jeans/Tasmota
jeans/Tasmota
1
0
Fork 0
mirror of https://github.com/arendst/Tasmota.git synced 2025-07-23 10:46:31 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'development' of https://github.com/pcdiem/Tasmota into pwm-dimmer1

Browse Source
This commit is contained in:
Paul C Diem 2020-02-27 13:47:36 -06:00
commit 94b0ea5727
22 changed files with 2238 additions and 51 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

34
BUILDS.md
View File

@ -32,16 +32,18 @@
| ROTARY_V1 | - | - | - | - | - | - | - |
| USE_SONOFF_RF | - | - | x | x | x | - | - |
| USE_RF_FLASH | - | - | x | x | x | - | - |
| USE_SONOFF_SC | - | - | x | - | x | - | - |
| USE_SONOFF_SC | - | - | x | x | x | - | - |
| USE_TUYA_MCU | - | x | x | x | x | - | x |
| USE_ARMTRONIX_DIMMERS | - | - | x | x | - | - | - |
| USE_PS_16_DZ | - | - | x | x | x | - | - |
| USE_SONOFF_IFAN | - | - | x | x | x | - | - |
| USE_BUZZER | - | - | x | x | x | - | - |
| USE_ARILUX_RF | - | - | x | x | x | - | - |
| USE_SHUTTER | - | - | - | - | - | - | - |
| USE_SHUTTER | - | - | x | x | - | - | - |
| USE_DEEPSLEEP | - | - | x | - | x | - | - |
| USE_EXS_DIMMER | - | - | x | x | - | - | - |
| USE_DEVICE_GROUPS | - | - | x | - | - | - | - |
| USE_PWM_DIMMER | - | - | x | x | - | - | - |
| | | | | | | | |
| Feature or Sensor | minimal | lite | tasmota | knx | sensors | ir | display | Remarks
| USE_LIGHT | - | x | x | x | x | x | x |
@ -73,28 +75,28 @@
| | | | | | | | |
| Feature or Sensor | minimal | lite | tasmota | knx | sensors | ir | display | Remarks
| USE_I2C | - | - | x | x | x | - | x |
| USE_SHT | - | - | x | x | x | - | x |
| USE_HTU | - | - | x | x | x | - | x |
| USE_BMP | - | - | x | x | x | - | x |
| USE_SHT | - | - | - | - | x | - | - |
| USE_HTU | - | - | - | - | x | - | - |
| USE_BMP | - | - | - | - | x | - | - |
| USE_BME680 | - | - | - | - | x | - | - |
| USE_BH1750 | - | - | x | x | x | - | x |
| USE_BH1750 | - | - | - | - | x | - | - |
| USE_VEML6070 | - | - | - | - | x | - | - |
| USE_ADS1115 | - | - | - | - | x | - | - |
| USE_ADS1115_I2CDEV | - | - | - | - | - | - | - |
| USE_INA219 | - | - | - | - | x | - | - |
| USE_INA226 | - | - | - | - | - | - | - |
| USE_SHT3X | - | - | x | x | x | - | x |
| USE_SHT3X | - | - | - | - | x | - | - |
| USE_TSL2561 | - | - | - | - | x | - | - |
| USE_TSL2591 | - | - | - | - | - | - | - |
| USE_MGS | - | - | - | - | x | - | - |
| USE_SGP30 | - | - | x | x | x | - | x |
| USE_SGP30 | - | - | - | - | x | - | - |
| USE_SI1145 | - | - | - | - | - | - | - |
| USE_LM75AD | - | - | x | x | x | - | x |
| USE_LM75AD | - | - | - | - | x | - | - |
| USE_APDS9960 | - | - | - | - | - | - | - |
| USE_MCP230xx | - | - | - | - | - | - | - |
| USE_PCA9685 | - | - | - | - | - | - | - |
| USE_MPR121 | - | - | - | - | - | - | - |
| USE_CCS811 | - | - | - | - | - | - | - |
| USE_CCS811 | - | - | - | - | x | - | - |
| USE_MPU6050 | - | - | - | - | - | - | - |
| USE_DS3231 | - | - | - | - | - | - | - |
| USE_MGC3130 | - | - | - | - | - | - | - |
@ -115,10 +117,10 @@
| | | | | | | | |
| Feature or Sensor | minimal | lite | tasmota | knx | sensors | ir | display | Remarks
| USE_SPI | - | - | - | - | - | - | x |
| USE_MHZ19 | - | - | x | x | x | - | x |
| USE_SENSEAIR | - | - | x | x | x | - | x |
| USE_PMS5003 | - | - | x | x | x | - | x |
| USE_NOVA_SDS | - | - | x | x | x | - | x |
| USE_MHZ19 | - | - | - | - | x | - | - |
| USE_SENSEAIR | - | - | - | - | x | - | - |
| USE_PMS5003 | - | - | - | - | x | - | - |
| USE_NOVA_SDS | - | - | - | - | x | - | - |
| USE_HPMA | - | - | - | - | x | - | - |
| USE_SERIAL_BRIDGE | - | - | x | x | x | - | x |
| USE_MP3_PLAYER | - | - | - | - | x | - | - |
@ -137,9 +139,9 @@
| USE_IR_RECEIVE | - | - | x | x | x | x | x |
| USE_IR_REMOTE_FULL | - | - | - | - | - | x | - | Enable ALL protocols
| | | | | | | | |
| USE_SR04 | - | - | x | x | x | - | x |
| USE_SR04 | - | - | - | - | x | - | - |
| USE_TM1638 | - | - | - | - | x | - | - |
| USE_HX711 | - | - | x | x | x | - | x |
| USE_HX711 | - | - | - | - | x | - | - |
| USE_TX20_WIND_SENSOR | - | - | - | - | x | - | - |
| USE_RC_SWITCH | - | - | - | - | x | - | - |
| USE_RF_SENSOR | - | - | - | - | x | - | - | AlectoV2 only

4
RELEASENOTES.md
View File

@ -52,8 +52,9 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
## Changelog
### Version 8.1.0.9
### Version 8.1.0.10
- Change default my_user_config.h driver and sensor support removing most sensors and adding most drivers
- Change Lights: simplified gamma correction and 10 bits internal computation
- Change commands ``Prefix``, ``Ssid``, ``StateText``, ``NTPServer``, and ``FriendlyName`` displaying all items
- Change IRremoteESP8266 library updated to v2.7.3
@ -108,3 +109,4 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
- Add Zigbee enhanced commands decoding, added ``ZbPing``
- Add commands ``SetOption85 0/1`` and ``DevGroupShare`` supporting UDP Group command using ``GroupTopic`` without MQTT by Paul Diem (#7790)
- Add support for Martin Jerry/acenx/Tessan/NTONPOWER SD0x PWM dimmer switches by Paul Diem (#7791)
- Add support for Jarolift rollers by Keeloq algorithm

12
lib/KeeloqLib/README.md Normal file
View File

@ -0,0 +1,12 @@
## Keeloq encryption algorithm
This implementations might be useful if you are playing around with [Microchip Keeloq](http://www.microchip.com/pagehandler/en-us/technology/embeddedsecurity/technology/keeloqencoderdl.html) chips.
I verified that this algorithm gives the same results as that produced by the Microchip SDK for several test cases.
The Keeloq algorithm is not patented.
However, since Microchip does hold a patent on its application to secure keyless entry,
it probably would not be wise to make a commercial secure keyless entry product using this algorithm in a non-Microchip processor.
Personal experimentation should be okay.
__If you decide to make something commercial, buy Microchip's processors.__

20
lib/KeeloqLib/keywords.txt Normal file
View File

@ -0,0 +1,20 @@
#######################################
# Syntax Coloring Map For CamelliaLib.
#######################################
#######################################
# Datatypes (KEYWORD1)
#######################################
Keeloq KEYWORD1
#######################################
# Methods and Functions (KEYWORD2)
#######################################
encrypt KEYWORD2
decrypt KEYWORD2
#######################################
# Constants (LITERAL1)
#######################################

9
lib/KeeloqLib/library.properties Normal file
View File

@ -0,0 +1,9 @@
name=KeeloqLib
version=1.1
author=Mirko Falchetto <mirko.monmarche@gmail.com>
maintainer=Mirko Falchetto <mirko.monmarche@gmail.com>
sentence=C++ Class Implementing Keeloq cipher by Microchip.com.
paragraph=Developed/Tested on Arduino/ESP8266 with Arduino IDE Environment.
category=Uncategorized
url=http://none.net
architectures=*

58
lib/KeeloqLib/src/KeeloqLib.cpp Normal file
View File

@ -0,0 +1,58 @@
/*
Keeloq.cpp - Keeloq encryption/decryption
Written by Frank Kienast in November, 2010
*/
#include "KeeloqLib.h"
#define KeeLoq_NLF (0x3A5C742EUL)
Keeloq::Keeloq(const unsigned long keyHigh, const unsigned long keyLow) :
_keyHigh( keyHigh ),
_keyLow( keyLow )
{
}
unsigned long Keeloq::encrypt( const unsigned long data )
{
unsigned long x = data;
unsigned long r;
int keyBitNo, index;
unsigned long keyBitVal,bitVal;
for ( r = 0; r < 528; r++ )
{
keyBitNo = r & 63;
if(keyBitNo < 32)
keyBitVal = bitRead(_keyLow,keyBitNo);
else
keyBitVal = bitRead(_keyHigh, keyBitNo - 32);
index = 1 * bitRead(x,1) + 2 * bitRead(x,9) + 4 * bitRead(x,20) + 8 * bitRead(x,26) + 16 * bitRead(x,31);
bitVal = bitRead(x,0) ^ bitRead(x, 16) ^ bitRead(KeeLoq_NLF,index) ^ keyBitVal;
x = (x>>1) ^ bitVal<<31;
}
return x;
}
unsigned long Keeloq::decrypt( const unsigned long data )
{
unsigned long x = data;
unsigned long r;
int keyBitNo, index;
unsigned long keyBitVal,bitVal;
for (r = 0; r < 528; r++)
{
keyBitNo = (15-r) & 63;
if(keyBitNo < 32)
keyBitVal = bitRead(_keyLow,keyBitNo);
else
keyBitVal = bitRead(_keyHigh, keyBitNo - 32);
index = 1 * bitRead(x,0) + 2 * bitRead(x,8) + 4 * bitRead(x,19) + 8 * bitRead(x,25) + 16 * bitRead(x,30);
bitVal = bitRead(x,31) ^ bitRead(x, 15) ^ bitRead(KeeLoq_NLF,index) ^ keyBitVal;
x = (x<<1) ^ bitVal;
}
return x;
}

28
lib/KeeloqLib/src/KeeloqLib.h Normal file
View File

@ -0,0 +1,28 @@
/*
Keeloq.h - Crypto library
Written by Frank Kienast in November, 2010
*/
#ifndef Keeloq_lib_h
#define Keeloq_lib_h
#if defined(ARDUINO) && ARDUINO >= 100
#include <Arduino.h>
#else
#include <WProgram.h>
#endif
class Keeloq
{
public:
Keeloq(
const unsigned long keyHigh,
const unsigned long keyLow );
unsigned long encrypt( const unsigned long data );
unsigned long decrypt( const unsigned long data );
private:
unsigned long _keyHigh;
unsigned long _keyLow;
};
#endif /*Keeloq_lib_h*/

27
lib/KeeloqLib/tests/KeeloqLibTest/KeeloqLibTest.ino Normal file
View File

@ -0,0 +1,27 @@
#include <KeeloqLib.h>
void setup( void )
{
Serial.begin(9600);
Keeloq k(0x01020304,0x05060708);
const unsigned long p = 6623281UL;
const unsigned long enc = k.encrypt(p);
const unsigned long dec = k.decrypt(enc);
Serial.print("Plaintext : ");
Serial.println(p,DEC);
Serial.print("After encrypt: ");
Serial.println(enc,HEX);
Serial.print("After decrypt: ");
Serial.println(dec,DEC);
}
void loop( void )
{
delay(3000);
}

1
lib/cc1101/README.md Normal file
View File

@ -0,0 +1 @@
Port of panStamp's CC1101 Library to ESP8266.

548
lib/cc1101/cc1101.cpp Normal file
View File

@ -0,0 +1,548 @@
#include <SPI.h>
/**
* Copyright (c) 2011 panStamp <contact@panstamp.com>
*
* This file is part of the panStamp project.
*
* panStamp is free software; you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* any later version.
*
* panStamp is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with panStamp; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
* USA
*
* Author: Daniel Berenguer
* Creation date: 03/03/2011
*/
extern "C" {
#include "cc1101.h"
}
#define PORT_GDO0 5
#define byte uint8_t
/**
* Macros
*/
// Select (SPI) CC1101
#define cc1101_Select() spi.begin()
// Deselect (SPI) CC1101
#define cc1101_Deselect() spi.end()
// Wait until SPI MISO line goes low
#define wait_Miso() delay(10)
//while(digitalRead(PORT_SPI_MISO))
// Get GDO0 pin state
#define getGDO0state() digitalRead(PORT_GDO0)
// Wait until GDO0 line goes high
#define wait_GDO0_high() while(!getGDO0state()) {delay(1);}
// Wait until GDO0 line goes low
#define wait_GDO0_low() while(getGDO0state()) {delay(1);}
/**
* PATABLE
*/
const byte paTable[8] = {0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
/**
* CC1101
*
* Class constructor
*/
CC1101::CC1101(void)
{
carrierFreq = CFREQ_868;
channel = CC1101_DEFVAL_CHANNR;
syncWord[0] = CC1101_DEFVAL_SYNC1;
syncWord[1] = CC1101_DEFVAL_SYNC0;
devAddress = CC1101_DEFVAL_ADDR;
paTableByte = PA_LowPower; // Priority = Low power
}
/**
* wakeUp
*
* Wake up CC1101 from Power Down state
*/
void CC1101::wakeUp(void)
{
cc1101_Select(); // Select CC1101
wait_Miso(); // Wait until MISO goes low
cc1101_Deselect(); // Deselect CC1101
}
/**
* writeReg
*
* Write single register into the CC1101 IC via SPI
*
* 'regAddr' Register address
* 'value' Value to be writen
*/
void CC1101::writeReg(byte regAddr, byte value)
{
cc1101_Select(); // Select CC1101
wait_Miso(); // Wait until MISO goes low
spi.transfer(regAddr); // Send register address
spi.transfer(value); // Send value
cc1101_Deselect(); // Deselect CC1101
}
/**
* writeBurstReg
*
* Write multiple registers into the CC1101 IC via SPI
*
* 'regAddr' Register address
* 'buffer' Data to be writen
* 'len' Data length
*/
void CC1101::writeBurstReg(byte regAddr, byte* buffer, byte len)
{
byte addr, i;
addr = regAddr | WRITE_BURST; // Enable burst transfer
cc1101_Select(); // Select CC1101
wait_Miso(); // Wait until MISO goes low
spi.transfer(addr); // Send register address
for(i=0 ; i<len ; i++)
spi.transfer(buffer[i]); // Send value
cc1101_Deselect(); // Deselect CC1101
}
/**
* cmdStrobe
*
* Send command strobe to the CC1101 IC via SPI
*
* 'cmd' Command strobe
*/
void CC1101::cmdStrobe(byte cmd)
{
cc1101_Select(); // Select CC1101
wait_Miso(); // Wait until MISO goes low
spi.transfer(cmd); // Send strobe command
cc1101_Deselect(); // Deselect CC1101
}
/**
* readReg
*
* Read CC1101 register via SPI
*
* 'regAddr' Register address
* 'regType' Type of register: CC1101_CONFIG_REGISTER or CC1101_STATUS_REGISTER
*
* Return:
* Data byte returned by the CC1101 IC
*/
byte CC1101::readReg(byte regAddr, byte regType)
{
byte addr, val;
addr = regAddr | regType;
cc1101_Select(); // Select CC1101
wait_Miso(); // Wait until MISO goes low
spi.transfer(addr); // Send register address
val = spi.transfer(0x00); // Read result
cc1101_Deselect(); // Deselect CC1101
return val;
}
/**
* readBurstReg
*
* Read burst data from CC1101 via SPI
*
* 'buffer' Buffer where to copy the result to
* 'regAddr' Register address
* 'len' Data length
*/
void CC1101::readBurstReg(byte * buffer, byte regAddr, byte len)
{
byte addr, i;
addr = regAddr | READ_BURST;
cc1101_Select(); // Select CC1101
wait_Miso(); // Wait until MISO goes low
spi.transfer(addr); // Send register address
for(i=0 ; i<len ; i++)
buffer[i] = spi.transfer(0x00); // Read result byte by byte
cc1101_Deselect(); // Deselect CC1101
}
/**
* reset
*
* Reset CC1101
*/
void CC1101::reset(void)
{
cc1101_Deselect(); // Deselect CC1101
delayMicroseconds(5);
cc1101_Select(); // Select CC1101
delayMicroseconds(10);
cc1101_Deselect(); // Deselect CC1101
delayMicroseconds(41);
cc1101_Select(); // Select CC1101
wait_Miso(); // Wait until MISO goes low
spi.transfer(CC1101_SRES); // Send reset command strobe
wait_Miso(); // Wait until MISO goes low
cc1101_Deselect(); // Deselect CC1101
setCCregs(); // Reconfigure CC1101
}
/**
* setCCregs
*
* Configure CC1101 registers
*/
void CC1101::setCCregs(void)
{
writeReg(CC1101_IOCFG2, CC1101_DEFVAL_IOCFG2);
writeReg(CC1101_IOCFG1, CC1101_DEFVAL_IOCFG1);
writeReg(CC1101_IOCFG0, CC1101_DEFVAL_IOCFG0);
writeReg(CC1101_FIFOTHR, CC1101_DEFVAL_FIFOTHR);
writeReg(CC1101_PKTLEN, CC1101_DEFVAL_PKTLEN);
writeReg(CC1101_PKTCTRL1, CC1101_DEFVAL_PKTCTRL1);
writeReg(CC1101_PKTCTRL0, CC1101_DEFVAL_PKTCTRL0);
// Set default synchronization word
setSyncWord(syncWord);
// Set default device address
setDevAddress(devAddress);
// Set default frequency channel
setChannel(channel);
writeReg(CC1101_FSCTRL1, CC1101_DEFVAL_FSCTRL1);
writeReg(CC1101_FSCTRL0, CC1101_DEFVAL_FSCTRL0);
// Set default carrier frequency = 868 MHz
setCarrierFreq(carrierFreq);
writeReg(CC1101_MDMCFG4, CC1101_DEFVAL_MDMCFG4);
writeReg(CC1101_MDMCFG3, CC1101_DEFVAL_MDMCFG3);
writeReg(CC1101_MDMCFG2, CC1101_DEFVAL_MDMCFG2);
writeReg(CC1101_MDMCFG1, CC1101_DEFVAL_MDMCFG1);
writeReg(CC1101_MDMCFG0, CC1101_DEFVAL_MDMCFG0);
writeReg(CC1101_DEVIATN, CC1101_DEFVAL_DEVIATN);
writeReg(CC1101_MCSM2, CC1101_DEFVAL_MCSM2);
writeReg(CC1101_MCSM1, CC1101_DEFVAL_MCSM1);
writeReg(CC1101_MCSM0, CC1101_DEFVAL_MCSM0);
writeReg(CC1101_FOCCFG, CC1101_DEFVAL_FOCCFG);
writeReg(CC1101_BSCFG, CC1101_DEFVAL_BSCFG);
writeReg(CC1101_AGCCTRL2, CC1101_DEFVAL_AGCCTRL2);
writeReg(CC1101_AGCCTRL1, CC1101_DEFVAL_AGCCTRL1);
writeReg(CC1101_AGCCTRL0, CC1101_DEFVAL_AGCCTRL0);
writeReg(CC1101_WOREVT1, CC1101_DEFVAL_WOREVT1);
writeReg(CC1101_WOREVT0, CC1101_DEFVAL_WOREVT0);
writeReg(CC1101_WORCTRL, CC1101_DEFVAL_WORCTRL);
writeReg(CC1101_FREND1, CC1101_DEFVAL_FREND1);
writeReg(CC1101_FREND0, CC1101_DEFVAL_FREND0);
writeReg(CC1101_FSCAL3, CC1101_DEFVAL_FSCAL3);
writeReg(CC1101_FSCAL2, CC1101_DEFVAL_FSCAL2);
writeReg(CC1101_FSCAL1, CC1101_DEFVAL_FSCAL1);
writeReg(CC1101_FSCAL0, CC1101_DEFVAL_FSCAL0);
writeReg(CC1101_RCCTRL1, CC1101_DEFVAL_RCCTRL1);
writeReg(CC1101_RCCTRL0, CC1101_DEFVAL_RCCTRL0);
writeReg(CC1101_FSTEST, CC1101_DEFVAL_FSTEST);
writeReg(CC1101_PTEST, CC1101_DEFVAL_PTEST);
writeReg(CC1101_AGCTEST, CC1101_DEFVAL_AGCTEST);
writeReg(CC1101_TEST2, CC1101_DEFVAL_TEST2);
writeReg(CC1101_TEST1, CC1101_DEFVAL_TEST1);
writeReg(CC1101_TEST0, CC1101_DEFVAL_TEST0);
// Send empty packet
CCPACKET packet;
packet.length = 0;
sendData(packet);
}
/**
* init
*
* Initialize CC1101 radio
*
* @param freq Carrier frequency
*/
void CC1101::init(uint8_t freq)
{
carrierFreq = freq;
spi.begin(); // Initialize SPI interface
pinMode(PORT_GDO0, INPUT); // Config GDO0 as input
reset(); // Reset CC1101
// Configure PATABLE
//writeBurstReg(CC1101_PATABLE, (byte*)paTable, 8);
writeReg(CC1101_PATABLE, paTableByte);
}
/**
* setSyncWord
*
* Set synchronization word
*
* 'syncH' Synchronization word - High byte
* 'syncL' Synchronization word - Low byte
*/
void CC1101::setSyncWord(uint8_t syncH, uint8_t syncL)
{
writeReg(CC1101_SYNC1, syncH);
writeReg(CC1101_SYNC0, syncL);
syncWord[0] = syncH;
syncWord[1] = syncL;
}
/**
* setSyncWord (overriding method)
*
* Set synchronization word
*
* 'syncH' Synchronization word - pointer to 2-byte array
*/
void CC1101::setSyncWord(byte *sync)
{
CC1101::setSyncWord(sync[0], sync[1]);
}
/**
* setDevAddress
*
* Set device address
*
* @param addr Device address
*/
void CC1101::setDevAddress(byte addr)
{
writeReg(CC1101_ADDR, addr);
devAddress = addr;
}
/**
* setChannel
*
* Set frequency channel
*
* 'chnl' Frequency channel
*/
void CC1101::setChannel(byte chnl)
{
writeReg(CC1101_CHANNR, chnl);
channel = chnl;
}
/**
* setCarrierFreq
*
* Set carrier frequency
*
* 'freq' New carrier frequency
*/
void CC1101::setCarrierFreq(byte freq)
{
switch(freq)
{
case CFREQ_915:
writeReg(CC1101_FREQ2, CC1101_DEFVAL_FREQ2_915);
writeReg(CC1101_FREQ1, CC1101_DEFVAL_FREQ1_915);
writeReg(CC1101_FREQ0, CC1101_DEFVAL_FREQ0_915);
break;
case CFREQ_433:
writeReg(CC1101_FREQ2, CC1101_DEFVAL_FREQ2_433);
writeReg(CC1101_FREQ1, CC1101_DEFVAL_FREQ1_433);
writeReg(CC1101_FREQ0, CC1101_DEFVAL_FREQ0_433);
break;
case CFREQ_918:
writeReg(CC1101_FREQ2, CC1101_DEFVAL_FREQ2_918);
writeReg(CC1101_FREQ1, CC1101_DEFVAL_FREQ1_918);
writeReg(CC1101_FREQ0, CC1101_DEFVAL_FREQ0_918);
break;
default:
writeReg(CC1101_FREQ2, CC1101_DEFVAL_FREQ2_868);
writeReg(CC1101_FREQ1, CC1101_DEFVAL_FREQ1_868);
writeReg(CC1101_FREQ0, CC1101_DEFVAL_FREQ0_868);
break;
}
carrierFreq = freq;
}
/**
* setPowerDownState
*
* Put CC1101 into power-down state
*/
void CC1101::setPowerDownState()
{
// Comming from RX state, we need to enter the IDLE state first
cmdStrobe(CC1101_SIDLE);
// Enter Power-down state
cmdStrobe(CC1101_SPWD);
}
/**
* sendData
*
* Send data packet via RF
*
* 'packet' Packet to be transmitted. First byte is the destination address
*
* Return:
* True if the transmission succeeds
* False otherwise
*/
bool CC1101::sendData(CCPACKET packet)
{
byte marcState;
bool res = false;
// Declare to be in Tx state. This will avoid receiving packets whilst
// transmitting
rfState = RFSTATE_TX;
// Enter RX state
setRxState();
// Check that the RX state has been entered
while (((marcState = readStatusReg(CC1101_MARCSTATE)) & 0x1F) != 0x0D)
{
if (marcState == 0x11) // RX_OVERFLOW
flushRxFifo(); // flush receive queue
}
delayMicroseconds(500);
if (packet.length > 0)
{
// Set data length at the first position of the TX FIFO
writeReg(CC1101_TXFIFO, packet.length);
// Write data into the TX FIFO
writeBurstReg(CC1101_TXFIFO, packet.data, packet.length);
// CCA enabled: will enter TX state only if the channel is clear
setTxState();
}
// Check that TX state is being entered (state = RXTX_SETTLING)
marcState = readStatusReg(CC1101_MARCSTATE) & 0x1F;
if((marcState != 0x13) && (marcState != 0x14) && (marcState != 0x15))
{
setIdleState(); // Enter IDLE state
flushTxFifo(); // Flush Tx FIFO
setRxState(); // Back to RX state
// Declare to be in Rx state
rfState = RFSTATE_RX;
return false;
}
// Wait for the sync word to be transmitted
wait_GDO0_high();
// Wait until the end of the packet transmission
wait_GDO0_low();
// Check that the TX FIFO is empty
if((readStatusReg(CC1101_TXBYTES) & 0x7F) == 0)
res = true;
setIdleState(); // Enter IDLE state
flushTxFifo(); // Flush Tx FIFO
// Enter back into RX state
setRxState();
// Declare to be in Rx state
rfState = RFSTATE_RX;
return res;
}
/**
* receiveData
*
* Read data packet from RX FIFO
*
* 'packet' Container for the packet received
*
* Return:
* Amount of bytes received
*/
byte CC1101::receiveData(CCPACKET * packet)
{
byte val;
byte rxBytes = readStatusReg(CC1101_RXBYTES);
// Any byte waiting to be read and no overflow?
if (rxBytes & 0x7F)
{
// Read data length
packet->length = readConfigReg(CC1101_RXFIFO);
// If packet is too long
if (packet->length > CCPACKET_DATA_LEN)
packet->length = 0; // Discard packet
else
{
// Read data packet
readBurstReg(packet->data, CC1101_RXFIFO, packet->length);
// Read RSSI
packet->rssi = readConfigReg(CC1101_RXFIFO);
// Read LQI and CRC_OK
val = readConfigReg(CC1101_RXFIFO);
packet->lqi = val & 0x7F;
packet->crc_ok = bitRead(val, 7);
}
}
else
packet->length = 0;
setIdleState(); // Enter IDLE state
flushRxFifo(); // Flush Rx FIFO
//cmdStrobe(CC1101_SCAL);
// Back to RX state
setRxState();
return packet->length;
}
/**
* setRxState
*
* Enter Rx state
*/
void CC1101::setRxState(void)
{
cmdStrobe(CC1101_SRX);
rfState = RFSTATE_RX;
}
/**
* setTxState
*
* Enter Tx state
*/
void CC1101::setTxState(void)
{
cmdStrobe(CC1101_STX);
rfState = RFSTATE_TX;
}

548
lib/cc1101/cc1101.h Normal file
View File

@ -0,0 +1,548 @@
#include <SPI.h>
/**
* Copyright (c) 2011 panStamp <contact@panstamp.com>
*
* This file is part of the panStamp project.
*
* panStamp is free software; you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* any later version.
*
* panStamp is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with panStamp; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
* USA
*
* Author: Daniel Berenguer
* Creation date: 03/03/2011
*/
#ifndef _CC1101_H
#define _CC1101_H
//#include "simplespi.h"
extern "C" {
#include <stdint.h>
#include "ccpacket.h"
}
/**
* Carrier frequencies
*/
enum CFREQ
{
CFREQ_868 = 0,
CFREQ_915,
CFREQ_433,
CFREQ_918,
CFREQ_LAST
};
/**
* RF STATES
*/
enum RFSTATE
{
RFSTATE_IDLE = 0,
RFSTATE_RX,
RFSTATE_TX
};
/**
* Frequency channels
*/
#define NUMBER_OF_FCHANNELS 10
/**
* Type of transfers
*/
#define WRITE_BURST 0x40
#define READ_SINGLE 0x80
#define READ_BURST 0xC0
/**
* Type of register
*/
#define CC1101_CONFIG_REGISTER READ_SINGLE
#define CC1101_STATUS_REGISTER READ_BURST
/**
* PATABLE & FIFO's
*/
#define CC1101_PATABLE 0x3E // PATABLE address
#define CC1101_TXFIFO 0x3F // TX FIFO address
#define CC1101_RXFIFO 0x3F // RX FIFO address
/**
* Command strobes
*/
#define CC1101_SRES 0x30 // Reset CC1101 chip
#define CC1101_SFSTXON 0x31 // Enable and calibrate frequency synthesizer (if MCSM0.FS_AUTOCAL=1). If in RX (with CCA):
// Go to a wait state where only the synthesizer is running (for quick RX / TX turnaround).
#define CC1101_SXOFF 0x32 // Turn off crystal oscillator
#define CC1101_SCAL 0x33 // Calibrate frequency synthesizer and turn it off. SCAL can be strobed from IDLE mode without
// setting manual calibration mode (MCSM0.FS_AUTOCAL=0)
#define CC1101_SRX 0x34 // Enable RX. Perform calibration first if coming from IDLE and MCSM0.FS_AUTOCAL=1
#define CC1101_STX 0x35 // In IDLE state: Enable TX. Perform calibration first if MCSM0.FS_AUTOCAL=1.
// If in RX state and CCA is enabled: Only go to TX if channel is clear
#define CC1101_SIDLE 0x36 // Exit RX / TX, turn off frequency synthesizer and exit Wake-On-Radio mode if applicable
#define CC1101_SWOR 0x38 // Start automatic RX polling sequence (Wake-on-Radio) as described in Section 19.5 if
// WORCTRL.RC_PD=0
#define CC1101_SPWD 0x39 // Enter power down mode when CSn goes high
#define CC1101_SFRX 0x3A // Flush the RX FIFO buffer. Only issue SFRX in IDLE or RXFIFO_OVERFLOW states
#define CC1101_SFTX 0x3B // Flush the TX FIFO buffer. Only issue SFTX in IDLE or TXFIFO_UNDERFLOW states
#define CC1101_SWORRST 0x3C // Reset real time clock to Event1 value
#define CC1101_SNOP 0x3D // No operation. May be used to get access to the chip status byte
/**
* CC1101 configuration registers
*/
#define CC1101_IOCFG2 0x00 // GDO2 Output Pin Configuration
#define CC1101_IOCFG1 0x01 // GDO1 Output Pin Configuration
#define CC1101_IOCFG0 0x02 // GDO0 Output Pin Configuration
#define CC1101_FIFOTHR 0x03 // RX FIFO and TX FIFO Thresholds
#define CC1101_SYNC1 0x04 // Sync Word, High Byte
#define CC1101_SYNC0 0x05 // Sync Word, Low Byte
#define CC1101_PKTLEN 0x06 // Packet Length
#define CC1101_PKTCTRL1 0x07 // Packet Automation Control
#define CC1101_PKTCTRL0 0x08 // Packet Automation Control
#define CC1101_ADDR 0x09 // Device Address
#define CC1101_CHANNR 0x0A // Channel Number
#define CC1101_FSCTRL1 0x0B // Frequency Synthesizer Control
#define CC1101_FSCTRL0 0x0C // Frequency Synthesizer Control
#define CC1101_FREQ2 0x0D // Frequency Control Word, High Byte
#define CC1101_FREQ1 0x0E // Frequency Control Word, Middle Byte
#define CC1101_FREQ0 0x0F // Frequency Control Word, Low Byte
#define CC1101_MDMCFG4 0x10 // Modem Configuration
#define CC1101_MDMCFG3 0x11 // Modem Configuration
#define CC1101_MDMCFG2 0x12 // Modem Configuration
#define CC1101_MDMCFG1 0x13 // Modem Configuration
#define CC1101_MDMCFG0 0x14 // Modem Configuration
#define CC1101_DEVIATN 0x15 // Modem Deviation Setting
#define CC1101_MCSM2 0x16 // Main Radio Control State Machine Configuration
#define CC1101_MCSM1 0x17 // Main Radio Control State Machine Configuration
#define CC1101_MCSM0 0x18 // Main Radio Control State Machine Configuration
#define CC1101_FOCCFG 0x19 // Frequency Offset Compensation Configuration
#define CC1101_BSCFG 0x1A // Bit Synchronization Configuration
#define CC1101_AGCCTRL2 0x1B // AGC Control
#define CC1101_AGCCTRL1 0x1C // AGC Control
#define CC1101_AGCCTRL0 0x1D // AGC Control
#define CC1101_WOREVT1 0x1E // High Byte Event0 Timeout
#define CC1101_WOREVT0 0x1F // Low Byte Event0 Timeout
#define CC1101_WORCTRL 0x20 // Wake On Radio Control
#define CC1101_FREND1 0x21 // Front End RX Configuration
#define CC1101_FREND0 0x22 // Front End TX Configuration
#define CC1101_FSCAL3 0x23 // Frequency Synthesizer Calibration
#define CC1101_FSCAL2 0x24 // Frequency Synthesizer Calibration
#define CC1101_FSCAL1 0x25 // Frequency Synthesizer Calibration
#define CC1101_FSCAL0 0x26 // Frequency Synthesizer Calibration
#define CC1101_RCCTRL1 0x27 // RC Oscillator Configuration
#define CC1101_RCCTRL0 0x28 // RC Oscillator Configuration
#define CC1101_FSTEST 0x29 // Frequency Synthesizer Calibration Control
#define CC1101_PTEST 0x2A // Production Test
#define CC1101_AGCTEST 0x2B // AGC Test
#define CC1101_TEST2 0x2C // Various Test Settings
#define CC1101_TEST1 0x2D // Various Test Settings
#define CC1101_TEST0 0x2E // Various Test Settings
/**
* Status registers
*/
#define CC1101_PARTNUM 0x30 // Chip ID
#define CC1101_VERSION 0x31 // Chip ID
#define CC1101_FREQEST 0x32 // Frequency Offset Estimate from Demodulator
#define CC1101_LQI 0x33 // Demodulator Estimate for Link Quality
#define CC1101_RSSI 0x34 // Received Signal Strength Indication
#define CC1101_MARCSTATE 0x35 // Main Radio Control State Machine State
#define CC1101_WORTIME1 0x36 // High Byte of WOR Time
#define CC1101_WORTIME0 0x37 // Low Byte of WOR Time
#define CC1101_PKTSTATUS 0x38 // Current GDOx Status and Packet Status
#define CC1101_VCO_VC_DAC 0x39 // Current Setting from PLL Calibration Module
#define CC1101_TXBYTES 0x3A // Underflow and Number of Bytes
#define CC1101_RXBYTES 0x3B // Overflow and Number of Bytes
#define CC1101_RCCTRL1_STATUS 0x3C // Last RC Oscillator Calibration Result
#define CC1101_RCCTRL0_STATUS 0x3D // Last RC Oscillator Calibration Result
/**
* CC1101 configuration registers - Default values extracted from SmartRF Studio
*
* Configuration:
*
* Deviation = 20.629883
* Base frequency = 867.999939
* Carrier frequency = 867.999939
* Channel number = 0
* Carrier frequency = 867.999939
* Modulated = true
* Modulation format = GFSK
* Manchester enable = false
* Data whitening = off
* Sync word qualifier mode = 30/32 sync word bits detected
* Preamble count = 4
* Channel spacing = 199.951172
* Carrier frequency = 867.999939
* Data rate = 38.3835 Kbps
* RX filter BW = 101.562500
* Data format = Normal mode
* Length config = Variable packet length mode. Packet length configured by the first byte after sync word
* CRC enable = true
* Packet length = 255
* Device address = 1
* Address config = Enable address check
* Append status = Append two status bytes to the payload of the packet. The status bytes contain RSSI and
* LQI values, as well as CRC OK
* CRC autoflush = false
* PA ramping = false
* TX power = 12
* GDO0 mode = Asserts when sync word has been sent / received, and de-asserts at the end of the packet.
* In RX, the pin will also de-assert when a packet is discarded due to address or maximum length filtering
* or when the radio enters RXFIFO_OVERFLOW state. In TX the pin will de-assert if the TX FIFO underflows
* Settings optimized for low current consumption
*/
#define CC1101_DEFVAL_IOCFG2 0x0D // GDO2 Output Pin Configuration
#define CC1101_DEFVAL_IOCFG1 0x2E // GDO1 Output Pin Configuration
#define CC1101_DEFVAL_IOCFG0 0x2D // GDO0 Output Pin Configuration
#define CC1101_DEFVAL_FIFOTHR 0x07 // RX FIFO and TX FIFO Thresholds
#define CC1101_DEFVAL_SYNC1 0xD3 // Synchronization word, high byte
#define CC1101_DEFVAL_SYNC0 0x91 // Synchronization word, low byte
#define CC1101_DEFVAL_PKTLEN 0x3D // Packet Length
#define CC1101_DEFVAL_PKTCTRL1 0x04 // Packet Automation Control
#define CC1101_DEFVAL_PKTCTRL0 0x32 // Packet Automation Control
#define CC1101_DEFVAL_ADDR 0xFF // Device Address
#define CC1101_DEFVAL_CHANNR 0x00 // Channel Number
#define CC1101_DEFVAL_FSCTRL1 0x06 // Frequency Synthesizer Control
#define CC1101_DEFVAL_FSCTRL0 0x00 // Frequency Synthesizer Control
// Carrier frequency = 868 MHz
#define CC1101_DEFVAL_FREQ2_868 0x21 // Frequency Control Word, High Byte
#define CC1101_DEFVAL_FREQ1_868 0x62 // Frequency Control Word, Middle Byte
#define CC1101_DEFVAL_FREQ0_868 0x76 // Frequency Control Word, Low Byte
// Carrier frequency = 902 MHz
#define CC1101_DEFVAL_FREQ2_915 0x22 // Frequency Control Word, High Byte
#define CC1101_DEFVAL_FREQ1_915 0xB1 // Frequency Control Word, Middle Byte
#define CC1101_DEFVAL_FREQ0_915 0x3B // Frequency Control Word, Low Byte
// Carrier frequency = 918 MHz
#define CC1101_DEFVAL_FREQ2_918 0x23 // Frequency Control Word, High Byte
#define CC1101_DEFVAL_FREQ1_918 0x4E // Frequency Control Word, Middle Byte
#define CC1101_DEFVAL_FREQ0_918 0xC4 // Frequency Control Word, Low Byte
// Carrier frequency = 433 MHz
#define CC1101_DEFVAL_FREQ2_433 0x10 // Frequency Control Word, High Byte
#define CC1101_DEFVAL_FREQ1_433 0xB0 // Frequency Control Word, Middle Byte
#define CC1101_DEFVAL_FREQ0_433 0xBD // Frequency Control Word, Low Byte
#define CC1101_DEFVAL_MDMCFG4 0x56 // Modem Configuration
#define CC1101_DEFVAL_MDMCFG3 0x83 // Modem Configuration
#define CC1101_DEFVAL_MDMCFG2 0x30 // Modem Configuration
#define CC1101_DEFVAL_MDMCFG1 0x22 // Modem Configuration
#define CC1101_DEFVAL_MDMCFG0 0xF8 // Modem Configuration
#define CC1101_DEFVAL_DEVIATN 0x00 // Modem Deviation Setting
#define CC1101_DEFVAL_MCSM2 0x07 // Main Radio Control State Machine Configuration
#define CC1101_DEFVAL_MCSM1 0x00 // Main Radio Control State Machine Configuration
#define CC1101_DEFVAL_MCSM0 0x18 // Main Radio Control State Machine Configuration
#define CC1101_DEFVAL_FOCCFG 0x14 // Frequency Offset Compensation Configuration
#define CC1101_DEFVAL_BSCFG 0x6C // Bit Synchronization Configuration
#define CC1101_DEFVAL_AGCCTRL2 0x07 // AGC Control
#define CC1101_DEFVAL_AGCCTRL1 0x00 // AGC Control
#define CC1101_DEFVAL_AGCCTRL0 0x91 // AGC Control
#define CC1101_DEFVAL_WOREVT1 0x87 // High Byte Event0 Timeout
#define CC1101_DEFVAL_WOREVT0 0x6B // Low Byte Event0 Timeout
#define CC1101_DEFVAL_WORCTRL 0xF8 // Wake On Radio Control
#define CC1101_DEFVAL_FREND1 0x56 // Front End RX Configuration
#define CC1101_DEFVAL_FREND0 0x11 // Front End TX Configuration
#define CC1101_DEFVAL_FSCAL3 0xE9 // Frequency Synthesizer Calibration
#define CC1101_DEFVAL_FSCAL2 0x2A // Frequency Synthesizer Calibration
#define CC1101_DEFVAL_FSCAL1 0x00 // Frequency Synthesizer Calibration
#define CC1101_DEFVAL_FSCAL0 0x1F // Frequency Synthesizer Calibration
#define CC1101_DEFVAL_RCCTRL1 0x41 // RC Oscillator Configuration
#define CC1101_DEFVAL_RCCTRL0 0x00 // RC Oscillator Configuration
#define CC1101_DEFVAL_FSTEST 0x59 // Frequency Synthesizer Calibration Control
#define CC1101_DEFVAL_PTEST 0x7F // Production Test
#define CC1101_DEFVAL_AGCTEST 0x3F // AGC Test
#define CC1101_DEFVAL_TEST2 0x88 // Various Test Settings
#define CC1101_DEFVAL_TEST1 0x31 // Various Test Settings
#define CC1101_DEFVAL_TEST0 0x09 // Various Test Settings
/**
* Alias for some default values
*/
#define CCDEF_CHANNR CC1101_DEFVAL_CHANNR
#define CCDEF_SYNC0 CC1101_DEFVAL_SYNC0
#define CCDEF_SYNC1 CC1101_DEFVAL_SYNC1
#define CCDEF_ADDR CC1101_DEFVAL_ADDR
/**
* Macros
*/
// Read CC1101 Config register
#define readConfigReg(regAddr) readReg(regAddr, CC1101_CONFIG_REGISTER)
// Read CC1101 Status register
#define readStatusReg(regAddr) readReg(regAddr, CC1101_STATUS_REGISTER)
// Enter Rx state
//#define setRxState() cmdStrobe(CC1101_SRX)
// Enter Tx state
//#define setTxState() cmdStrobe(CC1101_STX)
// Enter IDLE state
#define setIdleState() cmdStrobe(CC1101_SIDLE)
// Flush Rx FIFO
#define flushRxFifo() cmdStrobe(CC1101_SFRX)
// Flush Tx FIFO
#define flushTxFifo() cmdStrobe(CC1101_SFTX)
// Disable address check
#define disableAddressCheck() writeReg(CC1101_PKTCTRL1, 0x04)
// Enable address check
#define enableAddressCheck() writeReg(CC1101_PKTCTRL1, 0x06)
// Disable CCA
#define disableCCA() writeReg(CC1101_MCSM1, 0)
// Enable CCA
#define enableCCA() writeReg(CC1101_MCSM1, CC1101_DEFVAL_MCSM1)
// Set PATABLE single byte
#define setTxPowerAmp(setting) paTableByte = setting
// PATABLE values
#define PA_LowPower 0x60
#define PA_LongDistance 0xC0
/**
* Class: CC1101
*
* Description:
* CC1101 interface
*/
class CC1101
{
private:
/**
* Atmega's SPI interface
*/
SPIClass spi;
/**
* writeBurstReg
*
* Write multiple registers into the CC1101 IC via SPI
*
* 'regAddr' Register address
* 'buffer' Data to be writen
* 'len' Data length
*/
void writeBurstReg(uint8_t regAddr, uint8_t* buffer, uint8_t len);
/**
* readBurstReg
*
* Read burst data from CC1101 via SPI
*
* 'buffer' Buffer where to copy the result to
* 'regAddr' Register address
* 'len' Data length
*/
void readBurstReg(uint8_t * buffer, uint8_t regAddr, uint8_t len);
/**
* setRegsFromEeprom
*
* Set registers from EEPROM
*/
void setRegsFromEeprom(void);
public:
/*
* RF state
*/
uint8_t rfState;
/**
* Tx Power byte (single PATABLE config)
*/
uint8_t paTableByte;
/**
* Carrier frequency
*/
uint8_t carrierFreq;
/**
* Frequency channel
*/
uint8_t channel;
/**
* Synchronization word
*/
uint8_t syncWord[2];
/**
* Device address
*/
uint8_t devAddress;
/**
* CC1101
*
* Class constructor
*/
CC1101(void);
/**
* cmdStrobe
*
* Send command strobe to the CC1101 IC via SPI
*
* 'cmd' Command strobe
*/
void cmdStrobe(uint8_t cmd);
/**
* wakeUp
*
* Wake up CC1101 from Power Down state
*/
void wakeUp(void);
/**
* readReg
*
* Read CC1101 register via SPI
*
* 'regAddr' Register address
* 'regType' Type of register: CC1101_CONFIG_REGISTER or CC1101_STATUS_REGISTER
*
* Return:
* Data byte returned by the CC1101 IC
*/
uint8_t readReg(uint8_t regAddr, uint8_t regType);
/**
* writeReg
*
* Write single register into the CC1101 IC via SPI
*
* 'regAddr' Register address
* 'value' Value to be writen
*/
void writeReg(uint8_t regAddr, uint8_t value);
/**
* setCCregs
*
* Configure CC1101 registers
*/
void setCCregs(void);
/**
* reset
*
* Reset CC1101
*/
void reset(void);
/**
* init
*
* Initialize CC1101 radio
*
* @param freq Carrier frequency
*/
void init(uint8_t freq=CFREQ_868);
/**
* setSyncWord
*
* Set synchronization word
*
* 'syncH' Synchronization word - High byte
* 'syncL' Synchronization word - Low byte
*/
void setSyncWord(uint8_t syncH, uint8_t syncL);
/**
* setSyncWord (overriding method)
*
* Set synchronization word
*
* 'syncH' Synchronization word - pointer to 2-byte array
*/
void setSyncWord(uint8_t *sync);
/**
* setDevAddress
*
* Set device address
*
* 'addr' Device address
*/
void setDevAddress(uint8_t addr);
/**
* setCarrierFreq
*
* Set carrier frequency
*
* 'freq' New carrier frequency
*/
void setCarrierFreq(uint8_t freq);
/**
* setChannel
*
* Set frequency channel
*
* 'chnl' Frequency channel
*/
void setChannel(uint8_t chnl);
/**
* setPowerDownState
*
* Put CC1101 into power-down state
*/
void setPowerDownState();
/**
* sendData
*
* Send data packet via RF
*
* 'packet' Packet to be transmitted. First byte is the destination address
*
* Return:
* True if the transmission succeeds
* False otherwise
*/
bool sendData(CCPACKET packet);
/**
* receiveData
*
* Read data packet from RX FIFO
*
* Return:
* Amount of bytes received
*/
uint8_t receiveData(CCPACKET *packet);
/**
* setRxState
*
* Enter Rx state
*/
void setRxState(void);
/**
* setTxState
*
* Enter Tx state
*/
void setTxState(void);
};
#endif

549
lib/cc1101/cc1101.h.txt Normal file
View File

@ -0,0 +1,549 @@
#include <SPI.h>
/**
* Copyright (c) 2011 panStamp <contact@panstamp.com>
*
* This file is part of the panStamp project.
*
* panStamp is free software; you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* any later version.
*
* panStamp is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with panStamp; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
* USA
*
* Author: Daniel Berenguer
* Creation date: 03/03/2011
*/
#ifndef _CC1101_H
#define _CC1101_H
//#include "simplespi.h"
extern "C" {
#include <stdint.h>
#include "ccpacket.h"
}
/**
* Carrier frequencies
*/
enum CFREQ
{
CFREQ_868 = 0,
CFREQ_915,
CFREQ_433,
CFREQ_918,
CFREQ_LAST
};
/**
* RF STATES
*/
enum RFSTATE
{
RFSTATE_IDLE = 0,
RFSTATE_RX,
RFSTATE_TX
};
/**
* Frequency channels
*/
#define NUMBER_OF_FCHANNELS 10
/**
* Type of transfers
*/
#define WRITE_BURST 0x40
#define READ_SINGLE 0x80
#define READ_BURST 0xC0
/**
* Type of register
*/
#define CC1101_CONFIG_REGISTER READ_SINGLE
#define CC1101_STATUS_REGISTER READ_BURST
/**
* PATABLE & FIFO's
*/
#define CC1101_PATABLE 0x3E // PATABLE address
#define CC1101_TXFIFO 0x3F // TX FIFO address
#define CC1101_RXFIFO 0x3F // RX FIFO address
/**
* Command strobes
*/
#define CC1101_SRES 0x30 // Reset CC1101 chip
#define CC1101_SFSTXON 0x31 // Enable and calibrate frequency synthesizer (if MCSM0.FS_AUTOCAL=1). If in RX (with CCA):
// Go to a wait state where only the synthesizer is running (for quick RX / TX turnaround).
#define CC1101_SXOFF 0x32 // Turn off crystal oscillator
#define CC1101_SCAL 0x33 // Calibrate frequency synthesizer and turn it off. SCAL can be strobed from IDLE mode without
// setting manual calibration mode (MCSM0.FS_AUTOCAL=0)
#define CC1101_SRX 0x34 // Enable RX. Perform calibration first if coming from IDLE and MCSM0.FS_AUTOCAL=1
#define CC1101_STX 0x35 // In IDLE state: Enable TX. Perform calibration first if MCSM0.FS_AUTOCAL=1.
// If in RX state and CCA is enabled: Only go to TX if channel is clear
#define CC1101_SIDLE 0x36 // Exit RX / TX, turn off frequency synthesizer and exit Wake-On-Radio mode if applicable
#define CC1101_SWOR 0x38 // Start automatic RX polling sequence (Wake-on-Radio) as described in Section 19.5 if
// WORCTRL.RC_PD=0
#define CC1101_SPWD 0x39 // Enter power down mode when CSn goes high
#define CC1101_SFRX 0x3A // Flush the RX FIFO buffer. Only issue SFRX in IDLE or RXFIFO_OVERFLOW states
#define CC1101_SFTX 0x3B // Flush the TX FIFO buffer. Only issue SFTX in IDLE or TXFIFO_UNDERFLOW states
#define CC1101_SWORRST 0x3C // Reset real time clock to Event1 value
#define CC1101_SNOP 0x3D // No operation. May be used to get access to the chip status byte
/**
* CC1101 configuration registers
*/
#define CC1101_IOCFG2 0x00 // GDO2 Output Pin Configuration
#define CC1101_IOCFG1 0x01 // GDO1 Output Pin Configuration
#define CC1101_IOCFG0 0x02 // GDO0 Output Pin Configuration
#define CC1101_FIFOTHR 0x03 // RX FIFO and TX FIFO Thresholds
#define CC1101_SYNC1 0x04 // Sync Word, High Byte
#define CC1101_SYNC0 0x05 // Sync Word, Low Byte
#define CC1101_PKTLEN 0x06 // Packet Length
#define CC1101_PKTCTRL1 0x07 // Packet Automation Control
#define CC1101_PKTCTRL0 0x08 // Packet Automation Control
#define CC1101_ADDR 0x09 // Device Address
#define CC1101_CHANNR 0x0A // Channel Number
#define CC1101_FSCTRL1 0x0B // Frequency Synthesizer Control
#define CC1101_FSCTRL0 0x0C // Frequency Synthesizer Control
#define CC1101_FREQ2 0x0D // Frequency Control Word, High Byte
#define CC1101_FREQ1 0x0E // Frequency Control Word, Middle Byte
#define CC1101_FREQ0 0x0F // Frequency Control Word, Low Byte
#define CC1101_MDMCFG4 0x10 // Modem Configuration
#define CC1101_MDMCFG3 0x11 // Modem Configuration
#define CC1101_MDMCFG2 0x12 // Modem Configuration
#define CC1101_MDMCFG1 0x13 // Modem Configuration
#define CC1101_MDMCFG0 0x14 // Modem Configuration
#define CC1101_DEVIATN 0x15 // Modem Deviation Setting
#define CC1101_MCSM2 0x16 // Main Radio Control State Machine Configuration
#define CC1101_MCSM1 0x17 // Main Radio Control State Machine Configuration
#define CC1101_MCSM0 0x18 // Main Radio Control State Machine Configuration
#define CC1101_FOCCFG 0x19 // Frequency Offset Compensation Configuration
#define CC1101_BSCFG 0x1A // Bit Synchronization Configuration
#define CC1101_AGCCTRL2 0x1B // AGC Control
#define CC1101_AGCCTRL1 0x1C // AGC Control
#define CC1101_AGCCTRL0 0x1D // AGC Control
#define CC1101_WOREVT1 0x1E // High Byte Event0 Timeout
#define CC1101_WOREVT0 0x1F // Low Byte Event0 Timeout
#define CC1101_WORCTRL 0x20 // Wake On Radio Control
#define CC1101_FREND1 0x21 // Front End RX Configuration
#define CC1101_FREND0 0x22 // Front End TX Configuration
#define CC1101_FSCAL3 0x23 // Frequency Synthesizer Calibration
#define CC1101_FSCAL2 0x24 // Frequency Synthesizer Calibration
#define CC1101_FSCAL1 0x25 // Frequency Synthesizer Calibration
#define CC1101_FSCAL0 0x26 // Frequency Synthesizer Calibration
#define CC1101_RCCTRL1 0x27 // RC Oscillator Configuration
#define CC1101_RCCTRL0 0x28 // RC Oscillator Configuration
#define CC1101_FSTEST 0x29 // Frequency Synthesizer Calibration Control
#define CC1101_PTEST 0x2A // Production Test
#define CC1101_AGCTEST 0x2B // AGC Test
#define CC1101_TEST2 0x2C // Various Test Settings
#define CC1101_TEST1 0x2D // Various Test Settings
#define CC1101_TEST0 0x2E // Various Test Settings
/**
* Status registers
*/
#define CC1101_PARTNUM 0x30 // Chip ID
#define CC1101_VERSION 0x31 // Chip ID
#define CC1101_FREQEST 0x32 // Frequency Offset Estimate from Demodulator
#define CC1101_LQI 0x33 // Demodulator Estimate for Link Quality
#define CC1101_RSSI 0x34 // Received Signal Strength Indication
#define CC1101_MARCSTATE 0x35 // Main Radio Control State Machine State
#define CC1101_WORTIME1 0x36 // High Byte of WOR Time
#define CC1101_WORTIME0 0x37 // Low Byte of WOR Time
#define CC1101_PKTSTATUS 0x38 // Current GDOx Status and Packet Status
#define CC1101_VCO_VC_DAC 0x39 // Current Setting from PLL Calibration Module
#define CC1101_TXBYTES 0x3A // Underflow and Number of Bytes
#define CC1101_RXBYTES 0x3B // Overflow and Number of Bytes
#define CC1101_RCCTRL1_STATUS 0x3C // Last RC Oscillator Calibration Result
#define CC1101_RCCTRL0_STATUS 0x3D // Last RC Oscillator Calibration Result
/**
* CC1101 configuration registers - Default values extracted from SmartRF Studio
*
* Configuration:
*
* Deviation = 20.629883
* Base frequency = 867.999939
* Carrier frequency = 867.999939
* Channel number = 0
* Carrier frequency = 867.999939
* Modulated = true
* Modulation format = GFSK
* Manchester enable = false
* Data whitening = off
* Sync word qualifier mode = 30/32 sync word bits detected
* Preamble count = 4
* Channel spacing = 199.951172
* Carrier frequency = 867.999939
* Data rate = 38.3835 Kbps
* RX filter BW = 101.562500
* Data format = Normal mode
* Length config = Variable packet length mode. Packet length configured by the first byte after sync word
* CRC enable = true
* Packet length = 255
* Device address = 1
* Address config = Enable address check
* Append status = Append two status bytes to the payload of the packet. The status bytes contain RSSI and
* LQI values, as well as CRC OK
* CRC autoflush = false
* PA ramping = false
* TX power = 12
* GDO0 mode = Asserts when sync word has been sent / received, and de-asserts at the end of the packet.
* In RX, the pin will also de-assert when a packet is discarded due to address or maximum length filtering
* or when the radio enters RXFIFO_OVERFLOW state. In TX the pin will de-assert if the TX FIFO underflows
* Settings optimized for low current consumption
*/
//#define CC1101_DEFVAL_IOCFG2 0x29 // GDO2 Output Pin Configuration
#define CC1101_DEFVAL_IOCFG2 0x0D // GDO2 Output Pin Configuration
#define CC1101_DEFVAL_IOCFG1 0x2E // GDO1 Output Pin Configuration
#define CC1101_DEFVAL_IOCFG0 0x2D // GDO0 Output Pin Configuration
#define CC1101_DEFVAL_FIFOTHR 0x07 // RX FIFO and TX FIFO Thresholds
#define CC1101_DEFVAL_SYNC1 0xD3 // Synchronization word, high byte
#define CC1101_DEFVAL_SYNC0 0x91 // Synchronization word, low byte
#define CC1101_DEFVAL_PKTLEN 0x3D // Packet Length
#define CC1101_DEFVAL_PKTCTRL1 0x04 // Packet Automation Control
#define CC1101_DEFVAL_PKTCTRL0 0x32 // Packet Automation Control
#define CC1101_DEFVAL_ADDR 0xFF // Device Address
#define CC1101_DEFVAL_CHANNR 0x00 // Channel Number
#define CC1101_DEFVAL_FSCTRL1 0x06 // Frequency Synthesizer Control
#define CC1101_DEFVAL_FSCTRL0 0x00 // Frequency Synthesizer Control
// Carrier frequency = 868 MHz
#define CC1101_DEFVAL_FREQ2_868 0x21 // Frequency Control Word, High Byte
#define CC1101_DEFVAL_FREQ1_868 0x62 // Frequency Control Word, Middle Byte
#define CC1101_DEFVAL_FREQ0_868 0x76 // Frequency Control Word, Low Byte
// Carrier frequency = 902 MHz
#define CC1101_DEFVAL_FREQ2_915 0x22 // Frequency Control Word, High Byte
#define CC1101_DEFVAL_FREQ1_915 0xB1 // Frequency Control Word, Middle Byte
#define CC1101_DEFVAL_FREQ0_915 0x3B // Frequency Control Word, Low Byte
// Carrier frequency = 918 MHz
#define CC1101_DEFVAL_FREQ2_918 0x23 // Frequency Control Word, High Byte
#define CC1101_DEFVAL_FREQ1_918 0x4E // Frequency Control Word, Middle Byte
#define CC1101_DEFVAL_FREQ0_918 0xC4 // Frequency Control Word, Low Byte
// Carrier frequency = 433 MHz
#define CC1101_DEFVAL_FREQ2_433 0x10 // Frequency Control Word, High Byte
#define CC1101_DEFVAL_FREQ1_433 0xB0 // Frequency Control Word, Middle Byte
#define CC1101_DEFVAL_FREQ0_433 0xB0 // Frequency Control Word, Low Byte
#define CC1101_DEFVAL_MDMCFG4 0xA9 // Modem Configuration
#define CC1101_DEFVAL_MDMCFG3 0xE4 // Modem Configuration
#define CC1101_DEFVAL_MDMCFG2 0x30 // Modem Configuration
#define CC1101_DEFVAL_MDMCFG1 0x22 // Modem Configuration
#define CC1101_DEFVAL_MDMCFG0 0xF8 // Modem Configuration
#define CC1101_DEFVAL_DEVIATN 0x00 // Modem Deviation Setting
#define CC1101_DEFVAL_MCSM2 0x07 // Main Radio Control State Machine Configuration
//#define CC1101_DEFVAL_MCSM1 0x30 // Main Radio Control State Machine Configuration
#define CC1101_DEFVAL_MCSM1 0x30 // Main Radio Control State Machine Configuration
#define CC1101_DEFVAL_MCSM0 0x18 // Main Radio Control State Machine Configuration
#define CC1101_DEFVAL_FOCCFG 0x14 // Frequency Offset Compensation Configuration
#define CC1101_DEFVAL_BSCFG 0x6C // Bit Synchronization Configuration
#define CC1101_DEFVAL_AGCCTRL2 0x04 // AGC Control
#define CC1101_DEFVAL_AGCCTRL1 0x00 // AGC Control
#define CC1101_DEFVAL_AGCCTRL0 0x92 // AGC Control
#define CC1101_DEFVAL_WOREVT1 0x87 // High Byte Event0 Timeout
#define CC1101_DEFVAL_WOREVT0 0x6B // Low Byte Event0 Timeout
#define CC1101_DEFVAL_WORCTRL 0xF8 // Wake On Radio Control
#define CC1101_DEFVAL_FREND1 0xB6 // Front End RX Configuration
#define CC1101_DEFVAL_FREND0 0x11 // Front End TX Configuration
#define CC1101_DEFVAL_FSCAL3 0xE9 // Frequency Synthesizer Calibration
#define CC1101_DEFVAL_FSCAL2 0x2A // Frequency Synthesizer Calibration
#define CC1101_DEFVAL_FSCAL1 0x00 // Frequency Synthesizer Calibration
#define CC1101_DEFVAL_FSCAL0 0x1F // Frequency Synthesizer Calibration
#define CC1101_DEFVAL_RCCTRL1 0x41 // RC Oscillator Configuration
#define CC1101_DEFVAL_RCCTRL0 0x00 // RC Oscillator Configuration
#define CC1101_DEFVAL_FSTEST 0x59 // Frequency Synthesizer Calibration Control
#define CC1101_DEFVAL_PTEST 0x7F // Production Test
#define CC1101_DEFVAL_AGCTEST 0x3F // AGC Test
#define CC1101_DEFVAL_TEST2 0x81 // Various Test Settings
#define CC1101_DEFVAL_TEST1 0x35 // Various Test Settings
#define CC1101_DEFVAL_TEST0 0x09 // Various Test Settings
/**
* Alias for some default values
*/
#define CCDEF_CHANNR CC1101_DEFVAL_CHANNR
#define CCDEF_SYNC0 CC1101_DEFVAL_SYNC0
#define CCDEF_SYNC1 CC1101_DEFVAL_SYNC1
#define CCDEF_ADDR CC1101_DEFVAL_ADDR
/**
* Macros
*/
// Read CC1101 Config register
#define readConfigReg(regAddr) readReg(regAddr, CC1101_CONFIG_REGISTER)
// Read CC1101 Status register
#define readStatusReg(regAddr) readReg(regAddr, CC1101_STATUS_REGISTER)
// Enter Rx state
//#define setRxState() cmdStrobe(CC1101_SRX)
// Enter Tx state
//#define setTxState() cmdStrobe(CC1101_STX)
// Enter IDLE state
#define setIdleState() cmdStrobe(CC1101_SIDLE)
// Flush Rx FIFO
#define flushRxFifo() cmdStrobe(CC1101_SFRX)
// Flush Tx FIFO
#define flushTxFifo() cmdStrobe(CC1101_SFTX)
// Disable address check
#define disableAddressCheck() writeReg(CC1101_PKTCTRL1, 0x04)
// Enable address check
#define enableAddressCheck() writeReg(CC1101_PKTCTRL1, 0x06)
// Disable CCA
#define disableCCA() writeReg(CC1101_MCSM1, 0)
// Enable CCA
#define enableCCA() writeReg(CC1101_MCSM1, CC1101_DEFVAL_MCSM1)
// Set PATABLE single byte
#define setTxPowerAmp(setting) paTableByte = setting
// PATABLE values
#define PA_LowPower 0x60
#define PA_LongDistance 0xC0
/**
* Class: CC1101
*
* Description:
* CC1101 interface
*/
class CC1101
{
private:
/**
* Atmega's SPI interface
*/
SPIClass spi;
/**
* writeBurstReg
*
* Write multiple registers into the CC1101 IC via SPI
*
* 'regAddr' Register address
* 'buffer' Data to be writen
* 'len' Data length
*/
void writeBurstReg(uint8_t regAddr, uint8_t* buffer, uint8_t len);
/**
* readBurstReg
*
* Read burst data from CC1101 via SPI
*
* 'buffer' Buffer where to copy the result to
* 'regAddr' Register address
* 'len' Data length
*/
void readBurstReg(uint8_t * buffer, uint8_t regAddr, uint8_t len);
/**
* setRegsFromEeprom
*
* Set registers from EEPROM
*/
void setRegsFromEeprom(void);
public:
/*
* RF state
*/
uint8_t rfState;
/**
* Tx Power byte (single PATABLE config)
*/
uint8_t paTableByte;
/**
* Carrier frequency
*/
uint8_t carrierFreq;
/**
* Frequency channel
*/
uint8_t channel;
/**
* Synchronization word
*/
uint8_t syncWord[2];
/**
* Device address
*/
uint8_t devAddress;
/**
* CC1101
*
* Class constructor
*/
CC1101(void);
/**
* cmdStrobe
*
* Send command strobe to the CC1101 IC via SPI
*
* 'cmd' Command strobe
*/
void cmdStrobe(uint8_t cmd);
/**
* wakeUp
*
* Wake up CC1101 from Power Down state
*/
void wakeUp(void);
/**
* readReg
*
* Read CC1101 register via SPI
*
* 'regAddr' Register address
* 'regType' Type of register: CC1101_CONFIG_REGISTER or CC1101_STATUS_REGISTER
*
* Return:
* Data byte returned by the CC1101 IC
*/
uint8_t readReg(uint8_t regAddr, uint8_t regType);
/**
* writeReg
*
* Write single register into the CC1101 IC via SPI
*
* 'regAddr' Register address
* 'value' Value to be writen
*/
void writeReg(uint8_t regAddr, uint8_t value);
/**
* setCCregs
*
* Configure CC1101 registers
*/
void setCCregs(void);
/**
* reset
*
* Reset CC1101
*/
void reset(void);
/**
* init
*
* Initialize CC1101 radio
*
* @param freq Carrier frequency
*/
void init(uint8_t freq=CFREQ_868);
/**
* setSyncWord
*
* Set synchronization word
*
* 'syncH' Synchronization word - High byte
* 'syncL' Synchronization word - Low byte
*/
void setSyncWord(uint8_t syncH, uint8_t syncL);
/**
* setSyncWord (overriding method)
*
* Set synchronization word
*
* 'syncH' Synchronization word - pointer to 2-byte array
*/
void setSyncWord(uint8_t *sync);
/**
* setDevAddress
*
* Set device address
*
* 'addr' Device address
*/
void setDevAddress(uint8_t addr);
/**
* setCarrierFreq
*
* Set carrier frequency
*
* 'freq' New carrier frequency
*/
void setCarrierFreq(uint8_t freq);
/**
* setChannel
*
* Set frequency channel
*
* 'chnl' Frequency channel
*/
void setChannel(uint8_t chnl);
/**
* setPowerDownState
*
* Put CC1101 into power-down state
*/
void setPowerDownState();
/**
* sendData
*
* Send data packet via RF
*
* 'packet' Packet to be transmitted. First byte is the destination address
*
* Return:
* True if the transmission succeeds
* False otherwise
*/
bool sendData(CCPACKET packet);
/**
* receiveData
*
* Read data packet from RX FIFO
*
* Return:
* Amount of bytes received
*/
uint8_t receiveData(CCPACKET *packet);
/**
* setRxState
*
* Enter Rx state
*/
void setRxState(void);
/**
* setTxState
*
* Enter Tx state
*/
void setTxState(void);
};
#endif

70
lib/cc1101/ccpacket.h Normal file
View File

@ -0,0 +1,70 @@
/**
* Copyright (c) 2011 panStamp <contact@panstamp.com>
*
* This file is part of the panStamp project.
*
* panStamp is free software; you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published by
* the Free Software Foundation; either version 3 of the License, or
* any later version.
*
* panStamp is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with panStamp; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
* USA
*
* Author: Daniel Berenguer
* Creation date: 06/03/2013
*/
#ifndef _CCPACKET_H
#define _CCPACKET_H
/**
* Buffer and data lengths
*/
#define CCPACKET_BUFFER_LEN 64
#define CCPACKET_DATA_LEN CCPACKET_BUFFER_LEN - 3
/**
* Class: CCPACKET
*
* Description:
* CC1101 data packet class
*/
struct CCPACKET
{
public:
/**
* Data length
*/
unsigned char length;
/**
* Data buffer
*/
unsigned char data[CCPACKET_DATA_LEN];
/**
* CRC OK flag
*/
bool crc_ok;
/**
* Received Strength Signal Indication
*/
unsigned char rssi;
/**
* Link Quality Index
*/
unsigned char lqi;
};
#endif

5
tasmota/CHANGELOG.md
View File

@ -1,5 +1,10 @@
## Unreleased (development)
### 8.1.0.10 20200227
- Change default my_user_config.h driver and sensor support removing most sensors and adding most drivers
- Add support for Jarolift rollers by Keeloq algorithm
### 8.1.0.9 20200220
- Revert most wifi connectivity changes introduced in 8.1.0.5 (#7746, #7602, #7621)

33
tasmota/my_user_config.h
View File

@ -410,14 +410,15 @@
#define USE_SONOFF_IFAN // Add support for Sonoff iFan02 and iFan03 (+2k code)
#define USE_BUZZER // Add support for a buzzer (+0k6 code)
#define USE_ARILUX_RF // Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
//#define USE_SHUTTER // Add Shutter support for up to 4 shutter with different motortypes (+11k code)
#define USE_SHUTTER // Add Shutter support for up to 4 shutter with different motortypes (+11k code)
#define USE_DEEPSLEEP // Add support for deepsleep (+1k code)
//#define USE_EXS_DIMMER // Add support for ES-Store WiFi Dimmer (+1k5 code)
#define USE_EXS_DIMMER // Add support for ES-Store WiFi Dimmer (+1k5 code)
// #define EXS_MCU_CMNDS // Add command to send MCU commands (+0k8 code)
//#define USE_HOTPLUG // Add support for sensor HotPlug
//#define USE_DEVICE_GROUPS // Add support for device groups (+5k6 code)
#define USE_DEVICE_GROUPS // Add support for device groups (+5k6 code)
#define USE_PWM_DIMMER // Add support for MJ-SD01/acenx/NTONPOWER PWM dimmers (+4k5 code)
// #define USE_PWM_DIMMER_REMOTE // Add support for remote switches to PWM Dimmer, also adds device groups support (+0k7 code, also includes device groups)
#define USE_PWM_DIMMER_REMOTE // Add support for remote switches to PWM Dimmer, also adds device groups support (+0k7 code, also includes device groups)
//#define USE_KEELOQ // Add support for Jarolift rollers by Keeloq algorithm (+4k5 code)
// -- Optional light modules ----------------------
#define USE_WS2812 // WS2812 Led string using library NeoPixelBus (+5k code, +1k mem, 232 iram) - Disable by //
@ -443,25 +444,25 @@
#define USE_I2C // I2C using library wire (+10k code, 0k2 mem, 124 iram)
#ifdef USE_I2C
#define USE_SHT // [I2cDriver8] Enable SHT1X sensor (+1k4 code)
#define USE_HTU // [I2cDriver9] Enable HTU21/SI7013/SI7020/SI7021 sensor (I2C address 0x40) (+1k5 code)
#define USE_BMP // [I2cDriver10] Enable BMP085/BMP180/BMP280/BME280 sensors (I2C addresses 0x76 and 0x77) (+4k4 code)
// #define USE_SHT // [I2cDriver8] Enable SHT1X sensor (+1k4 code)
// #define USE_HTU // [I2cDriver9] Enable HTU21/SI7013/SI7020/SI7021 sensor (I2C address 0x40) (+1k5 code)
// #define USE_BMP // [I2cDriver10] Enable BMP085/BMP180/BMP280/BME280 sensors (I2C addresses 0x76 and 0x77) (+4k4 code)
// #define USE_BME680 // Enable support for BME680 sensor using Bosch BME680 library (+4k code)
#define USE_BH1750 // [I2cDriver11] Enable BH1750 sensor (I2C address 0x23 or 0x5C) (+0k5 code)
// #define USE_BH1750 // [I2cDriver11] Enable BH1750 sensor (I2C address 0x23 or 0x5C) (+0k5 code)
// #define USE_VEML6070 // [I2cDriver12] Enable VEML6070 sensor (I2C addresses 0x38 and 0x39) (+1k5 code)
#define USE_VEML6070_RSET 270000 // VEML6070, Rset in Ohm used on PCB board, default 270K = 270000ohm, range for this sensor: 220K ... 1Meg
#define USE_VEML6070_SHOW_RAW // VEML6070, shows the raw value of UV-A
// #define USE_ADS1115 // [I2cDriver13] Enable ADS1115 16 bit A/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) based on Adafruit ADS1x15 library (no library needed) (+0k7 code)
// #define USE_INA219 // [I2cDriver14] Enable INA219 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+1k code)
// #define USE_INA226 // [I2cDriver35] Enable INA226 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+2k3 code)
#define USE_SHT3X // [I2cDriver15] Enable SHT3x (I2C address 0x44 or 0x45) or SHTC3 (I2C address 0x70) sensor (+0k7 code)
// #define USE_SHT3X // [I2cDriver15] Enable SHT3x (I2C address 0x44 or 0x45) or SHTC3 (I2C address 0x70) sensor (+0k7 code)
// #define USE_TSL2561 // [I2cDriver16] Enable TSL2561 sensor (I2C address 0x29, 0x39 or 0x49) using library Joba_Tsl2561 (+2k3 code)
// #define USE_TSL2591 // [I2cDriver40] Enable TSL2591 sensor (I2C address 0x29) using library Adafruit_TSL2591 (+1k6 code)
// #define USE_MGS // [I2cDriver17] Enable Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)
#define MGS_SENSOR_ADDR 0x04 // Default Mutichannel Gas sensor i2c address
// #define USE_SGP30 // [I2cDriver18] Enable SGP30 sensor (I2C address 0x58) (+1k1 code)
// #define USE_SI1145 // [I2cDriver19] Enable SI1145/46/47 sensor (I2C address 0x60) (+1k code)
#define USE_LM75AD // [I2cDriver20] Enable LM75AD sensor (I2C addresses 0x48 - 0x4F) (+0k5 code)
// #define USE_LM75AD // [I2cDriver20] Enable LM75AD sensor (I2C addresses 0x48 - 0x4F) (+0k5 code)
// #define USE_APDS9960 // [I2cDriver21] Enable APDS9960 Proximity Sensor (I2C address 0x39). Disables SHT and VEML6070 (+4k7 code)
// #define USE_MCP230xx // [I2cDriver22] Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
// #define USE_MCP230xx_ADDR 0x20 // Enable MCP23008/MCP23017 I2C Address to use (Must be within range 0x20 through 0x26 - set according to your wired setup)
@ -530,13 +531,13 @@
#endif // USE_SPI
// -- Serial sensors ------------------------------
#define USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code)
#define USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
//#define USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code)
//#define USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
#define CO2_LOW 800 // Below this CO2 value show green light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
#define CO2_HIGH 1200 // Above this CO2 value show red light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
#define USE_PMS5003 // Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)
//#define USE_PMS5003 // Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)
//#define PMS_MODEL_PMS3003 // Enable support of PMS3003 instead of PMS5003/PMS7003 (needs the USE_PMS5003 above)
#define USE_NOVA_SDS // Add support for SDS011 and SDS021 particle concentration sensor (+1k5 code)
//#define USE_NOVA_SDS // Add support for SDS011 and SDS021 particle concentration sensor (+1k5 code)
#define STARTING_OFFSET 30 // Turn on NovaSDS XX-seconds before tele_period is reached
//#define USE_HPMA // Add support for Honeywell HPMA115S0 particle concentration sensor (+1k4)
#define USE_SERIAL_BRIDGE // Add support for software Serial Bridge (+0k8 code)
@ -618,10 +619,10 @@
// -- Other sensors/drivers -----------------------
#define USE_SR04 // Add support for HC-SR04 ultrasonic devices (+1k code)
//#define USE_SR04 // Add support for HC-SR04 ultrasonic devices (+1k code)
//#define USE_TM1638 // Add support for TM1638 switches copying Switch1 .. Switch8 (+1k code)
#define USE_HX711 // Add support for HX711 load cell (+1k5 code)
//#define USE_HX711 // Add support for HX711 load cell (+1k5 code)
// #define USE_HX711_GUI // Add optional web GUI to HX711 as scale (+1k8 code)
// Select none or only one of the below defines

12
tasmota/settings.h
View File

@ -105,9 +105,9 @@ typedef union { // Restricted by MISRA-C Rule 18.4 bu
uint32_t zigbee_use_names : 1; // bit 1 (v8.1.0.4) - SetOption83 - Use FriendlyNames instead of ShortAddresses when possible
uint32_t awsiot_shadow : 1; // bit 2 (v8.1.0.5) - SetOption84 - (AWS IoT) publish MQTT state to a device shadow
uint32_t device_groups_enabled : 1; // bit 3 (v8.1.0.9) - SetOption85 - Enable Device Groups
uint32_t led_timeout : 1; // bit 4 (v8.1.0.9) - SetOption86 - Turn brightness LED's off 5 seconds after last change
uint32_t powered_off_led : 1; // bit 5 (v8.1.0.9) - SetOption87 - Turn red LED on when powered off
uint32_t remote_device_mode : 1; // bit 6 (v8.1.0.9) - SetOption88 - Buttons control remote devices
uint32_t led_timeout : 1; // bit 4 (v8.1.0.9) - SetOption86 - PWM Dimmer Turn brightness LED's off 5 seconds after last change
uint32_t powered_off_led : 1; // bit 5 (v8.1.0.9) - SetOption87 - PWM Dimmer Turn red LED on when powered off
uint32_t remote_device_mode : 1; // bit 6 (v8.1.0.9) - SetOption88 - PWM Dimmer Buttons control remote devices
uint32_t spare07 : 1;
uint32_t spare08 : 1;
uint32_t spare09 : 1;
@ -470,8 +470,12 @@ struct SYSCFG {
uint8_t bri_preset_low; // F06
uint8_t bri_preset_high; // F07
uint8_t free_f05[196]; // F08
uint8_t free_f08[180]; // F08
uint32_t keeloq_master_msb; // FBC
uint32_t keeloq_master_lsb; // FC0
uint32_t keeloq_serial; // FC4
uint32_t keeloq_count; // FC8
uint32_t device_group_share_in; // FCC - Bitmask of device group items imported
uint32_t device_group_share_out; // FD0 - Bitmask of device group items exported
uint32_t bootcount_reset_time; // FD4

9
tasmota/support_features.ino
View File

@ -519,9 +519,12 @@ void GetFeatures(void)
#ifdef USE_WEMOS_MOTOR_V1
feature5 |= 0x20000000; // xdrv_34_wemos_motor_v1.ino
#endif
// feature5 |= 0x40000000;
// feature5 |= 0x80000000;
#ifdef USE_DEVICE_GROUPS
feature5 |= 0x40000000; // support_device_groups.ino
#endif
#ifdef USE_PWM_DIMMER
feature5 |= 0x80000000; // xdrv_35_pwm_dimmer
#endif
/*********************************************************************************************/

19
tasmota/tasmota_post.h
View File

@ -106,16 +106,17 @@ extern "C" void custom_crash_callback(struct rst_info * rst_info, uint32_t stack
#ifndef TUYA_DIMMER_ID
#define TUYA_DIMMER_ID 0 // Default dimmer Id
#endif
//#define USE_ARMTRONIX_DIMMERS // Add support for Armtronix Dimmers (+1k4 code)
#undef USE_ARMTRONIX_DIMMERS // Disable support for Armtronix Dimmers (+1k4 code)
#define USE_PS_16_DZ // Add support for PS-16-DZ Dimmer (+2k code)
#define USE_SONOFF_IFAN // Add support for Sonoff iFan02 and iFan03 (+2k code)
#define USE_BUZZER // Add support for a buzzer (+0k6 code)
#define USE_ARILUX_RF // Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
//#define USE_SHUTTER // Add Shutter support for up to 4 shutter with different motortypes (+6k code)
#undef USE_SHUTTER // Disable Shutter support for up to 4 shutter with different motortypes (+6k code)
#define USE_DEEPSLEEP // Add support for deepsleep (+1k code)
#define USE_EXS_DIMMER // Add support for EX-Store WiFi Dimmer
#undef USE_EXS_DIMMER // Disable support for EX-Store WiFi Dimmer
#define USE_HOTPLUG // Add support for sensor HotPlug
#define USE_PWM_DIMMER // Add support for MJ-SD01/acenx/NTONPOWER PWM dimmers (+4k5 code)
#undef USE_DEVICE_GROUPS // Disable support for device groups (+5k6 code)
#undef USE_PWM_DIMMER // Disable support for MJ-SD01/acenx/NTONPOWER PWM dimmers (+4k5 code)
// -- Optional light modules ----------------------
#define USE_LIGHT // Add Dimmer/Light support
@ -153,8 +154,6 @@ extern "C" void custom_crash_callback(struct rst_info * rst_info, uint32_t stack
#define USE_SGP30 // Add I2C code for SGP30 sensor (+1k1 code)
//#define USE_SI1145 // Add I2C code for SI1145/46/47 sensor (+1k code)
#define USE_LM75AD // Add I2C code for LM75AD sensor (+0k5 code)
#define USE_DHT12 // Add I2C code for DHT12 temperature and humidity sensor (+0k7 code)
#define USE_DS1624 // Add I2C code for DS1624, DS1621 sensor
//#define USE_APDS9960 // Add I2C code for APDS9960 Proximity Sensor. Disables SHT and VEML6070 (+4k7 code)
//#define USE_MCP230xx // Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
// #define USE_MCP230xx_ADDR 0x20 // Enable MCP23008/MCP23017 I2C Address to use (Must be within range 0x20 through 0x27 - set according to your wired setup)
@ -164,7 +163,7 @@ extern "C" void custom_crash_callback(struct rst_info * rst_info, uint32_t stack
// #define USE_PCA9685_ADDR 0x40 // Enable PCA9685 I2C Address to use (Must be within range 0x40 through 0x47 - set according to your wired setup)
// #define USE_PCA9685_FREQ 50 // Define default PWM frequency in Hz to be used (must be within 24 to 1526) - If other value is used, it will rever to 50Hz
//#define USE_MPR121 // Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
//#define USE_CCS811 // Add I2C code for CCS811 sensor (+2k2 code)
#define USE_CCS811 // Add I2C code for CCS811 sensor (+2k2 code)
//#define USE_MPU6050 // Enable MPU6050 sensor (I2C address 0x68 AD0 low or 0x69 AD0 high) (+2k6 code)
//#define USE_DS3231 // Enable DS3231 external RTC in case no Wifi is avaliable. See docs in the source file (+1k2 code)
//#define USE_MGC3130 // Enable MGC3130 Electric Field Effect Sensor (I2C address 0x42) (+2k7 code, 0k3 mem)
@ -178,6 +177,8 @@ extern "C" void custom_crash_callback(struct rst_info * rst_info, uint32_t stack
//#define USE_PAJ7620 // Enable PAJ7620 gesture sensor (I2C address 0x73) (+2.5k code)
//#define USE_PCF8574 // Enable PCF8574 I/O Expander (I2C addresses 0x20 - 0x26 and 0x39 - 0x3F) (+1k9 code)
#define USE_HIH6 // Enable Honywell HIH Humidity and Temperature sensor (I2C address 0x27) (+0k6)
#define USE_DHT12 // Add I2C code for DHT12 temperature and humidity sensor (+0k7 code)
#define USE_DS1624 // Add I2C code for DS1624, DS1621 sensor
//#define USE_AHT1x // Enable AHT10/15 humidity and temperature sensor (I2C address 0x38) (+0k8 code)
#define USE_WEMOS_MOTOR_V1 // Enable Wemos motor driver V1 (I2C addresses 0x2D - 0x30) (+0k7 code)
#define WEMOS_MOTOR_V1_ADDR 0x30 // Default I2C address 0x30
@ -260,6 +261,7 @@ extern "C" void custom_crash_callback(struct rst_info * rst_info, uint32_t stack
#undef USE_EMULATION // Disable Belkin WeMo and Hue Bridge emulation for Alexa (-16k code, -2k mem)
#undef USE_EMULATION_HUE // Disable Hue Bridge emulation for Alexa (+14k code, +2k mem common)
#undef USE_EMULATION_WEMO // Disable Belkin WeMo emulation for Alexa (+6k code, +2k mem common)
#undef USE_DEEPSLEEP // Disable support for deepsleep (+1k code)
#undef USE_DEVICE_GROUPS // Disable support for device groups (+3k5 code)
#undef USE_PWM_DIMMER_REMOTE // Disbale support for remote switches to PWM Dimmer
#undef DEBUG_THEO // Disable debug code
@ -488,6 +490,9 @@ extern "C" void custom_crash_callback(struct rst_info * rst_info, uint32_t stack
#undef USE_DEEPSLEEP // Disable support for deepsleep (+1k code)
#undef USE_EXS_DIMMER // Disable support for EX-Store WiFi Dimmer
#undef USE_HOTPLUG // Disable support for HotPlug
#undef USE_DEVICE_GROUPS // Disable support for device groups (+3k5 code)
#undef USE_PWM_DIMMER // Disable support for MJ-SD01/acenx/NTONPOWER PWM dimmers (+4k5 code)
#undef USE_PWM_DIMMER_REMOTE // Disbale support for remote switches to PWM Dimmer
// -- Optional light modules ----------------------
//#undef USE_LIGHT // Also disable all Dimmer/Light support

19
tasmota/tasmota_template.h
View File

@ -419,6 +419,7 @@ enum SupportedModules {
SONOFF_IFAN03,
EXS_DIMMER,
PWM_DIMMER,
SONOFF_D1,
MAXMODULE};
#define USER_MODULE 255
@ -808,6 +809,9 @@ const uint8_t kModuleNiceList[] PROGMEM = {
SONOFF_T11,
SONOFF_T12,
SONOFF_T13,
#ifdef USE_SONOFF_D1
SONOFF_D1, // Sonoff D1
#endif
SONOFF_LED, // Sonoff Light Devices
SONOFF_BN,
#ifdef USE_SONOFF_L1
@ -2235,6 +2239,21 @@ const mytmplt kModules[MAXMODULE] PROGMEM = {
GPIO_KEY1_INV, // GPIO15 Power button
GPIO_REL1_INV, // GPIO16 Power relay/Level 1 LED
0
},
{ "Sonoff D1", // SONOFF_D1 - Sonoff D1 RF Dimmer 433 (ESP8285)
GPIO_USER, // GPIO00 Pad
GPIO_TXD, // GPIO01 D1 control
0, // GPIO02
GPIO_RXD, // GPIO03 D1 control
0, // GPIO04 DEBUG_RX
0, // GPIO05 DEBUG_TX
// GPIO06 (SD_CLK Flash)
// GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
// GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
0, // GPIO09
0, // GPIO10
// GPIO11 (SD_CMD Flash)
0, 0, 0, 0, 0, 0
}
};

2
tasmota/tasmota_version.h
View File

@ -20,7 +20,7 @@
#ifndef _TASMOTA_VERSION_H_
#define _TASMOTA_VERSION_H_
const uint32_t VERSION = 0x08010009;
const uint32_t VERSION = 0x0801000A;
// Lowest compatible version
const uint32_t VERSION_COMPATIBLE = 0x07010006;

273
tasmota/xdrv_36_keeloq.ino Normal file
View File

@ -0,0 +1,273 @@
/*
xdrv_36
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_KEELOQ
#define XDRV_36 36
#include "cc1101.h"
#include <KeeloqLib.h>
#define SYNC_WORD 199
#define Lowpulse 400
#define Highpulse 800
#define TX_PORT 4 // Outputport for transmission
#define RX_PORT 5 // Inputport for reception
const char kJaroliftCommands[] PROGMEM = "Keeloq|" // prefix
"SendRaw|SendButton|Set";
void (* const jaroliftCommand[])(void) PROGMEM = {
&CmndSendRaw, &CmdSendButton, &CmdSet};
CC1101 cc1101;
struct JAROLIFT_DEVICE {
int device_key_msb = 0x0; // stores cryptkey MSB
int device_key_lsb = 0x0; // stores cryptkey LSB
uint64_t button = 0x0; // 1000=0x8 up, 0100=0x4 stop, 0010=0x2 down, 0001=0x1 learning
int disc = 0x0100; // 0x0100 for single channel remote
uint32_t enc = 0x0; // stores the 32Bit encrypted code
uint64_t pack = 0; // Contains data to send.
int count = 0;
uint32_t serial = 0x0;
} jaroliftDevice;
void CmdSet(void)
{
if (XdrvMailbox.data_len > 0) {
if (XdrvMailbox.payload > 0) {
char *p;
uint32_t i = 0;
uint32_t param[4] = { 0 };
for (char *str = strtok_r(XdrvMailbox.data, ", ", &p); str && i < 4; str = strtok_r(nullptr, ", ", &p)) {
param[i] = strtoul(str, nullptr, 0);
i++;
}
for (uint32_t i = 0; i < 3; i++) {
if (param[i] < 1) { param[i] = 1; } // msb, lsb, serial, counter
}
DEBUG_DRIVER_LOG(LOG_LEVEL_DEBUG_MORE, PSTR("params: %08x %08x %08x %08x"), param[0], param[1], param[2], param[3]);
Settings.keeloq_master_msb = param[0];
Settings.keeloq_master_lsb = param[1];
Settings.keeloq_serial = param[2];
Settings.keeloq_count = param[3];
jaroliftDevice.serial = param[2];
jaroliftDevice.count = param[3];
GenerateDeviceCryptKey();
ResponseCmndDone();
} else {
DEBUG_DRIVER_LOG(LOG_LEVEL_DEBUG_MORE, PSTR("no payload"));
}
} else {
DEBUG_DRIVER_LOG(LOG_LEVEL_DEBUG_MORE, PSTR("no param"));
}
}
void GenerateDeviceCryptKey()
{
Keeloq k(Settings.keeloq_master_msb, Settings.keeloq_master_lsb);
jaroliftDevice.device_key_msb = k.decrypt(jaroliftDevice.serial | 0x60000000L);
jaroliftDevice.device_key_lsb = k.decrypt(jaroliftDevice.serial | 0x20000000L);
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("generated device keys: %08x %08x"), jaroliftDevice.device_key_msb, jaroliftDevice.device_key_lsb);
}
void CmdSendButton(void)
{
noInterrupts();
entertx();
if (XdrvMailbox.data_len > 0)
{
if (XdrvMailbox.payload > 0)
{
jaroliftDevice.button = strtoul(XdrvMailbox.data, nullptr, 0);
DEBUG_DRIVER_LOG(LOG_LEVEL_DEBUG_MORE, PSTR("msb: %08x"), jaroliftDevice.device_key_msb);
DEBUG_DRIVER_LOG(LOG_LEVEL_DEBUG_MORE, PSTR("lsb: %08x"), jaroliftDevice.device_key_lsb);
DEBUG_DRIVER_LOG(LOG_LEVEL_DEBUG_MORE, PSTR("serial: %08x"), jaroliftDevice.serial);
DEBUG_DRIVER_LOG(LOG_LEVEL_DEBUG_MORE, PSTR("disc: %08x"), jaroliftDevice.disc);
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("KLQ: count: %08x"), jaroliftDevice.count);
CreateKeeloqPacket();
jaroliftDevice.count++;
Settings.keeloq_count = jaroliftDevice.count;
for(int repeat = 0; repeat <= 1; repeat++)
{
uint64_t bitsToSend = jaroliftDevice.pack;
digitalWrite(TX_PORT, LOW);
delayMicroseconds(1150);
SendSyncPreamble(13);
delayMicroseconds(3500);
for(int i=72; i>0; i--)
{
SendBit(bitsToSend & 0x0000000000000001);
bitsToSend >>= 1;
}
DEBUG_DRIVER_LOG(LOG_LEVEL_DEBUG_MORE, PSTR("finished sending bits at %d"), micros());
delay(16); // delay in loop context is save for wdt
}
}
}
interrupts();
enterrx();
ResponseCmndDone();
}
void SendBit(byte bitToSend)
{
if (bitToSend==1)
{
digitalWrite(TX_PORT, LOW); // Simple encoding of bit state 1
delayMicroseconds(Lowpulse);
digitalWrite(TX_PORT, HIGH);
delayMicroseconds(Highpulse);
}
else
{
digitalWrite(TX_PORT, LOW); // Simple encoding of bit state 0
delayMicroseconds(Highpulse);
digitalWrite(TX_PORT, HIGH);
delayMicroseconds(Lowpulse);
}
}
void CmndSendRaw(void)
{
DEBUG_DRIVER_LOG(LOG_LEVEL_DEBUG_MORE, PSTR("cmd send called at %d"), micros());
noInterrupts();
entertx();
for(int repeat = 0; repeat <= 1; repeat++)
{
if (XdrvMailbox.data_len > 0)
{
digitalWrite(TX_PORT, LOW);
delayMicroseconds(1150);
SendSyncPreamble(13);
delayMicroseconds(3500);
for(int i=XdrvMailbox.data_len-1; i>=0; i--)
{
SendBit(XdrvMailbox.data[i] == '1');
}
DEBUG_DRIVER_LOG(LOG_LEVEL_DEBUG_MORE, PSTR("finished sending bits at %d"), micros());
delay(16); // delay in loop context is save for wdt
}
interrupts();
}
enterrx();
ResponseCmndDone();
}
void enterrx() {
unsigned char marcState = 0;
cc1101.setRxState();
delay(2);
unsigned long rx_time = micros();
while (((marcState = cc1101.readStatusReg(CC1101_MARCSTATE)) & 0x1F) != 0x0D )
{
if (micros() - rx_time > 50000) break; // Quit when marcState does not change...
}
}
void entertx() {
unsigned char marcState = 0;
cc1101.setTxState();
delay(2);
unsigned long rx_time = micros();
while (((marcState = cc1101.readStatusReg(CC1101_MARCSTATE)) & 0x1F) != 0x13 && 0x14 && 0x15)
{
if (micros() - rx_time > 50000) break; // Quit when marcState does not change...
}
}
void SendSyncPreamble(int l)
{
for (int i = 0; i < l; ++i)
{
digitalWrite(TX_PORT, LOW);
delayMicroseconds(400);
digitalWrite(TX_PORT, HIGH);
delayMicroseconds(380);
}
}
void CreateKeeloqPacket()
{
Keeloq k(jaroliftDevice.device_key_msb, jaroliftDevice.device_key_lsb);
unsigned int result = (jaroliftDevice.disc << 16) | jaroliftDevice.count;
jaroliftDevice.pack = (uint64_t)0;
jaroliftDevice.pack |= jaroliftDevice.serial & 0xfffffffL;
jaroliftDevice.pack |= (jaroliftDevice.button & 0xfL) << 28;
jaroliftDevice.pack <<= 32;
jaroliftDevice.enc = k.encrypt(result);
jaroliftDevice.pack |= jaroliftDevice.enc;
AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("pack high: %08x"), jaroliftDevice.pack>>32);
AddLog_P2(LOG_LEVEL_DEBUG_MORE, PSTR("pack low: %08x"), jaroliftDevice.pack);
}
void InitKeeloq()
{
DEBUG_DRIVER_LOG(LOG_LEVEL_DEBUG_MORE, PSTR("cc1101.init()"));
delay(100);
cc1101.init();
AddLog_P(LOG_LEVEL_DEBUG_MORE, PSTR("CC1101 done."));
cc1101.setSyncWord(SYNC_WORD, false);
cc1101.setCarrierFreq(CFREQ_433);
cc1101.disableAddressCheck();
pinMode(TX_PORT, OUTPUT);
pinMode(RX_PORT, INPUT_PULLUP);
jaroliftDevice.serial = Settings.keeloq_serial;
jaroliftDevice.count = Settings.keeloq_count;
GenerateDeviceCryptKey();
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xdrv36(uint8_t function)
{
bool result = false;
switch (function) {
case FUNC_INIT:
InitKeeloq();
DEBUG_DRIVER_LOG(LOG_LEVEL_DEBUG_MORE, PSTR("init done."));
break;
case FUNC_COMMAND:
AddLog_P(LOG_LEVEL_DEBUG_MORE, PSTR("calling command"));
result = DecodeCommand(kJaroliftCommands, jaroliftCommand);
break;
}
return result;
}
#endif // USE_KEELOQ

9
tools/decode-status.py
View File

@ -139,13 +139,16 @@ a_setoption = [[
"Reduced CT range for Alexa",
"Use FriendlyNames instead of ShortAddresses when possible",
"(AWS IoT) publish MQTT state to a device shadow",
"Enable Device Groups",
"PWM Dimmer Turn brightness LED's off 5 seconds after last change",
"PWM Dimmer Turn red LED on when powered off",
"PWM Dimmer Buttons control remote devices",
"",
"","","","",
"","","","",
"","","","",
"","","","",
"","","","",
"","","","",
"","","",""
]]
@ -193,7 +196,7 @@ a_features = [[
"USE_ARDUINO_SLAVE","USE_HIH6","USE_HPMA","USE_TSL2591",
"USE_DHT12","USE_DS1624","USE_GPS","USE_HOTPLUG",
"USE_NRF24","USE_MIBLE","USE_HM10","USE_LE01MR",
"USE_AHT1x","USE_WEMOS_MOTOR_V1","",""
"USE_AHT1x","USE_WEMOS_MOTOR_V1","USE_DEVICE_GROUPS","USE_PWM_DIMMER"
],[
"","","","",
"","","","",
@ -236,7 +239,7 @@ else:
obj = json.load(fp)
def StartDecode():
print ("\n*** decode-status.py v20200222 by Theo Arends and Jacek Ziolkowski ***")
print ("\n*** decode-status.py v20200227 by Theo Arends and Jacek Ziolkowski ***")
# print("Decoding\n{}".format(obj))