jeans/Tasmota
jeans/Tasmota
1
0
Fork 0
mirror of https://github.com/arendst/Tasmota.git synced 2025-07-28 21:26:33 +00:00
Code Issues Packages Projects Releases Wiki Activity

Fixes and Tuning

Browse Source 
Fixes and Tuning
This commit is contained in:
Theo Arends 2019-02-05 12:21:31 +01:00
parent e9ad78c616
commit adecf6a9ce
2 changed files with 30 additions and 27 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
sonoff/xnrg_03_pzem004t.ino
View File

@ -32,7 +32,7 @@
#include <TasmotaSerial.h>
TasmotaSerial *PzemSerial;
TasmotaSerial *PzemSerial = NULL;
#define PZEM_VOLTAGE (uint8_t)0xB0
#define RESP_VOLTAGE (uint8_t)0xA0
@ -239,7 +239,7 @@ int Xnrg03(uint8_t function)
PzemSnsInit();
break;
case FUNC_EVERY_200_MSECOND:
PzemEvery200ms();
if (PzemSerial) { PzemEvery200ms(); }
break;
}
}

53
sonoff/xnrg_04_mcp39f501.ino
View File

@ -92,8 +92,8 @@ typedef struct mcp_cal_registers_type {
uint16_t accumulation_interval;
} mcp_cal_registers_type;
char *mcp_buffer = NULL; // Serial receive buffer
char *mcp_buffer = NULL;
unsigned long mcp_window = 0;
unsigned long mcp_kWhcounter = 0;
uint32_t mcp_system_configuration = 0x03000000;
uint32_t mcp_active_power;
@ -108,6 +108,7 @@ uint8_t mcp_calibration_active = 0;
uint8_t mcp_init = 0;
uint8_t mcp_timeout = 0;
uint8_t mcp_calibrate = 0;
uint8_t mcp_byte_counter = 0;
/*********************************************************************************************\
* Olimex tools
@ -474,21 +475,20 @@ void McpParseData(void)
void McpSerialInput(void)
{
if (McpSerial->available()) {
int mcp_byte_counter = 0;
unsigned long start = millis();
while ((millis() - start < (24000 / MCP_BAUDRATE) +1) && (mcp_byte_counter < MCP_BUFFER_SIZE)) {
yield();
if (McpSerial->available()) {
mcp_buffer[mcp_byte_counter++] = McpSerial->read();
start = millis();
}
}
while ((McpSerial->available()) && (mcp_byte_counter < MCP_BUFFER_SIZE)) {
yield();
mcp_buffer[mcp_byte_counter++] = McpSerial->read();
mcp_window = millis();
}
// Ignore until non received after 2 chars (= 12 bits/char) time
if ((mcp_byte_counter) && (millis() - mcp_window > (24000 / MCP_BAUDRATE) +1)) {
AddLogBuffer(LOG_LEVEL_DEBUG_MORE, (uint8_t*)mcp_buffer, mcp_byte_counter);
if (1 == mcp_byte_counter) {
if (MCP_BUFFER_SIZE == mcp_byte_counter) {
// AddLog_P(LOG_LEVEL_DEBUG, PSTR("MCP: Overflow"));
}
else if (1 == mcp_byte_counter) {
if (MCP_ERROR_CRC == mcp_buffer[0]) {
// AddLog_P(LOG_LEVEL_DEBUG, PSTR("MCP: Send " D_CHECKSUM_FAILURE));
mcp_timeout = 0;
@ -517,6 +517,7 @@ void McpSerialInput(void)
mcp_timeout = 0;
}
mcp_byte_counter = 0;
McpSerial->flush();
}
}
@ -558,7 +559,12 @@ void McpSnsInit(void)
// Software serial init needs to be done here as earlier (serial) interrupts may lead to Exceptions
McpSerial = new TasmotaSerial(pin[GPIO_MCP39F5_RX], pin[GPIO_MCP39F5_TX], 1);
if (McpSerial->begin(MCP_BAUDRATE)) {
if (McpSerial->hardwareSerial()) { ClaimSerial(); }
if (McpSerial->hardwareSerial()) {
ClaimSerial();
mcp_buffer = serial_in_buffer; // Use idle serial buffer to save RAM
} else {
mcp_buffer = (char*)(malloc(MCP_BUFFER_SIZE));
}
if (pin[GPIO_MCP39F5_RST] < 99) {
digitalWrite(pin[GPIO_MCP39F5_RST], 1); // MCP enable
}
@ -571,17 +577,14 @@ void McpDrvInit(void)
{
if (!energy_flg) {
if ((pin[GPIO_MCP39F5_RX] < 99) && (pin[GPIO_MCP39F5_TX] < 99)) {
mcp_buffer = (char*)(malloc(MCP_BUFFER_SIZE));
if (mcp_buffer != NULL) {
if (pin[GPIO_MCP39F5_RST] < 99) {
pinMode(pin[GPIO_MCP39F5_RST], OUTPUT);
digitalWrite(pin[GPIO_MCP39F5_RST], 0); // MCP disable - Reset Delta Sigma ADC's
}
mcp_calibrate = 0;
mcp_timeout = 2; // Initial wait
mcp_init = 2; // Initial setup steps
energy_flg = XNRG_04;
if (pin[GPIO_MCP39F5_RST] < 99) {
pinMode(pin[GPIO_MCP39F5_RST], OUTPUT);
digitalWrite(pin[GPIO_MCP39F5_RST], 0); // MCP disable - Reset Delta Sigma ADC's
}
mcp_calibrate = 0;
mcp_timeout = 2; // Initial wait
mcp_init = 2; // Initial setup steps
energy_flg = XNRG_04;
}
}
}