Merge branch 'development' of https://github.com/arendst/Sonoff-Tasmota into development

README.md

@@ -182,6 +182,7 @@ People helping to keep the show on the road:
 - Gerhard Mutz for his SGP30 and Sunrise/Sunset driver
 - Nuno Ferreira for his HC-SR04 driver
 - Adrian Scillato for his (security)fixes and implementing and maintaining KNX
+- Gennaro Tortone for his Eastron SDM120 driver
 - Raymond Mouthaan for managing Wemos Wiki information
 - Norbert Richter, Frogmore42 and Jason2866 for providing many issue answers
 - Many more providing Tips, Pocs or PRs

sonoff/_releasenotes.ino

@@ -6,11 +6,13 @@
  * Fix several timer data input and output errors (#2597, #2620)
  * Fix KNX config error (#2628)
  * Fix sensor MHZ-19 vanishing data over time (#2659)
+ * Fix KNX reconnection issue (#2679)
  * Add Portuguese in Brazil language file
  * Add rule state test for On/Off in addition to 0/1 (#2613)
  * Add hardware serial option to MHZ-19 sensor (#2659)
+ * Add Eastron SDM120 energy meter (#2694)
  * Updated Italian language file (#2618)
- * Update TasmotaSerial to 2.0.0 allowing Hardware Serial Fallback when correct connection are configured
+ * Update TasmotaSerial to 2.0.0 allowing Hardware Serial Fallback when correct connections are configured
  * Optimize command handling
  *
  * 5.13.1 20180501

sonoff/language/nl-NL.h

@@ -28,7 +28,7 @@
  * Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
  * Use online command Prefix to translate cmnd, stat and tele.
  *
- * Updated until v5.12.0l
+ * Updated until v5.13.1a
 \*********************************************************************/
 
 //#define LANGUAGE_MODULE_NAME         // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
@@ -91,7 +91,7 @@
 #define D_FALSE "Onwaar"
 #define D_FILE "Bestand"
 #define D_FREE_MEMORY "Vrij geheugen"
-#define D_FREQUENCY "Frequency"
+#define D_FREQUENCY "Frequentie"
 #define D_GAS "Gas"
 #define D_GATEWAY "Gateway"
 #define D_GROUP "Groep"
@@ -377,24 +377,24 @@
 #define D_TIMER_ACTION "Actie"
 
 // xdrv_10_knx.ino
-#define D_CONFIGURE_KNX "Configure KNX"
+#define D_CONFIGURE_KNX "Configureer KNX"
 #define D_KNX_PARAMETERS "KNX Parameters"
-#define D_KNX_GENERAL_CONFIG "General"
+#define D_KNX_GENERAL_CONFIG "Algemeen"
-#define D_KNX_PHYSICAL_ADDRESS "Physical Address"
+#define D_KNX_PHYSICAL_ADDRESS "Eigen adres"
-#define D_KNX_PHYSICAL_ADDRESS_NOTE "( Must be unique on the KNX network )"
+#define D_KNX_PHYSICAL_ADDRESS_NOTE "(Moet uniek zijn op het KNX netwerk)"
-#define D_KNX_ENABLE "Enable KNX"
+#define D_KNX_ENABLE "KNX inschakelen"
-#define D_KNX_GROUP_ADDRESS_TO_WRITE "Data to Send to Group Addresses"
+#define D_KNX_GROUP_ADDRESS_TO_WRITE "Stuur gegevens naar groep adressen"
-#define D_ADD "Add"
+#define D_ADD "Toevoegen"
-#define D_DELETE "Delete"
+#define D_DELETE "Verwijder"
-#define D_REPLY "Reply"
+#define D_REPLY "Antwoord"
-#define D_KNX_GROUP_ADDRESS_TO_READ "Group Addresses to Receive Data from"
+#define D_KNX_GROUP_ADDRESS_TO_READ "Ontvang gegevens van groep adressen"
 #define D_LOG_KNX "KNX: "
-#define D_RECEIVED_FROM "Received from"
+#define D_RECEIVED_FROM "Ontvangen van"
-#define D_KNX_COMMAND_WRITE "Write"
+#define D_KNX_COMMAND_WRITE "Schrijven"
-#define D_KNX_COMMAND_READ "Read"
+#define D_KNX_COMMAND_READ "Lezen"
-#define D_KNX_COMMAND_OTHER "Other"
+#define D_KNX_COMMAND_OTHER "Overige"
-#define D_SENT_TO "sent to"
+#define D_SENT_TO "verzend naar"
-#define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
+#define D_KNX_WARNING "Groep adres (0/0/0) is gereserveerd en mag niet worden gebruikt."
 
 // xdrv_03_energy.ino
 #define D_ENERGY_TODAY "Verbruik vandaag"

sonoff/support.ino

@@ -35,6 +35,10 @@ byte oswatch_blocked_loop = 0;
 //void OsWatchTicker() ICACHE_RAM_ATTR;
 #endif  // USE_WS2812_DMA
 
+#ifdef USE_KNX
+bool knx_started = false;
+#endif  // USE_KNX
+
 void OsWatchTicker()
 {
   unsigned long t = millis();
@@ -822,11 +826,20 @@ void WifiCheck(uint8_t param)
         }
 #endif  // USE_EMULATION
 #endif  // USE_WEBSERVER
+#ifdef USE_KNX
+        if (!knx_started && Settings.flag.knx_enabled) {
+          KNXStart();
+          knx_started = true;
+        }
+#endif  // USE_KNX
       } else {
 #if defined(USE_WEBSERVER) && defined(USE_EMULATION)
         UdpDisconnect();
 #endif  // USE_EMULATION
         mdns_begun = false;
+#ifdef USE_KNX
+        knx_started = false;
+#endif  // USE_KNX
       }
     }
   }

sonoff/webserver.ino

@@ -392,9 +392,6 @@ void StartWebserver(int type, IPAddress ipweb)
       }
 #endif  // USE_EMULATION
       WebServer->onNotFound(HandleNotFound);
-#ifdef USE_KNX
-      KNXStart();
-#endif // USE_KNX
     }
     reset_web_log_flag = 0;
     WebServer->begin(); // Web server start
@@ -740,7 +737,7 @@ void HandleModuleConfiguration()
   for (byte i = 0; i < MAX_GPIO_PIN; i++) {
     if (GPIO_USER == cmodule.gp.io[i]) {
       snprintf_P(stemp, 3, PINS_WEMOS +i*2);
-      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("<tr><td style='width:190px'>%s <b>" D_GPIO "%d</b> %s</td><td style='width:126px'><select id='g%d' name='g%d'></select></td></tr>"),
+      snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("<tr><td style='width:190px'>%s <b>" D_GPIO "%d</b> %s</td><td style='width:146px'><select id='g%d' name='g%d'></select></td></tr>"),
         (WEMOS==Settings.module)?stemp:"", i, (0==i)? D_SENSOR_BUTTON "1":(1==i)? D_SERIAL_OUT :(3==i)? D_SERIAL_IN :(12==i)? D_SENSOR_RELAY "1":(13==i)? D_SENSOR_LED "1i":(14==i)? D_SENSOR :"", i, i);
       page += mqtt_data;
     }

sonoff/xsns_23_sdm120.ino

@@ -279,4 +279,5 @@ boolean Xsns23(byte function)
   return result;
 }
 
-#endif   // USE_SDM120
+#endif   // USE_SDM120
+