Bump version v14.4.1.4

- Formatter `%_U` for `ext_snprintf_P()` to print uint64_t variable as decimal equivalent to `%llu` - Support for RC-switch decoding of 64-bit received data
2025-07-24 11:16:34 +00:00 · 2025-02-04 15:07:03 +01:00 · 2025-02-04 15:07:03 +01:00 · c9cd6aae1d
commit c9cd6aae1d
parent ab9ad562cb
6 changed files with 64 additions and 17 deletions
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@ -3,7 +3,21 @@ All notable changes to this project will be documented in this file.

 ## [Unreleased] - Development

-## [14.4.1.3] 
+## [14.4.1.4]
+### Added
+- Formatter `%_U` for `ext_snprintf_P()` to print uint64_t variable as decimal equivalent to `%llu`
+- Support for RC-switch decoding of 64-bit received data
+
+### Breaking Changed
+
+### Changed
+- ESP32 Platform from 2025.01.31 to 2025.02.30, Framework (Arduino Core) from v3.1.1.250109 to v3.1.1.250203 and IDF to 5.3.2 (#22943)
+
+### Fixed
+
+### Removed
+
+## [14.4.1.3] 20250204
 ### Added
 - Command `FileLog 0..4` to enable logging to filesystem using up to 16 rotating log files of 100kB (`#define FILE_LOG_SIZE 100`)
 - Command `FileLog 10..14` to enable logging to filesystem using up to 16 log files of 100kB (`#define FILE_LOG_SIZE 100`)
@ -25,8 +39,6 @@ All notable changes to this project will be documented in this file.
 - Support for C8-CO2-5K CO2 sensor (#22905)
 - `#define FIX_JSON_HEXADECIMAL` to change JSON hexadecimal value "FF5F78" into "0xFF5F78" (#22919)

-### Breaking Changed
-
 ### Changed
 - ESP32 Platform from 2024.12.30 to 2025.01.30, Framework (Arduino Core) from v3.1.0.241206 to v3.1.1.250109 and IDF to 5.3.2 (#22792)
 - Allow negative values for AdcParam/AdcGpio INPUT, TEMP and RANGE parameters (#22809)
@ -41,9 +53,6 @@ All notable changes to this project will be documented in this file.
 - ESP32-Cx compilation fails on Windows (#22832)
 - LoraWan decoding of Dragino LDS02 and MerryIoT DW10 (#22880)

-### Removed
-
-
 ## [14.4.1.2] 20250110
 ### Added
 - Support for ESP32 Two-Wire Automotive Interface (TWAI) or Controller Area Network (CAN) busses
--- a/RELEASENOTES.md
+++ b/RELEASENOTES.md
@ -114,7 +114,7 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm

 [Complete list](BUILDS.md) of available feature and sensors.

-## Changelog v14.4.1.3
+## Changelog v14.4.1.4
 ### Added
 - Command `SetOption163 1` to disable display of Device name in GUI header
 - Command `FileLog 0..4` to enable logging to filesystem using up to 16 rotating log files of 100kB (`#define FILE_LOG_SIZE 100`)
@ -125,6 +125,8 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm
 - Support for C8-CO2-5K CO2 sensor [#22905](https://github.com/arendst/Tasmota/issues/22905)
 - Support for ESP32 Two-Wire Automotive Interface (TWAI) or Controller Area Network (CAN) busses
 - `#define FIX_JSON_HEXADECIMAL` to change JSON hexadecimal value "FF5F78" into "0xFF5F78" [#22919](https://github.com/arendst/Tasmota/issues/22919)
+- Support for RC-switch decoding of 64-bit received data
+- Formatter `%_U` for `ext_snprintf_P()` to print uint64_t variable as decimal equivalent to `%llu`
 - GPS driver select baudrate using GPIO GPS_RX1 (9600bps), GPS_RX2 (19200bps) or GPS_RX3 (38400bps) [#22869](https://github.com/arendst/Tasmota/issues/22869)
 - I2S AAC support for web radio [#22787](https://github.com/arendst/Tasmota/issues/22787)
 - I2S Opus stream and file support for opus/aac [#22795](https://github.com/arendst/Tasmota/issues/22795)
@ -154,7 +156,7 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm
 ### Breaking Changed

 ### Changed
- ESP32 Platform from 2024.12.30 to 2025.01.31, Framework (Arduino Core) from v3.1.0.241206 to v3.1.1.250109 and IDF to 5.3.2 [#22832](https://github.com/arendst/Tasmota/issues/22832)
+- ESP32 Platform from 2024.12.30 to 2025.02.30, Framework (Arduino Core) from v3.1.0.241206 to v3.1.1.250203 and IDF to 5.3.2 [#22943](https://github.com/arendst/Tasmota/issues/22943)
 - GPIOViewer from v1.5.6 to v1.6.1 (No functional change)
 - Postpone save_data during light animation when fade is Off
 - Allow negative values for AdcParam/AdcGpio INPUT, TEMP and RANGE parameters [#22809](https://github.com/arendst/Tasmota/issues/22809)
--- a/lib/default/Ext-printf/src/ext_printf.cpp
+++ b/lib/default/Ext-printf/src/ext_printf.cpp
@ -177,6 +177,22 @@ char * ToBinary(uint32_t value, char *str, int32_t digits) {
  return str;
 }

+char * U64toStr(uint64_t value, char *str) {
+  // str must be at least 24 bytes long
+  uint32_t i = 23;
+  str[--i] = 0;    // end of string
+  do {
+    uint64_t m = value;
+    value /= 10;
+    char c = m - 10 * value;
+    str[--i] = c < 10 ? c + '0' : c + 'A' - 10;
+  } while (value);
+  if (i) {
+    memmove(str, str +i, 23 -i);
+  }
+  return str;
+}
+
 char * U64toHex(uint64_t value, char *str, uint32_t zeroleads) {
  // str must be at least 17 bytes long
  str[16] = 0;    // end of string
@ -310,6 +326,7 @@ int32_t ext_vsnprintf_P(char * out_buf, size_t buf_len, const char * fmt_P, va_l
              }
            }
            break;
+
          case 'B':     // Pointer to SBuffer
            {
              if (cur_val < min_valid_ptr) { new_val_str = ext_invalid_mem; }
@ -326,6 +343,7 @@ int32_t ext_vsnprintf_P(char * out_buf, size_t buf_len, const char * fmt_P, va_l
              }
            }
            break;
+
          // '%_b' outputs a uint32_t to binary
          // '%8_b' outputs a uint8_t to binary
          case 'b':     // Binary, decimals indicates the zero prefill
@ -416,6 +434,7 @@ int32_t ext_vsnprintf_P(char * out_buf, size_t buf_len, const char * fmt_P, va_l
              }
            }
            break;
+
          // '%_X' outputs a 64 bits unsigned int to uppercase HEX with 16 digits
          case 'X':     // input is `uint64_t*`, printed as 16 hex digits (no prefix 0x)
            {
@ -429,6 +448,20 @@ int32_t ext_vsnprintf_P(char * out_buf, size_t buf_len, const char * fmt_P, va_l
              }
            }
            break;
+
+          // '%_U' outputs a 64 bits unsigned int to decimal
+          case 'U':     // input is `uint64_t*`, printed as decimal
+            {
+              if (cur_val < min_valid_ptr) { new_val_str = ext_invalid_mem; }
+              else {
+                U64toStr(*(uint64_t*)cur_val, hex);
+                new_val_str = copyStr(hex);
+                if (new_val_str == nullptr) { goto free_allocs; }
+                allocs[alloc_idx++] = new_val_str;
+              }
+            }
+            break;
+
        }
        *cur_val_ptr = new_val_str;
        *fmt = 's';     // replace `%_X` with `%0s` to display a string instead
--- a/lib/default/Ext-printf/test/test_ext_printf.cpp
+++ b/lib/default/Ext-printf/test/test_ext_printf.cpp
@ -66,11 +66,14 @@ void test_ext_snprintf_P(void) {
  Serial.printf("--> out=%s\n", c);
  ext_snprintf_P(c, sizeof(c), "Float default=%*_f, int(3)=%*_f, int(3)=%*_f, int(3)=%*_f, 6dec=%*_f", 1, &fpi, 4, &f3, -4, &f3, -4, &f31, -8, &fpi);
  Serial.printf("--> out=%s\n", c);
-  uint64_t u641 = 0x1122334455667788LL;
-  uint64_t u642 = 0x0123456789ABCDEFLL;
-  uint64_t u643 = 0xFEDCBA9876543210LL;
+
+  uint64_t u641 = 0x1122334455667788LL;  // 1234605616436508552
+  uint64_t u642 = 0x0123456789ABCDEFLL;  // 81985529216486895
+  uint64_t u643 = 0xFEDCBA9876543210LL;  // 18364758544493064720
  ext_snprintf_P(c, sizeof(c), "Int64 0x%_X 0x%_X 0x%_X", &u641, &u642, &u643);
  Serial.printf("--> out=%s\n", c);
+  ext_snprintf_P(c, sizeof(c), "Int64 decimal %_U %_U %_U", &u641, &u642, &u643);
+  Serial.printf("--> out=%s\n", c);

  // ext_snprintf_P(c, sizeof(c), "Float default=%*_f, int(3)=%*_f, int(3)=%*_f, int(3)=%*_f, 6dec=%*_f", &fpi, &f3, &f3, &f31, &fpi);

--- a/tasmota/include/tasmota_version.h
+++ b/tasmota/include/tasmota_version.h
@ -22,6 +22,6 @@

 #define TASMOTA_SHA_SHORT                      // Filled by Github sed

-const uint32_t TASMOTA_VERSION = 0x0E040103;   // 14.4.1.3
+const uint32_t TASMOTA_VERSION = 0x0E040104;   // 14.4.1.4

 #endif  // _TASMOTA_VERSION_H_
--- a/tasmota/tasmota_xdrv_driver/xdrv_17_rcswitch.ino
+++ b/tasmota/tasmota_xdrv_driver/xdrv_17_rcswitch.ino
@ -51,22 +51,22 @@ uint32_t rf_lasttime = 0;
 void RfReceiveCheck(void) {
  if (mySwitch.available()) {

-    unsigned long data = mySwitch.getReceivedValue();
+    uint64_t data = mySwitch.getReceivedValue();
    unsigned int bits = mySwitch.getReceivedBitlength();
    int protocol = mySwitch.getReceivedProtocol();
    int delay = mySwitch.getReceivedDelay();

-    AddLog(LOG_LEVEL_DEBUG, PSTR("RFR: Data 0x%lX (%u), Bits %d, Protocol %d, Delay %d"), data, data, bits, protocol, delay);
+    AddLog(LOG_LEVEL_DEBUG, PSTR("RFR: Data 0x%_X (%_U), Bits %d, Protocol %d, Delay %d"), &data, &data, bits, protocol, delay);

    uint32_t now = millis();
    if ((now - rf_lasttime > Settings->rf_duplicate_time) && (data > 0)) {
      rf_lasttime = now;

-      char stemp[16];
+      char stemp[24];
      if (Settings->flag.rf_receive_decimal) {      // SetOption28 - RF receive data format (0 = hexadecimal, 1 = decimal)
-        snprintf_P(stemp, sizeof(stemp), PSTR("%u"), (uint32_t)data);
+        ext_snprintf_P(stemp, sizeof(stemp), PSTR("%_U"), &data);
      } else {
-        snprintf_P(stemp, sizeof(stemp), PSTR("\"0x%lX\""), (uint32_t)data);
+        ext_snprintf_P(stemp, sizeof(stemp), PSTR("\"0x%_X\""), &data);
      }
      ResponseTime_P(PSTR(",\"" D_JSON_RFRECEIVED "\":{\"" D_JSON_RF_DATA "\":%s,\"" D_JSON_RF_BITS "\":%d,\"" D_JSON_RF_PROTOCOL "\":%d,\"" D_JSON_RF_PULSE "\":%d}}"),
        stemp, bits, protocol, delay);