jeans/Tasmota
jeans/Tasmota
1
0
Fork 0
mirror of https://github.com/arendst/Tasmota.git synced 2025-04-24 14:57:16 +00:00
Code Issues Packages Projects Releases Wiki Activity

Update af_AF.h

Browse Source
This commit is contained in:
crispy78 2020-12-27 17:42:33 +01:00 committed by GitHub
parent 08d116bb7b
commit 25d36dbe5a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 47 additions and 47 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

94
tasmota/language/af_AF.h
View File

@ -419,7 +419,7 @@
#define D_DOMOTICZ_ILLUMINANCE "Beligting"
#define D_DOMOTICZ_COUNT "Telling/PM1"
#define D_DOMOTICZ_VOLTAGE "Spanning/PM2.5"
#define D_DOMOTICZ_CURRENT "Krag/PM10"
#define D_DOMOTICZ_CURRENT "Stroom/PM10"
#define D_DOMOTICZ_AIRQUALITY "Lug kwaliteit"
#define D_DOMOTICZ_P1_SMART_METER "P1SmartMeter"
#define D_DOMOTICZ_UPDATE_TIMER "Dateer tydopdatering op"
@ -509,28 +509,28 @@
#define D_SENSORS_FOUND "Sensors gevind"
// xsns_06_dht.ino
#define D_TIMEOUT_WAITING_FOR "Timeout waiting for"
#define D_START_SIGNAL_LOW "start signal low"
#define D_START_SIGNAL_HIGH "start signal high"
#define D_PULSE "pulse"
#define D_CHECKSUM_FAILURE "Checksum failure"
#define D_TIMEOUT_WAITING_FOR "Tyduitstyd wag vir"
#define D_START_SIGNAL_LOW "begin sein laag"
#define D_START_SIGNAL_HIGH "begin sein hoog"
#define D_PULSE "pols"
#define D_CHECKSUM_FAILURE "Checksum het misluk"
// xsns_07_sht1x.ino
#define D_SENSOR_DID_NOT_ACK_COMMAND "Sensor did not ACK command"
#define D_SHT1X_FOUND "SHT1X found"
#define D_SENSOR_DID_NOT_ACK_COMMAND "Sensor het nie ACK opdrag"
#define D_SHT1X_FOUND "SHT1X gevind"
// xsns_18_pms5003.ino
#define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter
#define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter
#define D_PARTICALS_BEYOND "Particles"
#define D_PARTICALS_BEYOND "Deeltjies"
// xsns_27_apds9960.ino
#define D_GESTURE "Gesture"
#define D_COLOR_RED "Red"
#define D_COLOR_GREEN "Green"
#define D_COLOR_BLUE "Blue"
#define D_GESTURE "Gebaar"
#define D_COLOR_RED "Rooi"
#define D_COLOR_GREEN "Groen"
#define D_COLOR_BLUE "Blou"
#define D_CCT "CCT"
#define D_PROXIMITY "Proximity"
#define D_PROXIMITY "Nabyheid"
// xsns_32_mpu6050.ino
#define D_AX_AXIS "Accel. X-Axis"
@ -541,47 +541,47 @@
#define D_GZ_AXIS "Gyro Z-Axis"
// xsns_34_hx711.ino
#define D_HX_CAL_REMOVE "Remove weigth"
#define D_HX_CAL_REFERENCE "Load reference weigth"
#define D_HX_CAL_DONE "Calibrated"
#define D_HX_CAL_FAIL "Calibration failed"
#define D_RESET_HX711 "Reset Scale"
#define D_CONFIGURE_HX711 "Configure Scale"
#define D_HX711_PARAMETERS "Scale parameters"
#define D_ITEM_WEIGHT "Item weight"
#define D_REFERENCE_WEIGHT "Reference weigth"
#define D_CALIBRATE "Calibrate"
#define D_CALIBRATION "Calibration"
#define D_HX_CAL_REMOVE "Verwyder gewig"
#define D_HX_CAL_REFERENCE "Laai verwysingsgewig"
#define D_HX_CAL_DONE "Gekalibreer"
#define D_HX_CAL_FAIL "Kon nie kalibreer nie"
#define D_RESET_HX711 "Stel die skaal terug"
#define D_CONFIGURE_HX711 "Stel skaal op"
#define D_HX711_PARAMETERS "Skaal parameters"
#define D_ITEM_WEIGHT "Gewig van die item"
#define D_REFERENCE_WEIGHT "Verwysingsgewig"
#define D_CALIBRATE "Kalibreer"
#define D_CALIBRATION "Kalibrasie"
//xsns_35_tx20.ino
#define D_TX20_WIND_DIRECTION "Wind Direction"
#define D_TX20_WIND_SPEED "Wind Speed"
#define D_TX20_WIND_SPEED_MIN "Wind Speed Min"
#define D_TX20_WIND_SPEED_MAX "Wind Speed Max"
#define D_TX20_WIND_DIRECTION "Windrigting"
#define D_TX20_WIND_SPEED "Wind spoed"
#define D_TX20_WIND_SPEED_MIN "Wind spoed Min"
#define D_TX20_WIND_SPEED_MAX "Wind spoed Max"
#define D_TX20_NORTH "N"
#define D_TX20_EAST "E"
#define D_TX20_EAST "O"
#define D_TX20_SOUTH "S"
#define D_TX20_WEST "W"
// xsns_53_sml.ino
#define D_TPWRIN "Total-In"
#define D_TPWROUT "Total-Out"
#define D_TPWRCURR "Current-In/Out"
#define D_TPWRCURR1 "Current-In p1"
#define D_TPWRCURR2 "Current-In p2"
#define D_TPWRCURR3 "Current-In p3"
#define D_Strom_L1 "Current L1"
#define D_Strom_L2 "Current L2"
#define D_Strom_L3 "Current L3"
#define D_Spannung_L1 "Voltage L1"
#define D_Spannung_L2 "Voltage L2"
#define D_Spannung_L3 "Voltage L3"
#define D_METERNR "Meter_number"
#define D_TPWRIN "Totaal-In"
#define D_TPWROUT "Totaal-Uit"
#define D_TPWRCURR "Stroom-In/Uit"
#define D_TPWRCURR1 "Stroom-In p1"
#define D_TPWRCURR2 "Stroom-In p2"
#define D_TPWRCURR3 "Stroom-In p3"
#define D_Strom_L1 "Stroom L1"
#define D_Strom_L2 "Stroom L2"
#define D_Strom_L3 "Stroom L3"
#define D_Spannung_L1 "Spanning L1"
#define D_Spannung_L2 "Spanning L2"
#define D_Spannung_L3 "Spanning L3"
#define D_METERNR "Meter nommmer"
#define D_METERSID "Service ID"
#define D_GasIN "Counter" // Gas-Verbrauch
#define D_H2oIN "Counter" // H2o-Verbrauch
#define D_StL1L2L3 "Current L1+L2+L3"
#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
#define D_GasIN "Teller" // Gas-Verbrauch
#define D_H2oIN "Teller" // H2o-Verbrauch
#define D_StL1L2L3 "Stroom L1+L2+L3"
#define D_SpL1L2L3 "Spanning L1+L2+L3/3"
// tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
#define D_SENSOR_NONE "None"