jeans/Tasmota
jeans/Tasmota
1
0
Fork 0
mirror of https://github.com/arendst/Tasmota.git synced 2025-07-28 05:06:32 +00:00
Code Issues Packages Projects Releases Wiki Activity

POC2 Zigbee EFR32 xmodem upload

Browse Source 
POC2 Zigbee EFR32 xmodem upload (#8583)
- Swap reset states
- Speed up XMODEM upload by changing current loop sleep
- Add more debug messages
This commit is contained in:
Theo Arends 2020-07-27 11:01:20 +02:00
parent 3a8327bf3d
commit a6fe5f859b
1 changed files with 28 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
tasmota/xdrv_23_zigbee_9a_upload.ino
View File

@ -106,6 +106,7 @@ const uint8_t XMODEM_PACKET_SIZE = 128;
struct XMODEM { struct XMODEM {
uint32_t timeout = 0; uint32_t timeout = 0;
uint32_t delay = 0;
uint32_t filepos = 0; uint32_t filepos = 0;
int crcBuf = 0; int crcBuf = 0;
uint8_t packetNo = 1; uint8_t packetNo = 1;
@ -216,7 +217,10 @@ void ZigbeeUploadSetBootloader(uint8_t state) {
void ZigbeeUploadBootloaderDone(void) { void ZigbeeUploadBootloaderDone(void) {
ZbUpload.ota_step = ZBU_COMPLETE; // Never return to zero without a restart to get a sane Zigbee environment ZbUpload.ota_step = ZBU_COMPLETE; // Never return to zero without a restart to get a sane Zigbee environment
ZigbeeUploadSetBootloader(0); // Disable bootloader and reset MCU - should happen or restart ZigbeeUploadSetBootloader(1); // Disable bootloader and reset MCU - should happen or restart
if (1 == ssleep) {
ssleep = Settings.sleep; // Restore loop sleep
}
restart_flag = 2; // Restart to disable bootloader and use new firmware restart_flag = 2; // Restart to disable bootloader and use new firmware
} }
@ -246,20 +250,27 @@ bool ZigbeeUploadXmodem(void) {
switch (ZbUpload.ota_step) { switch (ZbUpload.ota_step) {
case ZBU_INIT: { // Init ESF32 bootloader case ZBU_INIT: { // Init ESF32 bootloader
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("XMD: Init bootloader"));
ZigbeeUploadSetBootloader(0); // Reboot MCU EFR32 which returns below text
XModem.timeout = millis() + (30 * 1000); // Allow 30 seconds to receive EBL prompt
XModem.delay = millis() + 500;
ZbUpload.ota_step = ZBU_PROMPT; ZbUpload.ota_step = ZBU_PROMPT;
uint32_t sector_counter = ZigbeeUploadFlashStart() * SPI_FLASH_SEC_SIZE;
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("ZIG: Upload 0x%08X, size 0x%08X"), sector_counter, ZbUpload.ota_size);
ZigbeeUploadSetBootloader(1); // Reboot MCU EFR32 which returns below text
break; break;
} }
case ZBU_PROMPT: { // Wait for prompt and select option upload ebl case ZBU_PROMPT: { // Wait for prompt and select option upload ebl
if (!ZigbeeSerial->available()) { if (millis() > XModem.timeout) {
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("XMD: Bootloader timeout"));
ZigbeeUploadBootloaderDone();
return true;
}
else if (!ZigbeeSerial->available()) {
// The target device’s bootloader sends output over its serial port after it receives a carriage return // The target device’s bootloader sends output over its serial port after it receives a carriage return
// from the source device // from the source device
if (millis() > XModem.delay) {
ZigbeeSerial->write('a');
ZigbeeSerial->write(XM_CR); ZigbeeSerial->write(XM_CR);
delay(1); XModem.delay = millis() + 500;
}
} else { } else {
// After the bootloader receives a carriage return from the target device, it displays a menu // After the bootloader receives a carriage return from the target device, it displays a menu
// Gecko Bootloader v1.A.3 // Gecko Bootloader v1.A.3
@ -268,8 +279,12 @@ bool ZigbeeUploadXmodem(void) {
// 3. ebl info // 3. ebl info
// BL > // BL >
if (ZigbeeUploadBootloaderPrompt()) { if (ZigbeeUploadBootloaderPrompt()) {
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("XMD: Init sync"));
ZigbeeSerial->flush(); ZigbeeSerial->flush();
ZigbeeSerial->write('1'); // upload ebl ZigbeeSerial->write('1'); // upload ebl
if (ssleep > 0) {
ssleep = 1; // Speed up loop used for xmodem upload
}
XModem.timeout = millis() + (XMODEM_SYNC_TIMEOUT * 1000); XModem.timeout = millis() + (XMODEM_SYNC_TIMEOUT * 1000);
ZbUpload.ota_step = ZBU_SYNC; ZbUpload.ota_step = ZBU_SYNC;
} }
@ -278,7 +293,7 @@ bool ZigbeeUploadXmodem(void) {
} }
case ZBU_SYNC: { // Handle file upload using XModem - sync case ZBU_SYNC: { // Handle file upload using XModem - sync
if (millis() > XModem.timeout) { if (millis() > XModem.timeout) {
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("XMD: Initial sync failed")); AddLog_P2(LOG_LEVEL_DEBUG, PSTR("XMD: Sync timeout"));
ZigbeeUploadBootloaderDone(); ZigbeeUploadBootloaderDone();
return true; return true;
} }
@ -292,7 +307,7 @@ bool ZigbeeUploadXmodem(void) {
XModem.packetNo = 1; XModem.packetNo = 1;
ZbUpload.byte_counter = 0; ZbUpload.byte_counter = 0;
ZbUpload.ota_step = ZBU_UPLOAD; ZbUpload.ota_step = ZBU_UPLOAD;
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("XMD: Sync received")); AddLog_P2(LOG_LEVEL_DEBUG, PSTR("XMD: Init packet send"));
} }
} }
break; break;
@ -311,6 +326,7 @@ bool ZigbeeUploadXmodem(void) {
ZigbeeUploadBootloaderDone(); ZigbeeUploadBootloaderDone();
return true; return true;
} }
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("XMD: Complete"));
ZbUpload.ota_step = ZBU_DONE; ZbUpload.ota_step = ZBU_DONE;
} }
break; break;