Merge pull request #7917 from tiagofreire-pt/patch-1

Translations for xsns_53_sml.ino (en-GB, de-DE and pt-PT)

tasmota/language/bg-BG.h

@@ -643,6 +643,26 @@
 #define D_SENSOR_CC1101_GDO2   "CC1101 GDO2"
 #define D_SENSOR_HRXL_RX       "HRXL Rx"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // Units
 #define D_UNIT_AMPERE "A"
 #define D_UNIT_CENTIMETER "cm"

tasmota/language/cs-CZ.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "J"
 #define D_TX20_WEST "Z"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Není"
 #define D_SENSOR_USER          "User"

tasmota/language/de-DE.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Verbrauch"
+#define D_TPWROUT "Einspeisung"
+#define D_TPWRCURR "Aktueller Verbrauch"
+#define D_TPWRCURR1 "Verbrauch P1"
+#define D_TPWRCURR2 "Verbrauch P2"
+#define D_TPWRCURR3 "Verbrauch P3"
+#define D_Strom_L1 "Strom L1"
+#define D_Strom_L2 "Strom L2"
+#define D_Strom_L3 "Strom L3"
+#define D_Spannung_L1 "Spannung L1"
+#define D_Spannung_L2 "Spannung L2"
+#define D_Spannung_L3 "Spannung L3"
+#define D_METERNR "Zähler Nr"
+#define D_METERSID "Service ID"
+#define D_GasIN "Zählerstand"                // Gas-Verbrauch
+#define D_H2oIN "Zählerstand"                // H2o-Verbrauch
+#define D_StL1L2L3 "Ströme L1+L2+L3"
+#define D_SpL1L2L3 "Spannung L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "None"
 #define D_SENSOR_USER          "User"

tasmota/language/el-GR.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "Ν"
 #define D_TX20_WEST "Δ"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Κανένα"
 #define D_SENSOR_USER          "User"

tasmota/language/en-GB.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"                // Gas-Verbrauch
+#define D_H2oIN "Counter"                // H2o-Verbrauch
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "None"
 #define D_SENSOR_USER          "User"

tasmota/language/es-ES.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "O"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total de Entrada"
+#define D_TPWROUT "Total de Salida"
+#define D_TPWRCURR "Corriente-En/Sal"
+#define D_TPWRCURR1 "Corriente-Entr p1"
+#define D_TPWRCURR2 "Corriente-Entr p2"
+#define D_TPWRCURR3 "Corriente-Entr p3"
+#define D_Strom_L1 "Corriente L1"
+#define D_Strom_L2 "Corriente L2"
+#define D_Strom_L3 "Corriente L3"
+#define D_Spannung_L1 "Voltaje L1"
+#define D_Spannung_L2 "Voltaje L2"
+#define D_Spannung_L3 "Voltaje L3"
+#define D_METERNR "Número de Medidor"
+#define D_METERSID "ID de Servicio"
+#define D_GasIN "Contador"
+#define D_H2oIN "Contador"
+#define D_StL1L2L3 "Corriente L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Ninguno"
 #define D_SENSOR_USER          "Por Usuario"

tasmota/language/fr-FR.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "O"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Aucun"
 #define D_SENSOR_USER          "Utilisateur"

tasmota/language/he-HE.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "None"
 #define D_SENSOR_USER          "משתמש"

tasmota/language/hu-HU.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "D"
 #define D_TX20_WEST "NY"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Nincs"
 #define D_SENSOR_USER          "User"

tasmota/language/it-IT.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "O"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Nessuno"
 #define D_SENSOR_USER          "User"

tasmota/language/ko-KO.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "없음"
 #define D_SENSOR_USER          "User"

tasmota/language/nl-NL.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Geen"
 #define D_SENSOR_USER          "Gebruiker"

tasmota/language/pl-PL.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Brak"
 #define D_SENSOR_USER          "Użytkownik"

tasmota/language/pt-BR.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "O"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Nenhum"
 #define D_SENSOR_USER          "User"

tasmota/language/pt-PT.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "O"
 
+//xsns_53_sml.ino 
+#define D_TPWRIN "Total-Consumo"
+#define D_TPWROUT "Total-Geração"
+#define D_TPWRCURR "Corrente-Consumo/Geração"
+#define D_TPWRCURR1 "Corrente-Consumo F1"
+#define D_TPWRCURR2 "Corrente-Consumo F2"
+#define D_TPWRCURR3 "Corrente-Consumo F3"
+#define D_Strom_L1 "Corrente F1"
+#define D_Strom_L2 "Corrente F2"
+#define D_Strom_L3 "Corrente F3"
+#define D_Spannung_L1 "Tensão F1"
+#define D_Spannung_L2 "Tensão F2"
+#define D_Spannung_L3 "Tensão F3"
+#define D_METERNR "Número_Contador"
+#define D_METERSID "ID Serviço"
+#define D_GasIN "Contador" 
+#define D_H2oIN "Contador"
+#define D_StL1L2L3 "Corrente F1+F2+F3"
+#define D_SpL1L2L3 "Tensão F1+F2+F3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Nenhum"
 #define D_SENSOR_USER          "User"

tasmota/language/ro-RO.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "V"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Fără"
 #define D_SENSOR_USER          "Utilizator"

tasmota/language/ru-RU.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "-нет-"
 #define D_SENSOR_USER          "User"

tasmota/language/sk-SK.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "J"
 #define D_TX20_WEST "Z"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Žiaden"
 #define D_SENSOR_USER          "User"

tasmota/language/sv-SE.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "V"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Ingen"
 #define D_SENSOR_USER          "User"

tasmota/language/tr-TR.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "None"
 #define D_SENSOR_USER          "User"

tasmota/language/uk-UA.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "Пд"
 #define D_TX20_WEST "Зх"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "Немає"
 #define D_SENSOR_USER          "Користувач"

tasmota/language/zh-CN.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "南"
 #define D_TX20_WEST "西"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "无"
 #define D_SENSOR_USER          "User"

tasmota/language/zh-TW.h

@@ -512,6 +512,26 @@
 #define D_TX20_SOUTH "S"
 #define D_TX20_WEST "W"
 
+// xsns_53_sml.ino 
+#define D_TPWRIN "Total-In"
+#define D_TPWROUT "Total-Out"
+#define D_TPWRCURR "Current-In/Out"
+#define D_TPWRCURR1 "Current-In p1"
+#define D_TPWRCURR2 "Current-In p2"
+#define D_TPWRCURR3 "Current-In p3"
+#define D_Strom_L1 "Current L1"
+#define D_Strom_L2 "Current L2"
+#define D_Strom_L3 "Current L3"
+#define D_Spannung_L1 "Voltage L1"
+#define D_Spannung_L2 "Voltage L2"
+#define D_Spannung_L3 "Voltage L3"
+#define D_METERNR "Meter_number"
+#define D_METERSID "Service ID"
+#define D_GasIN "Counter"
+#define D_H2oIN "Counter"
+#define D_StL1L2L3 "Current L1+L2+L3"
+#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
+
 // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
 #define D_SENSOR_NONE          "None"
 #define D_SENSOR_USER          "User"

tasmota/xsns_53_sml.ino

@@ -50,70 +50,6 @@
 // addresses a bug in meter DWS74
 //#define DWS74_BUG
 
-// max 23 chars
-#if MY_LANGUAGE==de-DE
-// german web text
-#define D_TPWRIN "Verbrauch"
-#define D_TPWROUT "Einspeisung"
-#define D_TPWRCURR "Aktueller Verbrauch"
-#define D_TPWRCURR1 "Verbrauch P1"
-#define D_TPWRCURR2 "Verbrauch P2"
-#define D_TPWRCURR3 "Verbrauch P3"
-#define D_Strom_L1 "Strom L1"
-#define D_Strom_L2 "Strom L2"
-#define D_Strom_L3 "Strom L3"
-#define D_Spannung_L1 "Spannung L1"
-#define D_Spannung_L2 "Spannung L2"
-#define D_Spannung_L3 "Spannung L3"
-#define D_METERNR "Zähler Nr"
-#define D_METERSID "Service ID"
-#define D_GasIN "Zählerstand"                // Gas-Verbrauch
-#define D_H2oIN "Zählerstand"                // H2o-Verbrauch
-#define D_StL1L2L3 "Ströme L1+L2+L3"
-#define D_SpL1L2L3 "Spannung L1+L2+L3/3"
-
-#else
-// other languages (tbd)
-#undef D_TPWRIN
-#undef D_TPWROUT
-#undef D_TPWRCURR
-#undef D_TPWRCURR1
-#undef D_TPWRCURR2
-#undef D_TPWRCURR3
-#undef D_Strom_L1
-#undef D_Strom_L2
-#undef D_Strom_L3
-#undef D_Spannung_L1
-#undef D_Spannung_L2
-#undef D_Spannung_L3
-#undef D_METERNR
-#undef D_METERSID
-#undef D_GasIN
-#undef D_H2oIN
-#undef D_StL1L2L3
-#undef D_SpL1L2L3
-
-#define D_TPWRIN "Total-In"
-#define D_TPWROUT "Total-Out"
-#define D_TPWRCURR "Current-In/Out"
-#define D_TPWRCURR1 "Current-In p1"
-#define D_TPWRCURR2 "Current-In p2"
-#define D_TPWRCURR3 "Current-In p3"
-#define D_Strom_L1 "Current L1"
-#define D_Strom_L2 "Current L2"
-#define D_Strom_L3 "Current L3"
-#define D_Spannung_L1 "Voltage L1"
-#define D_Spannung_L2 "Voltage L2"
-#define D_Spannung_L3 "Voltage L3"
-#define D_METERNR "Meter_number"
-#define D_METERSID "Service ID"
-#define D_GasIN "Counter"                // Gas-Verbrauch
-#define D_H2oIN "Counter"                // H2o-Verbrauch
-#define D_StL1L2L3 "Current L1+L2+L3"
-#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
-
-#endif
-
 // JSON Strings do not translate
 // max 23 char
 #define DJ_TPWRIN "Total_in"