mirror of
https://github.com/arendst/Tasmota.git
synced 2025-07-24 11:16:34 +00:00
Update changelogs
This commit is contained in:
parent
0ddcea9905
commit
978a21240c
@ -128,6 +128,7 @@ Note: `minimal` variant is not listed as it shouldn't be used outside of the [up
|
||||
| USE_MCP23XXX_DRV | - | - / - | - | - | - | - |
|
||||
| USE_PCA9632 | - | - / - | - | - | - | - |
|
||||
| USE_PCA9685 | - | - / - | - | - | - | - |
|
||||
| USE_PCA9685_V2 | - | - / - | - | - | - | - |
|
||||
| USE_MPR121 | - | - / - | - | - | - | - |
|
||||
| USE_CCS811 | - | - / - | - | x | - | - |
|
||||
| USE_CCS811_V2 | - | - / x | - | - | - | - |
|
||||
|
@ -6,6 +6,7 @@ All notable changes to this project will be documented in this file.
|
||||
## [13.0.0.3]
|
||||
### Added
|
||||
- Support for MAX17043 fuel-gauge systems Lipo batteries (#18788)
|
||||
- Support for multiple PCA9685 with extended functionality (#18805)
|
||||
|
||||
### Breaking Changed
|
||||
|
||||
@ -14,7 +15,7 @@ All notable changes to this project will be documented in this file.
|
||||
|
||||
### Fixed
|
||||
- Initial battery level percentage (#19160)
|
||||
- Berry SK6812_GRBW crash
|
||||
- Berry SK6812_GRBW crash (#19166)
|
||||
|
||||
### Removed
|
||||
|
||||
|
@ -9,6 +9,7 @@ The following table lists the supported I2C devices
|
||||
Index | Define | Driver | Device | Address(es) | Description
|
||||
------|---------------------|----------|----------|-------------|-----------------------------------------------
|
||||
1 | USE_PCA9685 | xdrv_15 | PCA9685 | 0x40 - 0x47 | 16-channel 12-bit pwm driver
|
||||
1 | USE_PCA9685_V2 | xdrv_15 | PCA9685 | 0x40 - 0x47 | 16-channel 12-bit pwm driver
|
||||
2 | USE_PCF8574 | xdrv_28 | PCF8574 | 0x20 - 0x26 | 8-bit I/O expander (address range overridable)
|
||||
2 | USE_PCF8574 | xdrv_28 | PCF8574A | 0x39 - 0x3F | 8-bit I/O expander (address range overridable)
|
||||
3 | USE_DISPLAY_LCD | xdsp_01 | | 0x27, 0x3F | LCD display
|
||||
|
@ -116,6 +116,7 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm
|
||||
- Command ``Delay -1`` to wait until next second [#18984](https://github.com/arendst/Tasmota/issues/18984)
|
||||
- Command ``Restart 9`` to save all changes and go into deepsleep waiting for a reset [#19024](https://github.com/arendst/Tasmota/issues/19024)
|
||||
- Support for MAX17043 fuel-gauge systems Lipo batteries [#18788](https://github.com/arendst/Tasmota/issues/18788)
|
||||
- Support for multiple PCA9685 with extended functionality [#18805](https://github.com/arendst/Tasmota/issues/18805)
|
||||
- Support for SGP41 TVOC/NOx Sensor [#18880](https://github.com/arendst/Tasmota/issues/18880)
|
||||
- Support for DeepSleep battery level percentage [#19134](https://github.com/arendst/Tasmota/issues/19134)
|
||||
- Berry `getgbl` performance counter to `debug.counters()` [#19070](https://github.com/arendst/Tasmota/issues/19070)
|
||||
|
@ -107,6 +107,7 @@
|
||||
//#define USE_MCP230xx // [I2cDriver22] Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
|
||||
//#define USE_MCP23XXX_DRV // [I2cDriver77] Enable MCP23xxx support as virtual switch/button/relay (+3k(I2C)/+5k(SPI) code)
|
||||
//#define USE_PCA9685 // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
|
||||
//#define USE_PCA9685_V2 // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+3k4 code)
|
||||
//#define USE_MPR121 // [I2cDriver23] Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
|
||||
#define USE_CCS811 // [I2cDriver24] Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
|
||||
//#define USE_CCS811_V2 // [I2cDriver24] Enable CCS811 sensor (I2C addresses 0x5A and 0x5B) (+2k8 code)
|
||||
|
@ -384,6 +384,7 @@
|
||||
//#define USE_MCP230xx // [I2cDriver22] Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
|
||||
#define USE_MCP23XXX_DRV // [I2cDriver77] Enable MCP23xxx support as virtual switch/button/relay (+3k(I2C)/+5k(SPI) code)
|
||||
//#define USE_PCA9685 // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
|
||||
//#define USE_PCA9685_V2 // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+3k4 code)
|
||||
//#define USE_MPR121 // [I2cDriver23] Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
|
||||
//#define USE_CCS811 // [I2cDriver24] Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
|
||||
//#define USE_CCS811_V2 // [I2cDriver24] Enable CCS811 sensor (I2C addresses 0x5A and 0x5B) (+2k8 code)
|
||||
@ -618,6 +619,7 @@
|
||||
//#define USE_MCP230xx // [I2cDriver22] Enable MCP23008/MCP23017 - Must define I2C Address in #define USE_MCP230xx_ADDR below - range 0x20 - 0x27 (+4k7 code)
|
||||
#define USE_MCP23XXX_DRV // [I2cDriver77] Enable MCP23xxx support as virtual switch/button/relay (+3k(I2C)/+5k(SPI) code)
|
||||
//#define USE_PCA9685 // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
|
||||
//#define USE_PCA9685_V2 // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+3k4 code)
|
||||
//#define USE_MPR121 // [I2cDriver23] Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
|
||||
//#define USE_CCS811 // [I2cDriver24] Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
|
||||
#define USE_CCS811_V2 // [I2cDriver24] Enable CCS811 sensor (I2C addresses 0x5A and 0x5B) (+2k8 code)
|
||||
|
@ -616,6 +616,7 @@
|
||||
// #define USE_MCP230xx_DISPLAYOUTPUT // Enable MCP23008/MCP23017 to display state of OUTPUT pins on Web UI (+0k2 code)
|
||||
// #define USE_MCP23XXX_DRV // [I2cDriver77] Enable MCP23xxx support as virtual switch/button/relay (+3k(I2C)/+5k(SPI) code)
|
||||
// #define USE_PCA9685 // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+1k4 code)
|
||||
// #define USE_PCA9685_V2 // [I2cDriver1] Enable PCA9685 I2C HW PWM Driver - Must define I2C Address in #define USE_PCA9685_ADDR below - range 0x40 - 0x47 (+3k4 code)
|
||||
// #define USE_PCA9685_ADDR 0x40 // Enable PCA9685 I2C Address to use (Must be within range 0x40 through 0x47 - set according to your wired setup)
|
||||
// #define USE_PCA9685_FREQ 50 // Define default PWM frequency in Hz to be used (must be within 24 to 1526) - If other value is used, it will rever to 50Hz
|
||||
// #define USE_PCA9632 // [I2cDriver75] Enable PCA9632 I2C HW PWM Driver (+1k8 code)
|
||||
|
@ -167,8 +167,8 @@ void ResponseAppendFeatures(void)
|
||||
#ifdef USE_MP3_PLAYER
|
||||
feature2 |= 0x00002000; // xdrv_14_mp3.ino
|
||||
#endif
|
||||
#if defined(USE_I2C) && defined(USE_PCA9685)
|
||||
feature2 |= 0x00004000; // xdrv_15_pca9685.ino
|
||||
#if defined(USE_I2C) && (defined(USE_PCA9685) || defined(USE_PCA9685_V2))
|
||||
feature2 |= 0x00004000; // xdrv_15_pca9685.ino or xdrv_15_pca9685_v2.ino
|
||||
#endif
|
||||
#if defined(USE_LIGHT) && defined(USE_TUYA_MCU)
|
||||
feature2 |= 0x00008000; // xdrv_16_tuyadimmer.ino
|
||||
@ -331,8 +331,8 @@ void ResponseAppendFeatures(void)
|
||||
#if defined(USE_I2C) && defined(USE_MPR121)
|
||||
feature4 |= 0x00000002; // xsns_30_mpr121.ino
|
||||
#endif
|
||||
#if defined(USE_I2C) && defined(USE_CCS811)
|
||||
feature4 |= 0x00000004; // xsns_31_ccs811.ino
|
||||
#if defined(USE_I2C) && (defined(USE_CCS811) || defined(USE_CCS811_V2))
|
||||
feature4 |= 0x00000004; // xsns_31_ccs811.ino or xsns_31_ccs811_v2.ino
|
||||
#endif
|
||||
#if defined(USE_I2C) && defined(USE_MPU6050)
|
||||
feature4 |= 0x00000008; // xsns_32_mpu6050.ino
|
||||
|
Loading…
x
Reference in New Issue
Block a user