Update from Tasmota

Update from Tasmota

sonoff/_releasenotes.ino

@@ -1,5 +1,5 @@
 /* 5.14.0a
- * Updated to latest release
+ * Add Eastron SDM630 energy meter (#2735)
  *
  * 5.14.0 20180515
  * Update language files

sonoff/language/bg-BG.h

@@ -28,7 +28,7 @@
  * Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
  * Use online command Prefix to translate cmnd, stat and tele.
  *
- * Updated until v5.13.1c
+ * Updated until v5.14.0
 \*********************************************************************/
 
 //#define LANGUAGE_MODULE_NAME         // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/cs-CZ.h

@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/de-DE.h

@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/el-GR.h

@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/en-GB.h

@@ -28,7 +28,7 @@
  * Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
  * Use online command Prefix to translate cmnd, stat and tele.
  *
- * Updated until v5.12.0n
+ * Updated until v5.14.0
 \*********************************************************************/
 
 //#define LANGUAGE_MODULE_NAME         // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/es-AR.h

@@ -28,7 +28,7 @@
  * Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
  * Use online command Prefix to translate cmnd, stat and tele.
  *
- * Updated until v5.13.1c
+ * Updated until v5.14.0
 \*********************************************************************/
 
 #define LANGUAGE_MODULE_NAME         // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/fr-FR.h

@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/hu-HU.h

@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/it-IT.h

@@ -28,7 +28,7 @@
  * Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
  * Use online command Prefix to translate cmnd, stat and tele.
  *
- * Updated until v5.13.1a
+ * Updated until v5.14.0
 \*********************************************************************/
 
 #define LANGUAGE_MODULE_NAME         // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/nl-NL.h

@@ -28,7 +28,7 @@
  * Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
  * Use online command Prefix to translate cmnd, stat and tele.
  *
- * Updated until v5.13.1c
+ * Updated until v5.14.0
 \*********************************************************************/
 
 //#define LANGUAGE_MODULE_NAME         // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/pl-PL.h

@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/pt-BR.h

@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/pt-PT.h

@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "A"

sonoff/language/ru-RU.h

@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "А"

sonoff/language/zh-CN.h

@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "安"

sonoff/language/zh-TW.h

@@ -462,6 +462,8 @@
 #define D_SENSOR_SR04_ECHO "SR04 Ech"
 #define D_SENSOR_SDM120_TX "SDM120 Tx"
 #define D_SENSOR_SDM120_RX "SDM120 Rx"
+#define D_SENSOR_SDM630_TX "SDM630 Tx"
+#define D_SENSOR_SDM630_RX "SDM630 Rx"
 
 // Units
 #define D_UNIT_AMPERE "安"

sonoff/sonoff_template.h

@@ -95,6 +95,8 @@ enum UserSelectablePins {
   GPIO_SR04_ECHO,      // SR04 Echo pin
   GPIO_SDM120_TX,      // SDM120 Serial interface
   GPIO_SDM120_RX,      // SDM120 Serial interface
+  GPIO_SDM630_TX,      // SDM630 Serial interface
+  GPIO_SDM630_RX,      // SDM630 Serial interface
   GPIO_SENSOR_END };
 
 // Programmer selectable GPIO functionality offset by user selectable GPIOs
@@ -139,7 +141,8 @@ const char kSensorNames[] PROGMEM =
   D_SENSOR_PMS5003 "|" D_SENSOR_SDS0X1 "|"
   D_SENSOR_SBR_TX "|" D_SENSOR_SBR_RX "|"
   D_SENSOR_SR04_TRIG "|" D_SENSOR_SR04_ECHO "|"
-  D_SENSOR_SDM120_TX "|" D_SENSOR_SDM120_RX;
+  D_SENSOR_SDM120_TX "|" D_SENSOR_SDM120_RX "|"
+  D_SENSOR_SDM630_TX "|" D_SENSOR_SDM630_RX;
 
 /********************************************************************************************/
 

sonoff/user_config.h

@@ -293,6 +293,8 @@
 #define USE_SERIAL_BRIDGE                        // Add support for software Serial Bridge (+0k8 code)
 //#define USE_SDM120                               // Add support for Eastron SDM120-Modbus energy meter (+1k7 code)
   #define SDM120_SPEED         9600              // SDM120-Modbus RS485 serial speed (default: 2400 baud)
+#define USE_SDM630                               // Add support for Eastron SDM630-Modbus energy meter (+2k code)
+  #define SDM630_SPEED         9600              // SDM630-Modbus RS485 serial speed (default: 9600 baud)
 
 // -- Low level interface devices -----------------
 //#define USE_IR_REMOTE                            // Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)

sonoff/xsns_25_sdm630.ino

@@ -0,0 +1,355 @@
+/*
+  xsns_25_sdm630.ino - Eastron SDM630-Modbus energy meter support for Sonoff-Tasmota
+
+  Copyright (C) 2018  Gennaro Tortone
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 3 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifdef USE_SDM630
+
+/*********************************************************************************************\
+ * Eastron SDM630-Modbus energy meter
+ *
+ * Based on: https://github.com/reaper7/SDM_Energy_Meter
+\*********************************************************************************************/
+
+#include <TasmotaSerial.h>
+
+TasmotaSerial *SDM630Serial;
+
+uint8_t sdm630_type = 1;
+uint8_t sdm630_state = 0;
+
+float sdm630_voltage[] = {0,0,0};
+float sdm630_current[] = {0,0,0};
+float sdm630_active_power[] = {0,0,0};
+float sdm630_reactive_power[] = {0,0,0};
+float sdm630_power_factor[] = {0,0,0};
+float sdm630_energy_total = 0;
+
+bool SDM630_ModbusReceiveReady()
+{
+  return (SDM630Serial->available() > 1);
+}
+
+void SDM630_ModbusSend(uint8_t function_code, uint16_t start_address, uint16_t register_count)
+{
+  uint8_t frame[8];
+
+  frame[0] = 0x01;          // default SDM630 Modbus address
+  frame[1] = function_code;
+  frame[2] = (uint8_t)(start_address >> 8);
+  frame[3] = (uint8_t)(start_address);
+  frame[4] = (uint8_t)(register_count >> 8);
+  frame[5] = (uint8_t)(register_count);
+
+  uint16_t crc = SDM630_calculateCRC(frame, 6);  // calculate out crc only from first 6 bytes
+  frame[6] = lowByte(crc);
+  frame[7] = highByte(crc);
+
+  while (SDM630Serial->available() > 0)  {  // read serial if any old data is available
+    SDM630Serial->read();
+  }
+
+  SDM630Serial->flush();
+  SDM630Serial->write(frame, sizeof(frame));
+}
+
+uint8_t SDM630_ModbusReceive(float *value)
+{
+  uint8_t buffer[9];
+
+  *value = NAN;
+  uint8_t len = 0;
+  while (SDM630Serial->available() > 0) {
+    buffer[len++] = (uint8_t)SDM630Serial->read();
+  }
+
+  if (len < 9)
+    return 3;   // SDM_ERR_NOT_ENOUGHT_BYTES
+
+  if (len == 9) {
+
+    if (buffer[0] == 0x01 && buffer[1] == 0x04 && buffer[2] == 4) {   // check node number, op code and reply bytes count
+
+      if((SDM630_calculateCRC(buffer, 7)) == ((buffer[8] << 8) | buffer[7])) {  //calculate crc from first 7 bytes and compare with received crc (bytes 7 & 8)
+
+        ((uint8_t*)value)[3] = buffer[3];
+        ((uint8_t*)value)[2] = buffer[4];
+        ((uint8_t*)value)[1] = buffer[5];
+        ((uint8_t*)value)[0] = buffer[6];
+
+      } else return 1; // SDM_ERR_CRC_ERROR
+
+    } else return 2;  // SDM_ERR_WRONG_BYTES
+  }
+
+  return 0;   // SDM_ERR_NO_ERROR
+}
+
+uint16_t SDM630_calculateCRC(uint8_t *frame, uint8_t num)
+{
+  uint16_t crc, flag;
+  crc = 0xFFFF;
+  for (uint8_t i = 0; i < num; i++) {
+    crc ^= frame[i];
+    for (uint8_t j = 8; j; j--) {
+      if ((crc & 0x0001) != 0) {        // If the LSB is set
+        crc >>= 1;                      // Shift right and XOR 0xA001
+        crc ^= 0xA001;
+      } else {                          // Else LSB is not set
+        crc >>= 1;                      // Just shift right
+      }
+    }
+  }
+  return crc;
+}
+
+/*********************************************************************************************/
+
+const uint16_t sdm630_start_addresses[] {
+  0x0000, // L1 - SDM630_VOLTAGE [V]
+  0x0002, // L2 - SDM630_VOLTAGE [V]
+  0x0004, // L3 - SDM630_VOLTAGE [V]
+  0x0006, // L1 - SDM630_CURRENT [A]
+  0x0008, // L2 - SDM630_CURRENT [A]
+  0x000A, // L3 - SDM630_CURRENT [A]
+  0x000C, // L1 - SDM630_POWER [W]
+  0x000E, // L2 - SDM630_POWER [W]
+  0x0010, // L3 - SDM630_POWER [W]
+  0x0018, // L1 - SDM630_REACTIVE_POWER [VAR]
+  0x001A, // L2 - SDM630_REACTIVE_POWER [VAR]
+  0x001C, // L3 - SDM630_REACTIVE_POWER [VAR]
+  0x001E, // L1 - SDM630_POWER_FACTOR
+  0x0020, // L2 - SDM630_POWER_FACTOR
+  0x0022, // L3 - SDM630_POWER_FACTOR
+  0x0156 // Total - SDM630_TOTAL_ACTIVE_ENERGY [Wh]
+};
+
+uint8_t sdm630_read_state = 0;
+uint8_t sdm630_send_retry = 0;
+
+void SDM63050ms()              // Every 50 mSec
+{
+  sdm630_state++;
+  if (6 == sdm630_state) {     // Every 300 mSec
+    sdm630_state = 0;
+
+    float value = 0;
+    bool data_ready = SDM630_ModbusReceiveReady();
+
+    if (data_ready) {
+      uint8_t error = SDM630_ModbusReceive(&value);
+      if (error) {
+        snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DEBUG "SDM630 response error %d"), error);
+        AddLog(LOG_LEVEL_DEBUG);
+      } else {
+        switch(sdm630_read_state) {
+          case 0:
+            sdm630_voltage[0] = value;
+            break;
+
+          case 1:
+            sdm630_voltage[1] = value;
+            break;
+
+          case 2:
+            sdm630_voltage[2] = value;
+            break;
+
+          case 3:
+            sdm630_current[0] = value;
+            break;
+
+          case 4:
+            sdm630_current[1] = value;
+            break;
+
+          case 5:
+            sdm630_current[2] = value;
+            break;
+
+          case 6:
+            sdm630_active_power[0] = value;
+            break;
+
+          case 7:
+            sdm630_active_power[1] = value;
+            break;
+
+          case 8:
+            sdm630_active_power[2] = value;
+            break;
+
+          case 9:
+            sdm630_reactive_power[0] = value;
+            break;
+
+          case 10:
+            sdm630_reactive_power[1] = value;
+            break;
+
+          case 11:
+            sdm630_reactive_power[2] = value;
+            break;
+
+          case 12:
+            sdm630_power_factor[0] = value;
+            break;
+
+          case 13:
+            sdm630_power_factor[1] = value;
+            break;
+
+          case 14:
+            sdm630_power_factor[2] = value;
+            break;
+
+          case 15:
+            sdm630_energy_total = value;
+            break;
+        } // end switch
+
+        sdm630_read_state++;
+
+        if (sizeof(sdm630_start_addresses)/2 == sdm630_read_state) {
+          sdm630_read_state = 0;
+        }
+      }
+    } // end data ready
+
+    if (0 == sdm630_send_retry || data_ready) {
+      sdm630_send_retry = 5;
+       SDM630_ModbusSend(0x04, sdm630_start_addresses[sdm630_read_state], 2);
+    } else {
+      sdm630_send_retry--;
+    }
+  } // end 300 ms
+}
+
+void SDM630Init()
+{
+  sdm630_type = 0;
+  if ((pin[GPIO_SDM630_RX] < 99) && (pin[GPIO_SDM630_TX] < 99)) {
+    SDM630Serial = new TasmotaSerial(pin[GPIO_SDM630_RX], pin[GPIO_SDM630_TX], 1);
+#ifdef SDM630_SPEED
+    if (SDM630Serial->begin(SDM630_SPEED)) {
+#else
+    if (SDM630Serial->begin(2400)) {
+#endif
+      if (SDM630Serial->hardwareSerial()) { ClaimSerial(); }
+      sdm630_type = 1;
+    }
+  }
+}
+
+#ifdef USE_WEBSERVER
+const char HTTP_SNS_SDM630_DATA[] PROGMEM = "%s"
+  "{s}SDM630 " D_VOLTAGE "{m}%s/%s/%s " D_UNIT_VOLT "{e}"
+  "{s}SDM630 " D_CURRENT "{m}%s/%s/%s " D_UNIT_AMPERE "{e}"
+  "{s}SDM630 " D_POWERUSAGE_ACTIVE "{m}%s/%s/%s " D_UNIT_WATT "{e}"
+  "{s}SDM630 " D_POWERUSAGE_REACTIVE "{m}%s/%s/%s " D_UNIT_VAR "{e}"
+  "{s}SDM630 " D_POWER_FACTOR "{m}%s/%s/%s{e}"
+  "{s}SDM630 " D_ENERGY_TOTAL "{m}%s " D_UNIT_KILOWATTHOUR "{e}";
+#endif  // USE_WEBSERVER
+
+void SDM630Show(boolean json)
+{
+  char voltage_l1[10];
+  char voltage_l2[10];
+  char voltage_l3[10];
+  char current_l1[10];
+  char current_l2[10];
+  char current_l3[10];
+  char active_power_l1[10];
+  char active_power_l2[10];
+  char active_power_l3[10];
+  char reactive_power_l1[10];
+  char reactive_power_l2[10];
+  char reactive_power_l3[10];
+  char power_factor_l1[10];
+  char power_factor_l2[10];
+  char power_factor_l3[10];
+  char energy_total[10];
+
+  dtostrfd(sdm630_voltage[0], Settings.flag2.voltage_resolution, voltage_l1);
+  dtostrfd(sdm630_voltage[1], Settings.flag2.voltage_resolution, voltage_l2);
+  dtostrfd(sdm630_voltage[2], Settings.flag2.voltage_resolution, voltage_l3);
+  dtostrfd(sdm630_current[0], Settings.flag2.current_resolution, current_l1);
+  dtostrfd(sdm630_current[1], Settings.flag2.current_resolution, current_l2);
+  dtostrfd(sdm630_current[2], Settings.flag2.current_resolution, current_l3);
+  dtostrfd(sdm630_active_power[0], Settings.flag2.wattage_resolution, active_power_l1);
+  dtostrfd(sdm630_active_power[1], Settings.flag2.wattage_resolution, active_power_l2);
+  dtostrfd(sdm630_active_power[2], Settings.flag2.wattage_resolution, active_power_l3);
+  dtostrfd(sdm630_reactive_power[0], Settings.flag2.wattage_resolution, reactive_power_l1);
+  dtostrfd(sdm630_reactive_power[1], Settings.flag2.wattage_resolution, reactive_power_l2);
+  dtostrfd(sdm630_reactive_power[2], Settings.flag2.wattage_resolution, reactive_power_l3);
+  dtostrfd(sdm630_power_factor[0], 2, power_factor_l1);
+  dtostrfd(sdm630_power_factor[1], 2, power_factor_l2);
+  dtostrfd(sdm630_power_factor[2], 2, power_factor_l3);
+  dtostrfd(sdm630_energy_total, Settings.flag2.energy_resolution, energy_total);
+
+  if (json) {
+    snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"" D_RSLT_ENERGY "\":{\"" D_JSON_TOTAL "\":%s,\""
+      D_JSON_ACTIVE_POWERUSAGE "\":[%s,%s,%s],\"" D_JSON_REACTIVE_POWERUSAGE "\":[%s,%s,%s],\""
+      D_JSON_POWERFACTOR "\":[%s,%s,%s],\"" D_JSON_VOLTAGE "\":[%s,%s,%s],\"" D_JSON_CURRENT "\":[%s,%s,%s]}"),
+      mqtt_data, energy_total, active_power_l1, active_power_l2, active_power_l3,
+      reactive_power_l1, reactive_power_l2, reactive_power_l3,
+      power_factor_l1, power_factor_l2, power_factor_l3,
+      voltage_l1, voltage_l2, voltage_l3,
+      current_l1, current_l2, current_l3);
+#ifdef USE_WEBSERVER
+  } else {
+    snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_SDM630_DATA, mqtt_data,
+    voltage_l1, voltage_l2, voltage_l3, current_l1, current_l2, current_l3,
+    active_power_l1, active_power_l2, active_power_l3,
+    reactive_power_l1, reactive_power_l2, reactive_power_l3,
+    power_factor_l1, power_factor_l2, power_factor_l3, energy_total);
+  }
+#endif  // USE_WEBSERVER
+}
+
+/*********************************************************************************************\
+ * Interface
+\*********************************************************************************************/
+
+#define XSNS_25
+
+boolean Xsns25(byte function)
+{
+  boolean result = false;
+
+  if (sdm630_type) {
+    switch (function) {
+      case FUNC_INIT:
+        SDM630Init();
+        break;
+      case FUNC_EVERY_50_MSECOND:
+        SDM63050ms();
+        break;
+      case FUNC_JSON_APPEND:
+        SDM630Show(1);
+        break;
+#ifdef USE_WEBSERVER
+      case FUNC_WEB_APPEND:
+        SDM630Show(0);
+        break;
+#endif  // USE_WEBSERVER
+    }
+  }
+  return result;
+}
+
+#endif