Add experimental support for NRF24L01 as BLE-bridge

Add experimental support for NRF24L01 as BLE-bridge for Mijia Bluetooth sensors by Christian Baars (#7394)

RELEASENOTES.md

@@ -69,3 +69,4 @@ The following binary downloads have been compiled with ESP8266/Arduino library c
 - Add Zigbee attribute decoder for Xiaomi Aqara Cube
 - Add support for ``AdcParam`` parameters to control ADC0 Current Transformer Apparent Power formula by Jodi Dillon (#7100)
 - Add optional support for Prometheus using file xsns_91_prometheus.ino (#7216)
+- Add experimental support for NRF24L01 as BLE-bridge for Mijia Bluetooth sensors by Christian Baars (#7394)

tasmota/CHANGELOG.md

@@ -5,6 +5,7 @@
 - Add support for ``AdcParam`` parameters to control ADC0 Current Transformer Apparent Power formula by Jodi Dillon (#7100)
 - Add optional support for Prometheus using file xsns_91_prometheus.ino (#7216)
 - Add command ``ShutterButton <parameters>`` to control shutter(s) by to-scho (#7403)
+- Add experimental support for NRF24L01 as BLE-bridge for Mijia Bluetooth sensors by Christian Baars (#7394)
 - Fix LCD line and column positioning (#7387)
 - Fix Display handling of hexadecimal escape characters (#7387)
 - Fix Improved fade linearity with gamma correction

tasmota/my_user_config.h

@@ -440,24 +440,20 @@
 
 // -- SPI sensors ---------------------------------
 //#define USE_SPI                                  // Hardware SPI using GPIO12(MISO), GPIO13(MOSI) and GPIO14(CLK) in addition to two user selectable GPIOs(CS and DC)
-
 #ifdef USE_SPI
-  // #ifndef USE_DISPLAY
+//  #define USE_NRF24                              // Add SPI support for NRF24L01(+) (+2k6 code)
-  // #define USE_DISPLAY                            // Add SPI Display support for 320x240 and 480x320 TFT
+  #ifdef USE_NRF24
-  // #endif
+    #define USE_MIBLE                            // BLE-bridge for some Mijia-BLE-sensors (+4k7 code)
-  //   #define USE_DISPLAY_ILI9341                  // [DisplayModel 4] Enable ILI9341 Tft 480x320 display (+19k code)
+  #else
+    #ifndef USE_DISPLAY
+      #define USE_DISPLAY                        // Add SPI Display support for 320x240 and 480x320 TFT
+    #endif
+      #define USE_DISPLAY_ILI9341                // [DisplayModel 4] Enable ILI9341 Tft 480x320 display (+19k code)
 //      #define USE_DISPLAY_EPAPER_29              // [DisplayModel 5] Enable e-paper 2.9 inch display (+19k code)
 //      #define USE_DISPLAY_EPAPER_42              // [DisplayModel 6] Enable e-paper 4.2 inch display
 //      #define USE_DISPLAY_ILI9488                // [DisplayModel 8] [I2cDriver38] (Touch)
 //      #define USE_DISPLAY_SSD1351                // [DisplayModel 9]
 //      #define USE_DISPLAY_RA8876                 // [DisplayModel 10] [I2cDriver39] (Touch)
-  
-  #define USE_NRF24                                // add support for NRF24L01(+), (+2k3 of code)
-    #ifdef USE_DISPLAY
-      #undef USE_DISPLAY                           // Display drivers should be disabled
-    #endif
-    #ifdef USE_NRF24
-      #define USE_MIBLE                            // BLE-bridge for some Mijia-BLE-sensors (+4k6 of code)
   #endif  // USE_NRF24
 #endif  // USE_SPI
 

tasmota/xdrv_33_nrf24l01.ino

@@ -1,14 +1,18 @@
 /*
-  nrf24l01 support for Tasmota
+  xdrv_33_nrf24l01.ino - nrf24l01 support for Tasmota
-  Copyright (C) 2019  Christian Baars and Theo Arends
+
+  Copyright (C) 2020  Christian Baars and Theo Arends
+
   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.
+
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
+
   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 

tasmota/xsns_61_MI_BLE.ino

@@ -1,14 +1,18 @@
 /*
-  MI-BLE-sensors via nrf24l01 support for Tasmota
+  xsns_61_Ml_BLE.ino - MI-BLE-sensors via nrf24l01 support for Tasmota
-  Copyright (C) 2019  Christian Baars and Theo Arends
+
+  Copyright (C) 2020  Christian Baars and Theo Arends
+
   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.
+
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
+
   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.