Merge pull request #13343 from curzon01/dev-neopool

Add NeoPool cell runtime, rw error repetition, register desc

tasmota/language/bg_BG.h

@@ -1063,6 +1063,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/cs_CZ.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/de_DE.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Salzwasserpumpe"
 #define D_NEOPOOL_TIME                    "Zeit"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Laufzeit Zelle"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrAus"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/el_GR.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/en_GB.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/fr_FR.h

@@ -1063,6 +1063,7 @@
 #define D_NEOPOOL_RELAY_CD                "Pompe Brome"
 #define D_NEOPOOL_TIME                    "Durée"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "OK"

tasmota/language/fy_NL.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/he_HE.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/hu_HU.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Idő"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/ko_KO.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/nl_NL.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/pl_PL.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/pt_PT.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/ro_RO.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/ru_RU.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/sk_SK.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/sv_SE.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/tr_TR.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/uk_UA.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/vi_VN.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/zh_CN.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/language/zh_TW.h

@@ -1064,6 +1064,7 @@
 #define D_NEOPOOL_RELAY_CD                "Brine pump"
 #define D_NEOPOOL_TIME                    "Time"
 #define D_NEOPOOL_FILT_MODE               "Filtration"
+#define D_NEOPOOL_CELL_RUNTIME            "Cell runtime"
 #define D_NEOPOOL_POLARIZATION            "Pol"               // Sensor status
 #define D_NEOPOOL_PR_OFF                  "PrOff"
 #define D_NEOPOOL_SETPOINT_OK             "Ok"

tasmota/xsns_83_neopool.ino

@@ -105,6 +105,9 @@ enum NeoPoolRegister {
   MBF_HIDRO_VOLTAGE,                      // 0x0111         Reports on the stress applied to the hydrolysis cell. This register, together with that of MBF_HIDRO_CURRENT allows extrapolating the salinity of the water.
 
   // GLOBAL page (0x02xx)
+  MBF_CELL_RUNTIME_LOW = 0x0206,          // 0x0206*        undocumented - cell runtime (32 bit) - low word
+  MBF_CELL_RUNTIME_HIGH = 0x0207,         // 0x0207*        undocumented - cell runtime (32 bit) - high word
+  MBF_BOOST_CTRL = 0x020C,                // 0x020C         undocumented - 0x0000 = Boost Off, 0x05A0 = Boost with redox ctrl, 0x85A0 = Boost without redox ctrl
   MBF_SET_MANUAL_CTRL = 0x0289,           // 0x0289         undocumented - write a 1 before manual control MBF_RELAY_STATE, after done write 0 and do MBF_EXEC
   MBF_ESCAPE = 0x0297,                    // 0x0297         undocumented - A write operation to this register is the same as using the ESC button on main screen - clears error
   MBF_SAVE_TO_EEPROM = 0x02F0,            // 0x02F0         A write operation to this register starts a EEPROM storage operation immediately. During the EEPROM storage procedure, the system may be unresponsive to MODBUS requests. The operation will last always less than 1 second.
@@ -549,6 +552,9 @@ bool neopool_first_read = true;
 #endif  // NEOPOOL_OPTIMIZE_READINGS
 bool neopool_error = true;
 
+#define NEOPOOL_MAX_REPEAT_ON_ERROR 10
+uint8_t neopool_repeat_on_error = 2;
+
 uint16_t neopool_light_relay;
 uint8_t neopool_light_prg_delay;
 uint8_t neopoll_cmd_delay = 0;
@@ -577,8 +583,9 @@ struct {
     NeoPoolRegList list[];
   };
 } NeoPoolReg[] = {
-    // 4 entries so using 250ms poll interval we are through in a second for all register
+    // 6 entries so using 250ms poll interval we are through in 1,5 for all register
     {NEOPOOL_REG_TYPE_BLOCK, {MBF_ION_CURRENT,       MBF_NOTIFICATION      - MBF_ION_CURRENT + 1, nullptr}},
+    {NEOPOOL_REG_TYPE_BLOCK, {MBF_CELL_RUNTIME_LOW,  MBF_CELL_RUNTIME_HIGH - MBF_CELL_RUNTIME_LOW + 1, nullptr}},
     {NEOPOOL_REG_TYPE_BLOCK, {MBF_PAR_VERSION,       MBF_PAR_MODEL         - MBF_PAR_VERSION + 1, nullptr}},
     {NEOPOOL_REG_TYPE_BLOCK, {MBF_PAR_TIME_LOW,      MBF_PAR_FILT_GPIO     - MBF_PAR_TIME_LOW + 1, nullptr}},
     {NEOPOOL_REG_TYPE_BLOCK, {MBF_PAR_ION,           MBF_PAR_FILTRATION_TYPE - MBF_PAR_ION + 1, nullptr}},
@@ -681,6 +688,7 @@ const char HTTP_SNS_NEOPOOL_CONDUCTIVITY[]     PROGMEM = "{s}%s " D_NEOPOOL_COND
 const char HTTP_SNS_NEOPOOL_IONIZATION[]       PROGMEM = "{s}%s " D_NEOPOOL_IONIZATION      "{m}"  NEOPOOL_FMT_ION    " "  "%s%s"                                 "{e}";
 const char HTTP_SNS_NEOPOOL_FILT_MODE[]        PROGMEM = "{s}%s " D_NEOPOOL_FILT_MODE       "{m}%s"                                                               "{e}";
 const char HTTP_SNS_NEOPOOL_RELAY[]            PROGMEM = "{s}%s " "%s"                      "{m}%s"                                                               "{e}";
+const char HTTP_SNS_NEOPOOL_CELL_RUNTIME[]     PROGMEM = "{s}%s " D_NEOPOOL_CELL_RUNTIME    "{m}%s"                                                               "{e}";
 
 const char HTTP_SNS_NEOPOOL_STATUS[]           PROGMEM = "<span style=\"background-color:%s;font-size:small;text-align:center;%s;\">&nbsp;%s&nbsp;</span>";
 const char HTTP_SNS_NEOPOOL_STATUS_NORMAL[]    PROGMEM = "filter:invert(0.1)";
@@ -730,9 +738,15 @@ const char HTTP_SNS_NEOPOOL_STATUS_ACTIVE[]    PROGMEM = "filter:invert(1)";
  *
  * NPResult {<format>}
  *            get/set addr/data result format read/write commands (format = 0|1):
+ *            get output format if <format> is omitted, otherwise
  *              0 - output as decimal numbers
  *              1 - output as hexadecimal strings (default)
- *            get output format if <format> is omitted, otherwise
+ *
+ * NPOnError {<repeat>}
+ *            get/set auto-repeat Modbus read/write commands on error (repeat = 0..10):
+ *            get auto-repeat setting if <repeat> is omitted, otherwise
+ *              0     - disable auto-repeat on read/write error
+ *              1..10 - repeat commands n times until ok
  *
  * NPPHRes {<digits>}
  * NPCLRes {<digits>}
@@ -830,6 +844,7 @@ const char HTTP_SNS_NEOPOOL_STATUS_ACTIVE[]    PROGMEM = "filter:invert(1)";
 #define D_CMND_NP_SAVE "Save"
 #define D_CMND_NP_EXEC "Exec"
 #define D_CMND_NP_ESCAPE "Escape"
+#define D_CMND_NP_ONERROR "OnError"
 #define D_CMND_NP_PHRES "PHRes"
 #define D_CMND_NP_CLRES "CLRes"
 #define D_CMND_NP_IONRES "IONRes"
@@ -849,6 +864,7 @@ const char kNPCommands[] PROGMEM =  D_PRFX_NEOPOOL "|"  // Prefix
   D_CMND_NP_SAVE "|"
   D_CMND_NP_EXEC "|"
   D_CMND_NP_ESCAPE "|"
+  D_CMND_NP_ONERROR "|"
   D_CMND_NP_PHRES "|"
   D_CMND_NP_CLRES "|"
   D_CMND_NP_IONRES
@@ -869,6 +885,7 @@ void (* const NPCommand[])(void) PROGMEM = {
   &CmndNeopoolSave,
   &CmndNeopoolExec,
   &CmndNeopoolEscape,
+  &CmndNeopoolOnError,
   &CmndNeopoolPHRes,
   &CmndNeopoolCLRes,
   &CmndNeopoolIONRes
@@ -1051,7 +1068,7 @@ void NeoPool250msSetStatus(bool status)
 }
 
 
-uint8_t NeoPoolReadRegister(uint16_t addr, uint16_t *data, uint16_t cnt)
+uint8_t NeoPoolReadRegisterData(uint16_t addr, uint16_t *data, uint16_t cnt)
 {
   bool data_ready;
   uint32_t timeoutMS;
@@ -1099,7 +1116,7 @@ uint8_t NeoPoolReadRegister(uint16_t addr, uint16_t *data, uint16_t cnt)
 }
 
 
-uint8_t NeoPoolWriteRegister(uint16_t addr, uint16_t *data, uint16_t cnt)
+uint8_t NeoPoolWriteRegisterData(uint16_t addr, uint16_t *data, uint16_t cnt)
 {
   uint8_t *frame;
   uint32_t numbytes;
@@ -1176,6 +1193,30 @@ uint8_t NeoPoolWriteRegister(uint16_t addr, uint16_t *data, uint16_t cnt)
 }
 
 
+uint8_t NeoPoolReadRegister(uint16_t addr, uint16_t *data, uint16_t cnt)
+{
+  uint8_t repeat = neopool_repeat_on_error;
+  uint8_t result;
+  do {
+    result = NeoPoolReadRegisterData(addr, data, cnt);
+    SleepDelay(0);
+  } while(repeat-- > 0 || NEOPOOL_MODBUS_OK != result);
+  return result;
+}
+
+
+uint8_t NeoPoolWriteRegister(uint16_t addr, uint16_t *data, uint16_t cnt)
+{
+  uint8_t repeat = neopool_repeat_on_error;
+  uint8_t result;
+  do {
+    result = NeoPoolWriteRegisterData(addr, data, cnt);
+    SleepDelay(0);
+  } while(repeat-- > 0 || NEOPOOL_MODBUS_OK != result);
+  return result;
+}
+
+
 uint8_t NeoPoolWriteRegisterWord(uint16_t addr, uint16_t data)
 {
   return NeoPoolWriteRegister(addr, &data, 1);
@@ -1217,6 +1258,7 @@ uint32_t NeoPoolGetSpeedIndex(uint16_t speedvalue)
 #define D_NEOPOOL_JSON_FILTRATION_MODE        "Mode"
 #define D_NEOPOOL_JSON_FILTRATION_SPEED       "Speed"
 #define D_NEOPOOL_JSON_HYDROLYSIS             "Hydrolysis"
+#define D_NEOPOOL_JSON_CELL_RUNTIME           "Runtime"
 #define D_NEOPOOL_JSON_IONIZATION             "Ionization"
 #define D_NEOPOOL_JSON_LIGHT                  "Light"
 #define D_NEOPOOL_JSON_LIGHT_MODE             "Mode"
@@ -1345,6 +1387,11 @@ void NeoPoolShow(bool json)
       ResponseAppend_P(PSTR(",\""  D_NEOPOOL_JSON_HYDROLYSIS  "\":{\""  D_JSON_DATA  "\":"  NEOPOOL_FMT_HIDRO), dec, &fvalue);
       ResponseAppend_P(PSTR(",\""  D_NEOPOOL_JSON_UNIT  "\":\"%s\""), sunit);
 
+#ifndef NEOPOOL_OPTIMIZE_READINGS
+      ResponseAppend_P(PSTR(",\""  D_NEOPOOL_JSON_CELL_RUNTIME  "\":\"%s\""), 
+        GetDuration((uint32_t)NeoPoolGetData(MBF_CELL_RUNTIME_LOW) + ((uint32_t)NeoPoolGetData(MBF_CELL_RUNTIME_HIGH) << 16)).c_str());
+#endif  // NEOPOOL_OPTIMIZE_READINGS
+
       // S1
       const char *state = PSTR("");
       if (0 == (NeoPoolGetData(MBF_HIDRO_STATUS) & MBMSK_HIDRO_STATUS_MODULE_ACTIVE)) {
@@ -1419,13 +1466,15 @@ void NeoPoolShow(bool json)
       );
 
 #ifndef NEOPOOL_OPTIMIZE_READINGS
-    // Time
+    {
-    char dt[20];
+      // Time
-    TIME_T tmpTime;
+      char dt[20];
-    BreakTime((uint32_t)NeoPoolGetData(MBF_PAR_TIME_LOW) + ((uint32_t)NeoPoolGetData(MBF_PAR_TIME_HIGH) << 16), tmpTime);
+      TIME_T tmpTime;
-    snprintf_P(dt, sizeof(dt), PSTR("%04d-%02d-%02d %02d:%02d"),
+      BreakTime((uint32_t)NeoPoolGetData(MBF_PAR_TIME_LOW) + ((uint32_t)NeoPoolGetData(MBF_PAR_TIME_HIGH) << 16), tmpTime);
-      tmpTime.year +1970, tmpTime.month, tmpTime.day_of_month, tmpTime.hour, tmpTime.minute);
+      snprintf_P(dt, sizeof(dt), PSTR("%04d-%02d-%02d %02d:%02d"),
-    WSContentSend_PD(HTTP_SNS_NEOPOOL_TIME, neopool_type, dt);
+        tmpTime.year +1970, tmpTime.month, tmpTime.day_of_month, tmpTime.hour, tmpTime.minute);
+      WSContentSend_PD(HTTP_SNS_NEOPOOL_TIME, neopool_type, dt);
+    }
 #endif  // NEOPOOL_OPTIMIZE_READINGS
 
     // Temperature
@@ -1598,6 +1647,18 @@ void NeoPoolShow(bool json)
       WSContentSend_PD(HTTP_SNS_NEOPOOL_RELAY,neopool_type, sdesc,
         '\0' == *stemp ? ((NeoPoolGetData(MBF_RELAY_STATE) & (1<<i))?PSTR(D_ON):PSTR(D_OFF)) : stemp);
     }
+
+#ifndef NEOPOOL_OPTIMIZE_READINGS
+    {
+      // Cell runtime
+      char dt[16];
+      TIME_T tmpTime;
+      BreakTime((uint32_t)NeoPoolGetData(MBF_CELL_RUNTIME_LOW) + ((uint32_t)NeoPoolGetData(MBF_CELL_RUNTIME_HIGH) << 16), tmpTime);
+      snprintf_P(dt, sizeof(dt), PSTR("%dT%02d:%02d"), tmpTime.days, tmpTime.hour, tmpTime.minute);
+      WSContentSend_PD(HTTP_SNS_NEOPOOL_CELL_RUNTIME, neopool_type, dt);
+    }
+#endif  // NEOPOOL_OPTIMIZE_READINGS
+
 #endif  // USE_WEBSERVER
   }
 }
@@ -2011,6 +2072,15 @@ void CmndNeopoolEscape(void)
 }
 
 
+void CmndNeopoolOnError(void)
+{
+  if (XdrvMailbox.data_len && XdrvMailbox.payload >= 0 && XdrvMailbox.payload <= NEOPOOL_MAX_REPEAT_ON_ERROR) {
+     neopool_repeat_on_error = XdrvMailbox.payload;
+  }
+  ResponseCmndNumber(neopool_repeat_on_error);
+}
+
+
 void CmndNeopoolPHRes(void)
 {
   if (XdrvMailbox.data_len && XdrvMailbox.payload >= 0 && XdrvMailbox.payload <= 3) {