Add support for Energy sensor (Denky)

Add support for Energy sensor (Denky) for French Smart Metering meter provided by global Energy Providers
2025-07-25 11:46:31 +00:00 · 2020-06-17 15:00:48 +02:00 · 2020-06-17 15:00:48 +02:00 · 7c785ab056
commit 7c785ab056
parent 5730ced6b8
6 changed files with 15 additions and 21 deletions
--- a/RELEASENOTES.md
+++ b/RELEASENOTES.md
@ -81,6 +81,6 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
 - Add initial support for Telegram bot (#8619)
 - Add support for HP303B Temperature and Pressure sensor by Robert Jaakke (#8638)
 - Add rule trigger ``System#Init`` to allow early rule execution without wifi and mqtt initialized yet
- Created Energy sensor (Denky) for French Smart Metering meter provided by global Energy Providers, need a adaptater. See dedicated full [blog](http://hallard.me/category/tinfo/) about French teleinformation stuff
- Added Library to be used for decoding Teleinfo (French Metering Smart Meter)
+- Add support for Energy sensor (Denky) for French Smart Metering meter provided by global Energy Providers, need a adaptater. See dedicated full [blog](http://hallard.me/category/tinfo/) about French teleinformation stuff
+- Add Library to be used for decoding Teleinfo (French Metering Smart Meter)
 - Add basic support for ESP32 ethernet adding commands ``Wifi 0/1`` and ``Ethernet 0/1`` both default ON
--- a/tasmota/CHANGELOG.md
+++ b/tasmota/CHANGELOG.md
@ -3,6 +3,9 @@
 ### 8.3.1.6 20200617

 - Add command ``Module2`` to configure fallback module on fast reboot (#8464)
+- Add support for Energy sensor (Denky) for French Smart Metering meter provided by global Energy Providers, need a adaptater. See dedicated full [blog](http://hallard.me/category/tinfo/) about French teleinformation stuff
+- Add Library to be used for decoding Teleinfo (French Metering Smart Meter)
+

 ### 8.3.1.5 20200616

--- a/tasmota/my_user_config.h
+++ b/tasmota/my_user_config.h
@ -600,8 +600,6 @@
  #define USE_TASMOTA_SLAVE_FLASH_SPEED 57600      // Usually 57600 for 3.3V variants and 115200 for 5V variants
  #define USE_TASMOTA_SLAVE_SERIAL_SPEED 57600     // Depends on the sketch that is running on the Uno/Pro Mini
 //#define USE_OPENTHERM                            // Add support for OpenTherm (+15k code)
-#define USE_TELEINFO                               // Add support for Teleinfo via serial RX interface 
-  //#define USE_TELEINFO_STANDARD                    // Use standard mode (9600 bps) else it's historical mode (1200 bps)

 // -- Power monitoring sensors --------------------
 #define USE_ENERGY_MARGIN_DETECTION              // Add support for Energy Margin detection (+1k6 code)
@ -625,6 +623,8 @@
  #define LE01MR_SPEED         9600              // LE-01MR modbus baudrate (default: 9600)
  #define LE01MR_ADDR          1                 // LE-01MR modbus address (default: 0x01)
 #define USE_BL0940                               // Add support for BL0940 Energy monitor as used in Blitzwolf SHP-10 (+1k6 code)
+//#define USE_TELEINFO                             // Add support for Teleinfo via serial RX interface (+5k2 code, +168 RAM + SmartMeter LinkedList Values RAM)
+//  #define USE_TELEINFO_STANDARD                  // Use standard mode (9600 bps) else it's historical mode (1200 bps)

 // -- Low level interface devices -----------------
 #define USE_DHT                                  // Add support for DHT11, AM2301 (DHT21, DHT22, AM2302, AM2321) and SI7021 Temperature and Humidity sensor (1k6 code)
--- a/tasmota/tasmota_template.h
+++ b/tasmota/tasmota_template.h
@ -328,9 +328,9 @@ const char kSensorNames[] PROGMEM =
  D_SENSOR_AS3935 "|" D_SENSOR_PMS5003_TX "|"
  D_SENSOR_BOILER_OT_RX "|" D_SENSOR_BOILER_OT_TX "|"
  D_SENSOR_WINDMETER_SPEED "|"
-  D_SENSOR_BL0940_RX  "|"
+  D_SENSOR_BL0940_RX "|"
  D_SENSOR_TCP_TXD "|" D_SENSOR_TCP_RXD "|"
-  D_SENSOR_TELEINFO_RX "|" D_SENSOR_TELEINFO_ENABLE 
+  D_SENSOR_TELEINFO_RX "|" D_SENSOR_TELEINFO_ENABLE
  ;

 const char kSensorNamesFixed[] PROGMEM =
@ -783,7 +783,7 @@ enum SupportedModules {
  SUPLA1, WITTY, YUNSHAN, MAGICHOME, LUANIHVIO, KMC_70011, ARILUX_LC01, ARILUX_LC11, SONOFF_DUAL_R2, ARILUX_LC06,
  SONOFF_S31, ZENGGE_ZF_WF017, SONOFF_POW_R2, SONOFF_IFAN02, BLITZWOLF_BWSHP, SHELLY1, SHELLY2, PHILIPS, NEO_COOLCAM, ESP_SWITCH,
  OBI, TECKIN, APLIC_WDP303075, TUYA_DIMMER, GOSUND, ARMTRONIX_DIMMERS, SK03_TUYA, PS_16_DZ, TECKIN_US, MANZOKU_EU_4,
-  OBI2, YTF_IR_BRIDGE, DIGOO, KA10, ZX2820, MI_DESK_LAMP, SP10, WAGA, SYF05, SONOFF_L1, 
+  OBI2, YTF_IR_BRIDGE, DIGOO, KA10, ZX2820, MI_DESK_LAMP, SP10, WAGA, SYF05, SONOFF_L1,
  SONOFF_IFAN03, EXS_DIMMER, PWM_DIMMER, SONOFF_D1,
  MAXMODULE};

@ -2264,10 +2264,8 @@ const mytmplt kModules[MAXMODULE] PROGMEM = {
    GPIO_LED1_INV,    // GPIO13 WiFi Blue Led - Link and Power status
    0, 0, 0, 0
  }
-
 };

-
 #endif  // ESP8266

 #ifdef ESP32
--- a/tasmota/tasmota_template_ESP32.h
+++ b/tasmota/tasmota_template_ESP32.h
@ -225,7 +225,7 @@ const char kSensorNames[] PROGMEM =
  D_SENSOR_BL0940_RX "|"
  D_SENSOR_TCP_TXD "|" D_SENSOR_TCP_RXD "|"
  D_SENSOR_ETH_PHY_POWER "|" D_SENSOR_ETH_PHY_MDC "|" D_SENSOR_ETH_PHY_MDIO "|"
-  D_SENSOR_TELEINFO_RX "|" D_SENSOR_TELEINFO_ENABLE 
+  D_SENSOR_TELEINFO_RX "|" D_SENSOR_TELEINFO_ENABLE
  ;

 const char kSensorNamesFixed[] PROGMEM =
@ -622,20 +622,14 @@ typedef struct MYTMPLT {

 /********************************************************************************************/
 // Supported hardware modules
-enum SupportedModules {
-  WEMOS, ESP32_CAM_AITHINKER, 
-  MAXMODULE};
+enum SupportedModules { WEMOS, ESP32_CAM_AITHINKER, MAXMODULE };

 #define USER_MODULE        255

-const char kModuleNames[] PROGMEM =
-  "ESP32-DevKit|ESP32 Cam AiThinker";
+const char kModuleNames[] PROGMEM = "ESP32-DevKit|ESP32 Cam AiThinker";

 // Default module settings
-const uint8_t kModuleNiceList[MAXMODULE] PROGMEM = {
-  WEMOS,
-  ESP32_CAM_AITHINKER
-};
+const uint8_t kModuleNiceList[MAXMODULE] PROGMEM = { WEMOS, ESP32_CAM_AITHINKER };

 const mytmplt kModules PROGMEM =
 {                              // WEMOS - Espressif ESP32-DevKitC - Any ESP32 device like WeMos and NodeMCU hardware (ESP32)
@ -690,7 +684,6 @@ const mytmplt kModules PROGMEM =

 \*********************************************************************************************/

-
 #endif  // ESP32

 #endif  // _TASMOTA_TEMPLATE_ESP32_H_
--- a/tools/decode-status.py
+++ b/tools/decode-status.py
@ -206,7 +206,7 @@ a_features = [[
    "USE_IAQ","USE_DISPLAY_SEVENSEG","USE_AS3935","USE_PING",
    "USE_WINDMETER","USE_OPENTHERM","USE_THERMOSTAT","USE_VEML6075",
    "USE_VEML7700","USE_MCP9808","USE_BL0940","USE_TELEGRAM",
-    "USE_HP303B","USE_TCP_BRIDGE","","",
+    "USE_HP303B","USE_TCP_BRIDGE","USE_TELEINFO","",
    "","","","",
    "","","","",
    "","","USE_ETHERNET","USE_WEBCAM"