diff --git a/_releasenotes.ino b/_releasenotes.ino deleted file mode 100644 index db3d490a3..000000000 --- a/_releasenotes.ino +++ /dev/null @@ -1,900 +0,0 @@ -/* 5.5.1b - * Extent max number of WS2812 pixels from 256 to 512 (#667) - * Add OTA handling if server responds with no update available (#695) - * Removed undocumented command FlashMode (#696) - * Fix compile time error message due to increased message buffer size (#703) - * - * 5.5.1 20170805 - * Fix Sonoff Rf Bridge issues - * Add Sonoff RF Bridge MQTT messages on received and learned RF signal - * Add command VoltRes 0|1 to select voltage resolution to 0.1 V (#654) - * Add averaging to Analog input (#686) - * Add Energy tele data on Sonoff Pow Threshold change (#688) - * Fix inconsistent property names in Messages (#690) - * - * 5.5.0 20170730 - * Reduce code space by removing the following commands as they are replaced by SetOption alternatives: - * SaveState = SetOption0 - * ButtonRestrict = SetOption1 - * Units = SetOption2 - * MQTT = SetOption3 - * MQTTResponse = SetOption4 - * TempUnit = SetOption8 - * Smoothing WS2812 animation poll, invert fade speed and max allowed wakeup time down to 3000 seconds - * Fix initial button press detection - * Add support for Sonoff RF Bridge 433 using command RfKey - * Fix regression from 5.0.7 by increasing message buffer size from 360 to 368 to accomodate 4 x DS18x20 sensors (#637) - * Add GroupTopic to Topic test when using ButtonTopic/SwitchTopic to send either ON/OFF or TOGGLE (#642) - * Adjust HLW calibration limits to accomodate HuaFan device and add commands HlwPSet, HlwUSet and HlwISet (#654) - * - * 5.4.0 20170725 - * Fix command reset regression introduced in 5.2.0 - * Increase polling from 0.1 second to 0.05 second - * Add multipress to all buttons - * Fix button 1 double press behaviour on multi relay devices - * Add support for Hua Fan Smart Socket (#479) - * Add support for Sonoff 4ch Pro (#565) - * Add command SetOption13 1 to allow immediate action on single button press - * (disables multipress, hold and unrestricted commands) (#587) - * - * 5.3.0 20170715 - * Major Hue rewrite which might introduce Alexa problems. If so, initiate an issue - * Add support for Sonoff Led and BN-SZ01 Ceiling Led brightness control to Hue - * Fix Sonoff Led Power, Dimmer and Color MQTT response (#176) - * Add commands Delay and Backlog to allow multiple commands at once separated by ";" (#593) - * Use default flashmode DOUT to solve restart hangs on esp8285 chips (#453, #598) - * Change Web console column width from 99 to 300 (#599) - * - * 5.2.4 20170703 - * Removed flash mode update after selecting different module solving esp8285 related problems - * Add device type flag to sonoff_template.ino - * Change Sonoff Led Wakeup and add support for Sonoff BN-SZ01 Led (#567) - * - * 5.2.3 20170630 - * Change Sonoff Led color conversion code - * Fix SetOption12 handling - * Simplify auto configuration upgrade - * Add option Upgrade to only upgrade to any higher version (Old PR #213) - * Change FallbackTopic to cmnd// bypassing FullTopic and Prefix (#538) - * - * 5.2.2 20170625 - * Add configuration SaveAddress to Status 1 and Information Page - * Change Sonoff Led Color conversion from AtoH to strtol - * Fix possible wrong uploads due to configuration overwrites (#542) - * Fix payload negative numbers (#547) - * - * 5.2.1 20170622 - * Fix Restore Configuration in case of lower version - * Revert auto configuration upgrade allowing easy upgrade which was removed in version 5.2.0 - * Fix config auto upgrade from versions below version 4.1.1 (#530) - * - * 5.2.0 20170619 - * Add command SetOption12 1 to disable newly released configuration flash rotate to reduce flash wear - * Fix command CounterDebounce by removing test for active GPIO (#524) - * Add command SetOption33 1..250 to allow user configure POW Max_Power_Retry count (#525) - * - * 5.1.7 20170616 - * Prep removal of SetOptions alternatives - * Restore webpage upgrade error messages removed in 5.1.5 - * Add hold button functionality to buttons 2 to 4 - * Add command SetOption32 1..100 to set Key Hold Time from 0.1 seconds to 10 seconds (#200) - * Allow slashes in Topic, GroupTopic, ButtonTopic and SwitchTopic (#507) - * Changed webpage form actions from post to get and use relative path url (#434, #522) - * - * 5.1.6 20170606 - * Shrink code - * Removed online configuration of Domoticz In and Domoticz Out MQTT strings - * Removed commands DomoticzInTopic and DomoticzOutTopic - * Add define KEY_HOLD_TIME to configure button hold threshold before sending MQTT Hold message - * Add command StateText4 to configure button MQTT Hold text (= MQTT_CMND_HOLD) - * Add command SetOption11 0|1 to swap pushbutton single and double press functionality (#200) - * Add command SwitchMode 5 (PUSHBUTTONHOLD) and 6 (PUSHBUTTONHOLD_INV) (#489) - * - * 5.1.5 20170604 - * Shrink code in preparation to ESP8266-Arduino 2.4.0-rc1 - * Add effect parameter to HUE Device (#464) - * - * 5.1.4 20170601 - * Removed pre-compiled versions from repository as they are available within the release - * Changed HUE Device type to color supporting version (#464) - * Fix compile error when BE_MINIMAL is selected (#467, #476) - * Add multiple compiled versions to release using updated Travis script and platformio.ini (#467) - * - * 5.1.3 20170520 - * Add Domoticz Counter - * - * 5.1.2 20170519 - * Fix Counter/Timer JSON message and update Counter/Timer on webpage - * Fix WS2812 Domoticz related regression issues - * - * 5.1.1 20170517 - * Allow command FullTopic in group mode - * Prepare for more use of RTC memory - * Add independant WS2812 led string power control (#386, #390) - * Add command Counter to control up to four GPIO falling edge interrupt counters or timers (#459) - * Add command CounterType to select between pulse counting or pulse timing - * Add command CounterDebounce to select global counter debounce time in mSec - * - * 5.1.0 20170513 - * Fix Offline/Removal of retained topic when FullTopic is changed - * Add FullTopic to MQTT Configuration and Information web pages - * Add license model GPLv3 (#188) - * - * 5.0.7 20170511 - * Fix possible exception 28 on empty command - * Add command SetOption0 as replacement for SaveState - * Add command SetOption1 as replacement for ButtonRestrict - * Add command SetOption2 as replacement for Units - * Add command SetOption4 as replacement for MqttResponse - * Add command SetOption8 as replacement for TempUnit - * Add command SetOption10 On|Off to select between Offline or Removing previous retained topic (#417, #436) - * - * 5.0.6 20170510 - * Remove hyphen in case of a single DHT sensor connected (#427) - * Add command MqttRetry to change default MQTT reconnect retry timer from minimal 10 seconds (#429) - * - * 5.0.5 20170508 - * Add command FullTopic with tokens %topic% (replaced by command Topic value) and - * %prefix% (replaced by command Prefix values) for more flexible topic definitions (#244) - * See wiki > MQTT Features https://github.com/arendst/Sonoff-Tasmota/wiki/MQTT-Features for more information - * - * 5.0.4 20170505 - * Add Sonoff Pow Energy Total up to 40 MWh - * Add command EnergyReset 1|2|3 to reset Energy counters (#406) - * Fix Domoticz Energy logging (#411) - * Add command PowerOnState 4 to keep relay always on and disabling all power control (#418) - * - * 5.0.3 20170504 - * Add command SensorRetain on|off to enable retaining of mqtt message tele/sonoff/SENSOR (#74) - * Change WifiConfig timeout from 60 seconds to 180 seconds (#212) - * Change Sonoff Touch command Ledstate functionality by turning led on if power is off (#214) - * Add 4 seconds delay after power on before enabling button to workaround Wemos D1 mini RTS circuit (#380) - * - * 5.0.2 20170503 - * Reset SaveData, SaveState and MqttResponse to default values due to rearranging settings - * Moved some settings to flag area - * Add command TempUnit Celsius|Fahrenheit for selecting Celsius or Fahrenheit (#347) - * Add command TempRes 0..3 for selecting Temperature Resolution (#347) - * Add command HumRes 0..3 for selecting Humidity Resolution (#347) - * Add command PressRes 0..3 for selecting Pressure Resolution (#347) - * Add command EnergyRes 0..5 for selecting Energy Resolution (#347) - * Add "TempUnit":"C|F" to sensor JSON output (#347) - * Add support for up to three DHT type sensors each using a different GPIO (#339, #404) - * - * 5.0.1 20170429 - * Adjust Sonoff SC messages to prepare for display feature - * Move static data from RAM to Flash - * Fix PowerOnState for some devices not reporting "Power on" state (#284, #380, #383) - * - * 5.0.0 20170425 - * Memory status message update - * Fix setting migration to better preserve settings during move (#382) - * Best practice is first doing a Backup Configuration before installing version 5.0.0 - * Reset save count after setting move - * Start using new linker script without SPIFFS - * - * 4.2.0 20170424 - * Prepare for SPIFFS removal by moving settings to EEPROM area - * Fix compilation error when webserver is disabled (#378) - * - * 4.1.3 20170410 - * Add user configuarble GPIO to module S20 Socket and Slampher - * Add support for Sonoff SC (#112) - * Set PWM frequency from 1000Hz to 910Hz as used on iTead Sonoff Led firmware (#122) - * Set Sonoff Led unconfigured floating outputs to 0 to reduce exceptions due to power supply instabilities (#122) - * Add Access Point Mac Address to Status 11 and Telemetry (#329) - * Fix DS18B20 negative temperature readings (#334) - * - * 4.1.2 20170403 - * Rename Unrecognised command to Unknown command - * Remove all command lists - * Remove command SmartConfig (superseded by WifiConfig) - * Fix boot loop when selecting module Sonoff 4CH or Sonoff Touch on non ESP8285 hardware - * Add optional support for Toshiba and Mitsubishi HVAC IR control (needs updated IRremote8266 library) (#83, #257) - * Add all configured switches to Domoticz Configuration web page (#305) - * Fix compile error when selecting WS2812 DMA (#313) - * - * 4.1.1 20170329 - * Fix default Telemetry for command Prefix3 - * Fix webserver Module parameters for disabled select - * Fix sensor status for enabled switches - * Remove Light as alternative for Power (save code space) - * Remove migration option from pre V3 (code cleanup) - * Remove unofficial SPIFFS support (code cleanup) - * Remove command list when unknown command is entered (save code space) - * Rename Status11 json from StatusPWR to unique StatusSTS - * Rename command Gateway to IPAddres2, Subnetmask to IPAddress3 and DnsServer to IPAddress4 (save code space) - * Add Command MqttResponse to select either command or RESULT topic as response (#258) - * Add command StateText1 to StateText3 to assign MQTT_STATUS_OFF, MQTT_STATUS_ON and MQTT_CMND_TOGGLE respectively (#286) - * Remove restart after IPAddress changes (#292) - * Add support for MAX31850 in xsns_ds18x20.ino (#295) - * Fix possible uptime update misses (#302) - * - * 4.1.0 20170325 - * Change static IP addresses in user_config.h from list (using commas) to string (using dots) - * Unify display result of commands Modules, Module and Gpios - * Rewrite Module selection web page to bring size down from 18651 to 4319 bytes (!) (#234, #240) - * Add basic support for (Lixada) H801 RGBWW controller (#252) - * Add command Prefix1 to Prefix3 to assign SUB_PREFIX, PUB_PREFIX and PUB_PREFIX2 respectively (#255) - * Add static ip addresses to flash (#262) - * Add commands IpAddress, Gateway, Subnetmask and DnsServer to select static ip addresses (#273) - * - * 4.0.8 20170321 - * Fix entering non-numeric webpassword - * Force selection between TLS or Webserver due to memory restraint (#240) - * Allow entering empty string using "0" for selected commands (#242) - * Fix exception when posting commands to web console containing % (#250) - * - * 4.0.7 20170319 - * Increased Sonoff Led PWM frequency from 432 to 1000 - * Fix possible watch dog reboot after changing module type on web page - * Fix reporting of GPIO usage from web page - * Fix Sonoff Led blank during firmware upgrade - * Fix Sonoff Led flicker and possible flash corruption by using latest Arduino-esp8266 versions - * of pwm core files included in sonoff library (#211) - * Add PWM output control with commands PWM1 to PWM5 using user selectable GPIOs (#211) - * Fix exceptions due to low values of commands HlwPCal (10000), HlwUCal (1000) and HlwICal (2500) (#223) - * Add Switch state to sensor status (#227, #233) - * Add user configuarble GPIO to module Sonoff Touch (#228) - * Add define WEB_PORT to user_config.h to change default web server port from 80 (#232) - * Fix failed Ota Firmware upgrade started from Web page (#235) - * - * 4.0.6 20170316 - * Fix to better find device by Wifi hostname - * Fix compile error when some I2C devices are disabled - * Add (experimental) support for SHT1X emulating I2C (#97) - * Add ADC to ElectroDragon (#203) - * Add support for Sonoff Dev (#206) - * - * 4.0.5 20170314 - * Add command Status 11 to show power status with Vcc if define USE_ADC_VCC is enabled (default) - * Add ADC input to Sonoff SV and Wemos D1 mini - Needs recompile with define USE_ADC_VCC disabled (#137) - * Add MQTT host:port to timeout message (#199) - * - * 4.0.4 20170312 - * Add pulse timers for up to 4 relays (#106) - * Fix Sonoff Led power state when dimmer or color is 0 (#176) - * Add command NtpServer to configure up to three NTP servers (#177) - * Delete module User Test as module Wemos D1 mini has same/more user configurable GPIO (#178) - * Add more user configurable GPIO to module ElectroDragon (#183) - * - * 4.0.3 20170309 - * Renamed Module NodeMCU to WeMos D1 mini - * Add GPIO1 as user option to some modules - * Add Buttons, Relays and Leds to user configurable options (#159) - * Add description on Module parameters web page to some well known GPIOs (#107, #171) - * - * 4.0.2 20170308 - * Restore correct seriallog level after Serial logging was disabled - * Add simple dimmer slider to Sonoff Led web page - * Reduced root webpage size by 31% - * Expand Status 2 with Build date/time and core version - * Fix webserver redirection when not in WifiManager mode (#156) - * Add command ButtonRestrict On/Off to restrict access to button hold and button multi press options above 2 (#161) - * Fix DS18S20 negative temperature readings (#165) - * Fix crlf compilation error due to bad syntax (#144, #167) - * - * 4.0.1 20170305 - * Fix char default sizes and set MESSZ to 360 (#143) - * Fix SerialLog setting status - * Disable syslog when emulation is active - * Add DS18B20 web page display refresh - * - * 4.0.0 20170303 - * Add define to remove config migration code for versions below 3.0 (See Wiki-Upgrade-Migration path) - * Free memory by switching from String to char[] - * Raised Sonoff Led PWM frequency from 200Hz to 432Hz in search of stability (hardware watchdog timeouts) (#122) - * Increase message size and suggested minimum MQTT_MAX_PACKET_SIZE to 512 (#114, #124) - * Remove runtime warning message regarding MQTT_MAX_PACKET_SIZE too small as it is now moved to compile time (#124) - * Fix possible panics with web console and http commands while UDP syslog is active (#127) - * Add optional static IP address (#129) - * Add define ENERGY_RESOLUTION in user_config.h to allow user control over precision (#136) - * - * 3.9.22 20170228 - * Update web console - * Fix Status 4 JSON message - * Add Exception info during restart if available - * Add osWatch service to detect loop hangs that might happen during (OTA) upgrades - * Add WiOn support for relay and switch only (#82, #102) - * Allow for user specified relay count up to four in sonoff_template.h (#109) - * Add support for HTU21 compatible I2C sensors SI7013, SI7020 and SI7021 (#118) - * Add NodeMCU or Wemos configuration option (#119) - * - * 3.9.21 20170224 - * Add ajax to web root page and web console (#79) - * Add commands SwitchMode1..4 and enable user switches 2, 3 and 4 (#84, #88) - * Fix MQTT upgrade when webserver is active - * - * 3.9.20 20170221 - * Add minimal basic authentication to Web Admin mode (#87) - * Fix Hue and add HSB support (#89) - * - * 3.9.19 20170219 - * Sonoff Led: Made GPIO04, 05 and 15 available for user - * Sonoff Led: Add commands Fade, Speed, WakupDuration, Wakeup and LedTable - * - * 3.9.18 20170218 - * Fix ledstate 0 to turn off led - * Fix Sonoff Led dimmer range (#16) - * Change Sonoff Led command Dimmer to act on both cold and warm color - * Add Sonoff Led command Color CCWW where CCWW are hexadecimal values fro 00 - FF - * Reduce Sonoff Led flickering by disabling interrupts during flash save and disabling - * Led during OTA upgrade and Web upload (#16) - * - * 3.9.17 20170217 - * Fix possible ArduinoJSON related memory fragmentation - * Changed console logging using less memory - * Add GPIO04 as user selectable for Sonoff Dual (#75) - * - * 3.9.16 20170214 - * Update latching relay handler - * Add support for IR led using IRremoteESP8266 library (#59) - * Add Hue argument passing using ArduinoJSON library (#59) - * - * 3.9.15 20170213 - * Change JSON float values from string to number according to http://json.org (#56) - * Add support for exs latched relay module https://ex-store.de/ESP8266-WiFi-Relay-V31 (#58) - * Add support for inverted relays - * Changed MAX_LOG_LINES from 70 to 60 to preserve memory - * - * 3.9.14 20170211 - * Add False and True as alternatives for 0/Off and 1/On (#49) - * Fix Status10 JSON format (#52) - * Fix DS18x20 using OneWire library (#53) - * - * 3.9.13 20170210 - * Add FlashChipMode to Status 4 - * Removed redundant DHT2 option and code - * Add Sonoff SV GPIO pin 05 configuration (#40) - * Add configuration file backup and restore via web page - * Fix latency due to light_sleep mode even if sleep was set to zero (#50) - * - * 3.9.12 20170208 - * Fix compile error when webserver is disabled (#30) - * Fix possible ESP8285 flash problem by updating Flash Chip Mode to DOUT during OTA upload - * Fix hostname issues by not allowing user entry of string formatting and removing from user_config.h (#36) - * - * 3.9.11 20170204 - * Fix command I2Cscan - * Fix not allowed spaces in Topic, ButtonTopic and SwitchTopic - * Make all TELEMETRY, STATUS and COMMAND message topics unique (#4) - * Advertise command topic to be used by iobroker (#299) - * Fix butten (non)detection if no GPIO_KEY1 is defined (#13) - * Change WeMo serialnumber from 7 decimal chars to 8 hexadecimal chars (#18) - * Update web page with Build Date/Time, Emulation and mDNS Discovery and Advertise information (#21) - * - * 3.9.10 20170130 - * Add WS2812 Color Type selection (RGB or GRB) to user_config.h (#7) - * Hue api changes to support HUE App(s) (#8) - * - * 3.9.9 20170130 - * Add command status 10 showing sensor data - * Fix hlw status messages if hlw is disabled - * - * 3.9.8 20170130 - * Remove GPIO07 and GPIO08 from user selectable (#5) - * - * 3.9.7 20170129 - * Fix possible WS2812 exceptions when using emulation - * Add command Emulation to dynamic configure Belkin WeMo and Hue Bridge for Alexa - * - * 3.9.6 20170129 - * Add dynamic sleep for WS2812 animation (#1) - * - * 3.9.5 20170128 - * Fix error message in case of wrong Domoticz command - * - * 3.9.4 20170127 - * Fix Sonoff Dual Relay switching (#287) - * - * 3.9.3 20170127 - * Add confirmation before Restart via webpage - * Expand Domoticz Configuration webpage with Key, Switch and Sensor Index and - * add commands DomoticzSwitchIdx and DomoticzSensorIdx (#86) (#174) (#219) - * Fix default DHT11 sensor driver selection - * Fix LedPower status after button press (#279) - * Add command Sleep 0 - 250 mSec for optional light sleep mode to lower energy consumption (#272) - * (Expect overall button/key/switch misses and wrong values on Sonoff Pow) - * Add Hue brightness extension (#281) - * Fix Hue brightness and change to call by reference (#283) - * - * 3.9.2 20170124 - * Add confirmation before Reset Configuration via webpage (#244) - * Add WS2812 features (see Wiki commands) - * - * 3.9.1 20170124 - * Change PowerOnState function to only trigger when Power On (and not just restart) (#238) - * Move HLW interrupts back to RAM and make WS2812_DMA optional as it generates Exception on Pow (#264) - * Add charset=utf-8 to webpages (#266) - * Update Hue emulation (#268) - * Fix status module number - * Add support for domoticz Dimmer on Sonoff_Led and WS2812 - * Fix possible ESP8285 flash problem by updating Flash Chip Mode to DOUT during web upload - * - * 3.2.6a 20170120 - * Fix Sonoff Pow compile error (#255) - * Move HLW interrupts back to ROM (Needed for WS2812 DMA interrupts) - * Removed all IO config from user_config.h as this will be done by commands or webpage - * Removed MessageFormat and supports JSON only except POWER/LIGHT status - * Add command LedPower to control main led (#247) - * Add more FriendlyNames for Hue (#254) - * Add DMA support for WS2812 when using pin 3 while other pins work just as well in my case... - * Add HUE emulation for Alexa (#229) - * Add basic WS2812 support (#229) - * Fix Wemo when MQTT is disabled (#245) - * Revert ButtonTopic and change SwitchTopic1 - 4 to one SwitchTopic - * Rename MqttUnits to Units - * Add Mqtt command to enable/disable MQTT - * - * 3.2.2a 20170115 - * Add dynamic (Sonoff) Module, user GPIO and sensor selection (one size fits (almost) all) - * Add support for Sonoff LED - * Add Seriallog disable after 600 seconds for Sonoff Dual and 4 Channel - * Add ButtonTopic2 - 4, SwitchTopic1 - 4 and SwitchRetain - * - * 3.2.2 20170113 - * Fix PowerOnState 2 functionality after re-applying power (#230) - * - * 3.2.1 20170113 - * Fix some failed command decoding (#228) - * Removed passwords from status messages (#216) - * - * 3.2.0 20170111 - * Add I2C BH1750 sensor (#222) - * Sensor rewrite preparing for online selection - * - * 3.1.16 20170109 - * Fix Domoticz possible error condition - * Remove Wifi password from connection message (#216) - * Add Configure Other menu item to web page (#209) - * Add command FriendlyName, field Friendly Name and define FRIENDLY_NAME to be used by Alexa - * eliminating current use of MQTT_CLIENT_ID (#209) - * Add friendlyname to webpage replacing former hostname - * - * 3.1.15 20170108 - * Fix Domoticz send key regression with Toggle command - * - * 3.1.14 20170107 - * Add support for command TOGGLE (define MQTT_CMND_TOGGLE) when ButtonTopic is in use and not equal to Topic (#207) - * - * 3.1.13 20170107 - * Fix web console command input when SUB_PREFIX contains '/' (#152) - * Add command response to web command (#200) - * Add option to disable MQTT as define USE_MQTT in user_config.h (#200) - * - * 3.1.12 20170106 - * Add OTA retry to solve possible HTTP transient errors (#204) - * Fix MQTT host discovery - * - * 3.1.11 20170105 - * Add mDNS to advertise webserver as .local/ - * - * 3.1.10 20170105 - * Fix ButtonTopic when SUB_PREFIX = PUB_PREFIX - * Add workaround for possible MQTT queueing when SUB_PREFIX = PUB_PREFIX - * Add optional MQTT host discovery using define USE_DISCOVERY in user_config.h (#115) - * - * 3.1.9 20170104 - * Fix Power Blink start position (toggled) - * Change PulseTime increments: 1 .. 111 in 0.1 sec (max 11 seconds) and 112 .. 64900 in seconds (= 12 seconds until 18 hours) (#188) - * Add support for SUB_PREFIX = PUB_PREFIX (#190) - * - * 3.1.8 20170103 - * Add retain flag to LWT offline and only send "tele/sonoff/LWT Offline" (#179) - * Change retained LWT Online message to only send "tele/sonoff/LWT Online" - * - * 3.1.7 20161231 - * Add retained message LWT Online when sonoff makes MQTT connection (#179) - * - * 3.1.6 20161230 - * Add blinking using commands BlinkTime, BlinkCount and Power Blink|3|BlinkOff|4 (#165) - * - * 3.1.5 20161228 - * Fix serial space command exception (28) - * - * 3.1.4 20161227 - * Fix MQTT subscribe regression exception (3) (#162) - * Fix serial empty command exception (28) - * - * 3.1.3 20161225 - * Extent Domoticz configuration webpage with optional indices (#153) - * Fix multi relay legacy tele message from tele/sonoff/2/POWER to tele/sonoff/POWER2 - * Add support for iTead Motor Clockwise/Anticlockwise - * - * 3.1.2 20161224 - * Extent command PowerOnState with toggle at power on (option 2 is now option 3!) (#156) - * - * 3.1.1 20161223 - * Add support for Sonoff Touch and Sonoff 4CH (#40) - * Update DomoticzIdx and DomoticzKeyIdx with relay/key index (DomoticzIdx1/DomoticzKeyIdx1) - * Add command PowerOnState to control relay(s) at power on (#154) - * - * 3.1.0 20161221 - * Add Sonoff Pow measurement smoothing - * Fix serial command topic preamble error (#151) - * Fix 2.x to 3.x migration inconsistencies (#146) - * - * 3.0.9 20161218 - * Add Sonoff Pow voltage reading when relay is on but no load present (#123) - * - * 3.0.8 20161218 - * Add temperature conversion to Fahrenheit as option in user_config.h (TEMP_CONVERSION) (#145) - * - * 3.0.7 20161217 - * Add user_config_override.h to be used by user to override some defaults in user_config.h (#58) - * Fix Sonoff Pow low power (down to 4W) intermittent measurements (#123) - * - * 3.0.6 20161217 - * Fix MQTT_CLIENT_ID starting with % sign as in "%06X" (#142) - * Add auto power off after PulseTime * 0.1 Sec to relay 1 (#134) - * - * 3.0.5 20161215 - * Add more control over LED with command LedState options (#136, #143) - * LED_OFF (0), LED_POWER (1), LED_MQTTSUB (2), LED_POWER_MQTTSUB (3), LED_MQTTPUB (4), LED_POWER_MQTTPUB (5), LED_MQTT (6), LED_POWER_MQTT (7) - * Add option WIFI_RETRY (4) to command WifiConfig to allow connection retry to other AP without restart (#73) - * - * 3.0.4 20161211 - * Fix intermittent Domoticz update misses (#133) - * - * 3.0.3 20161210 - * Fix compiler warnings (#132) - * Remove redundant code - * Fix Domoticz pushbutton support - * - * 3.0.2 20161209 - * Add pushbutton to SwitchMode (#130) - * - * 3.0.1 20161209 - * Fix initial config - * - * 3.0.0 20161208 - * Migrate and clean-up flash layout - * Settings from version 2.x are saved but settings from version 3.x can not be used with version 2.x - * Change SEND_TELEMETRY_RSSI to SEND_TELEMETRY_WIFI and add AP and SSID to telemetry - * Split long JSON messages - * Fix inconsistent status messages - * Fix all status messages to return JSON if enabled - * Remove relay index in cmnd/sonoff//POWER now changed - * to cmnd/sonoff/POWER for single relay units - * and cmnd/sonoff/POWER for multi relay units like Sonoff dual - * Add retain option to Power/Light status controlled by command PowerRetain On|Off (#126) - * - * 2.1.2 20161204 - * Add support for second wifi AP (#73) - * Update command WifiConfig - * Fix possible WifiManager hang - * - * 2.1.1a 20161203 - * Fix scan for wifi networks if WeMo is enabled - * Fix syslog setting using web page - * - * 2.1.1 20161202 - * Add support for ElectroDragon second relay and button (only toggle with optional ButtonTopic) (#110) - * - * 2.1.0 20161202 - * Add optional EXPERIMENTAL TLS to MQTT (#49) - * Fix MQTT payload handling (#111) - * Optimzed WeMo code - * - * 2.0.21a 20161201 - * Fix WeMo PowerPlug emulation - * - * 2.0.21 20161130 - * Add Belkin WeMo PowerPlug emulation enabled with USE_WEMO_EMULATION in user_config.h (Heiko Krupp) (#105, #109) - * - * 2.0.20 20161130 - * Relax MQTTClient naming but only allows hexadecimal uppercase numbers (#107) - * Add I2C support with command I2CScan - * Add I2C sensor driver for HTU21 as alternate sensor using TH10/16 connectors (Heiko Krupp) (#105) - * Add I2C sensor driver for BMP085/BMP180/BMP280/BME280 as alternate sensor using TH10/16 connectors - * - * 2.0.19a 20161127 - * Add support for ButtonTopic and ButtonRetain to wall switch function - * Add pullup to SWITCH_PIN and command SwitchMode to syntax - * - * 2.0.18 20161126 - * Add SUB_PREFIX multi level support allowing 'cmnd' or 'cmnd/level2/level3' - * Add wall switch function to GPIO14 and command SwitchMode (Alex Scott) (#103) - * - * 2.0.17 20161123 - * Calibrate HLWPCAL from 12345 to 12530 - * Add alternative sensor driver DHT2 using Adafruit DHT library - * Add define MESSAGE_FORMAT to user_config.h - * Throttle console messages - * Shorten JSON messages - * Fix possible Panic - * Fix User mode webserver security - * - * 2.0.16 20161118 - * Add alternative sensor driver DS18x20 using OneWire library (#95) - * Change sensor MQTT message from tele/sonoff/TEMPERATURE to tele/sonoff/DHT/TEMPERATURE or - * tele/sonoff/DS18B20/TEMPERATURE or tele/sonoff/DS18x20/1/TEMPERATURE - * Add sensors to root webpage and auto refresh every 4 seconds (#92) - * Add optional JSON messageformat to all telemetry data - * Enforce minimum TelePeriod to be 10 seconds - * Fix Energy Yesterday reset after restart - * Add Energy Today restore after controlled restart - * - * 2.0.15 20161116 - * Change TODAY_POWER and PERIOD_POWER to TODAY_ENERGY and PERIOD_ENERGY - * Fix serial regression - * Fix syslog hangs when loghost is unavailable - * - * 2.0.14 20161115 - * Add HLW threshold delay - * Fix HLW intermittent current deviation - * Fix button functionality during wificonfig - * Add CRC check to DS18B20 sensor (#88) - * - * 2.0.13 20161113 - * Add additional upload error code descriptions - * Add PlatformIO support (#80) - * - * 2.0.12 20161113 - * Fix Serial and Web response regression when no MQTT connection available - * Fix Sonoff Dual power telemetric data for second relay - * Removed MQTT password from Information web page - * Hide MQTT password from Configure MQTT web page - * - * 2.0.11 20161111 - * Rewrite button and web toggle code - * Fix NTP sync - * Add HLW calibration commands HLWPCAL, HLWUCAL and HLWICAL (need define USE_POWERCALIBRATION) - * Fix power threshold tests - * - * 2.0.10 20161109 - * Add additional Domoticz define (#63) - * Add defines MQTT_STATUS_ON and MQTT_STATUS_OFF in user_config.h to select status On/Off string - * Fix status response differences (#65) - * Fix divide by zero exception (#70) - * Fix syslog loop exception - * - * 2.0.9 20161108 - * clarify MODULE in user_config.h - * Fix hlw false values - * - * 2.0.8 20161108 - * Add initial status after power on - * Seperate driver files - * Fix hlw code and calibrate Pow - * Move user config defines to user_config.h (#61) - * - * 2.0.7 20161030 - * Make Ticker mandatory - * Add Domoticz support (Increase MQTT_MAX_PACKET_SIZE to 400) (#54) - * Add command MessageFormat 0|1 to select either legacy or JSON output - * - * 2.0.6 20161024 - * Add Sonoff Pow power factor - * Initial support for up to four relays using iTEAD PSB (4Channel) - * - Currently only supports one button (All buttons behave the same) - * - Use command MODEL 4 to select four relay option - * (After first power on it will support 2 relays like Sonoff Dual) - * Fix ledstate - * Add command Status 9 to display Sonoff Pow thresholds - * Add commands PowerLow, PowerHigh, VoltageLow, VoltageHigh, CurrentLow and CurrentHigh for use - * with Sonoff Pow thresholds - * - * 2.0.5 20161018 - * Add updates to user_config.h - moved SEND_TELEMETRY_DS18B20 and SEND_TELEMETRY_DHT to module area. - * As Sonoff TH10/16 does not have the logic installed for GPIO04 You'll have to select ONE of both - * Add Sonoff Pow support (experimental until Pow tested) - * Add command Status 8 to display Sonoff Pow energy values - * Add command MqttUnits On|Off to add units to values - * Change web main page header character size - * Change On/Off to ON/OFF status messages to satisfy openHAB - * Change TEMP to TEMPERATURE and HUM to HUMIDITY - * - * 2.0.4 20161009 - * Add MQTT_BUTTON_RETAIN, SAVE_DATA and SAVE_STATE defines to user_config.h (#35) - * Update ButtonRetain to remove retained message(s) from broker when turned off - * Add Retain for second relay on Sonoff Dual - * Provide power status messages with device topic index if requested - * - * 2.0.3 20161008 - * Update wifi initialization - * Add command BUTTONRETAIN for optional MQTT retain on button press (#35) - * Add command SAVESTATE to disable power state save. May be used with MQTT retain - * - * 2.0.2 20161006 - * Fix wifi issue 2186 - * - * 2.0.1 20161002 - * Fix button press - * - * 2.0.0 20161002 - * Update Sonoff TH10/16 sensor pins (My TH10 only has GPIO14 connected) - * Add full support for Sonoff dual - * - * 1.0.35 20160929 - * Add more lines to console - * Add timeout and disable MQTT on web upload - * Add command SAVEDATA to control parameter save (for flash wear afficionados) (#30) - * - * 1.0.34 20160926 - * Fix button press six and seven - * Add more information to webserver - * - * 1.0.33 20160915 - * Better WPS error message - * Separate webserver code from support.ino into webserver.ino - * Fix webserver User by removing unwanted restart option - * - * 1.0.32 20160913 - * Add Wifi Protected Setup (WPS) as third option for initial config - * Add command WIFICONFIG replacing deprecated command SMARTCONFIG - * Add option WIFICONFIG 3 to start WPSconfig - * Add option WIFICONFIG 0 to start saved Wifi config tool (WPSconfig, Smartconfig or Wifimanager) - * Change button behaviour - See Wiki - * - * 1.0.31 20160907 - * Fix DS18B20 misread if teleperiod = 2 - * Tuned sensor code - * Updated prefered ElectroDragon connection to Relay 1 and Button 1 - * Moved SONOFF and ELECTRO_DRAGON port config to user_config.h - * - * 1.0.30 20160902 - * Fix command TELEPERIOD 0 - * Add ESP- tag to UDP log message for easy rsyslogd filtering - * Add ElectroDragon (Relay 2 only) functionality. Select with #define MODULE ELECTRO_DRAGON - * Add ? as null message alternative - * Add DHT temperature and humidity telemetry support. Enable with #define SEND_TELEMETRY_DHT - * Add DS18B20 temperature telemetry support. Enable with #define SEND_TELEMETRY_DS18B20 - * Restrict HOSTNAME, MQTTCLIENT, TOPIC and BUTTONTOPIC in topic mode only - * - * 1.0.29 20160831 - * Allow UPGRADE, OTAURL, RESTART, RESET, MQTTHOST, MQTTPORT, MQTTUSER, MQTTPASSWORD and WEBSERVER also in group mode - * - * 1.0.28 20160831 - * Add webserver state to status 5 - * Add optional PUB_PREFIX2 (tele) for telemetry usage - * Add command TELEPERIOD - * Fix syntax message - * Change memory status display - * - * 1.0.27 20160831 - * Add sketch flash size - * Add console to webserver - * Add command weblog - * Change WifiManager web pages to minimal - * Change display default hostname and MQTT client id in webserver - * Change HTTP command interface to http://sonoff-1234/cm?cmnd=light 2 - * Change HEARTBEAT to UPTIME - * - * 1.0.26 20160829 - * Add define USE_WEBSERVER to disable web server code in source - * Add file upload as alternative for ota upload to webserver - * Add information to webserver - * Add command hostname - * Add command logport - * Change HTTP command interface to http://sonoff-1234/cmd?cmnd=light 2 - * Change button behaviour with regards to Smartconfig and OTA upload. See README.md - * Enforce default hostname to either "%s-%04d" or user defined without any % - * Enforce default mqtt client id to either "DVES_%06X" or user defined without any % - * - * 1.0.25 20160822 - * Remove config system halts to keep ota available - * - * 1.0.24 20160821 - * Add test for MQTT_SUBTOPIC - * Change log range to LOG_LEVEL_ALL - * Change MQTT introduction messages - * Moved MQTT_MAX_PACKET_SIZE warning message to introduction messages - * - * 1.0.23 20160821 - * Add option USE_SPIFFS to move config from flash to spiffs - * Add webserver with options 0 (off), 1 (user) and 2 (admin) - * Add HTTP command interface (http://sonoff-1234/c?cmnd=light 2) - * Add wifimanager countdown counter - * Add command line webpage - * Add relay control to wifimanager - * Add restart option 99 to force restart - * Fix wifi hostname - * Fix NETBIOS hostname problem by reducing default hostname length - * Fix possible exception if WIFI_HOSTNAME is changed - * Fix upgrade messages - * Reduce memory use by redesigning config routines - * Split syntax message - * Rename define SERIAL_IO to USE_SERIAL - * - * 1.0.22 20160814 - * Add all MQTT parameters for configuration - * Add wifimanager to configure Wifi and MQTT via web server - * Change NTP time handling - * Fix Smartconfig parameter buffer overflow - * Fix PlatformIO warnings - * - * 1.0.21 20160808 - * Remove semaphore as subscription flooding (more than 15 subscriptions per second) is managed by SDK (LmacRxBlk:1) - * Add optional RTC interrupt (define USE_TICKER) to keep RTC synced during subscription flooding - * Remove heartbeatflag - * - * 1.0.20 20160805 - * Add semaphore to handle out of memory when too many subscriptions requested - * Use Daylight Saving (DST) parameters from user_config.h when timezone = 99 - * Add status 7 option displaying RTC information - * Add ledstate to status 0 - * - * 1.0.19 20160803 - * Fix possible MQTT_CLIENT_ID induced Exception(28) - * - * 1.0.18 20160803 - * Moved Cfg_Default - * Fix negative data handling - * Remove MQTT information from status 1 and add labels to status 1 - * Add mac address to status 5 - * Add MQTT ClientId, UserId and Password to status 6 - * - * 1.0.17 20160731 - * Better variable range checking - * Change ambiguous connection messages - * Add timestamp to serial message - * - * 1.0.16 20160729 - * Moved wifi, rtc, syslog and config to support.ino - * Fixed button action when buttontopic is used. Introduced with 1.0.15 - * Better buffer overflow checks (strlcpy) - * - * 1.0.15 20160728 - * Removed pubsubclient config changes from sonoff.ino as it doesn't work - * reapply MQTT_MAX_PACKET_SIZE 256 and MQTT_KEEPALIVE 120 to PubSubClient.h - * Add status 0 option displaying all status messages - * Change MQTT_MAX_PACKET_SIZE from 1024 to 256 - * Add buffer overflow checks (snprintf and strncpy) - * Implemented common string sizes - * - * 1.0.14 20160722 - * Seperate user config from sonoff.ino to user_config.h (pucebaboon) - * Change defaults from sidnas2 to domus1 - * Add MQTT status message as status 6 (pucebaboon) - * Add status type to message (pucebaboon) - * Add pubsubclient config changes to sonoff.ino (pucebaboon) - * - * 1.0.13 20160702 - * Add Ledstate 1 option to show power state on led - * - * 1.0.12 20160529 - * Allow disable of button topic using "0" - * - * 1.0.11 20160524 - * Provide button response if MQTT connection lost - * - * 1.0.10 20160520 - * Add optional button topic to assist external MQTT clients - * Change version notation - * Reset default values - * - * 1.0.9 20160503 - * Add more blinks - * Add reset 2 option erasing flash - * Add status 5 option displaying network info - * Add syslog check for Wifi connection - * Resize mqtt_publish log array - * Change Wifi smartconfig active from 100 to 60 seconds - * Update Wifi initialization - * - * 1.0.8 20160430 - * Remove use of Wifi config data from SDK - * Add status 3 (syslog info) and status 4 (flash info) - * Add restart option to button (5 quick presses) - * - * 1.0.7 20160420 - * Add UDP syslog support - * Change HOST command to MQTTHOST command - * Add commands SYSLOG, SERIALLOG and LOGHOST - * Change hostname to lower case to distinguise between open-sdk version - * Add support for ESP-12F used in my modified wkaku power socket switch - * Fix timezone command - * Add RTC month names for future use - * Modify button code - * Remove initialization errors by better use of MQTT loop - * - * 1.0.6 20160406 - * Removed Wifi AP mode (#1) - * Add test for Arduino IDE version >= 1.6.8 - * Fix RTC time sync code - * - * 1.0.5 20160310 - * Initial public release - * Show debug info by selecting option from IDE Tools Debug port: Serial - */