diff --git a/eMyloEAI90.txt b/eMyloEAI90.txt
new file mode 100644
index 000000000..aaa208053
--- /dev/null
+++ b/eMyloEAI90.txt
@@ -0,0 +1,5 @@
+Template TuyaMCU(54)
+
+Console:
+Backlog SetOption66 1; TuyaMCU 11,16; TuyaMCU 36,6; TuyaMCU 37,1; SetOption59 1; SetOption72 1
+Rule1 on System#Boot do RuleTimer1 10 endon on Rules#Timer=1 do backlog TuyaSend8; RuleTimer1 10 endon
\ No newline at end of file
diff --git a/platformio.ini b/platformio.ini
index 37cf9a174..2bd850f94 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -80,7 +80,7 @@ build_flags                 = ${core.build_flags}
 
 board_build.f_cpu           = 80000000L
 board_build.f_flash         = 40000000L
-monitor_speed               = 74880
+monitor_speed               = 115200
 monitor_port                = COM5
 upload_speed                = 115200
 ; *** Upload Serial reset method for Wemos and NodeMCU
diff --git a/tasmota/tasmota.h b/tasmota/tasmota.h
index 3191036e3..85784956f 100644
--- a/tasmota/tasmota.h
+++ b/tasmota/tasmota.h
@@ -424,7 +424,7 @@ enum TuyaSupportedFunctions { TUYA_MCU_FUNC_NONE,
                                 TUYA_MCU_FUNC_REL6, TUYA_MCU_FUNC_REL7, TUYA_MCU_FUNC_REL8,
                               TUYA_MCU_FUNC_DIMMER = 21, TUYA_MCU_FUNC_DIMMER2, TUYA_MCU_FUNC_CT, TUYA_MCU_FUNC_RGB, TUYA_MCU_FUNC_WHITE,
                                 TUYA_MCU_FUNC_MODESET, TUYA_MCU_FUNC_REPORT1, TUYA_MCU_FUNC_REPORT2,
-                              TUYA_MCU_FUNC_POWER = 31, TUYA_MCU_FUNC_CURRENT, TUYA_MCU_FUNC_VOLTAGE, TUYA_MCU_FUNC_BATTERY_STATE, TUYA_MCU_FUNC_BATTERY_PERCENTAGE,
+                              TUYA_MCU_FUNC_POWER = 31, TUYA_MCU_FUNC_CURRENT, TUYA_MCU_FUNC_VOLTAGE, TUYA_MCU_FUNC_BATTERY_STATE, TUYA_MCU_FUNC_BATTERY_PERCENTAGE, TUYA_MCU_FUNC_POWER_COMBINED, TUYA_MCU_FUNC_POWER_TOTAL,
                               TUYA_MCU_FUNC_REL1_INV = 41, TUYA_MCU_FUNC_REL2_INV, TUYA_MCU_FUNC_REL3_INV, TUYA_MCU_FUNC_REL4_INV, TUYA_MCU_FUNC_REL5_INV,
                                 TUYA_MCU_FUNC_REL6_INV, TUYA_MCU_FUNC_REL7_INV, TUYA_MCU_FUNC_REL8_INV,
                               TUYA_MCU_FUNC_LOWPOWER_MODE = 51,
diff --git a/tasmota/xdrv_13_display.ino b/tasmota/xdrv_13_display.ino
index fd2c3964d..e9b3c075c 100755
--- a/tasmota/xdrv_13_display.ino
+++ b/tasmota/xdrv_13_display.ino
@@ -89,12 +89,12 @@ enum XdspFunctions { FUNC_DISPLAY_INIT_DRIVER, FUNC_DISPLAY_INIT, FUNC_DISPLAY_E
                      FUNC_DISPLAY_DRAW_CIRCLE, FUNC_DISPLAY_FILL_CIRCLE,
                      FUNC_DISPLAY_DRAW_RECTANGLE, FUNC_DISPLAY_FILL_RECTANGLE,
                      FUNC_DISPLAY_TEXT_SIZE, FUNC_DISPLAY_FONT_SIZE, FUNC_DISPLAY_ROTATION, FUNC_DISPLAY_DRAW_STRING,
-                     FUNC_DISPLAY_DIM, FUNC_DISPLAY_BLINKRATE
+                     FUNC_DISPLAY_DIM, FUNC_DISPLAY_BLINKRATE,
 #ifdef USE_UFILESYS
-                    ,FUNC_DISPLAY_BATCH
+                     FUNC_DISPLAY_BATCH,
 #endif
-                     , FUNC_DISPLAY_NUMBER, FUNC_DISPLAY_FLOAT, FUNC_DISPLAY_NUMBERNC, FUNC_DISPLAY_FLOATNC,
-                     FUNC_DISPLAY_BRIGHTNESS, FUNC_DISPLAY_RAW, FUNC_DISPLAY_LEVEL, FUNC_DISPLAY_SEVENSEG_TEXT, FUNC_DISPLAY_SEVENSEG_TEXTNC,
+                     FUNC_DISPLAY_NUMBER, FUNC_DISPLAY_FLOAT, FUNC_DISPLAY_NUMBERNC, FUNC_DISPLAY_FLOATNC,
+                     FUNC_DISPLAY_RAW, FUNC_DISPLAY_LEVEL, FUNC_DISPLAY_SEVENSEG_TEXT, FUNC_DISPLAY_SEVENSEG_TEXTNC,
                      FUNC_DISPLAY_SCROLLDELAY, FUNC_DISPLAY_CLOCK, FUNC_DISPLAY_SCROLLTEXT
                    };
 
@@ -103,25 +103,25 @@ enum DisplayInitModes { DISPLAY_INIT_MODE, DISPLAY_INIT_PARTIAL, DISPLAY_INIT_FU
 const char kDisplayCommands[] PROGMEM = D_PRFX_DISPLAY "|"  // Prefix
   "|" D_CMND_DISP_MODEL "|" D_CMND_DISP_WIDTH "|" D_CMND_DISP_HEIGHT "|" D_CMND_DISP_MODE "|" D_CMND_DISP_REFRESH "|"
   D_CMND_DISP_DIMMER "|" D_CMND_DISP_COLS "|" D_CMND_DISP_ROWS "|" D_CMND_DISP_SIZE "|" D_CMND_DISP_FONT "|"
-  D_CMND_DISP_ROTATE "|" D_CMND_DISP_TEXT "|" D_CMND_DISP_ADDRESS "|" D_CMND_DISP_BLINKRATE
+  D_CMND_DISP_ROTATE "|" D_CMND_DISP_TEXT "|" D_CMND_DISP_ADDRESS "|" D_CMND_DISP_BLINKRATE "|"
 #ifdef USE_UFILESYS
-  "|" D_CMND_DISP_BATCH
+  D_CMND_DISP_BATCH "|"
 #endif
-   "|" D_CMND_DISP_CLEAR "|" D_CMND_DISP_NUMBER "|" D_CMND_DISP_FLOAT "|" D_CMND_DISP_NUMBERNC "|" D_CMND_DISP_FLOATNC "|"
-  D_CMND_DISP_BRIGHTNESS "|" D_CMND_DISP_RAW "|" D_CMND_DISP_LEVEL "|" D_CMND_DISP_SEVENSEG_TEXT "|" D_CMND_DISP_SEVENSEG_TEXTNC "|"
-  D_CMND_DISP_SCROLLDELAY "|" D_CMND_DISP_CLOCK "|" D_CMND_DISP_TEXTNC "|" 
+  D_CMND_DISP_CLEAR "|" D_CMND_DISP_NUMBER "|" D_CMND_DISP_FLOAT "|" D_CMND_DISP_NUMBERNC "|" D_CMND_DISP_FLOATNC "|"
+  D_CMND_DISP_RAW "|" D_CMND_DISP_LEVEL "|" D_CMND_DISP_SEVENSEG_TEXT "|" D_CMND_DISP_SEVENSEG_TEXTNC "|"
+  D_CMND_DISP_SCROLLDELAY "|" D_CMND_DISP_CLOCK "|" D_CMND_DISP_TEXTNC "|"
   D_CMND_DISP_SCROLLTEXT "|" D_CMND_DISP_ILIMODE "|" D_CMND_DISP_ILIINVERT
   ;
 
 void (* const DisplayCommand[])(void) PROGMEM = {
   &CmndDisplay, &CmndDisplayModel, &CmndDisplayWidth, &CmndDisplayHeight, &CmndDisplayMode, &CmndDisplayRefresh,
   &CmndDisplayDimmer, &CmndDisplayColumns, &CmndDisplayRows, &CmndDisplaySize, &CmndDisplayFont,
-  &CmndDisplayRotate, &CmndDisplayText, &CmndDisplayAddress, &CmndDisplayBlinkrate
+  &CmndDisplayRotate, &CmndDisplayText, &CmndDisplayAddress, &CmndDisplayBlinkrate,
 #ifdef USE_UFILESYS
-  ,&CmndDisplayBatch
+  &CmndDisplayBatch,
 #endif
-  , &CmndDisplayClear, &CmndDisplayNumber, &CmndDisplayFloat, &CmndDisplayNumberNC, &CmndDisplayFloatNC,
-  &CmndDisplayBrightness, &CmndDisplayRaw, &CmndDisplayLevel, &CmndDisplaySevensegText, &CmndDisplaySevensegTextNC,
+  &CmndDisplayClear, &CmndDisplayNumber, &CmndDisplayFloat, &CmndDisplayNumberNC, &CmndDisplayFloatNC,
+  &CmndDisplayRaw, &CmndDisplayLevel, &CmndDisplaySevensegText, &CmndDisplaySevensegTextNC,
   &CmndDisplayScrollDelay, &CmndDisplayClock, &CmndDisplayTextNC,
   &CmndDisplayScrollText, &CmndDisplayILIMOde ,  &CmndDisplayILIInvert
 };
@@ -1643,7 +1643,7 @@ void CmndDisplay(void)
     D_CMND_DISP_MODE "\":%d,\"" D_CMND_DISP_DIMMER "\":%d,\"" D_CMND_DISP_SIZE "\":%d,\"" D_CMND_DISP_FONT "\":%d,\""
     D_CMND_DISP_ROTATE "\":%d,\"" D_CMND_DISP_REFRESH "\":%d,\"" D_CMND_DISP_COLS "\":[%d,%d],\"" D_CMND_DISP_ROWS "\":%d}}"),
     Settings.display_model, Settings.display_width, Settings.display_height,
-    Settings.display_mode, Settings.display_dimmer, Settings.display_size, Settings.display_font,
+    Settings.display_mode, ((Settings.display_dimmer * 666) / 100) +1, Settings.display_size, Settings.display_font,
     Settings.display_rotate, Settings.display_refresh, Settings.display_cols[0], Settings.display_cols[1], Settings.display_rows);
 }
 
@@ -1686,7 +1686,7 @@ void CmndDisplayHeight(void)
 void CmndDisplayMode(void)
 {
 #ifdef USE_DISPLAY_MODES1TO5
-/*     Matrix               LCD / Oled                           TFT
+/*     Matrix / 7-segment   LCD / Oled                           TFT
  * 1 = Text up and time     Time
  * 2 = Date                 Local sensors                        Local sensors
  * 3 = Day                  Local sensors and time               Local sensors and time
@@ -1714,8 +1714,7 @@ void CmndDisplayMode(void)
   ResponseCmndNumber(Settings.display_mode);
 }
 
-void CmndDisplayDimmer(void)
-{
+void CmndDisplayDimmer(void) {
   if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 100)) {
     Settings.display_dimmer = ((XdrvMailbox.payload +1) * 100) / 666;  // Correction for Domoticz (0 - 15)
     if (Settings.display_dimmer && !(disp_power)) {
@@ -1724,12 +1723,13 @@ void CmndDisplayDimmer(void)
     else if (!Settings.display_dimmer && disp_power) {
       ExecuteCommandPower(disp_device, POWER_OFF, SRC_DISPLAY);
     }
-    if (renderer)
+    if (renderer) {
       renderer->dim(Settings.display_dimmer);
-    else
+    } else {
       XdspCall(FUNC_DISPLAY_DIM);
+    }
   }
-  ResponseCmndNumber(Settings.display_dimmer);
+  ResponseCmndNumber(((Settings.display_dimmer * 666) / 100) +1);
 }
 
 void CmndDisplayBlinkrate(void)
@@ -1794,15 +1794,6 @@ void CmndDisplayFloatNC(void)
   ResponseCmndChar(XdrvMailbox.data);
 }
 
-void CmndDisplayBrightness(void)
-{
-  bool result = false;
-  if (!renderer) {
-    result = XdspCall(FUNC_DISPLAY_BRIGHTNESS);
-  }
-  if(result) ResponseCmndNumber(XdrvMailbox.payload);
-}
-
 void CmndDisplayRaw(void)
 {
   if (!renderer) {
diff --git a/tasmota/xdrv_16_tuyamcu.ino b/tasmota/xdrv_16_tuyamcu.ino
index 22eba70f2..476328ef1 100644
--- a/tasmota/xdrv_16_tuyamcu.ino
+++ b/tasmota/xdrv_16_tuyamcu.ino
@@ -386,7 +386,7 @@ inline bool TuyaFuncIdValid(uint8_t fnId) {
   return (fnId >= TUYA_MCU_FUNC_SWT1 && fnId <= TUYA_MCU_FUNC_SWT4) ||
           (fnId >= TUYA_MCU_FUNC_REL1 && fnId <= TUYA_MCU_FUNC_REL8) ||
           (fnId >= TUYA_MCU_FUNC_DIMMER && fnId <= TUYA_MCU_FUNC_REPORT2) ||
-          (fnId >= TUYA_MCU_FUNC_POWER && fnId <= TUYA_MCU_FUNC_BATTERY_PERCENTAGE) ||
+          (fnId >= TUYA_MCU_FUNC_POWER && fnId <= TUYA_MCU_FUNC_POWER_TOTAL) ||
           (fnId >= TUYA_MCU_FUNC_REL1_INV && fnId <= TUYA_MCU_FUNC_REL8_INV) ||
           (fnId >= TUYA_MCU_FUNC_ENUM1 && fnId <= TUYA_MCU_FUNC_ENUM4) ||
           (fnId >= TUYA_MCU_FUNC_MOTOR_DIR && fnId <= TUYA_MCU_FUNC_DUMMY) ||
@@ -697,13 +697,41 @@ void TuyaProcessStatePacket(void) {
   uint8_t fnId;
   uint16_t dpDataLen;
   bool PowerOff = false;
+  bool tuya_energy_enabled = (XNRG_32 == TasmotaGlobal.energy_driver);
 
   while (dpidStart + 4 < Tuya.byte_counter) {
     dpDataLen = Tuya.buffer[dpidStart + 2] << 8 | Tuya.buffer[dpidStart + 3];
     fnId = TuyaGetFuncId(Tuya.buffer[dpidStart]);
 
     AddLog(LOG_LEVEL_DEBUG, PSTR("TYA: fnId=%d is set for dpId=%d"), fnId, Tuya.buffer[dpidStart]);
-      if (Tuya.buffer[dpidStart + 1] == 1) {  // Data Type 1
+    if (Tuya.buffer[dpidStart + 1] == 0) { 
+#ifdef USE_ENERGY_SENSOR
+        if (tuya_energy_enabled && fnId == TUYA_MCU_FUNC_POWER_COMBINED) {
+          if (dpDataLen == 8) {
+            uint16_t tmpVol = Tuya.buffer[dpidStart + 4] << 8 | Tuya.buffer[dpidStart + 5];
+            uint16_t tmpCur = Tuya.buffer[dpidStart + 7] << 8 | Tuya.buffer[dpidStart + 8];
+            uint16_t tmpPow = Tuya.buffer[dpidStart + 10] << 8 | Tuya.buffer[dpidStart + 11];
+          Energy.voltage[0] = (float)tmpVol / 10;
+          Energy.current[0] = (float)tmpCur / 1000;
+          Energy.active_power[0] = (float)tmpPow;
+          AddLog(LOG_LEVEL_DEBUG, PSTR("TYA: Rx ID=%d Voltage=%d"), Tuya.buffer[dpidStart], tmpVol);
+          AddLog(LOG_LEVEL_DEBUG, PSTR("TYA: Rx ID=%d Current=%d"), Tuya.buffer[dpidStart], tmpCur);
+          AddLog(LOG_LEVEL_DEBUG, PSTR("TYA: Rx ID=%d Active_Power=%d"), Tuya.buffer[dpidStart], tmpPow);
+
+          if (RtcTime.valid) {
+            if (Tuya.lastPowerCheckTime != 0 && Energy.active_power[0] > 0) {
+              Energy.kWhtoday += (float)Energy.active_power[0] * (Rtc.utc_time - Tuya.lastPowerCheckTime) / 36;
+              EnergyUpdateToday();
+            }
+            Tuya.lastPowerCheckTime = Rtc.utc_time;
+          }
+        } else {
+          AddLog(LOG_LEVEL_DEBUG, PSTR("TYA: Rx ID=%d INV_LEN=%d"), Tuya.buffer[dpidStart], dpDataLen);
+        }
+        }
+        #endif // USE_ENERGY_SENSOR
+    }
+    else if (Tuya.buffer[dpidStart + 1] == 1) {  // Data Type 1
 
         if (fnId >= TUYA_MCU_FUNC_REL1 && fnId <= TUYA_MCU_FUNC_REL8) {
           AddLog(LOG_LEVEL_DEBUG, PSTR("TYA: RX Relay-%d --> MCU State: %s Current State:%s"), fnId - TUYA_MCU_FUNC_REL1 + 1, Tuya.buffer[dpidStart + 4]?"On":"Off",bitRead(TasmotaGlobal.power, fnId - TUYA_MCU_FUNC_REL1)?"On":"Off");
@@ -728,7 +756,6 @@ void TuyaProcessStatePacket(void) {
         if (PowerOff) { Tuya.ignore_dimmer_cmd_timeout = millis() + 250; }
       }
       else if (Tuya.buffer[dpidStart + 1] == 2) {  // Data Type 2
-        bool tuya_energy_enabled = (XNRG_32 == TasmotaGlobal.energy_driver);
         uint16_t packetValue = Tuya.buffer[dpidStart + 6] << 8 | Tuya.buffer[dpidStart + 7];
         uint8_t dimIndex;
         bool SnsUpdate = false;
@@ -824,6 +851,9 @@ void TuyaProcessStatePacket(void) {
             }
             Tuya.lastPowerCheckTime = Rtc.utc_time;
           }
+        } else if (tuya_energy_enabled && fnId == TUYA_MCU_FUNC_POWER_TOTAL) {
+          EnergyUpdateTotal((float)packetValue / 100,true);
+          AddLog(LOG_LEVEL_DEBUG, PSTR("TYA: Rx ID=%d Total_Power=%d"), Tuya.buffer[dpidStart], packetValue);
         }
   #endif // USE_ENERGY_SENSOR
       }
@@ -862,6 +892,7 @@ void TuyaProcessStatePacket(void) {
             ExecuteCommand(scmnd, SRC_SWITCH);
           }
         }
+        
       }
       else if (Tuya.buffer[dpidStart + 1] == 4) {  // Data Type 4
         const unsigned char *dpData = (unsigned char*)&Tuya.buffer[dpidStart + 4];
@@ -1273,11 +1304,11 @@ bool Xnrg32(uint8_t function)
 
   if (TUYA_DIMMER == TasmotaGlobal.module_type) {
     if (FUNC_PRE_INIT == function) {
-      if (TuyaGetDpId(TUYA_MCU_FUNC_POWER) != 0) {
-        if (TuyaGetDpId(TUYA_MCU_FUNC_CURRENT) == 0) {
+      if (TuyaGetDpId(TUYA_MCU_FUNC_POWER) != 0 || TuyaGetDpId(TUYA_MCU_FUNC_POWER_COMBINED) != 0) {
+        if (TuyaGetDpId(TUYA_MCU_FUNC_CURRENT) == 0 && TuyaGetDpId(TUYA_MCU_FUNC_POWER_COMBINED) == 0) {
           Energy.current_available = false;
         }
-        if (TuyaGetDpId(TUYA_MCU_FUNC_VOLTAGE) == 0) {
+        if (TuyaGetDpId(TUYA_MCU_FUNC_VOLTAGE) == 0 && TuyaGetDpId(TUYA_MCU_FUNC_POWER_COMBINED) == 0) {
           Energy.voltage_available = false;
         }
         TasmotaGlobal.energy_driver = XNRG_32;
diff --git a/tasmota/xdsp_15_tm1637.ino b/tasmota/xdsp_15_tm1637.ino
index 35ef7ab6b..0b507fce5 100644
--- a/tasmota/xdsp_15_tm1637.ino
+++ b/tasmota/xdsp_15_tm1637.ino
@@ -60,57 +60,51 @@
                                Clears the display, command: "DisplayClear"
 
 
-  DisplayNumber         num [,position {0-(TM1637Data.num_digits-1))} [,leading_zeros {0|1} [,length {1 to TM1637Data.num_digits}]]]
+  DisplayNumber         num [,position {0-(Settings.display_width-1))} [,leading_zeros {0|1} [,length {1 to Settings.display_width}]]]
 
                                Clears and then displays number without decimal. command e.g., "DisplayNumber 1234"
                                Control 'leading zeros', 'length' and 'position' with  "DisplayNumber 1234, <position>, <leadingZeros>, <length>"
-                               'leading zeros' can be 1 or 0 (default), 'length' can be 1 to TM1637Data.num_digits, 'position' can be 0 (left-most) to TM1637Data.num_digits (right-most).
+                               'leading zeros' can be 1 or 0 (default), 'length' can be 1 to Settings.display_width, 'position' can be 0 (left-most) to Settings.display_width (right-most).
                                See function description below for more details.
 
-  DisplayNumberNC       num [,position {0-(TM1637Data.num_digits-1))} [,leading_zeros {0|1} [,length {1 to TM1637Data.num_digits}]]]
+  DisplayNumberNC       num [,position {0-(Settings.display_width-1))} [,leading_zeros {0|1} [,length {1 to Settings.display_width}]]]
 
                                Display integer number as above, but without clearing first. e.g., "DisplayNumberNC 1234". Usage is same as above.
 
 
 
-  DisplayFloat          num [,position {0-(TM1637Data.num_digits-1)} [,precision {0-TM1637Data.num_digits} [,length {1 to TM1637Data.num_digits}]]]
+  DisplayFloat          num [,position {0-(Settings.display_width-1)} [,precision {0-Settings.display_width} [,length {1 to Settings.display_width}]]]
 
                                Clears and then displays float (with decimal point)  command e.g., "DisplayFloat 12.34"
                                See function description below for more details.
 
 
 
-  DisplayFloatNC        num [,position {0-(TM1637Data.num_digits-1)} [,precision {0-TM1637Data.num_digits} [,length {1 to TM1637Data.num_digits}]]]
+  DisplayFloatNC        num [,position {0-(Settings.display_width-1)} [,precision {0-Settings.display_width} [,length {1 to Settings.display_width}]]]
 
                                Displays float (with decimal point) as above, but without clearing first. command e.g., "DisplayFloatNC 12.34"
                                See function description below for more details.
 
 
 
-  DisplayBrightness     num {1-8}
+  DisplayRaw            position {0-(Settings.display_width-1)},length {1 to Settings.display_width}, num1 [, num2[, num3[, num4[, ...upto Settings.display_width numbers]]]]]
 
-                               Set brightness (1 to 8) command e.g., "DisplayBrightness 2"
-
-
-
-  DisplayRaw            position {0-(TM1637Data.num_digits-1)},length {1 to TM1637Data.num_digits}, num1 [, num2[, num3[, num4[, ...upto TM1637Data.num_digits numbers]]]]]
-
-                               Takes upto TM1637Data.num_digits comma-separated integers (0-255) and displays raw segments. Each number represents a
+                               Takes upto Settings.display_width comma-separated integers (0-255) and displays raw segments. Each number represents a
                                7-segment digit. Each 8-bit number represents individual segments of a digit.
                                For example, the command "DisplayRaw 0, 4, 255, 255, 255, 255" would display "[8.8.8.8.]"
 
 
 
-  DisplayText           text [, position {0-(TM1637Data.num_digits-1)} [,length {1 to TM1637Data.num_digits}]]
+  DisplayText           text [, position {0-(Settings.display_width-1)} [,length {1 to Settings.display_width}]]
 
                                Clears and then displays basic text.  command e.g., "DisplayText ajith vasudevan"
                                Control 'length' and 'position' with  "DisplayText <text>, <position>, <length>"
-                               'length' can be 1 to TM1637Data.num_digits, 'position' can be 0 (left-most) to TM1637Data.num_digits-1 (right-most)
+                               'length' can be 1 to Settings.display_width, 'position' can be 0 (left-most) to Settings.display_width-1 (right-most)
                                A caret(^) symbol in the text input is dispayed as the degrees(°) symbol. This is useful for displaying Temperature!
                                For example, the command "DisplayText 22.5^" will display "22.5°".
 
 
-  DisplayTextNC         text [, position {0-TM1637Data.num_digits-1} [,length {1 to TM1637Data.num_digits}]]
+  DisplayTextNC         text [, position {0-Settings.display_width-1} [,length {1 to Settings.display_width}]]
 
                                Clears first, then displays text. Usage is same as above.
 
@@ -148,8 +142,6 @@
 
 #define XDSP_15           15
 
-#define BRIGHTNESS_MIN    1
-#define BRIGHTNESS_MAX    8
 #define CMD_MAX_LEN       55
 #define LEVEL_MIN         0
 #define LEVEL_MAX         100
@@ -171,11 +163,9 @@ struct {
   char scroll_text[CMD_MAX_LEN];
   char msg[60];
   char model_name[8];
-  uint8_t num_digits = 4;
   uint8_t scroll_delay = 4;
   uint8_t scroll_index = 0;
   uint8_t iteration = 0;
-  uint8_t brightness = 5;
   uint8_t buttons;
   uint8_t display_type = TM1637;
   uint8_t prev_buttons;
@@ -194,14 +184,12 @@ struct {
 void TM1637Init(void) {
   if (PinUsed(GPIO_TM1638CLK) && PinUsed(GPIO_TM1638DIO) && PinUsed(GPIO_TM1638STB)) {
     TM1637Data.display_type = TM1638;
-    TM1637Data.num_digits = 8;
+    Settings.display_width = 8;
   }
   else if (PinUsed(GPIO_TM1637CLK) && PinUsed(GPIO_TM1637DIO)) {
     TM1637Data.display_type = TM1637;
-    if (Settings.display_cols[0] <= 6) {
-      TM1637Data.num_digits = Settings.display_cols[0];
-    } else {
-      TM1637Data.num_digits = 4;
+    if ((!Settings.display_width || Settings.display_width > 6)) {
+      Settings.display_width = 4;
     }
   }
   else {
@@ -209,30 +197,31 @@ void TM1637Init(void) {
   }
 
   Settings.display_model = XDSP_15;
+  Settings.display_cols[0] = Settings.display_width;
+  Settings.display_height = 1;
+  Settings.display_rows = Settings.display_height;
 
   if (TM1637 == TM1637Data.display_type) {
     strcpy_P(TM1637Data.model_name, PSTR("TM1637"));
     tm1637display = new SevenSegmentTM1637(Pin(GPIO_TM1637CLK), Pin(GPIO_TM1637DIO));
-    tm1637display->begin(TM1637Data.num_digits, 1);
+    tm1637display->begin(Settings.display_width, 1);
   }
   else if (TM1638 == TM1637Data.display_type) {
     strcpy_P(TM1637Data.model_name, PSTR("TM1638"));
     tm1638display = new TM1638plus(Pin(GPIO_TM1638STB), Pin(GPIO_TM1638CLK), Pin(GPIO_TM1638DIO), true );
-    TM1637Data.num_digits = 8;
     tm1638display->displayBegin();
   }
   TM1637ClearDisplay();
-  TM1637Data.brightness = (Settings.display_dimmer ? Settings.display_dimmer : TM1637Data.brightness);
-  TM1637SetBrightness(TM1637Data.brightness);
+  TM1637Dim();
   TM1637Data.init_done = true;
-  AddLog(LOG_LEVEL_INFO, PSTR("DSP: %s with %d digits"), TM1637Data.model_name, TM1637Data.num_digits);
+  AddLog(LOG_LEVEL_INFO, PSTR("DSP: %s with %d digits"), TM1637Data.model_name, Settings.display_width);
 }
 
 /*********************************************************************************************\
 * Displays number without decimal, with/without leading zeros, specifying start-position
 * and length, optionally skipping clearing display before displaying the number.
-* commands: DisplayNumber   num [,position {0-(TM1637Data.num_digits-1)} [,leading_zeros {0|1} [,length {1 to TM1637Data.num_digits}]]]
-*           DisplayNumberNC num [,position {0-(TM1637Data.num_digits-1)} [,leading_zeros {0|1} [,length {1 to TM1637Data.num_digits}]]]    // "NC" --> "No Clear"
+* commands: DisplayNumber   num [,position {0-(Settings.display_width-1)} [,leading_zeros {0|1} [,length {1 to Settings.display_width}]]]
+*           DisplayNumberNC num [,position {0-(Settings.display_width-1)} [,leading_zeros {0|1} [,length {1 to Settings.display_width}]]]    // "NC" --> "No Clear"
 \*********************************************************************************************/
 bool CmndTM1637Number(bool clear) {
   char sNum[CMD_MAX_LEN];
@@ -262,7 +251,7 @@ bool CmndTM1637Number(bool clear) {
   }
 
 
-  if((position < 0) || (position > (TM1637Data.num_digits-1))) position = 0;
+  if((position < 0) || (position > (Settings.display_width-1))) position = 0;
 
   AddLog(LOG_LEVEL_DEBUG, PSTR("TM7: num %d, pos %d, lead %d, len %d"), num, position, leadingzeros, length);
 
@@ -271,20 +260,20 @@ bool CmndTM1637Number(bool clear) {
   char txt[30];
   snprintf_P(txt, sizeof(txt), PSTR("%d"), num);
   if(!length) length = strlen(txt);
-  if((length < 0) || (length > TM1637Data.num_digits)) length = TM1637Data.num_digits;
+  if((length < 0) || (length > Settings.display_width)) length = Settings.display_width;
 
   char pad = (leadingzeros ? '0': ' ');
   uint32_t i = position;
   uint8_t rawBytes[1];
 
   for(; i<position + (length - strlen(txt)); i++) {
-    if(i>TM1637Data.num_digits) break;
+    if(i>Settings.display_width) break;
     if(TM1637Data.display_type == TM1637) { rawBytes[0] = tm1637display->encode(pad); tm1637display->printRaw(rawBytes, 1, i); }
     else if(TM1637Data.display_type == TM1638) tm1638display->displayASCII(i, pad);
   }
 
   for(uint32_t j = 0; i< position + length; i++, j++) {
-    if(i>TM1637Data.num_digits) break;
+    if(i>Settings.display_width) break;
     if(txt[j] == 0) break;
     if(TM1637Data.display_type == TM1637) { rawBytes[0] = tm1637display->encode(txt[j]);  tm1637display->printRaw(rawBytes, 1, i); }
     else if(TM1637Data.display_type == TM1638) tm1638display->displayASCII(i, txt[j]);
@@ -296,8 +285,8 @@ bool CmndTM1637Number(bool clear) {
 /*********************************************************************************************\
 * Displays number with decimal, specifying position, precision and length,
 * optionally skipping clearing display before displaying the number.
-* commands: DisplayFloat   num [,position {0-(TM1637Data.num_digits-1)} [,precision {0-TM1637Data.num_digits} [,length {1 to TM1637Data.num_digits}]]]
-*           DisplayFloatNC num [,position {0-(TM1637Data.num_digits-1)} [,precision {0-TM1637Data.num_digits} [,length {1 to TM1637Data.num_digits}]]]    // "NC" --> "No Clear"
+* commands: DisplayFloat   num [,position {0-(Settings.display_width-1)} [,precision {0-Settings.display_width} [,length {1 to Settings.display_width}]]]
+*           DisplayFloatNC num [,position {0-(Settings.display_width-1)} [,precision {0-Settings.display_width} [,length {1 to Settings.display_width}]]]    // "NC" --> "No Clear"
 \*********************************************************************************************/
 bool CmndTM1637Float(bool clear) {
 
@@ -306,7 +295,7 @@ bool CmndTM1637Float(bool clear) {
   char sPosition[CMD_MAX_LEN];
   char sLength[CMD_MAX_LEN];
   uint8_t length = 0;
-  uint8_t precision = TM1637Data.num_digits;
+  uint8_t precision = Settings.display_width;
   uint8_t position = 0;
 
   float fnum = 0.0f;
@@ -328,8 +317,8 @@ bool CmndTM1637Float(bool clear) {
   }
 
 
-  if((position < 0) || (position > (TM1637Data.num_digits-1))) position = 0;
-  if((precision < 0) || (precision > TM1637Data.num_digits)) precision = TM1637Data.num_digits;
+  if((position < 0) || (position > (Settings.display_width-1))) position = 0;
+  if((precision < 0) || (precision > Settings.display_width)) precision = Settings.display_width;
 
   if(clear) TM1637ClearDisplay();
 
@@ -337,7 +326,7 @@ bool CmndTM1637Float(bool clear) {
   ext_snprintf_P(txt, sizeof(txt), PSTR("%*_f"), precision, &fnum);
 
   if(!length) length = strlen(txt);
-  if((length <= 0) || (length > TM1637Data.num_digits)) length = TM1637Data.num_digits;
+  if((length <= 0) || (length > Settings.display_width)) length = Settings.display_width;
 
   AddLog(LOG_LEVEL_DEBUG, PSTR("TM7: num %4_f, prec %d, len %d"), &fnum, precision, length);
 
@@ -351,7 +340,7 @@ bool CmndTM1637Float(bool clear) {
         i++;
         length++;
       }
-      if((j+position) > TM1637Data.num_digits) break;
+      if((j+position) > Settings.display_width) break;
       tm1637display->printRaw(rawBytes, 1, j+position);
     }
   } else if(TM1637Data.display_type == TM1638) {
@@ -389,9 +378,9 @@ bool CmndTM1637Clear(void) {
 void TM1637ClearDisplay (void) {
   if(TM1637Data.display_type == TM1637) {
     unsigned char arr[] =  {0};
-    for(int i=0; i<TM1637Data.num_digits; i++) tm1637display->printRaw(arr, 1, i);
+    for(int i=0; i<Settings.display_width; i++) tm1637display->printRaw(arr, 1, i);
   } else if(TM1637Data.display_type == TM1638) {
-    for(int i=0; i<TM1637Data.num_digits; i++) tm1638display->display7Seg(i, 0);
+    for(int i=0; i<Settings.display_width; i++) tm1638display->display7Seg(i, 0);
   }
 }
 
@@ -453,7 +442,7 @@ void TM1637ScrollText(void) {
   }
   uint8_t rawBytes[1];
   for(uint32_t i=0, j=TM1637Data.scroll_index; i< 1 + strlen(TM1637Data.scroll_text); i++, j++) {
-    if(i > (TM1637Data.num_digits-1)) { break; }
+    if(i > (Settings.display_width-1)) { break; }
     rawBytes[0] = tm1637display->encode(TM1637Data.scroll_text[j]);
     bool dotSkipped = false;
     if(TM1637Data.scroll_text[j+1] == '.') {
@@ -490,7 +479,7 @@ bool CmndTM1637Level(void) {
     return false;
   }
 
-  uint8_t totalBars = 2*TM1637Data.num_digits;
+  uint8_t totalBars = 2*Settings.display_width;
   AddLog(LOG_LEVEL_DEBUG, PSTR("TM7: TM1637Data.model_name %s CmndTM1637Level totalBars=%d"), TM1637Data.model_name, totalBars);
   float barsToDisplay = totalBars * val / 100.0f;
   char txt[5];
@@ -519,8 +508,8 @@ bool CmndTM1637Level(void) {
 
 /*********************************************************************************************\
 * Display arbitrary data on the display module
-* Command:   DisplayRaw position {0-(TM1637Data.num_digits-1)},length {1 to TM1637Data.num_digits}, a [, b[, c[, d[...upto TM1637Data.num_digits]]]]
-* where a,b,c,d... are upto TM1637Data.num_digits numbers in the range 0-255, each number (byte)
+* Command:   DisplayRaw position {0-(Settings.display_width-1)},length {1 to Settings.display_width}, a [, b[, c[, d[...upto Settings.display_width]]]]
+* where a,b,c,d... are upto Settings.display_width numbers in the range 0-255, each number (byte)
 * corresponding to a single 7-segment digit. Within each byte, bit 0 is segment A,
 * bit 1 is segment B etc. The function may either set the entire display
 * or any desired part using the length and position parameters.
@@ -571,8 +560,8 @@ bool CmndTM1637Raw(void) {
   }
 
   if(!length) length = ArgC() - 2;
-  if(length < 0 || length > TM1637Data.num_digits) length = TM1637Data.num_digits;
-  if(position < 0 || position > (TM1637Data.num_digits-1)) position = 0;
+  if(length < 0 || length > Settings.display_width) length = Settings.display_width;
+  if(position < 0 || position > (Settings.display_width-1)) position = 0;
 
   AddLog(LOG_LEVEL_DEBUG, PSTR("TM7: a %d, b %d, c %d, d %d, e %d, f %d, len %d, pos %d"),
     DATA[0], DATA[1], DATA[2], DATA[3], DATA[4], DATA[5], length, position);
@@ -580,7 +569,7 @@ bool CmndTM1637Raw(void) {
   if(TM1637Data.display_type == TM1637) {
     uint8_t rawBytes[1];
     for(uint32_t i=position; i<position+length; i++ ) {
-      if(i>(TM1637Data.num_digits-1)) break;
+      if(i>(Settings.display_width-1)) break;
       rawBytes[0] = DATA[i-position];
       tm1637display->printRaw(rawBytes, 1, i);
     }
@@ -599,7 +588,7 @@ bool CmndTM1637Raw(void) {
 * Display a given string.
 * Text can be placed at arbitrary location on the display using the length and
 * position parameters without affecting the rest of the display.
-* Command:   DisplayText text [, position {0-(TM1637Data.num_digits-1)} [,length {1 to TM1637Data.num_digits}]]
+* Command:   DisplayText text [, position {0-(Settings.display_width-1)} [,length {1 to Settings.display_width}]]
 \*********************************************************************************************/
 bool CmndTM1637Text(bool clear) {
   char sString[CMD_MAX_LEN + 1];
@@ -621,20 +610,20 @@ bool CmndTM1637Text(bool clear) {
   }
 
 
-  if((position < 0) || (position > (TM1637Data.num_digits-1))) position = 0;
+  if((position < 0) || (position > (Settings.display_width-1))) position = 0;
 
   AddLog(LOG_LEVEL_DEBUG, PSTR("TM7: sString %s, pos %d, len %d"), sString, position, length);
 
   if(clear) TM1637ClearDisplay();
 
   if(!length) length = strlen(sString);
-  if((length < 0) || (length > TM1637Data.num_digits)) length = TM1637Data.num_digits;
+  if((length < 0) || (length > Settings.display_width)) length = Settings.display_width;
 
   uint32_t i = position;
   if(TM1637Data.display_type == TM1637) {
     uint8_t rawBytes[1];
     for(uint32_t j = 0; i< position + length; i++, j++) {
-      if(i > (TM1637Data.num_digits-1)) break;
+      if(i > (Settings.display_width-1)) break;
       if(sString[j] == 0) break;
       rawBytes[0] = tm1637display->encode(sString[j]);
       bool dotSkipped = false;
@@ -665,40 +654,6 @@ bool CmndTM1637Text(bool clear) {
 }
 
 
-/*********************************************************************************************\
-* Sets brightness of the display.
-* Command:  DisplayBrightness {1-8}
-\*********************************************************************************************/
-bool CmndTM1637Brightness(void) {
-
-  uint16_t val = XdrvMailbox.payload;
-  if(ArgC() == 0) {
-    XdrvMailbox.payload = TM1637Data.brightness;
-    return true;
-  }
-
-  if((val < BRIGHTNESS_MIN) || (val > BRIGHTNESS_MAX)) {
-    Response_P(PSTR("{\"Error\":\"Brightness should be a number in the range [%d, %d]\"}"), BRIGHTNESS_MIN, BRIGHTNESS_MAX);
-    return false;
-  }
-  TM1637Data.brightness = val;
-  TM1637SetBrightness(TM1637Data.brightness);
-  return true;
-}
-
-
-
-void TM1637SetBrightness(uint8_t val) {
-  if((val < BRIGHTNESS_MIN) || (val > BRIGHTNESS_MAX)) val = 5;
-  Settings.display_dimmer = val;
-  if(TM1637Data.display_type == TM1637)  tm1637display->setBacklight(val*10);
-  else if(TM1637Data.display_type == TM1638) tm1638display->brightness(val-1);
-}
-
-
-
-
-
 /*********************************************************************************************\
 * Displays a clock.
 * Command: DisplayClock 1   // 12-hour format
@@ -788,9 +743,6 @@ bool TM1637MainFunc(uint8_t fn) {
     case FUNC_DISPLAY_FLOATNC :
       result = CmndTM1637Float(false);
       break;
-    case FUNC_DISPLAY_BRIGHTNESS:
-      result = CmndTM1637Brightness();
-      break;
     case FUNC_DISPLAY_RAW:
       result = CmndTM1637Raw();
       break;
@@ -817,10 +769,147 @@ bool TM1637MainFunc(uint8_t fn) {
   return result;
 }
 
+void TM1637Dim(void) {
+  // Settings.display_dimmer = 0 - 15
+  uint8_t brightness = Settings.display_dimmer >> 1;  // 0 - 7
+
+  if (TM1637 == TM1637Data.display_type) {
+    tm1637display->setBacklight(brightness * 12);  // 0 - 84
+  }
+  else if (TM1637Data.display_type == TM1638) {
+    tm1638display->brightness(brightness);  // 0 - 7
+  }
+}
+
+/*********************************************************************************************/
+
+#ifdef USE_DISPLAY_MODES1TO5
+
+void TM1637Print(char* txt) {
+  for (uint32_t i = 0; i < Settings.display_cols[0]; i++) {
+    if (TM1637 == TM1637Data.display_type) {
+      uint8_t rawBytes[1];
+      rawBytes[0] = tm1637display->encode(txt[i]);
+//      if ((millis() % 1000) > 500 && (i == 1)) { rawBytes[0] = rawBytes[0] | 128; }
+      tm1637display->printRaw(rawBytes, 1, i);
+    }
+    else if (TM1638 == TM1637Data.display_type) {
+//      if ((millis() % 1000) > 500 && (i == 1)) { tm1638display->displayASCIIwDot(i, txt[i]); }
+      tm1638display->displayASCII(i, txt[i]);
+    }
+  }
+}
+
+void TM1637Center(char* txt) {
+  char line[Settings.display_cols[0] +2];
+
+  int len = strlen(txt);
+  int offset = 0;
+  if (len >= Settings.display_cols[0]) {
+    len = Settings.display_cols[0];
+  } else {
+    offset = (Settings.display_cols[0] - len) / 2;
+  }
+  memset(line, 0x20, Settings.display_cols[0]);
+  line[Settings.display_cols[0]] = 0;
+  for (uint32_t i = 0; i < len; i++) {
+    line[offset +i] = txt[i];
+  }
+  TM1637Print(line);
+}
+
+/*
+bool TM1637PrintLog(void) {
+  bool result = false;
+
+  disp_refresh--;
+  if (!disp_refresh) {
+    disp_refresh = Settings.display_refresh;
+    if (!disp_screen_buffer_cols) { DisplayAllocScreenBuffer(); }
+
+    char* txt = DisplayLogBuffer('\337');
+    if (txt != nullptr) {
+      uint8_t last_row = Settings.display_rows -1;
+
+      strlcpy(disp_screen_buffer[last_row], txt, disp_screen_buffer_cols);
+      DisplayFillScreen(last_row);
+
+      AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_DEBUG "[%s]"), disp_screen_buffer[last_row]);
+
+      TM1637Print(disp_screen_buffer[last_row]);
+
+      result = true;
+    }
+  }
+  return result;
+}
+*/
+
+void TM1637Time(void) {
+  char line[Settings.display_cols[0] +1];
+
+  if (Settings.display_cols[0] >= 8) {
+    snprintf_P(line, sizeof(line), PSTR("%02d %02d %02d"), RtcTime.hour, RtcTime.minute, RtcTime.second);
+  }
+  else if (Settings.display_cols[0] >= 6) {
+    snprintf_P(line, sizeof(line), PSTR("%02d%02d%02d"), RtcTime.hour, RtcTime.minute, RtcTime.second);
+  }
+  else {
+    snprintf_P(line, sizeof(line), PSTR("%02d%02d"), RtcTime.hour, RtcTime.minute);
+  }
+  TM1637Center(line);
+}
+
+void TM1637Date(void) {
+  char line[Settings.display_cols[0] +1];
+
+  if (Settings.display_cols[0] >= 8) {
+    snprintf_P(line, sizeof(line), PSTR("%02d-%02d-%02d"), RtcTime.day_of_month, RtcTime.month, RtcTime.year -2000);
+  }
+  else if (Settings.display_cols[0] >= 6) {
+    snprintf_P(line, sizeof(line), PSTR("%02d%02d%02d"), RtcTime.day_of_month, RtcTime.month, RtcTime.year -2000);
+  }
+  else {
+    snprintf_P(line, sizeof(line), PSTR("%02d%02d"), RtcTime.day_of_month, RtcTime.month);
+  }
+  TM1637Center(line);
+}
+
+void TM1637Refresh(void) {  // Every second
+  if (!disp_power || !Settings.display_mode) { return; }  // Mode 0 is User text
+
+  switch (Settings.display_mode) {
+    case 1:  // Time
+      TM1637Time();
+      break;
+    case 2:  // Date
+      TM1637Date();
+      break;
+    case 3:  // Time
+      if (TasmotaGlobal.uptime % Settings.display_refresh) {
+        TM1637Time();
+      } else {
+        TM1637Date();
+      }
+      break;
+/*
+    case 4:  // Mqtt
+      TM1637PrintLog();
+      break;
+    case 5: {  // Mqtt
+      if (!TM1637PrintLog()) { TM1637Time(); }
+      break;
+    }
+*/
+  }
+}
+
+#endif  // USE_DISPLAY_MODES1TO5
 
 /*********************************************************************************************\
  * Interface
 \*********************************************************************************************/
+
 bool Xdsp15(uint8_t function) {
   bool result = false;
 
@@ -830,11 +919,16 @@ bool Xdsp15(uint8_t function) {
   else if (TM1637Data.init_done && (XDSP_15 == Settings.display_model)) {
     switch (function) {
       case FUNC_DISPLAY_EVERY_50_MSECOND:
-        if (disp_power) {
+        if (disp_power && !Settings.display_mode) {
           if (TM1637Data.scroll) { TM1637ScrollText(); }
           if (TM1637Data.show_clock) { TM1637ShowTime(); }
         }
         break;
+#ifdef USE_DISPLAY_MODES1TO5
+      case FUNC_DISPLAY_EVERY_SECOND:
+        TM1637Refresh();
+        break;
+#endif  // USE_DISPLAY_MODES1TO5
       case FUNC_DISPLAY_MODEL:
         result = true;
         break;
@@ -850,12 +944,14 @@ bool Xdsp15(uint8_t function) {
       case FUNC_DISPLAY_SCROLLTEXT:
       case FUNC_DISPLAY_SCROLLDELAY:
       case FUNC_DISPLAY_CLOCK:
-        TM1637Data.show_clock = false;
-      case FUNC_DISPLAY_BRIGHTNESS:
-        if (disp_power) {
+        if (disp_power && !Settings.display_mode) {
+          TM1637Data.show_clock = false;
           result = TM1637MainFunc(function);
         }
         break;
+      case FUNC_DISPLAY_DIM:
+        TM1637Dim();
+        break;
       case FUNC_DISPLAY_POWER:
         if (!disp_power) { TM1637ClearDisplay(); }
         break;