From 76f29481896ba977abdd17a84b3c48c0ffb6c071 Mon Sep 17 00:00:00 2001
From: Norbert Richter <norbert.richter@prsolution.eu>
Date: Sat, 30 Jan 2021 09:09:10 +0100
Subject: [PATCH] Add Sensor83 TakeOver cmnd

---
 tasmota/xsns_83_neopool.ino | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/tasmota/xsns_83_neopool.ino b/tasmota/xsns_83_neopool.ino
index 769b8ef82..048ee04d6 100644
--- a/tasmota/xsns_83_neopool.ino
+++ b/tasmota/xsns_83_neopool.ino
@@ -94,6 +94,7 @@ enum NeoPoolRegister {
 
   // GLOBAL page (0x02xx)
   MBF_SAVE_TO_EEPROM=0x02F0,          // 0x02F0        A write operation to this register starts a EEPROM storage operation immediately. During the EEPROM storage procedure, the system may be unresponsive to MODBUS requests. The operation will last always less than 1 second.
+  MBF_IMM_TAKE_OVER=0x02F5,           // 0x02F5        undocumented - immediately tale over - a write operation to this register take over the previous written data (neccessary if changing e.g. timers)
 
   // FACTORY page (0x03xx)
   MBF_PAR_VERSION=0x0300,             // 0x0300*       Software version of the PowerBox (unused)
@@ -1118,6 +1119,9 @@ void NeoPoolShow(bool json)
  * Sensor83 99
  *            write data permanent into flash
  *
+ * Sensor83 100
+ *            immediately take over data to running firmware
+ *
  *
  * Examples:
  *
@@ -1167,6 +1171,7 @@ void NeoPoolShow(bool json)
 #define NEOPOOL_CMND_WRITE_REG32      22
 #define NEOPOOL_CMND_READ_REG_HEX32   26
 #define NEOPOOL_CMND_SAVE_TO_EEPROM   99
+#define NEOPOOL_CMND_IMM_TAKE_OVER   100
 
 #define NEOPOOL_CMND_SENSOR D_CMND_SENSOR STR(XSNS_83)
 
@@ -1341,6 +1346,14 @@ bool NeoPoolCmnd(void)
         }
         break;
 
+    case NEOPOOL_CMND_IMM_TAKE_OVER:
+        addr = MBF_IMM_TAKE_OVER;
+        if (0 == params_cnt) {
+          data[0] = 1;
+          serviced = (NEOPOOL_OK == NeoPoolWriteRegister(addr, data, 1));
+        }
+        break;
+
     default:
       AddLog_P(LOG_LEVEL_DEBUG, PSTR("NEO: Unknown " NEOPOOL_CMND_SENSOR " cmnd %d"), cmnd);
       break;