diff --git a/CHANGELOG.md b/CHANGELOG.md
index 1585e77bc..e5d029c5f 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -19,6 +19,7 @@ All notable changes to this project will be documented in this file.
 - HLK-LD2410 Engineering mode (#21880)
 - Support for HLK-LD2410S 24GHz smart wave motion sensor (#22253)
 - Mitsubishi Electric HVAC Auto Clear Remote Temp for MiElHVAC (#22370)
+- Command ``SetOption161 1`` to disable web page slider updates by commands
 
 ### Breaking Changed
 
diff --git a/RELEASENOTES.md b/RELEASENOTES.md
index 8ec8e9821..5e6daf8d1 100644
--- a/RELEASENOTES.md
+++ b/RELEASENOTES.md
@@ -116,6 +116,7 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm
 
 ## Changelog v14.3.0.2
 ### Added
+- Command ``SetOption161 1`` to disable web page slider updates by commands
 - DALI support for short addresses (gear) and groups
 - DALI command `DaliGear` to set max found gear to speed up scan response
 - DALI command `DaliGroup` to add gear to groups
diff --git a/tasmota/include/tasmota_types.h b/tasmota/include/tasmota_types.h
index a7a6dabc1..41b3a03fb 100644
--- a/tasmota/include/tasmota_types.h
+++ b/tasmota/include/tasmota_types.h
@@ -195,7 +195,7 @@ typedef union {                            // Restricted by MISRA-C Rule 18.4 bu
     uint32_t mqtt_disable_modbus : 1;      // bit 12 (v13.3.0.5) - SetOption158 - (MQTT) Disable publish ModbusReceived MQTT messages (1), you must use event trigger rules instead
     uint32_t counter_both_edges : 1;       // bit 13 (v13.3.0.5) - SetOption159 - (Counter) Enable counting on both rising and falling edge (1)
     uint32_t ld2410_use_pin : 1;           // bit 14 (v14.3.0.2) - SetOption160 - (LD2410) Disable generate moving event by sensor report - use LD2410 out pin for events (1)
-    uint32_t spare15 : 1;                  // bit 15
+    uint32_t disable_slider_updates : 1;   // bit 15 (v14.3.0.2) - SetOption161 - (Light) Disable slider updates (1)
     uint32_t spare16 : 1;                  // bit 16
     uint32_t spare17 : 1;                  // bit 17
     uint32_t spare18 : 1;                  // bit 18
diff --git a/tasmota/tasmota_xdrv_driver/xdrv_01_9_webserver.ino b/tasmota/tasmota_xdrv_driver/xdrv_01_9_webserver.ino
index b9837b786..0382e78a3 100644
--- a/tasmota/tasmota_xdrv_driver/xdrv_01_9_webserver.ino
+++ b/tasmota/tasmota_xdrv_driver/xdrv_01_9_webserver.ino
@@ -459,6 +459,7 @@ ESP8266WebServer *Webserver;
 struct WEB {
   String chunk_buffer = "";                         // Could be max 2 * CHUNKED_BUFFER_SIZE
   uint32_t upload_size = 0;
+  int slider[LST_MAX];
   uint16_t upload_error = 0;
   uint8_t state = HTTP_OFF;
   uint8_t upload_file_type;
@@ -595,6 +596,11 @@ void StartWebserver(int type)
 {
   if (!Settings->web_refresh) { Settings->web_refresh = HTTP_REFRESH_TIME; }
   if (!Web.state) {
+
+    for (uint32_t i = 0; i < LST_MAX; i++) {
+      Web.slider[i] = -1;
+    }
+
     if (!Webserver) {
       Webserver = new ESP8266WebServer((HTTP_MANAGER == type || HTTP_MANAGER_RESET_ONLY == type) ? 80 : WEB_PORT);
 
@@ -1152,14 +1158,14 @@ uint32_t WebDeviceColumns(void) {
 }
 
 #ifdef USE_LIGHT
-void WebSliderColdWarm(void)
-{
+void WebSliderColdWarm(void) {
+  Web.slider[0] = LightGetColorTemp();
   WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT,  // Cold Warm
     PSTR("a"),             // a - Unique HTML id
     PSTR("#eff"), PSTR("#f81"),  // 6500k in RGB (White) to 2500k in RGB (Warm Yellow)
-    1,               // sl1
+    1,               // sl1 - used for slider updates
     153, 500,        // Range color temperature
-    LightGetColorTemp(),
+    Web.slider[0],
     't', 0);         // t0 - Value id releated to lc("t0", value) and WebGetArg("t0", tmp, sizeof(tmp));
 }
 #endif  // USE_LIGHT
@@ -1226,12 +1232,13 @@ void HandleRoot(void)
           uint8_t sat;
           LightGetHSB(&hue, &sat, nullptr);
 
+          Web.slider[1] = hue;
           WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT,  // Hue
             PSTR("b"),             // b - Unique HTML id
             PSTR("#800"), PSTR("#f00 5%,#ff0 20%,#0f0 35%,#0ff 50%,#00f 65%,#f0f 80%,#f00 95%,#800"),  // Hue colors
-            2,               // sl2 - Unique range HTML id - Used as source for Saturation end color
+            2,               // sl2 - Unique range HTML id - Used as source for Saturation end color and slider updates
             0, 359,          // Range valid Hue
-            hue,
+            Web.slider[1],
             'h', 0);         // h0 - Value id
 
           uint8_t dcolor = changeUIntScale(Settings->light_dimmer, 0, 100, 0, 255);
@@ -1241,33 +1248,36 @@ void HandleRoot(void)
           HsToRgb(hue, 255, &red, &green, &blue);
           snprintf_P(stemp, sizeof(stemp), PSTR("#%02X%02X%02X"), red, green, blue);  // Saturation end color
 
+          Web.slider[2] = changeUIntScale(sat, 0, 255, 0, 100);
           WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT,  // Saturation
             PSTR("s"),             // s - Unique HTML id related to eb('s').style.background='linear-gradient(to right,rgb('+sl+'%%,'+sl+'%%,'+sl+'%%),hsl('+eb('sl2').value+',100%%,50%%))';
             scolor, stemp,   // Brightness to max current color
-            3,               // sl3 - Unique range HTML id - Not used
+            3,               // sl3 - Unique range HTML id - Used for slider updates
             0, 100,          // Range 0 to 100%
-            changeUIntScale(sat, 0, 255, 0, 100),
+            Web.slider[2],
             'n', 0);         // n0 - Value id
         }
 
+        Web.slider[3] = Settings->light_dimmer;
         WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT,  // Brightness - Black to White
           PSTR("c"),               // c - Unique HTML id
           PSTR("#000"), PSTR("#fff"),    // Black to White
-          4,                 // sl4 - Unique range HTML id - Used as source for Saturation begin color
+          4,                 // sl4 - Unique range HTML id - Used as source for Saturation begin color and slider updates
           Settings->flag3.slider_dimmer_stay_on, 100,  // Range 0/1 to 100% (SetOption77 - Do not power off if slider moved to far left)
-          Settings->light_dimmer,
+          Web.slider[3],
           'd', 0);           // d0 - Value id is related to lc("d0", value) and WebGetArg("d0", tmp, sizeof(tmp));
 
         if (split_white) {   // SetOption37 128
           if (LST_RGBCW == light_subtype) {
             WebSliderColdWarm();
           }
+          Web.slider[4] = LightGetDimmer(2);
           WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT,  // White brightness - Black to White
             PSTR("f"),             // f - Unique HTML id
             PSTR("#000"), PSTR("#fff"),  // Black to White
-            5,               // sl5 - Unique range HTML id - Not used
+            5,               // sl5 - Unique range HTML id - Used for slider updates
             Settings->flag3.slider_dimmer_stay_on, 100,  // Range 0/1 to 100% (SetOption77 - Do not power off if slider moved to far left)
-            LightGetDimmer(2),
+            Web.slider[4],
             'w', 0);         // w0 - Value id is related to lc("w0", value) and WebGetArg("w0", tmp, sizeof(tmp));
         }
       } else {  // Settings->flag3.pwm_multi_channels - SetOption68 1 - Enable multi-channels PWM instead of Color PWM
@@ -1276,12 +1286,13 @@ void HandleRoot(void)
         for (uint32_t i = 0; i < pwm_channels; i++) {
           stemp[1]++;        // e1 to e5 - Make unique ids
 
+          Web.slider[i] = changeUIntScale(Settings->light_color[i], 0, 255, 0, 100);
           WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT,  // Channel brightness - Black to White
             stemp,           // e1 to e5 - Unique HTML id
             PSTR("#000"), PSTR("#fff"),  // Black to White
-            i+1,             // sl1 to sl5 - Unique range HTML id - Not used
+            i+1,             // sl1 to sl5 - Unique range HTML id - Used for slider updates
             1, 100,          // Range 1 to 100%
-            changeUIntScale(Settings->light_color[i], 0, 255, 0, 100),
+            Web.slider[i],
             'e', i+1);       // e1 to e5 - Value id
         }
       }  // Settings->flag3.pwm_multi_channels
@@ -1493,6 +1504,43 @@ bool HandleRootStatusRefresh(void)
   WSContentBegin(200, CT_HTML);
 #endif  // USE_WEB_SSE
 
+#ifdef USE_LIGHT
+  if (!Settings->flag6.disable_slider_updates) {    // SetOption161 0 - (Light) Disable slider updates (1)
+    uint16_t hue;
+    uint8_t sat;
+    int current_value = -1;
+    for (uint32_t i = 0; i < LST_MAX; i++) {
+      if (Web.slider[i] != -1) {
+        if (!Settings->flag3.pwm_multi_channels) {  // SetOption68 0 - Enable multi-channels PWM instead of Color PWM
+          if (0 == i) {
+            current_value = LightGetColorTemp();
+          }
+          else if (1 == i) {
+            LightGetHSB(&hue, &sat, nullptr);
+            current_value = hue;
+          }
+          else if (2 == i) {
+            current_value = changeUIntScale(sat, 0, 255, 0, 100);
+          }
+          else if (3 == i) {
+            current_value = Settings->light_dimmer;
+          }
+          else if (4 == i) {
+            current_value = LightGetDimmer(2);
+          }
+        } else {
+          current_value = changeUIntScale(Settings->light_color[i], 0, 255, 0, 100);
+        }
+        if (current_value != Web.slider[i]) {
+          Web.slider[i] = current_value;
+          // https://stackoverflow.com/questions/4057236/how-to-add-onload-event-to-a-div-element
+          WSContentSend_P(PSTR("<img style='display:none;' src onerror=\"eb('sl%d').value='%d';\">"), i +1, current_value);
+        }
+      }
+    }
+  }
+#endif  // USE_LIGHT
+
   WSContentSend_P(PSTR("{t}"));        // <table style='width:100%'>
   WSContentSeparator(3);               // Reset seperator to ignore previous outputs 
   if (Settings->web_time_end) {
diff --git a/tools/decode-status.py b/tools/decode-status.py
index 87d71125b..116c09a95 100755
--- a/tools/decode-status.py
+++ b/tools/decode-status.py
@@ -216,7 +216,7 @@ a_setoption = [[
     "(MQTT) Disable publish ModbusReceived MQTT messages (1), you must use event trigger rules instead",
     "(Counter) Enable counting on both rising and falling edge (1)",
     "(LD2410) Disable generate moving event by sensor report - use LD2410 out pin for events (1)",
-    "",
+    "(Light) Disable slider updates by commands (1)",
     "","","","",
     "","","","",
     "","","","",