Add BH1750 resolution control

Add command ``Sensor10 0/1/2`` to control BH1750 resolution - 0 = High (default), 1 = High2, 2 = Low (#8016)

RELEASENOTES.md

@@ -65,6 +65,7 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
 - Add Zigbee command ``ZbBindState`` and ``manuf``attribute
 - Add commands ``CounterDebounceLow`` and ``CounterDebounceHigh`` to control debouncing (#8021)
 - Add command ``SetOption90 1`` to disable non-json MQTT messages (#8044)
+- Add command ``Sensor10 0/1/2`` to control BH1750 resolution - 0 = High (default), 1 = High2, 2 = Low (#8016)
 - Add support for unreachable (unplugged) Zigbee devices in Philips Hue emulation and Alexa
 - Add support for 64x48 SSD1306 OLED (#6740)
 - Add support for up to four MQTT GroupTopics using the same optional Device Group names (#8014)

tasmota/CHANGELOG.md

@@ -9,6 +9,7 @@
 - Add Zigbee command ``ZbBindState`` and ``manuf``attribute
 - Add commands ``CounterDebounceLow`` and ``CounterDebounceHigh`` to control debouncing (#8021)
 - Add command ``SetOption90 1`` to disable non-json MQTT messages (#8044)
+- Add command ``Sensor10 0/1/2`` to control BH1750 resolution - 0 = High (default), 1 = High2, 2 = Low (#8016)
 
 ### 8.2.0.2 20200328
 

tasmota/settings.h

@@ -205,8 +205,7 @@ typedef union {
     uint8_t spare1 : 1;
     uint8_t spare2 : 1;
     uint8_t spare3 : 1;
-    uint8_t spare4 : 1;
-    uint8_t spare5 : 1;
+    uint8_t bh1750_resolution : 2;         // Sensor10 1,2,3
     uint8_t hx711_json_weight_change : 1;  // Sensor34 8,x - Enable JSON message on weight change
     uint8_t mhz19b_abc_disable : 1;        // Disable ABC (Automatic Baseline Correction for MHZ19(B) (0 = Enabled (default), 1 = Disabled with Sensor15 command)
   };

tasmota/xsns_10_bh1750.ino

@@ -31,24 +31,41 @@
 #define BH1750_ADDR1         0x23
 #define BH1750_ADDR2         0x5C
 
-#define BH1750_CONTINUOUS_HIGH_RES_MODE 0x10 // Start measurement at 1lx resolution. Measurement time is approx 120ms.
+#define BH1750_CONTINUOUS_HIGH_RES_MODE2 0x11 // Start measurement at 0.5 lx resolution. Measurement time is approx 120ms.
+#define BH1750_CONTINUOUS_HIGH_RES_MODE  0x10 // Start measurement at 1   lx resolution. Measurement time is approx 120ms.
+#define BH1750_CONTINUOUS_LOW_RES_MODE   0x13 // Start measurement at 4   lx resolution. Measurement time is approx 16ms.
 
-uint8_t bh1750_address;
-uint8_t bh1750_addresses[] = { BH1750_ADDR1, BH1750_ADDR2 };
-uint8_t bh1750_type = 0;
-uint8_t bh1750_valid = 0;
-uint16_t bh1750_illuminance = 0;
-char bh1750_types[] = "BH1750";
+const char kBhMessages[] PROGMEM = "Resolution High|Resolution High2|Resolution Low";
+
+struct BH1750DATA {
+  uint8_t address;
+  uint8_t addresses[2] = { BH1750_ADDR1, BH1750_ADDR2 };
+  uint8_t resolution[3] = { BH1750_CONTINUOUS_HIGH_RES_MODE, BH1750_CONTINUOUS_HIGH_RES_MODE2, BH1750_CONTINUOUS_LOW_RES_MODE };
+  uint8_t type = 0;
+  uint8_t valid = 0;
+  uint16_t illuminance = 0;
+  char types[7] = "BH1750";
+} Bh1750;
+
+/*********************************************************************************************/
+
+bool Bh1750SetResolution(void)
+{
+  Wire.beginTransmission(Bh1750.address);
+  Wire.write(Bh1750.resolution[Settings.SensorBits1.bh1750_resolution]);
+  return (!Wire.endTransmission());
+}
 
 bool Bh1750Read(void)
 {
-  if (bh1750_valid) { bh1750_valid--; }
+  if (Bh1750.valid) { Bh1750.valid--; }
 
-  if (2 != Wire.requestFrom(bh1750_address, (uint8_t)2)) { return false; }
-  uint8_t msb = Wire.read();
-  uint8_t lsb = Wire.read();
-  bh1750_illuminance = ((msb << 8) | lsb) / 1.2;
-  bh1750_valid = SENSOR_MAX_MISS;
+  if (2 != Wire.requestFrom(Bh1750.address, (uint8_t)2)) { return false; }
+  Bh1750.illuminance = (Wire.read() << 8) | Wire.read();
+  if (1 == Settings.SensorBits1.bh1750_resolution) { Bh1750.illuminance >>= 1; }
+  Bh1750.illuminance /= 1.2;
+
+  Bh1750.valid = SENSOR_MAX_MISS;
   return true;
 }
 
@@ -56,14 +73,13 @@ bool Bh1750Read(void)
 
 void Bh1750Detect(void)
 {
-  for (uint32_t i = 0; i < sizeof(bh1750_addresses); i++) {
-    bh1750_address = bh1750_addresses[i];
-    if (I2cActive(bh1750_address)) { continue; }
-    Wire.beginTransmission(bh1750_address);
-    Wire.write(BH1750_CONTINUOUS_HIGH_RES_MODE);
-    if (!Wire.endTransmission()) {
-      I2cSetActiveFound(bh1750_address, bh1750_types);
-      bh1750_type = 1;
+  for (uint32_t i = 0; i < sizeof(Bh1750.addresses); i++) {
+    Bh1750.address = Bh1750.addresses[i];
+    if (I2cActive(Bh1750.address)) { continue; }
+
+    if (Bh1750SetResolution()) {
+      I2cSetActiveFound(Bh1750.address, Bh1750.types);
+      Bh1750.type = 1;
       break;
     }
   }
@@ -73,23 +89,51 @@ void Bh1750EverySecond(void)
 {
   // 1mS
   if (!Bh1750Read()) {
-    AddLogMissed(bh1750_types, bh1750_valid);
+    AddLogMissed(Bh1750.types, Bh1750.valid);
   }
 }
 
+/*********************************************************************************************\
+ * Command Sensor10
+ *
+ * 0    - High resolution mode (default)
+ * 1    - High resolution mode 2
+ * 2    - Low resolution mode
+\*********************************************************************************************/
+
+bool Bh1750CommandSensor(void)
+{
+  uint32_t message_index = Settings.SensorBits1.bh1750_resolution;
+  if (XdrvMailbox.data_len) {
+    switch (XdrvMailbox.payload) {
+      case 0:
+      case 1:
+      case 2:
+        Settings.SensorBits1.bh1750_resolution = XdrvMailbox.payload;
+        Bh1750SetResolution();
+        message_index = Settings.SensorBits1.bh1750_resolution;
+        break;
+    }
+  }
+  char res_text[64];
+  Response_P(S_JSON_SENSOR_INDEX_SVALUE, XSNS_10, GetTextIndexed(res_text, sizeof(res_text), message_index, kBhMessages));
+
+  return true;
+}
+
 void Bh1750Show(bool json)
 {
-  if (bh1750_valid) {
+  if (Bh1750.valid) {
     if (json) {
-      ResponseAppend_P(JSON_SNS_ILLUMINANCE, bh1750_types, bh1750_illuminance);
+      ResponseAppend_P(JSON_SNS_ILLUMINANCE, Bh1750.types, Bh1750.illuminance);
 #ifdef USE_DOMOTICZ
       if (0 == tele_period) {
-        DomoticzSensor(DZ_ILLUMINANCE, bh1750_illuminance);
+        DomoticzSensor(DZ_ILLUMINANCE, Bh1750.illuminance);
       }
 #endif  // USE_DOMOTICZ
 #ifdef USE_WEBSERVER
     } else {
-      WSContentSend_PD(HTTP_SNS_ILLUMINANCE, bh1750_types, bh1750_illuminance);
+      WSContentSend_PD(HTTP_SNS_ILLUMINANCE, Bh1750.types, Bh1750.illuminance);
 #endif  // USE_WEBSERVER
     }
   }
@@ -108,11 +152,16 @@ bool Xsns10(uint8_t function)
   if (FUNC_INIT == function) {
     Bh1750Detect();
   }
-  else if (bh1750_type) {
+  else if (Bh1750.type) {
     switch (function) {
       case FUNC_EVERY_SECOND:
         Bh1750EverySecond();
         break;
+      case FUNC_COMMAND_SENSOR:
+        if (XSNS_10 == XdrvMailbox.index) {
+          result = Bh1750CommandSensor();
+        }
+        break;
       case FUNC_JSON_APPEND:
         Bh1750Show(1);
         break;