Merge branch 'development' into new-windmeter-sensor

tasmota/i18n.h

@@ -398,6 +398,7 @@
 #define D_CMND_RGBWWTABLE "RGBWWTable"
 #define D_CMND_ROTATION "Rotation"
 #define D_CMND_SCHEME "Scheme"
+#define D_CMND_SEQUENCE_OFFSET "SequenceOffset"
 #define D_CMND_SPEED "Speed"
 #define D_CMND_WAKEUP "Wakeup"
 #define D_CMND_WAKEUPDURATION "WakeUpDuration"

tasmota/language/bg-BG.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_BG_BG_H_

tasmota/language/cs-CZ.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_CS_CZ_H_

tasmota/language/de-DE.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload Dateien"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "Rauschpegel:"
+#define D_AS3935_ENERGY "Energie:"
+#define D_AS3935_DISTANCE "Entfernung:"
+#define D_AS3935_DISTURBER "Störsingal:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "ca.:"
+#define D_AS3935_AWAY "entfernt"
+#define D_AS3935_LIGHT "Blitz"
+#define D_AS3935_OUT "ausserhalb der Reichweite"
+#define D_AS3935_NOT "Entfernung nicht ermittelbar"
+#define D_AS3935_ABOVE "Blitz überhalb"
+#define D_AS3935_NOISE "Rauschen entdeckt"
+#define D_AS3935_DISTDET "Störer entdeckt"
+#define D_AS3935_INTNOEV "Interrupt ohne Grund!"
+#define D_AS3935_NOMESS "lausche..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "Kalibrierung fehlerhaft"
+#define D_AS3935_CAL_OK "Cap gesetzt auf:"
+
 #endif  // _LANGUAGE_DE_DE_H_

tasmota/language/el-GR.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_EL_GR_H_

tasmota/language/en-GB.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_EN_GB_H_

tasmota/language/es-ES.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Cargar"
 #define D_SCRIPT_UPLOAD_FILES  "Cargar Archivos"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_ES_ES_H_

tasmota/language/fr-FR.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_FR_FR_H_

tasmota/language/he-HE.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_HE_HE_H_

tasmota/language/hu-HU.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_HU_HU_H_

tasmota/language/it-IT.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload file"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_IT_IT_H_

tasmota/language/ko-KO.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_KO_KO_H_

tasmota/language/nl-NL.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_NL_NL_H_

tasmota/language/pl-PL.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_PL_PL_D_H_

tasmota/language/pt-BR.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_PT_BR_H_

tasmota/language/pt-PT.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_PT_PT_H_

tasmota/language/ro-RO.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Încarcă"
 #define D_SCRIPT_UPLOAD_FILES  "Încarcă fișiere"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_RO_RO_H_

tasmota/language/ru-RU.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_RU_RU_H_

tasmota/language/sk-SK.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_SK_SK_H_

tasmota/language/sv-SE.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_SV_SE_H_

tasmota/language/tr-TR.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_TR_TR_H_

tasmota/language/uk-UA.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Завантажити"
 #define D_SCRIPT_UPLOAD_FILES  "Завантажити файли"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif // _LANGUAGE_UK_UA_H_

tasmota/language/zh-CN.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_ZH_CN_H_

tasmota/language/zh-TW.h

@@ -751,4 +751,27 @@
 #define D_SCRIPT_UPLOAD        "Upload"
 #define D_SCRIPT_UPLOAD_FILES  "Upload files"
 
+//xsns_67_as3935.ino
+#define D_AS3935_GAIN "gain:"
+#define D_AS3935_ENERGY "energy:"
+#define D_AS3935_DISTANCE "distance:"
+#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_VRMS "µVrms:"
+#define D_AS3935_APRX "aprx.:"
+#define D_AS3935_AWAY "away"
+#define D_AS3935_LIGHT "lightning"
+#define D_AS3935_OUT "lightning out of range"
+#define D_AS3935_NOT "distance not determined"
+#define D_AS3935_ABOVE "lightning overhead"
+#define D_AS3935_NOISE "noise detected"
+#define D_AS3935_DISTDET "disturber detected"
+#define D_AS3935_INTNOEV "Interrupt with no Event!"
+#define D_AS3935_NOMESS "listening..."
+#define D_AS3935_ON "On"
+#define D_AS3935_OFF "Off"
+#define D_AS3935_INDOORS "Indoors"
+#define D_AS3935_OUTDOORS "Outdoors"
+#define D_AS3935_CAL_FAIL "calibration failed"
+#define D_AS3935_CAL_OK "calibration set to:"
+
 #endif  // _LANGUAGE_ZH_TW_H_

tasmota/my_user_config.h

@@ -426,7 +426,7 @@
   #define DEVICE_GROUPS_PORT 4447                // Device groups multicast port
   #define USE_DEVICE_GROUPS_SEND                 // Add support for the DevGroupSend command (+0k6 code)
 #define USE_PWM_DIMMER                           // Add support for MJ-SD01/acenx/NTONPOWER PWM dimmers (+2k2 code, DGR=0k4)
-  #define USE_PWM_DIMMER_REMOTE                  // Add support for remote switches to PWM Dimmer, also adds device groups support (+0k9 code plus device groups size)
+  #define USE_PWM_DIMMER_REMOTE                  // Add support for remote switches to PWM Dimmer (requires USE_DEVICE_GROUPS) (+0k9 code)
 //#define USE_KEELOQ                               // Add support for Jarolift rollers by Keeloq algorithm (+4k5 code)
 #define USE_SONOFF_D1                            // Add support for Sonoff D1 Dimmer (+0k7 code)
 
@@ -441,6 +441,7 @@
 #define USE_SONOFF_L1                            // Add support for Sonoff L1 led control
 #define USE_ELECTRIQ_MOODL                       // Add support for ElectriQ iQ-wifiMOODL RGBW LED controller (+0k3 code)
 #define USE_LIGHT_PALETTE                        // Add support for color palette (+0k7 code)
+#define USE_DGR_LIGHT_SEQUENCE                   // Add support for device group light sequencing (requires USE_DEVICE_GROUPS) (+0k2 code)
 
 // -- Counter input -------------------------------
 #define USE_COUNTER                              // Enable inputs as counter (+0k8 code)

tasmota/support_device_groups.ino

@@ -350,7 +350,7 @@ void SendReceiveDeviceGroupMessage(struct device_group * device_group, struct de
       else {
         switch (item) {
           case DGR_ITEM_LIGHT_CHANNELS:
-            log_length = snprintf(log_ptr, log_remaining, PSTR("%u,%u,%u,%u,%u"), *message_ptr, *(message_ptr + 1), *(message_ptr + 2), *(message_ptr + 3), *(message_ptr + 4));
+            log_length = snprintf(log_ptr, log_remaining, PSTR("%u,%u,%u,%u,%u,%u"), *message_ptr, *(message_ptr + 1), *(message_ptr + 2), *(message_ptr + 3), *(message_ptr + 4), *(message_ptr + 5));
             break;
         }
       }
@@ -549,7 +549,7 @@ bool _SendDeviceGroupMessage(uint8_t device_group_index, DevGroupMessageType mes
           else {
             switch (item) {
               case DGR_ITEM_LIGHT_CHANNELS:
-                for (int i = 0; i < 5; i++) {
+                for (int i = 0; i < 6; i++) {
                   *out_ptr++ = strtoul((char *)value_ptr, (char **)&value_ptr, 0);
                   if (*value_ptr == ',') value_ptr++;
                 }
@@ -665,7 +665,7 @@ bool _SendDeviceGroupMessage(uint8_t device_group_index, DevGroupMessageType mes
           else {
             switch (item) {
               case DGR_ITEM_LIGHT_CHANNELS:
-                value = 5;
+                value = 6;
                 break;
             }
           }

tasmota/tasmota_globals.h

@@ -114,15 +114,10 @@ extern "C" void resetPins();
 #define MESSZ                       (MQTT_MAX_PACKET_SIZE -TOPSZ -7)  // Max number of characters in JSON message string
 #endif
 
-#ifdef USE_PWM_DIMMER_REMOTE
-#ifdef USE_PWM_DIMMER
 #ifndef USE_DEVICE_GROUPS
-#define USE_DEVICE_GROUPS
-#endif  // USE_DEVICE_GROUPS
-#else   // USE_PWM_DIMMER
 #undef USE_PWM_DIMMER_REMOTE
-#endif  // USE_PWM_DIMMER
+#undef USE_DGR_LIGHT_SEQUENCE
-#endif  // USE_PWM_DIMMER_REMOTE
+#endif  // USE_DEVICE_GROUPS
 
 #ifndef DOMOTICZ_UPDATE_TIMER
 #define DOMOTICZ_UPDATE_TIMER       0          // [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds) (Optional)

tasmota/xdrv_01_webserver.ino

@@ -257,9 +257,10 @@ const char HTTP_SCRIPT_TEMPLATE[] PROGMEM =
     "if(eb('s1').value==''){"
       "eb('s1').value=k;"                 // Set NAME if not yet set
     "}"
-    "os=o.shift();"                       // Complete GPIO sensor list
+    "g=o.shift().split(',');"             // GPIO - Array separator
-    "as=o.shift();"                       // Complete ADC0 list
+    "os=\"";                              // }2'0'>None (0)}3}2'17'>Button1 (17)}3...
-    "g=o.shift().split(',');"             // Array separator
+const char HTTP_SCRIPT_TEMPLATE2[] PROGMEM =
+    "\";"
     "j=0;"
     "for(i=0;i<" STR(MAX_USER_PINS) ";i++){"  // Supports 13 GPIOs
       "if(6==i){j=9;}"
@@ -268,7 +269,9 @@ const char HTTP_SCRIPT_TEMPLATE[] PROGMEM =
       "j++;"
     "}"
     "g=o.shift();"                        // FLAG
-    "os=as;"
+    "os=\"";                              // }2'0'>None (0)}3}2'17'>Analog (17)}3...
+const char HTTP_SCRIPT_TEMPLATE3[] PROGMEM =
+    "\";"
     "sk(g&15," STR(ADC0_PIN) ");"         // Set ADC0
     "g>>=4;"
     "for(i=0;i<" STR(GPIO_FLAG_USED) ";i++){"
@@ -286,20 +289,13 @@ const char HTTP_SCRIPT_TEMPLATE[] PROGMEM =
     "ld(a,x1);"                           // ?t related to WebGetArg("t", stemp, sizeof(stemp));
   "}"
 
-  "function x2(a){"
+  "function sl(){"
-    "os=a.responseText;"
+    "os=\"";                              // }2'0'>Sonoff Basic (1)}3...
+const char HTTP_SCRIPT_TEMPLATE4[] PROGMEM =
+    "\";"
     "sk(" STR(WEMOS_MODULE) ",99);"       // 17 = WEMOS
     "st(" STR(USER_MODULE) ");"
   "}"
-
-#ifdef USE_JAVASCRIPT_ES6
-  "sl=()=>ld('tp?m=1',x2);"               // ?m related to Webserver->hasArg("m")
-#else
-  "function sl(){"
-    "ld('tp?m=1',x2);"                    // ?m related to Webserver->hasArg("m")
-  "}"
-#endif
-
   "wl(sl);";
 
 const char HTTP_SCRIPT_INFO_BEGIN[] PROGMEM =
@@ -1405,16 +1401,6 @@ void HandleTemplateConfiguration(void)
 
   char stemp[30];                                           // Template number and Sensor name
 
-  if (Webserver->hasArg("m")) {
-    WSContentBegin(200, CT_PLAIN);
-    for (uint32_t i = 0; i < sizeof(kModuleNiceList); i++) {  // "}2'%d'>%s (%d)}3" - "}2'0'>Sonoff Basic (1)}3"
-      uint32_t midx = pgm_read_byte(kModuleNiceList + i);
-      WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE, midx, AnyModuleName(midx).c_str(), midx +1);
-    }
-    WSContentEnd();
-    return;
-  }
-
   WebGetArg("t", stemp, sizeof(stemp));                     // 0 - 69 Template number
   if (strlen(stemp)) {
     uint32_t module = atoi(stemp);
@@ -1427,27 +1413,7 @@ void HandleTemplateConfiguration(void)
 
     WSContentBegin(200, CT_PLAIN);
     WSContentSend_P(PSTR("%s}1"), AnyModuleName(module).c_str());  // NAME: Generic
-
+    for (uint32_t i = 0; i < ARRAY_SIZE(cmodule.io); i++) {        // 17,148,29,149,7,255,255,255,138,255,139,255,255
-
-    for (uint32_t i = 0; i < sizeof(kGpioNiceList); i++) {   // GPIO: }2'0'>None (0)}3}2'17'>Button1 (17)}3...
-      if (1 == i) {
-        WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE, 255, D_SENSOR_USER, 255);  // }2'255'>User (255)}3
-      }
-      uint32_t midx = pgm_read_byte(kGpioNiceList + i);
-      WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE, midx, GetTextIndexed(stemp, sizeof(stemp), midx, kSensorNames), midx);
-    }
-    WSContentSend_P(PSTR("}1"));                                   // Field separator
-
-
-    for (uint32_t i = 0; i < ADC0_END; i++) {                // FLAG: }2'0'>None (0)}3}2'17'>Analog (17)}3...
-      if (1 == i) {
-        WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE, ADC0_USER, D_SENSOR_USER, ADC0_USER);  // }2'15'>User (15)}3
-      }
-      WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE, i, GetTextIndexed(stemp, sizeof(stemp), i, kAdc0Names), i);
-    }
-    WSContentSend_P(PSTR("}1"));                                   // Field separator
-
-    for (uint32_t i = 0; i < ARRAY_SIZE(cmodule.io); i++) {         // 17,148,29,149,7,255,255,255,138,255,139,255,255
       if (!FlashPin(i)) {
         WSContentSend_P(PSTR("%s%d"), (i>0)?",":"", cmodule.io[i]);
       }
@@ -1461,7 +1427,29 @@ void HandleTemplateConfiguration(void)
 
   WSContentStart_P(S_CONFIGURE_TEMPLATE);
   WSContentSend_P(HTTP_SCRIPT_MODULE_TEMPLATE);
+
   WSContentSend_P(HTTP_SCRIPT_TEMPLATE);
+  for (uint32_t i = 0; i < sizeof(kGpioNiceList); i++) {   // GPIO: }2'0'>None (0)}3}2'17'>Button1 (17)}3...
+    if (1 == i) {
+      WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE, GPIO_USER, D_SENSOR_USER, GPIO_USER);  // }2'255'>User (255)}3
+    }
+    uint32_t midx = pgm_read_byte(kGpioNiceList + i);
+    WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE, midx, GetTextIndexed(stemp, sizeof(stemp), midx, kSensorNames), midx);
+  }
+  WSContentSend_P(HTTP_SCRIPT_TEMPLATE2);
+  for (uint32_t i = 0; i < ADC0_END; i++) {                // FLAG: }2'0'>None (0)}3}2'17'>Analog (17)}3...
+    if (1 == i) {
+      WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE, ADC0_USER, D_SENSOR_USER, ADC0_USER);  // }2'15'>User (15)}3
+    }
+    WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE, i, GetTextIndexed(stemp, sizeof(stemp), i, kAdc0Names), i);
+  }
+  WSContentSend_P(HTTP_SCRIPT_TEMPLATE3);
+  for (uint32_t i = 0; i < sizeof(kModuleNiceList); i++) {  // "}2'%d'>%s (%d)}3" - "}2'0'>Sonoff Basic (1)}3"
+    uint32_t midx = pgm_read_byte(kModuleNiceList + i);
+    WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE, midx, AnyModuleName(midx).c_str(), midx +1);
+  }
+  WSContentSend_P(HTTP_SCRIPT_TEMPLATE4);
+
   WSContentSendStyle();
   WSContentSend_P(HTTP_FORM_TEMPLATE);
   WSContentSend_P(HTTP_TABLE100);

tasmota/xdrv_04_light.ino

@@ -135,6 +135,9 @@ const char kLightCommands[] PROGMEM = "|"  // No prefix
 #ifdef USE_LIGHT_PALETTE
   "|" D_CMND_PALETTE
 #endif  // USE_LIGHT_PALETTE
+#ifdef USE_DGR_LIGHT_SEQUENCE
+  "|" D_CMND_SEQUENCE_OFFSET
+#endif  // USE_DGR_LIGHT_SEQUENCE
    "|UNDOCA" ;
 
 void (* const LightCommand[])(void) PROGMEM = {
@@ -144,6 +147,9 @@ void (* const LightCommand[])(void) PROGMEM = {
 #ifdef USE_LIGHT_PALETTE
   &CmndPalette,
 #endif  // USE_LIGHT_PALETTE
+#ifdef USE_DGR_LIGHT_SEQUENCE
+  &CmndSequenceOffset,
+#endif  // USE_DGR_LIGHT_SEQUENCE
   &CmndUndocA };
 
 // Light color mode, either RGB alone, or white-CT alone, or both only available if ct_rgb_linked is false
@@ -284,6 +290,10 @@ struct LIGHT {
 #ifdef USE_DEVICE_GROUPS
   uint8_t  last_scheme = 0;
   bool     devgrp_no_channels_out = false; // don't share channels with device group (e.g. if scheme set by other device)
+#ifdef USE_DGR_LIGHT_SEQUENCE
+  uint8_t  sequence_offset = 0;            // number of channel changes this light is behind the master
+  uint8_t * channels_fifo;
+#endif  // USE_DGR_LIGHT_SEQUENCE
 #endif  // USE_DEVICE_GROUPS
 #ifdef USE_LIGHT_PALETTE
   uint8_t  palette_count = 0;            // palette entry count
@@ -2225,16 +2235,22 @@ void calcGammaBulbs(uint16_t cur_col_10[5]) {
 void LightSendDeviceGroupStatus(bool force)
 {
   static uint8_t last_channels[LST_MAX];
+  static uint8_t channels_sequence = 0;
   static uint8_t last_bri;
 
   uint8_t bri = light_state.getBri();
   bool send_bri_update = (force || bri != last_bri);
 
   if (Light.subtype > LST_SINGLE && !Light.devgrp_no_channels_out) {
-    uint8_t channels[LST_MAX];
+    uint8_t channels[LST_MAX + 1];
     light_state.getChannels(channels);
-    if (force || memcmp(last_channels, channels, LST_MAX)) {
+    if (force || memcmp(last_channels, channels, LST_MAX)
+#ifdef USE_LIGHT_PALETTE
+      || (Settings.light_scheme && Light.palette_count)
+#endif  // USE_LIGHT_PALETTE
+      ) {
       memcpy(last_channels, channels, LST_MAX);
+      channels[LST_MAX] = ++channels_sequence;
       SendLocalDeviceGroupMessage((send_bri_update ? DGR_MSGTYP_PARTIAL_UPDATE : DGR_MSGTYP_UPDATE), DGR_ITEM_LIGHT_CHANNELS, channels);
     }
   }
@@ -2285,7 +2301,30 @@ void LightHandleDevGroupItem(void)
       }
       break;
     case DGR_ITEM_LIGHT_CHANNELS:
-      light_controller.changeChannels((uint8_t *)XdrvMailbox.data);
+#ifdef USE_DGR_LIGHT_SEQUENCE
+      {
+        static uint8_t last_sequence = 0;
+
+        // If a sequence offset is set, set the channels to the ones we received <SequenceOffset>
+        // changes ago.
+        if (Light.sequence_offset) {
+          light_controller.changeChannels(Light.channels_fifo);
+
+          // Shift the fifo down and load the newly received channels at the end for this update and
+          // any updates we missed.
+          int last_entry = (Light.sequence_offset - 1) * LST_MAX;
+          for (uint8_t sequence = (uint8_t)XdrvMailbox.data[LST_MAX]; (uint8_t)(sequence - last_sequence) > 0; last_sequence++) {
+            memmove(Light.channels_fifo, &Light.channels_fifo[LST_MAX], last_entry);
+            memcpy(&Light.channels_fifo[last_entry], XdrvMailbox.data, LST_MAX);
+          }
+        }
+        else {
+#endif  // USE_DGR_LIGHT_SEQUENCE
+          light_controller.changeChannels((uint8_t *)XdrvMailbox.data);
+#ifdef USE_DGR_LIGHT_SEQUENCE
+        }
+      }
+#endif  // USE_DGR_LIGHT_SEQUENCE
       send_state = true;
       break;
     case DGR_ITEM_LIGHT_FIXED_COLOR:
@@ -2922,12 +2961,15 @@ void CmndPalette(void)
     for (int entry = 0; entry < Light.palette_count; entry++) {
       if (Settings.flag.decimal_text) {  // SetOption17 - Switch between decimal or hexadecimal output
         *p++ = '"';
+        for (uint32_t i = 0; i < Light.subtype; i++) {
+          p += sprintf_P(p, PSTR("%d,"), *palette_entry++);
+        }
+        *(p - 1) = '"';
       }
-      memcpy(Light.current_color, palette_entry, Light.subtype);
+      else {
-      LightGetColor(p);
+        for (uint32_t i = 0; i < Light.subtype; i++) {
-      p += strlen(p);
+          p += sprintf_P(p, PSTR("%02X"), *palette_entry++);
-      if (Settings.flag.decimal_text) {  // SetOption17 - Switch between decimal or hexadecimal output
+        }
-        *p++ = '"';
       }
       *p++ = ',';
     }
@@ -2939,6 +2981,20 @@ void CmndPalette(void)
 }
 #endif  // USE_LIGHT_PALETTE
 
+#ifdef USE_DGR_LIGHT_SEQUENCE
+void CmndSequenceOffset(void)
+{
+  if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 255)) {
+    if (XdrvMailbox.payload != Light.sequence_offset) {
+      if (Light.sequence_offset) free(Light.channels_fifo);
+      Light.sequence_offset = XdrvMailbox.payload;
+      if (Light.sequence_offset) Light.channels_fifo = (uint8_t *)calloc(Light.sequence_offset, LST_MAX);
+    }
+  }
+  ResponseCmndNumber(Light.sequence_offset);
+}
+#endif  // USE_DGR_LIGHT_SEQUENCE
+
 void CmndUndocA(void)
 {
   // Theos legacy status

tasmota/xsns_27_apds9960.ino

@@ -61,6 +61,8 @@
 #define APDS9930_CHIPID_1         0x12  // we will check, if someone got an incorrect sensor
 #define APDS9930_CHIPID_2         0x39  // there are case reports about "accidentially bought" 9930's
 
+#define APDS9960_GESTURE                // Enable Gesture feature(2k on flash)
+
 /* Gesture parameters */
 #define GESTURE_THRESHOLD_OUT     10
 #define GESTURE_SENSITIVITY_1     50
@@ -72,13 +74,26 @@
 const char APDS9960_TAG[] = "APDS9960";
 
 #ifdef USE_WEBSERVER
-const char HTTP_APDS9960_SNS[] PROGMEM =
+#ifdef APDS9960_GESTURE
-  "{s}" "Red" "{m}%s{e}"
+
-  "{s}" "Green" "{m}%s{e}"
+#define D_GESTURE     "Gesture"
-  "{s}" "Blue" "{m}%s{e}"
+
-  "{s}" "Ambient" "{m}%s " D_UNIT_LUX "{e}"
+const char HTTP_SNS_GESTURE[]     PROGMEM = "{s}%s " D_GESTURE "{m}%s{e}";
-  "{s}" "CCT" "{m}%s " "K"  "{e}"     // calculated color temperature in Kelvin
+
-  "{s}" "Proximity"  "{m}%s{e}";      // {s} = <tr><th>, {m} = </th><td>, {e} = </td></tr>
+#endif  // APDS9960_GESTURE
+
+#define D_COLOR_RED   "Red"
+#define D_COLOR_GREEN "Green"
+#define D_COLOR_BLUE  "Blue"
+#define D_CCT         "CCT"
+#define D_PROXIMITY   "Proximity"
+
+const char HTTP_SNS_COLOR_RED[]   PROGMEM = "{s}%s " D_COLOR_RED "{m}%u{e}";
+const char HTTP_SNS_COLOR_GREEN[] PROGMEM = "{s}%s " D_COLOR_GREEN "{m}%u{e}";
+const char HTTP_SNS_COLOR_BLUE[]  PROGMEM = "{s}%s " D_COLOR_BLUE "{m}%u{e}";
+const char HTTP_SNS_CCT[]         PROGMEM = "{s}%s " D_CCT "{m}%u " "K"  "{e}";
+const char HTTP_SNS_PROXIMITY[]   PROGMEM = "{s}%s " D_PROXIMITY  "{m}%u{e}";
+
 #endif  // USE_WEBSERVER
 
 /*********************************************************************************************\
@@ -236,7 +251,15 @@ const char HTTP_APDS9960_SNS[] PROGMEM =
 
 #define APDS9960_ERROR          0xFF
 
+#ifdef APDS9960_GESTURE
 /* Direction definitions */
+const char GESTURE_UP[]    PROGMEM = "Up";
+const char GESTURE_DOWN[]  PROGMEM = "Down";
+const char GESTURE_LEFT[]  PROGMEM = "Left";
+const char GESTURE_RIGHT[] PROGMEM = "Right";
+const char GESTURE_LONG[]  PROGMEM = "Long";
+const char GESTURE_NONE[]  PROGMEM = "None";
+
 enum {
   DIR_NONE,
   DIR_LEFT,
@@ -249,12 +272,14 @@ enum {
 };
 
 /* State definitions*/
+/*
 enum {
   APDS9960_NA_STATE,
   APDS9960_NEAR_STATE,
   APDS9960_FAR_STATE,
   APDS9960_ALL_STATE
 };
+*/
 
 /* Container for gesture data */
 typedef struct gesture_data_type {
@@ -268,8 +293,7 @@ typedef struct gesture_data_type {
   uint8_t out_threshold;
 } gesture_data_t;
 
-typedef struct gesture_type
+typedef struct gesture_type {
-{
   int16_t ud_delta_ = 0;
   int16_t lr_delta_ = 0;
   int16_t ud_count_ = 0;
@@ -278,6 +302,8 @@ typedef struct gesture_type
   int16_t motion_ = DIR_NONE;
 } gesture_t;
 
+#endif  // APDS9960_GESTURE
+
 typedef struct color_data_type {
   uint16_t a;     // measured ambient
   uint16_t r;     // Red
@@ -289,8 +315,11 @@ typedef struct color_data_type {
 } color_data_t;
 
 /*Members*/
+#ifdef APDS9960_GESTURE
 gesture_data_t gesture_data;
 gesture_t gesture;
+#endif  // APDS9960_GESTURE
+
 color_data_t color_data;
 
 volatile uint8_t recovery_loop_counter = 0;  // count number of stateloops to switch the sensor off, if needed
@@ -721,6 +750,8 @@ void setProxPhotoMask(uint8_t mask) {
   I2cWrite8(APDS9960_I2C_ADDR, APDS9960_CONFIG3, val);
 }
 
+#ifdef APDS9960_GESTURE
+
 /**
  * @brief Gets the entry proximity threshold for gesture sensing
  *
@@ -924,6 +955,8 @@ void setGestureWaitTime(uint8_t time) {
   I2cWrite8(APDS9960_I2C_ADDR, APDS9960_GCONF2, val);
 }
 
+#endif  // APDS9960_GESTURE
+
 /**
  * @brief Gets the low threshold for ambient light interrupts
  *
@@ -1238,6 +1271,8 @@ bool APDS9960_init(void) {
   I2cWrite8(APDS9960_I2C_ADDR, APDS9960_CONFIG3, DEFAULT_CONFIG3);
 
   /* Set default values for gesture sense registers */
+#ifdef APDS9960_GESTURE
+
   setGestureEnterThresh(DEFAULT_GPENTH);
   setGestureExitThresh(DEFAULT_GEXTH);
 
@@ -1256,6 +1291,8 @@ bool APDS9960_init(void) {
 
   setGestureIntEnable(DEFAULT_GIEN);
   
+#endif  // APDS9960_GESTURE
+
   disablePower();  // go to sleep
 
   return true;
@@ -1357,6 +1394,7 @@ void disableProximitySensor(void) {
   setMode(PROXIMITY, OFF);
 }
 
+#ifdef APDS9960_GESTURE
 /**
  * @brief Starts the gesture recognition engine on the APDS-9960
  *
@@ -1451,7 +1489,7 @@ int16_t readGesture(void) {
       fifo_level = I2cRead8(APDS9960_I2C_ADDR, APDS9960_GFLVL);
 
 #ifdef USE_DEBUG_DRIVER
-      AddLog_P2(LOG_LEVEL_DEBUG, PSTR("DRV: FIFO Level :  %d"), fifo_level);
+      AddLog_P2(LOG_LEVEL_DEBUG, PSTR("DRV: FIFO Level : %d"), fifo_level);
 #endif  // USE_DEBUG_DRIVER
 
       /* If there's stuff in the FIFO, read it into our data block */
@@ -1504,6 +1542,8 @@ int16_t readGesture(void) {
   }
 }
 
+#endif  // APDS9960_GESTURE
+
 /**
  * Turn the APDS-9960 on
  *
@@ -1540,6 +1580,8 @@ void readAllColorAndProximityData(void) {
  * High-level gesture controls
 \******************************************************************************/
 
+#ifdef APDS9960_GESTURE
+
 /**
  * @brief Resets all the parameters in the gesture data member
  */
@@ -1705,28 +1747,28 @@ void handleGesture(void) {
   if (isGestureAvailable()) {
     switch (readGesture()) {
       case DIR_UP:
-        AddLog_P(LOG_LEVEL_DEBUG, PSTR("UP"));
+        AddLog_P(LOG_LEVEL_DEBUG, GESTURE_UP);
-        snprintf_P(currentGesture, sizeof(currentGesture), PSTR("Up"));
+        snprintf_P(currentGesture, sizeof(currentGesture), GESTURE_UP);
         break;
       case DIR_DOWN:
-        AddLog_P(LOG_LEVEL_DEBUG, PSTR("DOWN"));
+        AddLog_P(LOG_LEVEL_DEBUG, GESTURE_DOWN);
-        snprintf_P(currentGesture, sizeof(currentGesture), PSTR("Down"));
+        snprintf_P(currentGesture, sizeof(currentGesture), GESTURE_DOWN);
         break;
       case DIR_LEFT:
-        AddLog_P(LOG_LEVEL_DEBUG, PSTR("LEFT"));
+        AddLog_P(LOG_LEVEL_DEBUG, GESTURE_LEFT);
-        snprintf_P(currentGesture, sizeof(currentGesture), PSTR("Left"));
+        snprintf_P(currentGesture, sizeof(currentGesture), GESTURE_LEFT);
         break;
       case DIR_RIGHT:
-        AddLog_P(LOG_LEVEL_DEBUG, PSTR("RIGHT"));
+        AddLog_P(LOG_LEVEL_DEBUG, GESTURE_RIGHT);
-        snprintf_P(currentGesture, sizeof(currentGesture), PSTR("Right"));
+        snprintf_P(currentGesture, sizeof(currentGesture), GESTURE_RIGHT);
         break;
       default:
         if (APDS9960_overload) {
-          AddLog_P(LOG_LEVEL_DEBUG, PSTR("LONG"));
+          AddLog_P(LOG_LEVEL_DEBUG, GESTURE_LONG);
-          snprintf_P(currentGesture, sizeof(currentGesture), PSTR("Long"));
+          snprintf_P(currentGesture, sizeof(currentGesture), GESTURE_LONG);
         } else {
-          AddLog_P(LOG_LEVEL_DEBUG, PSTR("NONE"));
+          AddLog_P(LOG_LEVEL_DEBUG, GESTURE_NONE);
-          snprintf_P(currentGesture, sizeof(currentGesture), PSTR("None"));
+          snprintf_P(currentGesture, sizeof(currentGesture), GESTURE_NONE);
         }
         break;
     }
@@ -1734,6 +1776,8 @@ void handleGesture(void) {
   }
 }
 
+#endif  // APDS9960_GESTURE
+
 void APDS9960_adjustATime(void) {  // not really used atm
   // readAllColorAndProximityData();
   I2cValidRead16LE(&color_data.a, APDS9960_I2C_ADDR, APDS9960_CDATAL);
@@ -1766,6 +1810,8 @@ void APDS9960_adjustATime(void) {  // not really used atm
   delay(20);
 }
 
+#ifdef APDS9960_GESTURE
+
 void APDS9960_loop(void) {
   if (recovery_loop_counter > 0) {
     recovery_loop_counter -= 1;
@@ -1794,6 +1840,8 @@ void APDS9960_loop(void) {
   }
 }
 
+#endif  // APDS9960_GESTURE
+
 void APDS9960_detect(void) {
   if (APDS9960type || I2cActive(APDS9960_I2C_ADDR)) { return; }
 
@@ -1809,7 +1857,9 @@ void APDS9960_detect(void) {
       I2cSetActiveFound(APDS9960_I2C_ADDR, APDS9960_TAG);
 
       enableProximitySensor();
+#ifdef APDS9960_GESTURE
       enableGestureSensor();
+#endif  // APDS9960_GESTURE
     } else {
       APDS9960type = 0;
     }
@@ -1828,41 +1878,48 @@ void APDS9960_show(bool json) {
   if (!APDS9960type) { return; }
 
   if (!gesture_mode && !APDS9960_overload) {
-    char red_chr[10];
+    uint16_t ambient;
-    char green_chr[10];
-    char blue_chr[10];
-    char ambient_chr[10];
-    char cct_chr[10];
-    char prox_chr[10];
 
     readAllColorAndProximityData();
-
+    ambient = color_data.a/4;
-    sprintf(ambient_chr, "%u", color_data.a/4);
-    sprintf(red_chr, "%u", color_data.r);
-    sprintf(green_chr, "%u", color_data.g);
-    sprintf(blue_chr, "%u", color_data.b);
-    sprintf(prox_chr, "%u", color_data.p);
 
     /*  disableLightSensor();
     I2cWrite8(APDS9960_I2C_ADDR, APDS9960_ATIME, DEFAULT_ATIME); // reset to default
     enableLightSensor();*/
 
     calculateColorTemperature();  // and calculate Lux
-    sprintf(cct_chr, "%u", color_data.cct);
-
     if (json) {
-      ResponseAppend_P(PSTR(",\"%s\":{\"Red\":%s,\"Green\":%s,\"Blue\":%s,\"Ambient\":%s,\"CCT\":%s,\"Proximity\":%s}"),
+      ResponseAppend_P(PSTR(",\"%s\":{\"Red\":%u,\"Green\":%u,\"Blue\":%u,\"Ambient\":%u,\"CCT\":%u,\"Proximity\":%u}"),
-        APDS9960_TAG, red_chr, green_chr, blue_chr, ambient_chr, cct_chr, prox_chr);
+        APDS9960_TAG,
+        color_data.r,
+        color_data.g,
+        color_data.b,
+        ambient,
+        color_data.cct,
+        color_data.p);
 #ifdef USE_WEBSERVER
     } else {
-      WSContentSend_PD(HTTP_APDS9960_SNS, red_chr, green_chr, blue_chr, ambient_chr, cct_chr, prox_chr);
+      WSContentSend_PD(HTTP_SNS_COLOR_RED,   APDS9960_TAG, color_data.r);
+      WSContentSend_PD(HTTP_SNS_COLOR_GREEN, APDS9960_TAG, color_data.g);
+      WSContentSend_PD(HTTP_SNS_COLOR_BLUE,  APDS9960_TAG, color_data.b);
+      WSContentSend_PD(HTTP_SNS_ILLUMINANCE, APDS9960_TAG, ambient);
+      WSContentSend_PD(HTTP_SNS_CCT,         APDS9960_TAG, color_data.cct);
+      WSContentSend_PD(HTTP_SNS_PROXIMITY,   APDS9960_TAG, color_data.p);
 #endif  // USE_WEBSERVER
     }
+#ifdef APDS9960_GESTURE
   } else {
-    if (json && (currentGesture[0] != '\0' )) {
+    if (currentGesture[0] != '\0') {
-      ResponseAppend_P(PSTR(",\"%s\":{\"%s\":1}"), APDS9960_TAG, currentGesture);
+      if (json) {
-      currentGesture[0] = '\0';
+        ResponseAppend_P(PSTR(",\"%s\":{\"%s\":1}"), APDS9960_TAG, currentGesture);
+#ifdef USE_WEBSERVER
+      } else {
+        WSContentSend_PD(HTTP_SNS_GESTURE, APDS9960_TAG, currentGesture);
+#endif  // USE_WEBSERVER
+        currentGesture[0] = '\0';
+      }
     }
+#endif  // APDS9960_GESTURE
   }
 }
 
@@ -1882,11 +1939,14 @@ bool APDS9960CommandSensor(void) {
 
   switch (XdrvMailbox.payload) {
     case 0:  // Off
+#ifdef APDS9960_GESTURE
       disableGestureSensor();
+#endif  // APDS9960_GESTURE
       gesture_mode = 0;
       enableLightSensor();
       APDS9960_overload = false;  // prevent unwanted re-enabling
       break;
+#ifdef APDS9960_GESTURE
     case 1:  // On with default gain of 4x
       if (APDS9960type) {
         setGestureGain(DEFAULT_GGAIN);
@@ -1905,6 +1965,7 @@ bool APDS9960CommandSensor(void) {
         gesture_mode = 1;
       }
       break;
+#endif  // APDS9960_GESTURE
     default:
       int temp_aTime = (uint8_t)XdrvMailbox.payload;
       if (temp_aTime > 2 && temp_aTime < 256) {
@@ -1933,9 +1994,11 @@ bool Xsns27(uint8_t function) {
     APDS9960_detect();
   } else if (APDS9960type) {
     switch (function) {
+#ifdef APDS9960_GESTURE
       case FUNC_EVERY_50_MSECOND:
         APDS9960_loop();
         break;
+#endif  // APDS9960_GESTURE
       case FUNC_COMMAND_SENSOR:
         if (XSNS_27 == XdrvMailbox.index) {
           result = APDS9960CommandSensor();

tasmota/xsns_67_as3935.ino

@@ -51,31 +51,7 @@
 #define INDOORS       0x24
 #define OUTDOORS      0x1C
 
-// Translation
+
-// http
-#define D_AS3935_GAIN "gain:"
-#define D_AS3935_ENERGY "energy:"
-#define D_AS3935_DISTANCE "distance:"
-#define D_AS3935_DISTURBER "disturber:"
-#define D_AS3935_VRMS "µVrms:"
-// http Message
-#define D_AS3935_APRX "aprx.:"
-#define D_AS3935_AWAY "away"
-#define D_AS3935_LIGHT "lightning"
-#define D_AS3935_OUT "lightning out of range"
-#define D_AS3935_NOT "distance not determined"
-#define D_AS3935_ABOVE "lightning overhead"
-#define D_AS3935_NOISE "noise detected"
-#define D_AS3935_DISTDET "disturber detected"
-#define D_AS3935_INTNOEV "Interrupt with no Event!"
-#define D_AS3935_NOMESS "listening..."
-// CMD Status
-#define D_AS3935_ON "On"
-#define D_AS3935_OFF "Off"
-#define D_AS3935_INDOORS "Indoors"
-#define D_AS3935_OUTDOORS "Outdoors"
-#define D_AS3935_CAL_FAIL "calibration failed"
-#define D_AS3935_CAL_OK "calibration set to:"
 
 // Global
 const char HTTP_SNS_UNIT_KILOMETER[] PROGMEM = D_UNIT_KILOMETER;