Add LoRa demo using LilyGo T3S3 on 868MHz (#17790)

tasmota/tasmota_xdrv_driver/xdrv_80_esp32_lora.ino

@@ -0,0 +1,163 @@
+/*
+  xdrv_80_esp32_lora.ino - LoRa support for Tasmota
+
+  SPDX-FileCopyrightText: 2024 Theo Arends
+
+  SPDX-License-Identifier: GPL-3.0-only
+*/
+
+#ifdef ESP32
+#ifdef USE_SPI
+#ifdef USE_SPI_LORA
+#ifdef USE_LORA_SX1262
+/*********************************************************************************************\
+ * Demo of LoRa using LilyGo T3S3 using SX1262 on 868MHz
+ * 
+ * Tasmota currently does not support user config of GPIO33 and GPIO34 on ESP32S3
+\*********************************************************************************************/
+
+#define XDRV_80              80
+
+#include <RadioLib.h>
+SX1262 LoRa = nullptr;
+
+struct {
+  // flag to indicate that a packet was received
+  volatile bool receivedFlag;
+  // flag to indicate that a packet was send
+  volatile bool sendFlag;
+  // disable interrupt when it's not needed
+  volatile bool enableInterrupt;
+
+  bool present;
+} Lora;
+
+/*********************************************************************************************/
+
+// this function is called when a complete packet is received by the module
+// IMPORTANT: this function MUST be 'void' type and MUST NOT have any arguments!
+void LoraSetFlag(void) {
+  // check if the interrupt is enabled
+  if (!Lora.enableInterrupt) { return; }
+  // we got a packet, set the flag
+  Lora.receivedFlag = true;
+}
+
+/*********************************************************************************************/
+
+void LoraInput(void) {
+  // check if the flag is set
+  if (!Lora.receivedFlag) { return; }
+
+  // disable the interrupt service routine while
+  // processing the data
+  Lora.enableInterrupt = false;
+
+  // reset flag
+  Lora.receivedFlag = false;
+
+  // you can read received data as an Arduino String
+  String str;
+  int state = LoRa.readData(str);
+
+  // you can also read received data as byte array
+  /*
+  byte byteArr[8];
+  int state = Lora.readData(byteArr, 8);
+  */
+
+  if (state == RADIOLIB_ERR_NONE) { 
+    if (!Lora.sendFlag) {
+      float rssi = LoRa.getRSSI();
+      float snr = LoRa.getSNR();
+      AddLog(LOG_LEVEL_DEBUG, PSTR("LOR: Data '%s', RSSI %1_f dBm, SNR %1_f dB"), str.c_str(), &rssi, &snr);
+    }
+  }
+  else if (state == RADIOLIB_ERR_CRC_MISMATCH) {
+    // packet was received, but is malformed
+    AddLog(LOG_LEVEL_DEBUG, PSTR("LOR: CRC error"));
+  }
+  else {
+    // some other error occurred
+    AddLog(LOG_LEVEL_DEBUG, PSTR("LOR: Receive error %d"), state);
+  }
+
+  // put module back to listen mode
+  LoRa.startReceive();
+
+  Lora.sendFlag = false;
+  // we're ready to receive more packets,
+  // enable interrupt service routine
+  Lora.enableInterrupt = true;
+}
+
+void LoraInit(void) {
+  if ((SPI_MOSI_MISO == TasmotaGlobal.spi_enabled) &&
+      (PinUsed(GPIO_LORA_CS)) && (PinUsed(GPIO_LORA_RST))) {
+    SPI.begin(Pin(GPIO_SPI_CLK), Pin(GPIO_SPI_MISO), Pin(GPIO_SPI_MOSI), -1);
+
+//    LoRa = new Module(Pin(GPIO_LORA_CS), Pin(GPIO_LORA_DI1), Pin(GPIO_LORA_RST), Pin(GPIO_LORA_BUSY));
+    LoRa = new Module(Pin(GPIO_LORA_CS), 33, Pin(GPIO_LORA_RST), 34);
+    if (RADIOLIB_ERR_NONE == LoRa.begin(868.0)) {
+      Lora.enableInterrupt = true;
+      LoRa.setDio1Action(LoraSetFlag);
+      if (RADIOLIB_ERR_NONE == LoRa.startReceive()) {
+        AddLog(LOG_LEVEL_DEBUG, PSTR("LOR: Initialized"));
+        Lora.present = true;
+      }
+    }
+  }
+}
+
+/*********************************************************************************************\
+ * Commands
+\*********************************************************************************************/
+
+#define D_CMND_LORASEND   "Send"
+
+const char kLoraCommands[] PROGMEM = "LoRa|"  // Prefix
+  D_CMND_LORASEND;
+
+void (* const LoraCommand[])(void) PROGMEM = {
+  &CmndLoraSend };
+
+void CmndLoraSend(void) {
+  if (XdrvMailbox.data_len > 0) {
+    Lora.sendFlag = true;
+    LoRa.startTransmit(XdrvMailbox.data);
+  }
+  ResponseCmndDone();
+}
+
+/*********************************************************************************************\
+ * Interface
+\*********************************************************************************************/
+
+bool Xdrv80(uint32_t function) {
+  bool result = false;
+
+  if (FUNC_INIT == function) {
+    LoraInit();
+  }
+  else if (Lora.present) {
+    switch (function) {
+      case FUNC_LOOP:
+      case FUNC_SLEEP_LOOP:
+        LoraInput();
+        break;
+      case FUNC_COMMAND:
+        result = DecodeCommand(kLoraCommands, LoraCommand);
+        break;
+      case FUNC_ACTIVE:
+        result = true;
+        break;
+    }
+  }
+  return result;
+}
+
+#endif  // USE_LORA_SX1262
+#endif  // USE_SPI_LORA
+#endif  // USE_SPI
+#endif  // ESP32
+