diff --git a/tasmota/tasmota_xsns_sensor/xsns_06_dht_v6.ino b/tasmota/tasmota_xsns_sensor/xsns_06_dht_v6.ino
index 77ded0e4e..45f3c361a 100644
--- a/tasmota/tasmota_xsns_sensor/xsns_06_dht_v6.ino
+++ b/tasmota/tasmota_xsns_sensor/xsns_06_dht_v6.ino
@@ -65,8 +65,6 @@ uint32_t DhtExpectPulse(bool level) {
 }
 
 bool DhtRead(uint32_t sensor) {
-  dht_data[0] = dht_data[1] = dht_data[2] = dht_data[3] = dht_data[4] = 0;
-
   dht_pin = Dht[sensor].pin;
   if (!dht_dual_mode) {
     // Go into high impedence state to let pull-up raise data line level and
@@ -163,6 +161,37 @@ bool DhtRead(uint32_t sensor) {
 
   if (i < 80) { return false; }
 
+//  AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("DHT: Pin%d cycles %u %u %u %u %u %u %u %u %u %u %u %u %u %u %u %u .."),
+//    dht_pin, cycles[0], cycles[1], cycles[2], cycles[3], cycles[4], cycles[5], cycles[6], cycles[7], cycles[8], cycles[9], cycles[10], cycles[11], cycles[12], cycles[13], cycles[14], cycles[15]);
+  // DHT11 on ESP8266 - 80MHz
+  // 10:49:06.532 DHT: Pin14 cycles 81 35 74 34 81 106 81 35 81 34 81 34 81 106 81 35 ..
+  // 10:49:06.533 DHT: Pin14 read 22001A003C
+  // DHT11 on ESP32 - 80MHz
+  // 10:55:51.868 DHT: Pin25 cycles 94 33 86 41 94 124 94 40 95 40 94 41 94 124 94 40 ..
+  // 10:55:51.872 DHT: Pin25 read 22001A003C
+  // DHT11 on ESP32-S3 - 240MHz
+  // 11:13:44.712 DHT: Pin21 cycles 264 116 264 117 267 350 258 117 267 117 267 117 267 349 268 116 ..
+  // 11:13:44.713 DHT: Pin21 read 22001A003C
+  // AM2301 on ESP8266 - 80MHz
+  // 11:00:06.423 DHT: Pin14 cycles 92 38 83 38 89 38 89 38 90 38 89 38 89 38 89 114 ..
+  // 11:00:06.425 DHT: Pin14 read 01F900FCF6
+  // AM2301 on ESP32 - 80MHz
+  // 14:54:15.930 DHT: Pin25 cycles 99 45 96 45 104 45 103 45 104 45 103 46 103 132 104 45 ..
+  // 14:54:15.932 DHT: Pin25 read 020B010513
+  // AM2301 on ESP32-S3 - 240MHz
+  // 11:07:29.700 DHT: Pin21 cycles 301 129 290 129 294 127 293 129 294 129 294 129 293 129 294 374 ..
+  // 11:07:29.701 DHT: Pin21 read 01E300FFE3
+  // Sonoff MS01 on ESP8266 - 80MHz
+  // 10:54:38.409 DHT: Pin14 cycles 80 39 72 105 79 105 79 39 78 106 78 106 79 105 79 39 ..
+  // 10:54:38.412 DHT: Pin14 read 6E620FA07F
+  // Sonoff MS01 on ESP32 - 80MHz
+  // 14:34:34.811 DHT: Pin25 cycles 84 47 83 123 91 123 91 46 91 123 91 123 91 123 91 47 ..
+  // 14:34:34.816 DHT: Pin25 read 6EE30FA000
+  // Sonoff THS01 on ESP32 - 80MHz
+  // 14:36:43.787 DHT: Pin25 cycles 67 42 66 41 75 42 74 42 75 42 75 41 75 131 74 52 ..
+  // 14:36:43.789 DHT: Pin25 read 020B00FC09
+
+  dht_data[0] = dht_data[1] = dht_data[2] = dht_data[3] = dht_data[4] = 0;
   // Inspect pulses and determine which ones are 0 (high state cycle count < low
   // state cycle count), or 1 (high state cycle count > low state cycle count).
   for (int i = 0; i < 40; ++i) {
@@ -179,8 +208,6 @@ bool DhtRead(uint32_t sensor) {
     // stored data.
   }
 
-  AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("DHT: Pin%d read %5_H"), dht_pin, dht_data);
-
   uint8_t checksum = (dht_data[0] + dht_data[1] + dht_data[2] + dht_data[3]) & 0xFF;
   if (dht_data[4] != checksum) {
     AddLog(LOG_LEVEL_DEBUG, PSTR("DHT: Pin%d checksum failure %5_H =? %02X"),
@@ -188,6 +215,8 @@ bool DhtRead(uint32_t sensor) {
     return false;
   }
 
+  AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("DHT: Pin%d read %5_H"), dht_pin, dht_data);
+
   float temperature = NAN;
   float humidity = NAN;
   switch (Dht[sensor].type) {