Shrinked tasmota-minimal.bin by 34k

ESP8266 Shrinked tasmota-minimal.bin by removing all commands except ``Upgrade``, ``Upload``, ``OtaUrl``, ``Seriallog``, ``Weblog`` and ``Restart``

CHANGELOG.md

@@ -16,6 +16,7 @@ All notable changes to this project will be documented in this file.
 - NeoPool remove ambiguous device color names
 - Display of energy values in GUI use columns when define ``USE_ENERGY_COLUMN_GUI`` is enabled (default)
 - IRremoteESP8266 library from v2.8.1 to v2.8.2
+- ESP8266 Shrinked tasmota-minimal.bin by removing all commands except ``Upgrade``, ``Upload``, ``OtaUrl``, ``Seriallog``, ``Weblog`` and ``Restart``
 
 ### Fixed
 - NeoPool NPBit and NPRead/NPReadL output

RELEASENOTES.md

@@ -135,6 +135,7 @@ The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmo
 - Removed command ``Sensor33`` and replaced by ``RtcNtpserver``
 - DS3231 I2C address define ``USE_RTC_ADDR`` into ``DS3231_ADDRESS``
 - Display of energy values in GUI use columns when define ``USE_ENERGY_COLUMN_GUI`` is enabled (default)
+- ESP8266 Shrinked tasmota-minimal.bin by removing all commands except ``Upgrade``, ``Upload``, ``OtaUrl``, ``Seriallog``, ``Weblog`` and ``Restart``
 - ESP32 Arduino core from v2.0.2.2 to v2.0.2.3
 - ESP32 LVGL library from v8.1.0 to v8.2.0
 - ESP32 NimBLE library from v1.3.3 to v1.3.6

tasmota/support_command.ino

@@ -21,8 +21,10 @@ const char kTasmotaCommands[] PROGMEM = "|"  // No prefix
   // SetOptions synonyms
   D_SO_WIFINOSLEEP "|"
   // Other commands
-  D_CMND_BACKLOG "|" D_CMND_DELAY "|" D_CMND_POWER "|" D_CMND_STATUS "|" D_CMND_STATE "|" D_CMND_SLEEP "|" D_CMND_UPGRADE "|" D_CMND_UPLOAD "|" D_CMND_OTAURL "|"
-  D_CMND_SERIALLOG "|" D_CMND_RESTART "|" D_CMND_POWERONSTATE "|" D_CMND_PULSETIME "|" D_CMND_BLINKTIME "|" D_CMND_BLINKCOUNT "|" D_CMND_SAVEDATA "|"
+  D_CMND_UPGRADE "|" D_CMND_UPLOAD "|" D_CMND_OTAURL "|" D_CMND_SERIALLOG "|" D_CMND_RESTART "|" 
+#ifndef FIRMWARE_MINIMAL
+  D_CMND_BACKLOG "|" D_CMND_DELAY "|" D_CMND_POWER "|" D_CMND_STATUS "|" D_CMND_STATE "|" D_CMND_SLEEP "|" 
+  D_CMND_POWERONSTATE "|" D_CMND_PULSETIME "|" D_CMND_BLINKTIME "|" D_CMND_BLINKCOUNT "|" D_CMND_SAVEDATA "|"
   D_CMND_SO "|" D_CMND_SETOPTION "|" D_CMND_TEMPERATURE_RESOLUTION "|" D_CMND_HUMIDITY_RESOLUTION "|" D_CMND_PRESSURE_RESOLUTION "|" D_CMND_POWER_RESOLUTION "|"
   D_CMND_VOLTAGE_RESOLUTION "|" D_CMND_FREQUENCY_RESOLUTION "|" D_CMND_CURRENT_RESOLUTION "|" D_CMND_ENERGY_RESOLUTION "|" D_CMND_WEIGHT_RESOLUTION "|"
   D_CMND_MODULE "|" D_CMND_MODULES "|" D_CMND_GPIO "|" D_CMND_GPIOS "|" D_CMND_TEMPLATE "|" D_CMND_PWM "|" D_CMND_PWMFREQUENCY "|" D_CMND_PWMRANGE "|"
@@ -46,6 +48,7 @@ const char kTasmotaCommands[] PROGMEM = "|"  // No prefix
 #ifdef ESP32
    "|Info|" D_CMND_TOUCH_CAL "|" D_CMND_TOUCH_THRES "|" D_CMND_TOUCH_NUM "|" D_CMND_CPU_FREQUENCY
 #endif  // ESP32
+#endif   //FIRMWARE_MINIMAL
   ;
 
 SO_SYNONYMS(kTasmotaSynonyms,
@@ -53,8 +56,10 @@ SO_SYNONYMS(kTasmotaSynonyms,
 );
 
 void (* const TasmotaCommand[])(void) PROGMEM = {
-  &CmndBacklog, &CmndDelay, &CmndPower, &CmndStatus, &CmndState, &CmndSleep, &CmndUpgrade, &CmndUpgrade, &CmndOtaUrl,
-  &CmndSeriallog, &CmndRestart, &CmndPowerOnState, &CmndPulsetime, &CmndBlinktime, &CmndBlinkcount, &CmndSavedata,
+  &CmndUpgrade, &CmndUpgrade, &CmndOtaUrl, &CmndSeriallog, &CmndRestart, 
+#ifndef FIRMWARE_MINIMAL
+  &CmndBacklog, &CmndDelay, &CmndPower, &CmndStatus, &CmndState, &CmndSleep, 
+  &CmndPowerOnState, &CmndPulsetime, &CmndBlinktime, &CmndBlinkcount, &CmndSavedata,
   &CmndSetoption, &CmndSetoption, &CmndTemperatureResolution, &CmndHumidityResolution, &CmndPressureResolution, &CmndPowerResolution,
   &CmndVoltageResolution, &CmndFrequencyResolution, &CmndCurrentResolution, &CmndEnergyResolution, &CmndWeightResolution,
   &CmndModule, &CmndModules, &CmndGpio, &CmndGpios, &CmndTemplate, &CmndPwm, &CmndPwmfrequency, &CmndPwmrange,
@@ -78,6 +83,7 @@ void (* const TasmotaCommand[])(void) PROGMEM = {
 #ifdef ESP32
   , &CmndInfo, &CmndTouchCal, &CmndTouchThres, &CmndTouchNum, &CmndCpuFrequency
 #endif  // ESP32
+#endif   //FIRMWARE_MINIMAL
   };
 
 const char kWifiConfig[] PROGMEM =

tasmota/xdrv_01_webserver.ino

@@ -3300,6 +3300,8 @@ const char kWebCmndStatus[] PROGMEM = D_JSON_DONE "|" D_JSON_WRONG_PARAMETERS "|
 ;
 
 const char kWebCommands[] PROGMEM = "|"  // No prefix
+  D_CMND_WEBLOG "|"
+#ifndef FIRMWARE_MINIMAL
   D_CMND_WEBTIME "|"
 #ifdef USE_EMULATION
   D_CMND_EMULATION "|"
@@ -3307,7 +3309,7 @@ const char kWebCommands[] PROGMEM = "|"  // No prefix
 #if defined(USE_SENDMAIL) || defined(USE_ESP32MAIL)
   D_CMND_SENDMAIL "|"
 #endif
-  D_CMND_WEBSERVER "|" D_CMND_WEBPASSWORD "|" D_CMND_WEBLOG "|" D_CMND_WEBREFRESH "|" D_CMND_WEBSEND "|" D_CMND_WEBQUERY "|"
+  D_CMND_WEBSERVER "|" D_CMND_WEBPASSWORD "|" D_CMND_WEBREFRESH "|" D_CMND_WEBSEND "|" D_CMND_WEBQUERY "|"
   D_CMND_WEBCOLOR "|" D_CMND_WEBSENSOR "|" D_CMND_WEBBUTTON
 #ifdef USE_WEBGETCONFIG
   "|" D_CMND_WEBGETCONFIG
@@ -3315,9 +3317,12 @@ const char kWebCommands[] PROGMEM = "|"  // No prefix
 #ifdef USE_CORS
   "|" D_CMND_CORS
 #endif
+#endif  // FIRMWARE_MINIMAL
 ;
 
 void (* const WebCommand[])(void) PROGMEM = {
+  &CmndWeblog,
+#ifndef FIRMWARE_MINIMAL
   &CmndWebTime,
 #ifdef USE_EMULATION
   &CmndEmulation,
@@ -3325,7 +3330,7 @@ void (* const WebCommand[])(void) PROGMEM = {
 #if defined(USE_SENDMAIL) || defined(USE_ESP32MAIL)
   &CmndSendmail,
 #endif
-  &CmndWebServer, &CmndWebPassword, &CmndWeblog, &CmndWebRefresh, &CmndWebSend, &CmndWebQuery,
+  &CmndWebServer, &CmndWebPassword, &CmndWebRefresh, &CmndWebSend, &CmndWebQuery,
   &CmndWebColor, &CmndWebSensor, &CmndWebButton
 #ifdef USE_WEBGETCONFIG
   , &CmndWebGetConfig
@@ -3333,6 +3338,7 @@ void (* const WebCommand[])(void) PROGMEM = {
 #ifdef USE_CORS
   , &CmndCors
 #endif
+#endif  // FIRMWARE_MINIMAL
   };
 
 /*********************************************************************************************\

tasmota/xdrv_02_9_mqtt.ino

@@ -45,6 +45,7 @@ WiFiClient EspClient;                     // Wifi Client - non-TLS
 #endif  // USE_MQTT_AZURE_IOT
 
 const char kMqttCommands[] PROGMEM = "|"  // No prefix
+#ifndef FIRMWARE_MINIMAL
   // SetOption synonyms
   D_SO_MQTTJSONONLY "|"
 #ifdef USE_MQTT_TLS
@@ -65,7 +66,9 @@ const char kMqttCommands[] PROGMEM = "|"  // No prefix
   D_CMND_MQTTHOST "|" D_CMND_MQTTPORT "|" D_CMND_MQTTRETRY "|" D_CMND_STATETEXT "|" D_CMND_MQTTCLIENT "|"
   D_CMND_FULLTOPIC "|" D_CMND_PREFIX "|" D_CMND_GROUPTOPIC "|" D_CMND_TOPIC "|" D_CMND_PUBLISH "|" D_CMND_MQTTLOG "|"
   D_CMND_BUTTONTOPIC "|" D_CMND_SWITCHTOPIC "|" D_CMND_BUTTONRETAIN "|" D_CMND_SWITCHRETAIN "|" D_CMND_POWERRETAIN "|"
-  D_CMND_SENSORRETAIN "|" D_CMND_INFORETAIN "|" D_CMND_STATERETAIN ;
+  D_CMND_SENSORRETAIN "|" D_CMND_INFORETAIN "|" D_CMND_STATERETAIN
+#endif  // FIRMWARE_MINIMAL
+  ;
 
 SO_SYNONYMS(kMqttSynonyms,
   90,
@@ -76,6 +79,7 @@ SO_SYNONYMS(kMqttSynonyms,
 );
 
 void (* const MqttCommand[])(void) PROGMEM = {
+#ifndef FIRMWARE_MINIMAL
 #if defined(USE_MQTT_TLS)
   &CmndMqttFingerprint,
 #endif
@@ -89,7 +93,9 @@ void (* const MqttCommand[])(void) PROGMEM = {
   &CmndMqttHost, &CmndMqttPort, &CmndMqttRetry, &CmndStateText, &CmndMqttClient,
   &CmndFullTopic, &CmndPrefix, &CmndGroupTopic, &CmndTopic, &CmndPublish, &CmndMqttlog,
   &CmndButtonTopic, &CmndSwitchTopic, &CmndButtonRetain, &CmndSwitchRetain, &CmndPowerRetain, &CmndSensorRetain,
-  &CmndInfoRetain, &CmndStateRetain };
+  &CmndInfoRetain, &CmndStateRetain
+#endif  // FIRMWARE_MINIMAL
+  };
 
 struct MQTT {
   uint16_t connect_count = 0;            // MQTT re-connect count