Fix ESP8266 relay power on spikes

Fix ESP8266 set GPIO's to input on power on fixing relay spikes (#17531)

CHANGELOG.md

@@ -23,6 +23,7 @@ All notable changes to this project will be documented in this file.
 - Shutter default motorstop set to 0 (#17403)
 - Shutter default tilt configuration (#17484)
 - Modbus transmit enable GPIO enabled once during write buffer
+- ESP8266 set GPIO's to input on power on fixing relay spikes (#17531)
 
 ### Removed
 

RELEASENOTES.md

@@ -127,6 +127,7 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm
 
 ### Fixed
 - Modbus transmit enable GPIO enabled once during write buffer
+- ESP8266 set GPIO's to input on power on fixing relay spikes [#17531](https://github.com/arendst/Tasmota/issues/17531)
 - Shutter default motorstop set to 0 [#17403](https://github.com/arendst/Tasmota/issues/17403)
 - Shutter default tilt configuration [#17484](https://github.com/arendst/Tasmota/issues/17484)
 

tasmota/tasmota_support/support_cores.ino

@@ -1,63 +0,0 @@
-/*
-  support_cores.ino - Arduino core support for Tasmota
-
-  Copyright (C) 2021  Theo Arends
-
-  This program is free software: you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation, either version 3 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*********************************************************************************************\
- * Core overrides
-\*********************************************************************************************/
-
-// Add below line to tasmota_globals.h
-// extern "C" void resetPins();
-void resetPins()
-{
-/*
-  for (int i = 0; i <= 5; ++i) {
-    pinMode(i, INPUT);
-  }
-  // pins 6-11 are used for the SPI flash interface
-  for (int i = 12; i <= 16; ++i) {
-    pinMode(i, INPUT);
-  }
-*/
-}
-
-/*********************************************************************************************\
- * Hardware related
-\*********************************************************************************************/
-
-#ifdef ESP8266
-
-void HwWdtDisable(void) {
-  *((volatile uint32_t*) 0x60000900) &= ~(1);  // Hardware WDT OFF
-}
-
-void HwWdtEnable(void) {
-  *((volatile uint32_t*) 0x60000900) |= 1;     // Hardware WDT ON
-}
-
-void WdtDisable(void) {
-  ESP.wdtDisable();
-  HwWdtDisable();
-}
-
-void WdtEnable(void) {
-  HwWdtEnable();
-  ESP.wdtEnable(0);
-}
-
-#endif  // ESP8266

tasmota/tasmota_support/support_esp.ino

@@ -33,6 +33,54 @@ extern "C" {
 extern struct rst_info resetInfo;
 }
 
+/*********************************************************************************************\
+ * Core overrides executed directly by core
+\*********************************************************************************************/
+
+// Add below line to tasmota_globals.h
+// extern "C" void resetPins();
+// This function is executed by core init() (as initPins()) in core_esp8266_wiring.cpp
+// 20221229 - Re-enabled with additional check to execute on power on only fixing short relay power on/off
+// 20?????? - Disabled for unknown reason
+void resetPins() {
+  if ((resetInfo.reason == REASON_DEFAULT_RST) || (resetInfo.reason == REASON_EXT_SYS_RST)) {
+    // Only perform at power on
+    for (int i = 0; i <= 5; ++i) {
+      pinMode(i, INPUT);
+    }
+    // pins 6-11 are used for the SPI flash interface
+    for (int i = 12; i <= 16; ++i) {
+      pinMode(i, INPUT);
+    }
+  }
+}
+
+/*********************************************************************************************\
+ * Hardware related
+\*********************************************************************************************/
+
+void HwWdtDisable(void) {
+  *((volatile uint32_t*) 0x60000900) &= ~(1);  // Hardware WDT OFF
+}
+
+void HwWdtEnable(void) {
+  *((volatile uint32_t*) 0x60000900) |= 1;     // Hardware WDT ON
+}
+
+void WdtDisable(void) {
+  ESP.wdtDisable();
+  HwWdtDisable();
+}
+
+void WdtEnable(void) {
+  HwWdtEnable();
+  ESP.wdtEnable(0);
+}
+
+/*********************************************************************************************\
+ * ESP8266 specifics
+\*********************************************************************************************/
+
 uint32_t ESP_ResetInfoReason(void) {
   return resetInfo.reason;
 }