diff --git a/lib/lib_basic/OneWire-Stickbreaker-20190506-1.1/OneWire.cpp b/lib/lib_basic/OneWire-Stickbreaker-20190506-1.1/OneWire.cpp
index 4476ff53a..8a7309865 100644
--- a/lib/lib_basic/OneWire-Stickbreaker-20190506-1.1/OneWire.cpp
+++ b/lib/lib_basic/OneWire-Stickbreaker-20190506-1.1/OneWire.cpp
@@ -152,9 +152,12 @@ sample code bearing this copyright.
 
 #include "OneWire.h"
 
-#ifdef ARDUINO_ARCH_ESP32
-#define noInterrupts() {portMUX_TYPE mux = portMUX_INITIALIZER_UNLOCKED;portENTER_CRITICAL(&mux)
-#define interrupts() portEXIT_CRITICAL(&mux);}
+#ifdef ESP32
+#define t_noInterrupts() {portMUX_TYPE mux = portMUX_INITIALIZER_UNLOCKED;portENTER_CRITICAL(&mux)
+#define t_interrupts() portEXIT_CRITICAL(&mux);}
+#else
+#define t_noInterrupts noInterrupts
+#define t_interrupts interrupts
 #endif
 
 OneWire::OneWire(uint8_t pin)
@@ -184,23 +187,23 @@ uint8_t OneWire::reset(void)
     volatile IO_REG_TYPE *reg IO_REG_BASE_ATTR = baseReg;
     uint8_t r;
     uint8_t retries = 125;
-    noInterrupts();
+    t_noInterrupts();
     DIRECT_MODE_INPUT(reg, mask);
-    interrupts();
+    t_interrupts();
     // wait until the wire is high... just in case
     do {
         if (--retries == 0) return 0;
         delayMicroseconds(2);
     } while ( !DIRECT_READ(reg, mask));
  
-    noInterrupts();
+    t_noInterrupts();
     DIRECT_WRITE_LOW(reg, mask);
     DIRECT_MODE_OUTPUT(reg, mask);  // drive output low
     delayMicroseconds(480);
     DIRECT_MODE_INPUT(reg, mask);   // allow it to float
     delayMicroseconds(70);
     r = !DIRECT_READ(reg, mask);
-    interrupts();
+    t_interrupts();
     delayMicroseconds(410);
   return r;
 }
@@ -219,20 +222,20 @@ void OneWire::write_bit(uint8_t v)
 	volatile IO_REG_TYPE *reg IO_REG_BASE_ATTR = baseReg;
 
 	if (v & 1) {
-        noInterrupts();
+        t_noInterrupts();
 		DIRECT_WRITE_LOW(reg, mask);
 		DIRECT_MODE_OUTPUT(reg, mask);	// drive output low
 		delayMicroseconds(10);
 		DIRECT_WRITE_HIGH(reg, mask);	// drive output high
-        interrupts();
+        t_interrupts();
 		delayMicroseconds(55);
 	} else {
-        noInterrupts();
+        t_noInterrupts();
 		DIRECT_WRITE_LOW(reg, mask);
 		DIRECT_MODE_OUTPUT(reg, mask);	// drive output low
 		delayMicroseconds(65);
 		DIRECT_WRITE_HIGH(reg, mask);	// drive output high
-        interrupts();
+        t_interrupts();
 		delayMicroseconds(5);
 	}
 }
@@ -251,14 +254,14 @@ uint8_t OneWire::read_bit(void)
 	volatile IO_REG_TYPE *reg IO_REG_BASE_ATTR = baseReg;
 	uint8_t r;
 
-    noInterrupts();
+    t_noInterrupts();
 	DIRECT_MODE_OUTPUT(reg, mask);
 	DIRECT_WRITE_LOW(reg, mask);
 	delayMicroseconds(3);
 	DIRECT_MODE_INPUT(reg, mask);	// let pin float, pull up will raise
 	delayMicroseconds(10);
 	r = DIRECT_READ(reg, mask);
-    interrupts();
+    t_interrupts();
 	delayMicroseconds(53);
 	return r;
 }
@@ -277,10 +280,10 @@ void OneWire::write(uint8_t v, uint8_t power /* = 0 */) {
     OneWire::write_bit( (bitMask & v)?1:0);
   }
   if ( !power) {
-      noInterrupts();
+      t_noInterrupts();
       DIRECT_MODE_INPUT(baseReg, bitmask);
       DIRECT_WRITE_LOW(baseReg, bitmask);
-      interrupts();
+      t_interrupts();
   }
 }
 
@@ -288,10 +291,10 @@ void OneWire::write_bytes(const uint8_t *buf, uint16_t count, bool power /* = 0
   for (uint16_t i = 0 ; i < count ; i++)
     write(buf[i]);
   if (!power) {
-    noInterrupts();
+    t_noInterrupts();
     DIRECT_MODE_INPUT(baseReg, bitmask);
     DIRECT_WRITE_LOW(baseReg, bitmask);
-    interrupts();
+    t_interrupts();
   }
 }
 
@@ -335,9 +338,9 @@ void OneWire::skip()
 
 void OneWire::depower()
 {
-    noInterrupts();
+    t_noInterrupts();
     DIRECT_MODE_INPUT(baseReg, bitmask);
-    interrupts();
+    t_interrupts();
 }
 
 #if ONEWIRE_SEARCH
@@ -615,11 +618,4 @@ uint16_t OneWire::crc16(const uint8_t* input, uint16_t len, uint16_t crc)
     return crc;
 }
 #endif
-
-
-#ifdef ARDUINO_ARCH_ESP32
-#undef noInterrupts()
-#undef interrupts()
-#endif
-
-#endif
+#endif
\ No newline at end of file