diff --git a/sonoff/language/tr-TR.h b/sonoff/language/tr-TR.h
index 2edf29e78..3d88ae1a8 100755
--- a/sonoff/language/tr-TR.h
+++ b/sonoff/language/tr-TR.h
@@ -256,10 +256,10 @@
 #define D_WEP "WEP"
 #define D_WPA_PSK "WPA PSK"
 #define D_WPA2_PSK "WPA2 PSK"
-#define D_AP1_SSID "AP1 SSId"
-#define D_AP1_PASSWORD "AP1 Password"
+#define D_AP1_SSID "AP1 Adı (SSId)"
+#define D_AP1_PASSWORD "AP1 Parolası"
 #define D_AP2_SSID "AP2 SSId"
-#define D_AP2_PASSWORD "AP2 Password"
+#define D_AP2_PASSWORD "AP2 Parolası"
 
 #define D_MQTT_PARAMETERS "MQTT parametreleri"
 #define D_CLIENT "İstemci"
@@ -318,9 +318,9 @@
 #define D_UPLOAD_ERR_3 "Magic byte is not 0xE9"
 #define D_UPLOAD_ERR_4 "Yazılımın boyutu gerçek boyutundan fazla"
 #define D_UPLOAD_ERR_5 "Upload buffer miscompare"
-#define D_UPLOAD_ERR_6 "Upload failed. Enable logging 3"
-#define D_UPLOAD_ERR_7 "Upload aborted"
-#define D_UPLOAD_ERR_8 "File invalid"
+#define D_UPLOAD_ERR_6 "Yükleme başarısız. Enable logging 3"
+#define D_UPLOAD_ERR_7 "Yükleme iptal edildi"
+#define D_UPLOAD_ERR_8 "Geçersiz dosya"
 #define D_UPLOAD_ERR_9 "File too large"
 #define D_UPLOAD_ERR_10 "Failed to init RF chip"
 #define D_UPLOAD_ERR_11 "Failed to erase RF chip"
@@ -328,7 +328,7 @@
 #define D_UPLOAD_ERR_13 "Failed to decode RF firmware"
 #define D_UPLOAD_ERROR_CODE "Upload error code"
 
-#define D_ENTER_COMMAND "Enter command"
+#define D_ENTER_COMMAND "Komut girişi"
 #define D_ENABLE_WEBLOG_FOR_RESPONSE "Enable weblog 2 if response expected"
 #define D_NEED_USER_AND_PASSWORD "Need user=<username>&password=<password>"
 
@@ -341,9 +341,9 @@
 #define D_CONNECT_FAILED_TO "Connect failed to"
 
 // xplg_wemohue.ino
-#define D_MULTICAST_DISABLED "Multicast disabled"
-#define D_MULTICAST_REJOINED "Multicast (re)joined"
-#define D_MULTICAST_JOIN_FAILED "Multicast join failed"
+#define D_MULTICAST_DISABLED "Multicast kapalı"
+#define D_MULTICAST_REJOINED "Multicast (tekrar)bağlanıldı"
+#define D_MULTICAST_JOIN_FAILED "Multicast bağlantısı başarısız"
 #define D_FAILED_TO_SEND_RESPONSE "Failed to send response"
 
 #define D_WEMO "WeMo"
@@ -354,10 +354,10 @@
 #define D_RESPONSE_SENT "Response sent"
 
 #define D_HUE "Hue"
-#define D_HUE_BRIDGE_SETUP "Hue setup"
-#define D_HUE_API_NOT_IMPLEMENTED "Hue API not implemented"
+#define D_HUE_BRIDGE_SETUP "Hue kurulumu"
+#define D_HUE_API_NOT_IMPLEMENTED "Hue API'si entegre edilmedi"
 #define D_HUE_API "Hue API"
-#define D_HUE_POST_ARGS "Hue POST args"
+#define D_HUE_POST_ARGS "Hue POST argümanları"
 #define D_3_RESPONSE_PACKETS_SENT "3 response packets sent"
 
 // xdrv_07_domoticz.ino
@@ -375,30 +375,30 @@
   #define D_DOMOTICZ_VOLTAGE "Voltage/PM2.5"
   #define D_DOMOTICZ_CURRENT "Current/PM10"
   #define D_DOMOTICZ_AIRQUALITY "AirQuality"
-#define D_DOMOTICZ_UPDATE_TIMER "Update timer"
+#define D_DOMOTICZ_UPDATE_TIMER "Zamanlayıcıyı güncelle"
 
 // xdrv_09_timers.ino
-#define D_CONFIGURE_TIMER "Configure Timer"
-#define D_TIMER_PARAMETERS "Timer parameters"
-#define D_TIMER_ENABLE "Enable Timers"
+#define D_CONFIGURE_TIMER "Zamanlayıcı Ayarları"
+#define D_TIMER_PARAMETERS "Zamanlayıcı Parametreleri"
+#define D_TIMER_ENABLE "Zamanlayıcı Aktif"
 #define D_TIMER_ARM "Arm"
-#define D_TIMER_TIME "Time"
-#define D_TIMER_DAYS "Days"
-#define D_TIMER_REPEAT "Repeat"
+#define D_TIMER_TIME "Zaman"
+#define D_TIMER_DAYS "Gün"
+#define D_TIMER_REPEAT "Tekrar"
 #define D_TIMER_OUTPUT "Output"
 #define D_TIMER_ACTION "Action"
 
 // xdrv_10_knx.ino
-#define D_CONFIGURE_KNX "Configure KNX"
-#define D_KNX_PARAMETERS "KNX Parameters"
-#define D_KNX_GENERAL_CONFIG "General"
-#define D_KNX_PHYSICAL_ADDRESS "Physical Address"
+#define D_CONFIGURE_KNX "KNX Ayarları"
+#define D_KNX_PARAMETERS "KNX Parametreleri"
+#define D_KNX_GENERAL_CONFIG "Genel Ayarlar"
+#define D_KNX_PHYSICAL_ADDRESS "Fiziksel Addres"
 #define D_KNX_PHYSICAL_ADDRESS_NOTE "( Must be unique on the KNX network )"
-#define D_KNX_ENABLE "Enable KNX"
+#define D_KNX_ENABLE "KNX Aktif"
 #define D_KNX_GROUP_ADDRESS_TO_WRITE "Data to Send to Group Addresses"
-#define D_ADD "Add"
-#define D_DELETE "Delete"
-#define D_REPLY "Reply"
+#define D_ADD "Ekle"
+#define D_DELETE "Sil"
+#define D_REPLY "Cevapla"
 #define D_KNX_GROUP_ADDRESS_TO_READ "Group Addresses to Receive Data from"
 #define D_LOG_KNX "KNX: "
 #define D_RECEIVED_FROM "Received from"
@@ -536,4 +536,4 @@
 #define D_LOG_UPNP "UPP: "         // UPnP
 #define D_LOG_WIFI "WIF: "         // Wifi
 
-#endif  // _LANGUAGE_TR_TR_H_
+#endif  // _LANGUAGE_TR_TR_H_
\ No newline at end of file