diff --git a/README.md b/README.md
index b8790513a..b6ec1f962 100644
--- a/README.md
+++ b/README.md
@@ -1,7 +1,7 @@
 ## Sonoff-Tasmota
 Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.
 
-Current version is **5.6.1d** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/master/sonoff/_releasenotes.ino) for change information.
+Current version is **5.6.1e** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/master/sonoff/_releasenotes.ino) for change information.
 
 ### ATTENTION All versions
 
diff --git a/sonoff/_releasenotes.ino b/sonoff/_releasenotes.ino
index 634c74085..6a51ad3a8 100644
--- a/sonoff/_releasenotes.ino
+++ b/sonoff/_releasenotes.ino
@@ -1,4 +1,7 @@
-/* 5.6.1d
+/* 5.6.1e
+ * Remove Sonoff Pow HLW power timer to enable low power readings. Unstable below 3W due to used hardware. (#759)
+ *
+ * 5.6.1d
  * Fix settings order during startup to allow for displaying debug messages
  * Add more Sonoff Pow range checking (#772)
  *
diff --git a/sonoff/sonoff.ino b/sonoff/sonoff.ino
index 0fc4d27c7..b87477e98 100644
--- a/sonoff/sonoff.ino
+++ b/sonoff/sonoff.ino
@@ -25,7 +25,7 @@
     - Select IDE Tools - Flash Size: "1M (no SPIFFS)"
   ====================================================*/
 
-#define VERSION                0x05060104  // 5.6.1d
+#define VERSION                0x05060105  // 5.6.1e
 
 enum log_t   {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE, LOG_LEVEL_ALL};
 enum week_t  {Last, First, Second, Third, Fourth};
diff --git a/sonoff/xsns_hlw8012.ino b/sonoff/xsns_hlw8012.ino
index db08708d3..ce8311059 100644
--- a/sonoff/xsns_hlw8012.ino
+++ b/sonoff/xsns_hlw8012.ino
@@ -48,7 +48,6 @@ byte hlw_mkwh_state = 0;
 #endif  // FEATURE_POWER_LIMIT
 
 byte hlw_SELflag;
-byte hlw_cf_timer;
 byte hlw_cf1_timer;
 byte hlw_fifth_second;
 byte hlw_startup;
@@ -79,10 +78,6 @@ void hlw_cf_interrupt()  // Service Power
 {
   hlw_cf_plen = micros() - hlw_cf_last;
   hlw_cf_last = micros();
-  if (hlw_cf_plen > 4000000) {  // 4 seconds
-    hlw_cf_plen = 0;  // Just powered on
-  }
-  hlw_cf_timer = 15;  // Support down to 4W which takes about 3 seconds
   hlw_EDcntr++;
   hlw_Ecntr++;
 }
@@ -138,13 +133,6 @@ void hlw_200mS()
     }
   }
 
-  if (hlw_cf_timer) {
-    hlw_cf_timer--;
-    if (!hlw_cf_timer) {
-      hlw_cf_plen = 0;  // No load for over 3 seconds
-    }
-  }
-  
   hlw_cf1_timer++;
   if (hlw_cf1_timer >= 8) {
     hlw_cf1_timer = 0;
@@ -193,6 +181,9 @@ void hlw_readEnergy(byte option, float &et, float &ed, float &e, float &w, float
 //snprintf_P(log, sizeof(log), PSTR("HLW: CF %d, CF1U %d (%d), CF1I %d (%d)"), hlw_cf_plen, hlw_cf1u_plen, hlw_cf1u_pcntmax, hlw_cf1i_plen, hlw_cf1i_pcntmax);
 //addLog(LOG_LEVEL_DEBUG, log);
 
+  if (!(power &1)) {
+    hlw_cf_plen = 0;  // Powered off
+  }
   et = (float)(rtcMem.hlw_kWhtotal + (cur_kWhtoday / 1000)) / 100000;
   ed = 0;
   if (cur_kWhtoday) {
@@ -224,7 +215,7 @@ void hlw_readEnergy(byte option, float &et, float &ed, float &e, float &w, float
     w = (float)hlw_w / 10;
   }
   u = 0;
-  if (hlw_cf1u_plen && (w || (power &1))) {
+  if (hlw_cf1u_plen && w) {
     hlw_u = (HLW_UREF * sysCfg.hlw_ucal) / hlw_cf1u_plen;
     u = (float)hlw_u / 10;
   }
@@ -276,7 +267,6 @@ void hlw_init()
   hlw_startup = 1;
   hlw_lasttime = 0;
   hlw_fifth_second = 0;
-  hlw_cf_timer = 0;
   hlw_cf1_timer = 0;
   tickerHLW.attach_ms(200, hlw_200mS);
 }