL and USE_xyz to FIRMWARE_xyz (#5106)
|
||||
* Change GUI weblog from XML to plain text solving possible empty screens (#5154)
|
||||
* Fix most compiler warnings
|
||||
* Fix Display exception 28 when JSON value is NULL received
|
||||
* Fix epaper driver (#4785)
|
||||
* Fix HAss Sensor Discovery Software Watchdog restart (#4831, #4988)
|
||||
* Fix allowable MAX_RULE_VARS to 16 (#4933)
|
||||
* Fix mDNS addService (#4938, #4951)
|
||||
* Fix HAss discovery of MHZ19(B) sensors (#4992)
|
||||
* Fix some exceptions and watchdogs due to lack of stack space (#5215)
|
||||
* Fix GUI wifi password acception starting with asteriks (*) (#5231, #5242)
|
||||
* Fix command WebSend intermittent results (#5273, #5304)
|
||||
* Fix additional characters in fallbacktopic, hostname and mqttclient on core 2.5.0 (#5359, #5417)
|
||||
* Add command Template 255 to copy module configuration over to current active template and store as user template named Merged (#5371)
|
||||
*
|
||||
* 6.4.1.19 20190222
|
||||
* Add command SetOption37 for RGBCW color mapping (#5326)
|
||||
* Add Korean language translations (#5344)
|
||||
* Fix Energy TotalStartTime when commands EnergyReset0 and/or EnergyReset3 used (#5373)
|
||||
* Fix DS18S20 temperature calculation (#5375)
|
||||
* Fix float calculations in range from 0 to -1 (#5386)
|
||||
*
|
||||
* 6.4.1.18 20190221
|
||||
* Fix some exceptions and watchdogs due to lack of stack space - part 1 (#5215)
|
||||
* Fix some exceptions and watchdogs due to lack of stack space - part 2
|
||||
* Add command SetOption62 0/1 to disable retain on Button or Swith hold messages (#5299)
|
||||
* Add option WifiConfig 7 to allow reset of device in AP mode without admin password (#5297)
|
||||
* Fix command WebSend when using a port number as regression from 6.4.1.17 (#5304)
|
||||
*
|
||||
* 6.4.1.17 20190214
|
||||
* Change template update by removing possibility to add user module config keeping template as defined (#5222)
|
||||
* Fix regression from 6.4.1.16 where GPIO9 and GPIO10 connected devices did not work (#5197)
|
||||
* Fix GUI wifi password acception starting with asteriks (*) (#5231, #5242)
|
||||
* Add rule expression enabled by define USE_EXPRESSION in my_user_config.h (#5210)
|
||||
* Add Configure Template menu option to GUI (#5222)
|
||||
* Remove command SetOption62 as it's functionality is replaced by user changing the device template (#5255)
|
||||
* Add property LinkCount to state and status 11 message representing number of Wifi Link re-connections
|
||||
* Add property MqttCount to status 6 message representing number of Mqtt re-connections
|
||||
* Add property Downtime to state and status 11 message representing the duration of wifi connection loss
|
||||
* Fix command WebSend intermittent results (#5273)
|
||||
*
|
||||
* 6.4.1.16 20190211
|
||||
* Initial support for online template change using command Template or GUI Configure Other (#5177)
|
||||
* Add parameter CFG_HOLDER to status 1 message (#5206)
|
||||
* Update GUI
|
||||
*
|
||||
* 6.4.1.15 20190208
|
||||
* Change image name BE_MINIMAL to FIRMWARE_MINIMAL (#5106)
|
||||
* Change image names USE_xyz to FIRMWARE_xyz (#5106)
|
||||
* Fix exception on GUI Configure Logging and Configure Other (#5424)
|
||||
* Add commands PowerCal, VoltageCal and CurrentCal for HLW8012, HJL01 and BL0937 based energy sensors
|
||||
* Add command SerialDelimiter 128 to filter reception of only characters between ASCII 32 and 127 (#5131)
|
||||
* Add status message to former declined group commands (#5145)
|
||||
*
|
||||
* 6.4.1.14 20190203
|
||||
* Add SetOption32 until SetOption49 diagnostic information to Status 3 report as replacement for second property value in SetOption property name
|
||||
* Add Resolution property to Status 3 report providing previous SetOption second value property
|
||||
* Fix IR local echo
|
||||
* Add user configuration of HLW8012 and HJL-01/BL0937 Energy Monitoring as used in Sonoff S31, Pow Ra and many Tuya based devices
|
||||
* Add user configuration of MCP39F501 Energy Monitoring as used in Shelly2
|
||||
* Add support for multiple ADS1115 I2C devices (#5083)
|
||||
* Add rule support for "==", "!=" ">=" and "<=" (#5122)
|
||||
* Add Hass status sensor (#5139)
|
||||
* Change GUI weblog solving possible empty screens (#5154)
|
||||
* Change PN532 support from I2C to Serial for more stability (#5162)
|
||||
* Add MHZ19 Temperature as Domoticz Temperature selection (#5128)
|
||||
*
|
||||
* 6.4.1.13 20190130
|
||||
* Add command SSerialSend5 \<hexdata\> to SerialBridge
|
||||
* Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#4910, #5014)
|
||||
* Add command Template 255 to copy module configuration over to current active template and store as user template named Merged (#5371)
|
||||
* Add command WifiConfig 7 to allow reset of device in AP mode without admin password (#5297)
|
||||
* Add command SetOption36 to control boot loop default restoration (#4645, #5063)
|
||||
* Add resiliency to saved Settings (#5065)
|
||||
*
|
||||
* 6.4.1.12 20190128
|
||||
* Change code use of boolean to bool and byte to uint8_t
|
||||
* Change code uint8_t flags to bool flags
|
||||
*
|
||||
* 6.4.1.11 20190124
|
||||
* Remove command SetOption14 as it has been superseded by command Interlock
|
||||
* Remove command SetOption63 as it has been superseded by command Interlock
|
||||
* Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#5014)
|
||||
* Add core version conditional compile options to provided PWM files (#4917)
|
||||
* Add support for inverted buttons and inverted buttons without pullup (#4914)
|
||||
*
|
||||
* 6.4.1.10 20190121
|
||||
* Fix Hass discovery of MHZ19(B) sensors (#4992)
|
||||
* Fix Hass Software Watchdog exception during discovery (#4988)
|
||||
* Add support for MAX44009 Ambient Light sensor (#4907)
|
||||
*
|
||||
* 6.4.1.9 20190115
|
||||
* Add support for Mi LED Desk Lamp with rotary switch (#4887)
|
||||
* Fix mDNS addService (#4938, #4951)
|
||||
* Fix allowable MAX_RULE_VARS to 16 (#4933)
|
||||
* Add (S)SerialSend3 escape sequence \x to allow hexadecimal byte value (#3560, #4947)
|
||||
* Add SerialBridge command SSerialSend5 <hexdata>
|
||||
*
|
||||
* 6.4.1.8 20190107
|
||||
* Change sonoff_template.h layout regarding optional module flags like ADC0
|
||||
* Add command SetOption62 1 to force no Button/Switch pullup on dedicated modules. Currently only supported on Shelly2 (#4841)
|
||||
* Fix Display exception 28 when JSON value is NULL received
|
||||
* Fix Home Assistant Sensor Discovery Software Watchdog restart (#4831)
|
||||
* Add command SetOption37 for RGBCW color mapping (#5326)
|
||||
* Add command SetOption55 0/1 and define MDNS_ENABLE to disable/enable mDNS (#4793, #4923)
|
||||
* Add command SetOption62 0/1 to disable retain on Button or Switch hold messages (#5299)
|
||||
* Add support for Smanergy KA10 Smart Wall Socket with Energy monitoring
|
||||
* Add support for commands in sensor drivers
|
||||
* Add support for MAX31855 K-Type thermocouple sensor using softSPI (#4764)
|
||||
* Add support for Near Field Communication (NFC) controller PN532 using Serial (#4791, #5162)
|
||||
* Add support for OBI Power Socket 2 (#4829)
|
||||
* Add support for YTF IR Bridge (#4855)
|
||||
* Change web authentication (#4865)
|
||||
* Add support for Mi LED Desk Lamp with rotary switch (#4887)
|
||||
* Add support for Digoo DG-SP202 Smart Socket with Energy monitoring (#4891)
|
||||
* Add support for Smanergy KA10 Smart Wall Socket with Energy monitoring
|
||||
* Add support for MAX44009 Ambient Light sensor (#4907)
|
||||
* Add support for inverted buttons and inverted buttons without pullup (#4914)
|
||||
* Add support for Luminea ZX2820 Smart Socket with Energy monitoring (#4921)
|
||||
* Add define MDNS_ENABLE to control initial mDNS state (#4923)
|
||||
* Add split interlock part 1 (#4910)
|
||||
*
|
||||
* 6.4.1.7 20190106
|
||||
* Fix HLW8012, HJL01 and BL0937 based energy sensors low Power (below 10W) measurement regression from 6.4.1.6
|
||||
* Add Power status functionality to LED2 when configured leaving LED1 for Link status indication
|
||||
* Add no pull-up control to Shelly 2 module (default is pull-up, change GPIO2 to Switch3n for no pull-up) (#4841)
|
||||
* Add 4 seconds startup delay to button control (#4829)
|
||||
* Change button driver making it modular
|
||||
*
|
||||
* 6.4.1.6 20190105
|
||||
* Add commands PowerCal, VoltageCal and CurrentCal for HLW8012, HJL01 and BL0937 based energy sensors
|
||||
*
|
||||
* 6.4.1.5 20190103
|
||||
* Remove command SetOption35 0-255 for mDNS start-up delay (#4793)
|
||||
* Add command SetOption55 0/1 to disable/enable mDNS (#4793)
|
||||
*
|
||||
* 6.4.1.4 20190101
|
||||
* Update Copyright (C) 2019
|
||||
* Fix epaper driver (#4785)
|
||||
* Add support for Near Field Communication (NFC) controller PN532 using I2C (#4791)
|
||||
*
|
||||
* 6.4.1.3 20181229
|
||||
* Change sonoff_template.h module lay-out by removing non-configurable GPIOs
|
||||
* Add support for MAX31855 K-Type thermocouple sensor using softSPI (#4764)
|
||||
*
|
||||
* 6.4.1.2 20181228
|
||||
* Change switch driver making it modular and introduce input filter (#4665, #4724)
|
||||
* Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (#4738)
|
||||
* Add support for multiple ADS1115 I2C devices (#5083)
|
||||
* Add support for online template change using command Template or GUI Configure Other (#5177)
|
||||
* Add support for Korean language translations (#5344)
|
||||
* Add support for sensor SCD30 (#5434)
|
||||
* Add parameter CFG_HOLDER to status 1 message (#5206)
|
||||
* Add SetOption32 until SetOption49 diagnostic information to Status 3 report as replacement for second property value in SetOption property name
|
||||
* Add Resolution property to Status 3 report providing previous SetOption second value property
|
||||
* Add property MqttCount to status 6 message representing number of Mqtt re-connections
|
||||
* Add property LinkCount to state and status 11 message representing number of Wifi Link re-connections
|
||||
* Add property Downtime to state and status 11 message representing the duration of wifi connection loss
|
||||
* Add variable %timestamp% to rules (#4749)
|
||||
*
|
||||
* 6.4.1.1 20181224
|
||||
* Fix most compiler warnings
|
||||
* Change switch input detection by optimizing switch debounce (#4724)
|
||||
* Add rule support for "==", "!=" ">=" and "<=" (#5122)
|
||||
* Add rule expression enabled by define USE_EXPRESSION in my_user_config.h (#5210)
|
||||
* Add Power status functionality to LED2 when configured leaving LED1 for Link status indication
|
||||
* Add user configuration of HLW8012 and HJL-01/BL0937 Energy Monitoring as used in Sonoff Pow and many Tuya based devices
|
||||
* Add user configuration of MCP39F501 Energy Monitoring as used in Shelly2
|
||||
* Add online template configuration using both commands and Configure Template menu option in GUI
|
||||
* Add (S)SerialSend3 escape sequence \x to allow hexadecimal byte value (#3560, #4947)
|
||||
* Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (#4738)
|
||||
* Add button control when no relay configured (#4682)
|
||||
* Add startup delay of 4 seconds to button control (#4829)
|
||||
* Add core version conditional compile options to provided PWM files (#4917)
|
||||
* Add resiliency to saved Settings (#5065)
|
||||
* Add MHZ19 Temperature as Domoticz Temperature selection (#5128)
|
||||
* Add HAss status sensor (#5139)
|
||||
* Add status message to former declined group commands (#5145)
|
||||
* Add 0x to IRRemote (SetOption29) and RCSwitch (SetOption28) received hexadecimal data (#5431)
|
||||
*
|
||||
* 6.4.1 20181224
|
||||
* Change RAM usage BMP/BME I2C sensors
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user