Add support for Seven Segment display

Add support for Seven Segment display using HT16K33 (#8116)

RELEASENOTES.md

@@ -77,6 +77,7 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
 - Add command ``DevGroupSend`` to send an update to a Device Group (#8093)
 - Add support for unreachable (unplugged) Zigbee devices in Philips Hue emulation and Alexa
 - Add support for 64x48 SSD1306 OLED (#6740)
+- Add support for Seven Segment display using HT16K33 (#8116)
 - Add support for up to four MQTT GroupTopics (#8014)
 - Add support for longer template names
 - Add support for an iAQ sensor (#8107)

tasmota/CHANGELOG.md

@@ -22,6 +22,7 @@
 - Add quick wifi reconnect using saved AP parameters when ``SetOption56 0`` (#3189)
 - Add more accuracy to GPS NTP server (#8088)
 - Add support for an iAQ sensor (#8107)
+- Add support for Seven Segment display using HT16K33 (#8116)
 
 ### 8.2.0.2 20200328
 

tasmota/support_features.ino

@@ -545,8 +545,9 @@ void GetFeatures(void)
 #ifdef USE_IAQ
   feature6 |= 0x00000010;  // xsns_66_iAQ.ino
 #endif
-
-//  feature6 |= 0x00000020;
+#ifdef USE_DISPLAY_SEVENSEG
+  feature6 |= 0x00000020;  // xdsp_11_sevenseg.ino
+#endif
 //  feature6 |= 0x00000040;
 //  feature6 |= 0x00000080;
 

tasmota/tasmota_configurations.h

@@ -262,6 +262,7 @@
     #define USE_DISPLAY_LCD                      // [DisplayModel 1] Enable Lcd display (I2C addresses 0x27 and 0x3F) (+6k code)
     #define USE_DISPLAY_SSD1306                  // [DisplayModel 2] Enable SSD1306 Oled 128x64 display (I2C addresses 0x3C and 0x3D) (+16k code)
     #define USE_DISPLAY_MATRIX                   // [DisplayModel 3] Enable 8x8 Matrix display (I2C adresseses see below) (+11k code)
+    #define USE_DISPLAY_SEVENSEG                 // [DisplayModel 11] [I2cDriver47] Enable sevenseg display (I2C addresses 0x70 - 0x77) (<+11k code)
     #define USE_DISPLAY_SH1106                   // [DisplayModel 7] Enable SH1106 Oled 128x64 display (I2C addresses 0x3C and 0x3D)
 
 #define USE_SPI                                  // Hardware SPI using GPIO12(MISO), GPIO13(MOSI) and GPIO14(CLK) in addition to two user selectable GPIOs(CS and DC)

tasmota/xdsp_11_sevenseg.ino

@@ -301,6 +301,6 @@ bool Xdsp11(uint8_t function)
   return result;
 }
 
-#endif  // USE_DISPLAY_MATRIX
+#endif  // USE_DISPLAY_SEVENSEG
 #endif  // USE_DISPLAY
 #endif  // USE_I2C

tools/decode-status.py

@@ -93,7 +93,7 @@ a_setoption = [[
     "IR Unknown threshold",
     "CSE7766 invalid power margin",
     "Ignore hold time (s)",
-    "(not used) Number of Tuya MCU relays",
+    "Gratuitous ARP repeat time",
     "Over temperature threshold (celsius)",
     "(not used) Tuya MCU max dimmer value",
     "(not used) Tuya MCU voltage Id",
@@ -144,7 +144,9 @@ a_setoption = [[
     "PWM Dimmer Turn red LED on when powered off",
     "PWM Dimmer Buttons control remote devices",
     "Distinct MQTT topics per device for Zigbee",
-    "","","","",
+    "Disable non-json MQTT response",
+    "Enable light fading at start/power on",
+    "","",
     "","","","",
     "","","","",
     "","","","",
@@ -199,7 +201,7 @@ a_features = [[
     "USE_AHT1x","USE_WEMOS_MOTOR_V1","USE_DEVICE_GROUPS","USE_PWM_DIMMER"
     ],[
     "USE_KEELOQ","USE_HRXL","USE_SONOFF_D1","USE_HDC1080",
-    "USE_IAQ","","","",
+    "USE_IAQ","USE_DISPLAY_SEVENSEG","","",
     "","","","",
     "","","","",
     "","","","",