diff --git a/tasmota/support.ino b/tasmota/support.ino
index c89c6f237..6f8dc8288 100644
--- a/tasmota/support.ino
+++ b/tasmota/support.ino
@@ -2403,13 +2403,24 @@ bool I2cSetDevice(uint32_t addr, uint32_t bus) {
  *
 \*********************************************************************************************/
 
-void SetSeriallog(uint32_t loglevel)
-{
+void SetTasConlog(uint32_t loglevel) {
   Settings->seriallog_level = loglevel;
   TasmotaGlobal.seriallog_level = loglevel;
   TasmotaGlobal.seriallog_timer = 0;
 }
 
+void SetSeriallog(uint32_t loglevel) {
+#ifdef ESP32
+  if (tasconsole_serial) {
+#endif  // ESP32
+
+  SetTasConlog(loglevel);
+
+#ifdef ESP32
+  }
+#endif  // ESP32
+}
+
 void SetSyslog(uint32_t loglevel)
 {
   Settings->syslog_level = loglevel;
@@ -2576,7 +2587,7 @@ void AddLogData(uint32_t loglevel, const char* log_data, const char* log_data_pa
 
   if ((loglevel <= TasmotaGlobal.seriallog_level) &&
       (TasmotaGlobal.masterlog_level <= TasmotaGlobal.seriallog_level)) {
-    Serial.printf("%s%s%s%s\r\n", mxtime, log_data, log_data_payload, log_data_retained);
+    TasConsole.printf("%s%s%s%s\r\n", mxtime, log_data, log_data_payload, log_data_retained);
   }
 
   if (!TasmotaGlobal.log_buffer) { return; }  // Leave now if there is no buffer available
diff --git a/tasmota/support_command.ino b/tasmota/support_command.ino
index 0f543ec34..7d83756d6 100644
--- a/tasmota/support_command.ino
+++ b/tasmota/support_command.ino
@@ -857,8 +857,18 @@ void CmndOtaUrl(void)
 void CmndSeriallog(void)
 {
   if ((XdrvMailbox.payload >= LOG_LEVEL_NONE) && (XdrvMailbox.payload <= LOG_LEVEL_DEBUG_MORE)) {
+
+#ifdef ESP32
+    if (tasconsole_serial) {
+#endif  // ESP32
+
     Settings->flag.mqtt_serial = 0;       // CMND_SERIALSEND and CMND_SERIALLOG
-    SetSeriallog(XdrvMailbox.payload);
+
+#ifdef ESP32
+    }
+#endif  // ESP32
+
+    SetTasConlog(XdrvMailbox.payload);
   }
   Response_P(S_JSON_COMMAND_NVALUE_ACTIVE_NVALUE, XdrvMailbox.command, Settings->seriallog_level, TasmotaGlobal.seriallog_level);
 }
diff --git a/tasmota/support_tasmota.ino b/tasmota/support_tasmota.ino
index d438bae8b..343481e1d 100644
--- a/tasmota/support_tasmota.ino
+++ b/tasmota/support_tasmota.ino
@@ -1520,8 +1520,8 @@ void ArduinoOTAInit(void)
   {
     if ((LOG_LEVEL_DEBUG <= TasmotaGlobal.seriallog_level)) {
       arduino_ota_progress_dot_count++;
-      Serial.printf(".");
-      if (!(arduino_ota_progress_dot_count % 80)) { Serial.println(); }
+      TasConsole.printf(".");
+      if (!(arduino_ota_progress_dot_count % 80)) { TasConsole.println(); }
     }
   });
 
@@ -1533,7 +1533,7 @@ void ArduinoOTAInit(void)
     */
     char error_str[100];
 
-    if ((LOG_LEVEL_DEBUG <= TasmotaGlobal.seriallog_level) && arduino_ota_progress_dot_count) { Serial.println(); }
+    if ((LOG_LEVEL_DEBUG <= TasmotaGlobal.seriallog_level) && arduino_ota_progress_dot_count) { TasConsole.println(); }
     switch (error) {
       case OTA_BEGIN_ERROR: strncpy_P(error_str, PSTR(D_UPLOAD_ERR_2), sizeof(error_str)); break;
       case OTA_RECEIVE_ERROR: strncpy_P(error_str, PSTR(D_UPLOAD_ERR_5), sizeof(error_str)); break;
@@ -1547,7 +1547,7 @@ void ArduinoOTAInit(void)
 
   ArduinoOTA.onEnd([]()
   {
-    if ((LOG_LEVEL_DEBUG <= TasmotaGlobal.seriallog_level)) { Serial.println(); }
+    if ((LOG_LEVEL_DEBUG <= TasmotaGlobal.seriallog_level)) { TasConsole.println(); }
     AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_UPLOAD "Arduino OTA " D_SUCCESSFUL ". " D_RESTARTING));
     EspRestart();
 	});
@@ -1657,6 +1657,10 @@ void SerialInput(void)
 #endif  // USE_SONOFF_SC
 /*-------------------------------------------------------------------------------------------*/
 
+#ifdef ESP32
+    if (tasconsole_serial) {
+#endif  // ESP32
+
     if (!Settings->flag.mqtt_serial && (TasmotaGlobal.serial_in_byte == '\n')) {                // CMND_SERIALSEND and CMND_SERIALLOG
       TasmotaGlobal.serial_in_buffer[TasmotaGlobal.serial_in_byte_counter] = 0;                // Serial data completed
       TasmotaGlobal.seriallog_level = (Settings->seriallog_level < LOG_LEVEL_INFO) ? (uint8_t)LOG_LEVEL_INFO : Settings->seriallog_level;
@@ -1671,7 +1675,12 @@ void SerialInput(void)
       Serial.flush();
       return;
     }
-  }
+
+#ifdef ESP32
+    }
+#endif  // ESP32
+
+  }  // endWhile
 
   if (Settings->flag.mqtt_serial && TasmotaGlobal.serial_in_byte_counter && (millis() > (serial_polling_window + SERIAL_POLLING))) {  // CMND_SERIALSEND and CMND_SERIALLOG
     TasmotaGlobal.serial_in_buffer[TasmotaGlobal.serial_in_byte_counter] = 0;                  // Serial data completed
@@ -1701,6 +1710,43 @@ void SerialInput(void)
   }
 }
 
+/********************************************************************************************/
+
+#ifdef ESP32
+
+String console_buffer = "";
+
+void TasConsoleInput(void) {
+  static bool console_buffer_overrun = false;
+
+  while (TasConsole.available()) {
+    delay(0);
+    char console_in_byte = TasConsole.read();
+
+    if (isprint(console_in_byte)) {                       // Any char between 32 and 127
+      if (console_buffer.length() < INPUT_BUFFER_SIZE) {  // Add char to string if it still fits
+        console_buffer += console_in_byte;
+      } else {
+        console_buffer_overrun = true;                    // Signal overrun but continue reading input to flush until '\n' (EOL)
+      }
+    }
+    if (console_in_byte == '\n') {
+      TasmotaGlobal.seriallog_level = (Settings->seriallog_level < LOG_LEVEL_INFO) ? (uint8_t)LOG_LEVEL_INFO : Settings->seriallog_level;
+      if (console_buffer_overrun) {
+        AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_COMMAND "Console buffer overrun"));
+      } else {
+        AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_COMMAND "%s"), console_buffer.c_str());
+        ExecuteCommand(console_buffer.c_str(), SRC_SERIAL);
+      }
+      console_buffer = "";
+      console_buffer_overrun = false;
+      TasConsole.flush();
+      return;
+    }
+  }
+}
+
+#endif  // ESP32
 
 /********************************************************************************************/
 
diff --git a/tasmota/tasmota.ino b/tasmota/tasmota.ino
index bad041105..44d39780f 100644
--- a/tasmota/tasmota.ino
+++ b/tasmota/tasmota.ino
@@ -97,6 +97,47 @@ const uint32_t VERSION_MARKER[] PROGMEM = { 0x5AA55AA5, 0xFFFFFFFF, 0xA55AA55A }
 
 WiFiUDP PortUdp;                            // UDP Syslog and Alexa
 
+#ifdef ESP32
+/*
+#if CONFIG_IDF_TARGET_ESP32C3 ||            // support USB via HWCDC using JTAG interface
+    CONFIG_IDF_TARGET_ESP32S2 ||            // support USB via USBCDC
+    CONFIG_IDF_TARGET_ESP32S3               // support USB via HWCDC using JTAG interface or USBCDC
+*/
+#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
+
+//#if CONFIG_TINYUSB_CDC_ENABLED              // This define is not recognized here so use USE_USB_SERIAL_CONSOLE
+#ifdef USE_USB_SERIAL_CONSOLE
+//#warning **** TasConsole use USB ****
+
+#if ARDUINO_USB_MODE
+//#warning **** TasConsole ARDUINO_USB_MODE ****
+HWCDC TasConsole;                           // ESP32C3/S3 embedded USB using JTAG interface
+bool tasconsole_serial = false;
+//#warning **** TasConsole uses HWCDC ****
+#else   // No ARDUINO_USB_MODE
+#include "USB.h"
+#include "USBCDC.h"
+USBCDC TasConsole;                          // ESP32Sx embedded USB interface
+bool tasconsole_serial = false;
+//#warning **** TasConsole uses USBCDC ****
+#endif  // ARDUINO_USB_MODE
+
+#else   // No USE_USB_SERIAL_CONSOLE
+HardwareSerial TasConsole = Serial;         // Fallback serial interface for ESP32C3, S2 and S3 if no USB_SERIAL defined
+bool tasconsole_serial = true;
+//#warning **** TasConsole uses Serial ****
+#endif  // USE_USB_SERIAL_CONSOLE
+
+#else   // No ESP32C3, S2 or S3
+HardwareSerial TasConsole = Serial;         // Fallback serial interface for non ESP32C3, S2 and S3
+bool tasconsole_serial = true;
+//#warning **** TasConsole uses Serial ****
+#endif  // ESP32C3, S2 or S3
+
+#else   // No ESP32
+HardwareSerial TasConsole = Serial;         // Only serial interface
+#endif  // ESP32
+
 struct TasmotaGlobal_t {
   uint32_t global_update;                   // Timestamp of last global temperature and humidity update
   uint32_t baudrate;                        // Current Serial baudrate
@@ -281,6 +322,7 @@ void setup(void) {
   TasmotaGlobal.active_device = 1;
   TasmotaGlobal.global_state.data = 0xF;  // Init global state (wifi_down, mqtt_down) to solve possible network issues
   TasmotaGlobal.enable_logging = 1;
+  TasmotaGlobal.seriallog_level = LOG_LEVEL_INFO;  // Allow specific serial messages until config loaded
 
   RtcRebootLoad();
   if (!RtcRebootValid()) {
@@ -301,11 +343,8 @@ void setup(void) {
     uint32_t baudrate = (RtcSettings.baudrate / 300) * 300;  // Make it a valid baudrate
     if (baudrate) { TasmotaGlobal.baudrate = baudrate; }
   }
-  Serial.begin(TasmotaGlobal.baudrate);
-  Serial.println();
-//  Serial.setRxBufferSize(INPUT_BUFFER_SIZE);  // Default is 256 chars
-  TasmotaGlobal.seriallog_level = LOG_LEVEL_INFO;  // Allow specific serial messages until config loaded
 
+  // Init settings and logging preparing for AddLog use
 #ifdef PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48_SECHEAP_SHARED
   ESP.setIramHeap();
   Settings = (TSettings*)malloc(sizeof(TSettings));             // Allocate in "new" 16k heap space
@@ -322,6 +361,31 @@ void setup(void) {
     Settings = (TSettings*)malloc(sizeof(TSettings));
   }
 
+  // Init command console (either serial or USB) preparing for AddLog use
+  Serial.begin(TasmotaGlobal.baudrate);
+  Serial.println();
+//  Serial.setRxBufferSize(INPUT_BUFFER_SIZE);  // Default is 256 chars
+#ifdef ESP32
+#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3
+#ifdef USE_USB_SERIAL_CONSOLE
+  TasConsole.begin(115200);    // Will always be 115200 bps
+#if !ARDUINO_USB_MODE
+  USB.begin();
+#endif  // No ARDUINO_USB_MODE
+  TasConsole.println();
+  AddLog(LOG_LEVEL_INFO, PSTR("CMD: Using embedded USB"));
+#else   // No USE_USB_SERIAL_CONSOLE
+  TasConsole = Serial;
+#endif  // USE_USB_SERIAL_CONSOLE
+#else   // No ESP32C3, S2 or S3
+  TasConsole = Serial;
+#endif  // ESP32C3, S2 or S3
+#else   // No ESP32
+  TasConsole = Serial;
+#endif  // ESP32
+
+  // Ready for AddLog use
+
 //  AddLog(LOG_LEVEL_INFO, PSTR("ADR: Settings %p, Log %p"), Settings, TasmotaGlobal.log_buffer);
 #ifdef ESP32
   AddLog(LOG_LEVEL_INFO, PSTR("HDW: %s %s"), GetDeviceHardware().c_str(),
@@ -583,6 +647,9 @@ void Scheduler(void) {
   }
 
   if (!TasmotaGlobal.serial_local) { SerialInput(); }
+#ifdef ESP32
+  if (!tasconsole_serial) { TasConsoleInput(); }
+#endif  // ESP32
 
 #ifdef USE_ARDUINO_OTA
   ArduinoOtaLoop();
diff --git a/tasmota/xdrv_52_3_berry_tasmota.ino b/tasmota/xdrv_52_3_berry_tasmota.ino
index 6a1453d15..f7ef12e1c 100644
--- a/tasmota/xdrv_52_3_berry_tasmota.ino
+++ b/tasmota/xdrv_52_3_berry_tasmota.ino
@@ -636,7 +636,7 @@ extern "C" {
     uint32_t len = ext_vsnprintf_P(log_data, LOGSZ-3, berry_buf, arg);
     va_end(arg);
     if (len+3 > LOGSZ) { strcat(log_data, "..."); }  // Actual data is more
-    Serial.printf(log_data);
+    TasConsole.printf(log_data);
   }
 
   void berry_log_C(const char * berry_buf, ...) {