diff --git a/RELEASENOTES.md b/RELEASENOTES.md index 92eed5ef6..fa20871e5 100644 --- a/RELEASENOTES.md +++ b/RELEASENOTES.md @@ -232,52 +232,51 @@ Version 6.6.0 20190707 * Refactor TLS based on BearSSL, warning breaking change for fingerprints validation * Refactor management of lights, using classes and integers instead of floats * Refactor UDP initial message handling from string to char using static memory and add debug info (#5505) - * Refactor IRsend and receive for 64-bit support (#5523) + * Refactor ``IRsend`` and receive for 64-bit support (#5523) * Refactor MQTT which might solve issue (#5755) - * Refactor IRSend by using heap when more than 199 values need to be send. May need increase of define MQTT_MAX_PACKET_SIZE too (#5950) + * Refactor ``IRSend`` by using heap when more than 199 values need to be send. May need increase of define MQTT_MAX_PACKET_SIZE too (#5950) * Refactor double to float in rules, and replaced trigonometric functions from stdlib with smaller versions (#6005) * Change pubsubclient MQTT_KEEPALIVE from 10 to 30 seconds for AWS IoT support * Change gamma correction as default behavior, ie "Ledtable 1" * Change PWM resolution from 8 to 10 bits for low brightness lights - * Change IRSend Panasonic protocol to 64-bit (#5523) + * Change ``IRSend`` Panasonic protocol to 64-bit (#5523) * Change ADC0 to enabled by default in my_user_config.h (#5671) * Change define USE_EMULATION by USE_EMULATION_HUE and USE_EMULATION_WEMO (#5826) - * Change default PowerDelta from 80% to 0% on new installations (#5858, #5028, #4813, #4130, #4145, #3795, #3778, #3660, #3648) + * Change default ``PowerDelta`` from 80% to 0% on new installations (#5858, #5028, #4813, #4130, #4145, #3795, #3778, #3660, #3648) * Fix display Bug in KNX webmenu for Physical Address - * Fix the Unescape() function and the SendSerial3 behaviour + * Fix the Unescape() function and the ``SendSerial3`` behaviour * Fix webserver multiple Javascript window.onload functionality * Fix TasmotaSerial at 9600 bps solving DFPlayer comms (#5528) * Fix Configure Timer Web GUI (#5568) * Fix Shelly 2.5 I2C address priority issue when VEML6070 code is present by disabling VEML6070 for Shelly 2.5 (#5592) - * Fix use of SerialDelimiter value 128 (#5634) + * Fix use of ``SerialDelimiter`` value 128 (#5634) * Fix Sonoff Pow R2 / S31 invalid energy increments (#5789) * Fix core 2.5.x ISR not in IRAM exception (#5837) * Fix Philips Hue emulation Alexa issue by using part of MAC address for LightId (#5849) * Fix missing white channel for WS2812 (#5869) * Fix PZem startup issue (#5875) * Fix exception 9 when syslog is enabled and NTP is just synced (#5917) - * Fix include of my_user_config.h in sonoff_aws_iot.cpp (#5930) * Fix Toggle functionality to button double press when one button and two devices are detected (#5935) - * Fix channel command for dual dimmers (#5940) + * Fix command ``Channel`` for dual dimmers (#5940) * Fix not restoring white value on power off/power on (#5993) - * Add command AdcParam to control ADC0 Temperature and Light formula parameters - * Add command LedMask to assign which relay has access to power LED (#5602, #5612) - * Add extended LED power control using command LedPowerX where X is 1 to 4. Enabled when "LedLink(i)" is configured too (#5709) - * Add command Sensor20 1..255 to change Nova Fitness SDS01 working period in minutes (#5452) - * Add command SetOption38 6..255 to set IRReceive protocol detection sensitivity mimizing UNKNOWN protocols (#5853) - * Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W. Default setting is 128 (#5756) - * Add command SetOption40 0..250 to disable button functionality if activated for over 0.1 second. Needs SetOption1 1 and SetOption13 0 (#5449) - * Add command SetOption63 0/1 to disable relay state feedback scan at restart (#5594, #5663) - * Add command SetOption64 0/1 to switch between "-" or "_" as sensor index separator impacting DS18X20, DHT, BMP and SHT3X sensor names (#5689) - * Add command SetOption65 0/1 and more Tuya Serial based device support (#5815) - * Add command WebColor to change GUI colors on the fly + * Add command ``AdcParam`` to control ADC0 Temperature and Light formula parameters + * Add command ``LedMask`` to assign which relay has access to power LED (#5602, #5612) + * Add extended LED power control using command ``LedPowerX`` where X is 1 to 4. Enabled when "LedLink(i)" is configured too (#5709) + * Add command ``Sensor20 1..255`` to change Nova Fitness SDS01 working period in minutes (#5452) + * Add command ``SetOption38 6..255`` to set IRReceive protocol detection sensitivity mimizing UNKNOWN protocols (#5853) + * Add command ``SetOption39 1..255`` to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W. Default setting is 128 (#5756) + * Add command ``SetOption40 0..250`` to disable button functionality if activated for over 0.1 second. Needs SetOption1 1 and SetOption13 0 (#5449) + * Add command ``SetOption63 0/1`` to disable relay state feedback scan at restart (#5594, #5663) + * Add command ``SetOption64 0/1`` to switch between "-" or "_" as sensor index separator impacting DS18X20, DHT, BMP and SHT3X sensor names (#5689) + * Add command ``SetOption65 0/1`` and more Tuya Serial based device support (#5815) + * Add command ``WebColor`` to change GUI colors on the fly * Add support for AWS IoT with TLS 1.2 on core 2.4.2 and up. Full doc here: https://github.com/arendst/Sonoff-Tasmota/wiki/AWS-IoT * Add support for Badger HR-E Water Meter (#5539) * Add support for Shelly 2.5 Energy and overtemp Monitoring (#5592) * Add support for color and colortone for Philips Hue emulation via Alexa (#5600 #4809) * Add support for Scripts as replacement for Rules. Default disabled but can be enabled in my_user_config.h (#5689) * Add support for up to four LEDs related to four power outputs. Enabled when "LedLink(i)" is configured too (#5709) - * Add support for Shelly 1PM Template {"NAME":"Shelly 1PM","GPIO":[56,0,0,0,82,134,0,0,0,0,0,21,0],"FLAG":2,"BASE":18} (#5716) + * Add support for Shelly 1PM Template ``{"NAME":"Shelly 1PM","GPIO":[56,0,0,0,82,134,0,0,0,0,0,21,0],"FLAG":2,"BASE":18}`` (#5716) * Add support for SPS30 Particle sensor thanks to Gerhard Mutz (#5830) * Add support for VL53L0x time of flight sensor. Might interfere with TSL2561 using same I2C address (#5845) * Add support for Sonoff L1 thanks to reef-actor (#6002) @@ -294,7 +293,7 @@ Version 6.6.0 20190707 * Add validation check when loading settings from flash * Add HX711 weight restore after controlled restart or after power restore just before executing command Sensor34 7 (#5367, #5786) * Add GUI hexadecimal color options in my_user_config.h (#5586) - * Add alternative IRSend command syntax IRSend raw,,
,
,,,, (#5610) + * Add alternative ``IRSend`` command syntax ``IRSend raw,,
,
,,,,`` (#5610) * Add user configurable ADC0 to Module and Template configuration compatible with current FLAG options (#5671) * Add AriLux RF control GPIO option "ALux IrSel" (159) replacing "Led4i" (59) for full LED control (#5709) * Add LED GPIO option "LedLink" (157) and "LedLinki" (158) to select dedicated link status LED (#5709) diff --git a/sonoff/_changelog.ino b/sonoff/_changelog.ino index 752dc3a0c..1b257345f 100644 --- a/sonoff/_changelog.ino +++ b/sonoff/_changelog.ino @@ -31,7 +31,6 @@ * Fix missing white channel for WS2812 (#5869) * Fix PZem startup issue (#5875) * Fix exception 9 when syslog is enabled and NTP is just synced (#5917) - * Fix include of my_user_config.h in sonoff_aws_iot.cpp (#5930) * Fix Toggle functionality to button double press when one button and two devices are detected (#5935) * Fix channel command for dual dimmers (#5940) * Fix not restoring white value on power off/power on (#5993)