From d87fd6284c9551fb822a5bb4186ddbbe8d28f9f2 Mon Sep 17 00:00:00 2001 From: Adrian Scillato <35405447+ascillato@users.noreply.github.com> Date: Wed, 18 Apr 2018 22:37:55 -0300 Subject: [PATCH] Delete xdrv_11_KNX.ino --- sonoff/xdrv_11_KNX.ino | 885 ----------------------------------------- 1 file changed, 885 deletions(-) delete mode 100644 sonoff/xdrv_11_KNX.ino diff --git a/sonoff/xdrv_11_KNX.ino b/sonoff/xdrv_11_KNX.ino deleted file mode 100644 index 2ae2cb7c0..000000000 --- a/sonoff/xdrv_11_KNX.ino +++ /dev/null @@ -1,885 +0,0 @@ -/* - xdrv_11_KNX.ino - KNX IP Protocol support for Sonoff-Tasmota - - Copyright (C) 2018 Adrian Scillato (https://github.com/ascillato) - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -#ifdef USE_KNX - - -#include // Include ESP KNX IP library (async-udp branch) (https://github.com/envy/esp-knx-ip/tree/async-udp) - // The ESP KNX IP library requires also ESPAsyncUDP library (https://github.com/me-no-dev/ESPAsyncUDP) - // - // A copy of both libraries is available also at: - // https://github.com/ascillato/Sonoff-Tasmota_KNX/tree/development/lib/esp-knx-ip-async-udp - // https://github.com/ascillato/Sonoff-Tasmota_KNX/tree/development/lib/ESPAsyncUDP-master - -/* -Variables in settings.h ------------------------ - -bool Settings.flag.knx_enabled Enable/Disable KNX Protocol -uint16_t Settings.knx_physsical_addr Physical KNX address of this device -byte Settings.knx_GA_registered Number of group address to read -byte Settings.knx_CB_registered Number of group address to write -uint16_t Settings.knx_GA_addr[MAX_KNX_GA] Group address to read -uint16_t Settings.knx_CB_addr[MAX_KNX_CB] Group address to write -byte Settings.knx_GA_param[MAX_KNX_GA] Type of Input (relay changed, button pressed, sensor read) -byte Settings.knx_CB_param[MAX_KNX_CB] Type of Output (set relay, toggle relay, reply sensor value) - -Constants in sonoff.h ------------------------ - -#define MAX_KNX_GA 10 Max number of KNX Group Addresses to read that can be set -#define MAX_KNX_CB 10 Max number of KNX Group Addresses to write that can be set - If you change MAX_KNX_CB you also have to change on the esp-knx-ip.h file the following: - #define MAX_CALLBACK_ASSIGNMENTS 10 - #define MAX_CALLBACKS 10 - Both to MAX_KNX_CB - -void KNX_CB_Action(message_t const &msg, void *arg); // Define function (action callback) to be called by the KNX_IP Library - // when an action is requested by another KNX Device -*/ - -address_t KNX_physs_addr; // Physical KNX address of this device -address_t KNX_addr; // KNX Address converter variable - -#define KNX_Empty 255 -#define KNX_temperature 17 -#define KNX_humidity 18 -#define KNX_MAX_device_param 18 - -float last_temp; -float last_hum; - -typedef struct __device_parameters -{ - byte type; // PARAMETER_ID. Used as type of GA = relay, button, sensor, etc, (INPUTS) - // used when an action on device triggers a MSG to send on KNX - // Needed because this is the value that the ESP_KNX_IP library will pass as parameter - // to identify the action to perform when a MSG is received - - bool show; // HARDWARE related. to identify if the parameter exists on the device. - - bool last_state; // LAST_STATE of relays - - callback_id_t CB_id; // ACTION_ID. To store the ID value of Registered_CB to the library. - // The ESP_KNX_IP requires to register the callbacks, and then, to assign an address to the registered callback - // So CB_id is needed to store the ID of the callback to then, assign multiple addresses to the same ID (callback) - // It is used as type of CB = set relay, toggle relay, reply sensor, etc, (OUTPUTS) - // used when a MSG receive KNX triggers an action on the device - // - Multiples address to the same callback (i.e. Set Relay 1 Status) are used on scenes for example -} device_parameters_t; - -// device parameters (information that can be sent) -device_parameters_t device_param[] = { - { 1, false, false, KNX_Empty }, // device_param[ 0] = Relay 1 - { 2, false, false, KNX_Empty }, // device_param[ 1] = Relay 2 - { 3, false, false, KNX_Empty }, // device_param[ 2] = Relay 3 - { 4, false, false, KNX_Empty }, // device_param[ 3] = Relay 4 - { 5, false, false, KNX_Empty }, // device_param[ 4] = Relay 5 - { 6, false, false, KNX_Empty }, // device_param[ 5] = Relay 6 - { 7, false, false, KNX_Empty }, // device_param[ 6] = Relay 7 - { 8, false, false, KNX_Empty }, // device_param[ 7] = Relay 8 - { 9, false, false, KNX_Empty }, // device_param[ 8] = Button 1 - { 10, false, false, KNX_Empty }, // device_param[ 9] = Button 2 - { 11, false, false, KNX_Empty }, // device_param[10] = Button 3 - { 12, false, false, KNX_Empty }, // device_param[11] = Button 4 - { 13, false, false, KNX_Empty }, // device_param[12] = Button 5 - { 14, false, false, KNX_Empty }, // device_param[13] = Button 6 - { 15, false, false, KNX_Empty }, // device_param[14] = Button 7 - { 16, false, false, KNX_Empty }, // device_param[15] = Button 8 - { KNX_temperature, false, false, KNX_Empty }, // device_param[16] = Temperature - { KNX_humidity , false, false, KNX_Empty }, // device_param[17] = humidity - { KNX_Empty, false, false, KNX_Empty} -}; - -// device parameters (information that can be sent) -const char * device_param_ga[] = { - D_SENSOR_RELAY " 1", // Relay 1 - D_SENSOR_RELAY " 2", // Relay 2 - D_SENSOR_RELAY " 3", // Relay 3 - D_SENSOR_RELAY " 4", // Relay 4 - D_SENSOR_RELAY " 5", // Relay 5 - D_SENSOR_RELAY " 6", // Relay 6 - D_SENSOR_RELAY " 7", // Relay 7 - D_SENSOR_RELAY " 8", // Relay 8 - D_SENSOR_BUTTON " 1", // Button 1 - D_SENSOR_BUTTON " 2", // Button 2 - D_SENSOR_BUTTON " 3", // Button 3 - D_SENSOR_BUTTON " 4", // Button 4 - D_SENSOR_BUTTON " 5", // Button 5 - D_SENSOR_BUTTON " 6", // Button 6 - D_SENSOR_BUTTON " 7", // Button 7 - D_SENSOR_BUTTON " 8", // Button 8 - D_TEMPERATURE , // Temperature - D_HUMIDITY , // Humidity - nullptr -}; - -// device actions (posible actions to be performed on the device) -const char *device_param_cb[] = { - D_SENSOR_RELAY " 1", // Set Relay 1 (1-On or 0-OFF) - D_SENSOR_RELAY " 2", - D_SENSOR_RELAY " 3", - D_SENSOR_RELAY " 4", - D_SENSOR_RELAY " 5", - D_SENSOR_RELAY " 6", - D_SENSOR_RELAY " 7", - D_SENSOR_RELAY " 8", - D_SENSOR_RELAY " 1 " D_BUTTON_TOGGLE, // Relay 1 Toggle (1 or 0 will toggle) - D_SENSOR_RELAY " 2 " D_BUTTON_TOGGLE, - D_SENSOR_RELAY " 3 " D_BUTTON_TOGGLE, - D_SENSOR_RELAY " 4 " D_BUTTON_TOGGLE, - D_SENSOR_RELAY " 5 " D_BUTTON_TOGGLE, - D_SENSOR_RELAY " 6 " D_BUTTON_TOGGLE, - D_SENSOR_RELAY " 7 " D_BUTTON_TOGGLE, - D_SENSOR_RELAY " 8 " D_BUTTON_TOGGLE, - D_REPLY " " D_TEMPERATURE, // Reply Temperature - D_REPLY " " D_HUMIDITY, // Reply Humidity - nullptr -}; - - -byte KNX_GA_Search( byte param, byte start = 0 ) -{ - for (byte i = start; i < Settings.knx_GA_registered; ++i) - { - if ( Settings.knx_GA_param[i] == param ) - { - if ( Settings.knx_GA_addr[i] != 0 ) // Relay has group address set? GA=0/0/0 can not be used as KNX address, so it is used here as a: not set value - { - if ( i >= start ) { return i; } - } - } - } - return KNX_Empty; -} - - -byte KNX_CB_Search( byte param, byte start = 0 ) -{ - for (byte i = start; i < Settings.knx_CB_registered; ++i) - { - if ( Settings.knx_CB_param[i] == param ) - { - if ( Settings.knx_CB_addr[i] != 0 ) - { - if ( i >= start ) { return i; } - } - } - } - return KNX_Empty; -} - - -void KNX_ADD_GA( byte GAop, byte GA_FNUM, byte GA_AREA, byte GA_FDEF ) -{ - // Check if all GA were assigned. If yes-> return - if ( Settings.knx_GA_registered >= MAX_KNX_GA ) { return; } - if ( GA_FNUM == 0 && GA_AREA == 0 && GA_FDEF == 0 ) { return; } - - // Assign a GA to that address - Settings.knx_GA_param[Settings.knx_GA_registered] = GAop; - KNX_addr.ga.area = GA_FNUM; - KNX_addr.ga.line = GA_AREA; - KNX_addr.ga.member = GA_FDEF; - Settings.knx_GA_addr[Settings.knx_GA_registered] = KNX_addr.value; - - Settings.knx_GA_registered++; - - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_ADD " GA #%d: %s " D_TO " %d/%d/%d"), - Settings.knx_GA_registered, - device_param_ga[GAop-1], - GA_FNUM, GA_AREA, GA_FDEF ); - AddLog(LOG_LEVEL_DEBUG); -} - - -void KNX_DEL_GA( byte GAnum ) -{ - - byte dest_offset = 0; - byte src_offset = 0; - byte len = 0; - - // Delete GA - Settings.knx_GA_param[GAnum-1] = 0; - - if (GAnum == 1) - { - // start of array, so delete first entry - src_offset = 1; - // Settings.knx_GA_registered will be 1 in case of only one entry - // Settings.knx_GA_registered will be 2 in case of two entries, etc.. - // so only copy anything, if there is it at least more then one element - len = (Settings.knx_GA_registered - 1); - } - else if (GAnum == Settings.knx_GA_registered) - { - // last element, don't do anything, simply decrement counter - } - else - { - // somewhere in the middle - // need to calc offsets - - // skip all prev elements - dest_offset = GAnum -1 ; // GAnum -1 is equal to how many element are in front of it - src_offset = dest_offset + 1; // start after the current element - len = (Settings.knx_GA_registered - GAnum); - } - - if (len > 0) - { - memmove(Settings.knx_GA_param + dest_offset, Settings.knx_GA_param + src_offset, len * sizeof(byte)); - memmove(Settings.knx_GA_addr + dest_offset, Settings.knx_GA_addr + src_offset, len * sizeof(uint16_t)); - } - - Settings.knx_GA_registered--; - - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_DELETE " GA #%d"), - GAnum ); - AddLog(LOG_LEVEL_DEBUG); -} - - -void KNX_ADD_CB( byte CBop, byte CB_FNUM, byte CB_AREA, byte CB_FDEF ) -{ - // Check if all callbacks were assigned. If yes-> return - if ( Settings.knx_CB_registered >= MAX_KNX_CB ) { return; } - if ( CB_FNUM == 0 && CB_AREA == 0 && CB_FDEF == 0 ) { return; } - - // Check if a CB for CBop was registered on the ESP-KNX-IP Library - if ( device_param[CBop-1].CB_id == KNX_Empty ) - { - // if no, register the CB for CBop - device_param[CBop-1].CB_id = knx.callback_register("", KNX_CB_Action, &device_param[CBop-1]); - // KNX IP Library requires a parameter - // to identify which action was requested on the KNX network - // to be performed on this device (set relay, etc.) - // Is going to be used device_param[j].type that stores the type number (1: relay 1, etc) - } - // Assign a callback to CB address - Settings.knx_CB_param[Settings.knx_CB_registered] = CBop; - KNX_addr.ga.area = CB_FNUM; - KNX_addr.ga.line = CB_AREA; - KNX_addr.ga.member = CB_FDEF; - Settings.knx_CB_addr[Settings.knx_CB_registered] = KNX_addr.value; - - knx.callback_assign( device_param[CBop-1].CB_id, KNX_addr ); - - Settings.knx_CB_registered++; - - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_ADD " CB #%d: %d/%d/%d " D_TO " %s"), - Settings.knx_CB_registered, - CB_FNUM, CB_AREA, CB_FDEF, - device_param_cb[CBop-1] ); - AddLog(LOG_LEVEL_DEBUG); -} - - -void KNX_DEL_CB( byte CBnum ) -{ - byte oldparam = Settings.knx_CB_param[CBnum-1]; - byte dest_offset = 0; - byte src_offset = 0; - byte len = 0; - - // Delete assigment - knx.callback_unassign(CBnum-1); - Settings.knx_CB_param[CBnum-1] = 0; - - if (CBnum == 1) - { - // start of array, so delete first entry - src_offset = 1; - // Settings.knx_CB_registered will be 1 in case of only one entry - // Settings.knx_CB_registered will be 2 in case of two entries, etc.. - // so only copy anything, if there is it at least more then one element - len = (Settings.knx_CB_registered - 1); - } - else if (CBnum == Settings.knx_CB_registered) - { - // last element, don't do anything, simply decrement counter - } - else - { - // somewhere in the middle - // need to calc offsets - - // skip all prev elements - dest_offset = CBnum -1 ; // GAnum -1 is equal to how many element are in front of it - src_offset = dest_offset + 1; // start after the current element - len = (Settings.knx_CB_registered - CBnum); - } - - if (len > 0) - { - memmove(Settings.knx_CB_param + dest_offset, Settings.knx_CB_param + src_offset, len * sizeof(byte)); - memmove(Settings.knx_CB_addr + dest_offset, Settings.knx_CB_addr + src_offset, len * sizeof(uint16_t)); - } - - Settings.knx_CB_registered--; - - // Check if there is no other assigment to that callback. If there is not. delete that callback register - if ( KNX_CB_Search( oldparam ) == KNX_Empty ) { - knx.callback_deregister( device_param[oldparam-1].CB_id ); - device_param[oldparam-1].CB_id = KNX_Empty; - } - - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_DELETE " CB #%d"), CBnum ); - AddLog(LOG_LEVEL_DEBUG); -} - - -bool KNX_CONFIG_NOT_MATCH() -{ - for (int i = 0; i < KNX_MAX_device_param; ++i) - { - if ( !device_param[i].show ) { // device has this parameter ? - // if not, search for all registered group address to this parameter for deletion - if ( KNX_GA_Search(i+1) != KNX_Empty ) { return true; } - if ( (i < 8) || (i > 15) ) // check relays and sensors (i from 8 to 16 are toggle relays parameters) - { - if ( KNX_CB_Search(i+1) != KNX_Empty ) { return true; } - if ( KNX_CB_Search(i+8) != KNX_Empty ) { return true; } - } - } - } - return false; -} - - -void KNXStart() -{ - knx.start(nullptr); - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_START)); - AddLog(LOG_LEVEL_DEBUG); -} - - -void KNX_INIT() -{ - // Check for incompatible config - if (Settings.knx_GA_registered > MAX_KNX_GA) { Settings.knx_GA_registered = MAX_KNX_GA; } - if (Settings.knx_CB_registered > MAX_KNX_CB) { Settings.knx_CB_registered = MAX_KNX_CB; } - - // Set Physical KNX Address of the device - KNX_physs_addr.value = Settings.knx_physsical_addr; - knx.physical_address_set( KNX_physs_addr ); - - // Read Configuration - // Check which relays, buttons and sensors where configured for this device - // and activate options according to the hardware - for (int i = GPIO_REL1; i < GPIO_REL8 + 1; ++i) - { - if (GetUsedInModule(i, my_module.gp.io)) { device_param[i - GPIO_REL1].show = true; } - } - for (int i = GPIO_REL1_INV; i < GPIO_REL8_INV + 1; ++i) - { - if (GetUsedInModule(i, my_module.gp.io)) { device_param[i - GPIO_REL1_INV].show = true; } - } - for (int i = GPIO_SWT1; i < GPIO_SWT4 + 1; ++i) - { - if (GetUsedInModule(i, my_module.gp.io)) { device_param[i - GPIO_SWT1 + 8].show = true; } - } - for (int i = GPIO_KEY1; i < GPIO_KEY4 + 1; ++i) - { - if (GetUsedInModule(i, my_module.gp.io)) { device_param[i - GPIO_KEY1 + 8].show = true; } - } - if (GetUsedInModule(GPIO_DHT11, my_module.gp.io)) { device_param[KNX_temperature-1].show = true; } - if (GetUsedInModule(GPIO_DHT22, my_module.gp.io)) { device_param[KNX_temperature-1].show = true; } - if (GetUsedInModule(GPIO_SI7021, my_module.gp.io)) { device_param[KNX_temperature-1].show = true; } - if (GetUsedInModule(GPIO_DHT11, my_module.gp.io)) { device_param[KNX_humidity-1].show = true; } - if (GetUsedInModule(GPIO_DHT22, my_module.gp.io)) { device_param[KNX_humidity-1].show = true; } - if (GetUsedInModule(GPIO_SI7021, my_module.gp.io)) { device_param[KNX_humidity-1].show = true; } - - // Delete from KNX settings all configuration is not anymore related to this device - if (KNX_CONFIG_NOT_MATCH()) { - Settings.knx_GA_registered = 0; - Settings.knx_CB_registered = 0; - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_DELETE " " D_KNX_PARAMETERS )); - AddLog(LOG_LEVEL_DEBUG); - } - - // Register Group Addresses to listen to - // Search on the settings if there is a group address set for receive KNX messages for the type: device_param[j].type - // If there is, register the group address on the KNX_IP Library to Receive data for Executing Callbacks - byte j; - for (byte i = 0; i < Settings.knx_CB_registered; ++i) - { - j = Settings.knx_CB_param[i]; - if ( j > 0 ) - { - device_param[j-1].CB_id = knx.callback_register("", KNX_CB_Action, &device_param[j-1]); // KNX IP Library requires a parameter - // to identify which action was requested on the KNX network - // to be performed on this device (set relay, etc.) - // Is going to be used device_param[j].type that stores the type number (1: relay 1, etc) - KNX_addr.value = Settings.knx_CB_addr[i]; - knx.callback_assign( device_param[j-1].CB_id, KNX_addr ); - } - } -} - - -void KNX_CB_Action(message_t const &msg, void *arg) -{ - device_parameters_t *chan = (device_parameters_t *)arg; - - if (!(Settings.flag.knx_enabled)) { return; } - - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_RECEIVED_FROM " %d.%d.%d " D_COMMAND " %s: %d " D_TO " %s"), - msg.received_on.ga.area, msg.received_on.ga.line, msg.received_on.ga.member, - (msg.ct == KNX_CT_WRITE) ? D_KNX_COMMAND_WRITE : (msg.ct == KNX_CT_READ) ? D_KNX_COMMAND_READ : D_KNX_COMMAND_OTHER, - msg.data[0], - device_param_cb[(chan->type)-1]); - AddLog(LOG_LEVEL_INFO); - - switch (msg.ct) - { - case KNX_CT_WRITE: - if (chan->type < 9) // Set Relays - { - ExecuteCommandPower(chan->type, msg.data[0]); - } - else if (chan->type < 17) // Toggle Relays - { - ExecuteCommandPower((chan->type) -8, 2); - } - break; - case KNX_CT_READ: - if (chan->type < 9) // reply Relays status - { - knx.answer_1bit(msg.received_on, chan->last_state); - } - else if (chan->type = KNX_temperature) // Reply Temperature - { - knx.answer_2byte_float(msg.received_on, last_temp); - } - else if (chan->type = KNX_humidity) // Reply Humidity - { - knx.answer_2byte_float(msg.received_on, last_hum); - } - break; - } -} - - -void KnxUpdatePowerState(byte device, power_t state) -{ - if (!(Settings.flag.knx_enabled)) { return; } - - device_param[device -1].last_state = bitRead(state, device -1); // power state (on/off) - - // Search all the registered GA that has that output (variable: device) as parameter - byte i = KNX_GA_Search(device); - while ( i != KNX_Empty ) { - KNX_addr.value = Settings.knx_GA_addr[i]; - knx.write_1bit(KNX_addr, device_param[device -1].last_state); - - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "%s = %d " D_SENT_TO " %d.%d.%d"), - device_param_ga[device -1], device_param[device -1].last_state, - KNX_addr.ga.area, KNX_addr.ga.line, KNX_addr.ga.member); - AddLog(LOG_LEVEL_INFO); - - i = KNX_GA_Search(device, i + 1); - } -} - - -void KnxSendButtonPower(byte key, byte device, byte state) -{ -// key 0 = button_topic -// key 1 = switch_topic -// state 0 = off -// state 1 = on -// state 2 = toggle -// state 3 = hold -// state 9 = clear retain flag - if (!(Settings.flag.knx_enabled)) { return; } -// if (key) -// { - -// Search all the registered GA that has that output (variable: device) as parameter - byte i = KNX_GA_Search(device + 8); - while ( i != KNX_Empty ) { - KNX_addr.value = Settings.knx_GA_addr[i]; - knx.write_1bit(KNX_addr, !(state == 0)); - - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "%s = %d " D_SENT_TO " %d.%d.%d"), - device_param_ga[device + 8], !(state == 0), - KNX_addr.ga.area, KNX_addr.ga.line, KNX_addr.ga.member); - AddLog(LOG_LEVEL_INFO); - - i = KNX_GA_Search(device + 8, i + 1); - } -// } -} - - -void KNX_Sensor(byte sensor_type, float value) -{ - if (sensor_type == KNX_temperature) - { - last_temp = value; - } else if (sensor_type == KNX_humidity) - { - last_hum = value; - } - - if (!(Settings.flag.knx_enabled)) { return; } - - byte i = KNX_GA_Search(sensor_type); - while ( i != KNX_Empty ) { - KNX_addr.value = Settings.knx_GA_addr[i]; - knx.write_2byte_float(KNX_addr, value); - - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "%s " D_SENT_TO " %d.%d.%d "), - device_param_ga[sensor_type], - KNX_addr.ga.area, KNX_addr.ga.line, KNX_addr.ga.member); - AddLog(LOG_LEVEL_INFO); - - i = KNX_GA_Search(sensor_type, i+1); - } -} - - -/*********************************************************************************************\ - * Presentation -\*********************************************************************************************/ - -#ifdef USE_WEBSERVER -const char S_CONFIGURE_KNX[] PROGMEM = D_CONFIGURE_KNX; - -const char HTTP_FORM_KNX[] PROGMEM = - "
 " D_KNX_PARAMETERS " 
" - "
" - "" D_KNX_PHYSICAL_ADDRESS " " - " . " - " . " - "" - "

" D_KNX_PHYSICAL_ADDRESS_NOTE "

" - "" D_KNX_ENABLE "

" - - "
" - "" D_KNX_GROUP_ADDRESS_TO_WRITE "
" - - " / " - " / " - " "; - -const char HTTP_FORM_KNX_ADD_BTN[] PROGMEM = - "

" - ""; - -const char HTTP_FORM_KNX_ADD_TABLE_ROW[] PROGMEM = - "" - ""; - -const char HTTP_FORM_KNX3[] PROGMEM = - "
{optex} -> GAfnum / GAarea / GAfdef

" - "
" - "" D_KNX_GROUP_ADDRESS_TO_READ "
"; - -const char HTTP_FORM_KNX4[] PROGMEM = - "-> -> "); - page += FPSTR(HTTP_FORM_KNX_GA); - page.replace(F("GAfnum"), F("GA_FNUM")); - page.replace(F("GAarea"), F("GA_AREA")); - page.replace(F("GAfdef"), F("GA_FDEF")); - page.replace(F("GAfnum"), F("GA_FNUM")); - page.replace(F("GAarea"), F("GA_AREA")); - page.replace(F("GAfdef"), F("GA_FDEF")); - page += FPSTR(HTTP_FORM_KNX_ADD_BTN); - page.replace(F("{btnval}"), String(1)); - if (Settings.knx_GA_registered < MAX_KNX_GA) { - page.replace(F("btndis"), F(" ")); - } - else - { - page.replace(F("btndis"), F("disabled")); - } - page.replace(F("fncbtnadd"), F("GAwarning")); - for (byte i = 0; i < Settings.knx_GA_registered ; ++i) - { - if ( Settings.knx_GA_param[i] ) - { - page += FPSTR(HTTP_FORM_KNX_ADD_TABLE_ROW); - page.replace(F("{opval}"), String(i+1)); - page.replace(F("{optex}"), String(device_param_ga[Settings.knx_GA_param[i]-1])); - KNX_addr.value = Settings.knx_GA_addr[i]; - page.replace(F("GAfnum"), String(KNX_addr.ga.area)); - page.replace(F("GAarea"), String(KNX_addr.ga.line)); - page.replace(F("GAfdef"), String(KNX_addr.ga.member)); - } - } - page += FPSTR(HTTP_FORM_KNX3); - page += FPSTR(HTTP_FORM_KNX_GA); - page.replace(F("GAfnum"), F("CB_FNUM")); - page.replace(F("GAarea"), F("CB_AREA")); - page.replace(F("GAfdef"), F("CB_FDEF")); - page.replace(F("GAfnum"), F("CB_FNUM")); - page.replace(F("GAarea"), F("CB_AREA")); - page.replace(F("GAfdef"), F("CB_FDEF")); - page += FPSTR(HTTP_FORM_KNX4); - for (byte i = 0; i < KNX_MAX_device_param ; i++) - { - if ( device_param[i].show ) - { - page += FPSTR(HTTP_FORM_KNX_OPT); - page.replace(F("{vop}"), String(device_param[i].type)); - page.replace(F("{nop}"), String(device_param_cb[i])); - } - } - page += F(" "); - page += FPSTR(HTTP_FORM_KNX_ADD_BTN); - page.replace(F("{btnval}"), String(2)); - if (Settings.knx_CB_registered < MAX_KNX_CB) { - page.replace(F("btndis"), F(" ")); - } - else - { - page.replace(F("btndis"), F("disabled")); - } - page.replace(F("fncbtnadd"), F("CBwarning")); - for (byte i = 0; i < Settings.knx_CB_registered ; ++i) - { - if ( Settings.knx_CB_param[i] ) - { - page += FPSTR(HTTP_FORM_KNX_ADD_TABLE_ROW2); - page.replace(F("{opval}"), String(i+1)); - page.replace(F("{optex}"), String(device_param_cb[Settings.knx_CB_param[i]-1])); - KNX_addr.value = Settings.knx_CB_addr[i]; - page.replace(F("GAfnum"), String(KNX_addr.ga.area)); - page.replace(F("GAarea"), String(KNX_addr.ga.line)); - page.replace(F("GAfdef"), String(KNX_addr.ga.member)); - } - } - page += F("
"); - page += F("
"); - page += FPSTR(HTTP_BTN_CONF); - - page.replace( F(""), - F("function GAwarning()" - "{" - "var GA_FNUM = document.getElementById('GA_FNUM');" - "var GA_AREA = document.getElementById('GA_AREA');" - "var GA_FDEF = document.getElementById('GA_FDEF');" - "if ( GA_FNUM != null && GA_FNUM.value == '0' && GA_AREA.value == '0' && GA_FDEF.value == '0' ) {" - "alert('" D_KNX_WARNING "');" - "}" - "}" - "function CBwarning()" - "{" - "var CB_FNUM = document.getElementById('CB_FNUM');" - "var CB_AREA = document.getElementById('CB_AREA');" - "var CB_FDEF = document.getElementById('CB_FDEF');" - "if ( CB_FNUM != null && CB_FNUM.value == '0' && CB_AREA.value == '0' && CB_FDEF.value == '0' ) {" - "alert('" D_KNX_WARNING "');" - "}" - "}" - "") ); - ShowPage(page); - } - -} - - -void KNX_Save_Settings() -{ - String stmp; - address_t KNX_addr; - byte i; - - Settings.flag.knx_enabled = WebServer->hasArg("b1"); - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_ENABLED ": %d "), - Settings.flag.knx_enabled); - AddLog(LOG_LEVEL_DEBUG); - - stmp = WebServer->arg("area"); - KNX_addr.pa.area = stmp.toInt(); - stmp = WebServer->arg("line"); - KNX_addr.pa.line = stmp.toInt(); - stmp = WebServer->arg("member"); - KNX_addr.pa.member = stmp.toInt(); - Settings.knx_physsical_addr = KNX_addr.value; - knx.physical_address_set( KNX_addr ); // Set Physical KNX Address of the device - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_KNX_PHYSICAL_ADDRESS ": %d.%d.%d "), - KNX_addr.pa.area, KNX_addr.pa.line, KNX_addr.pa.member ); - AddLog(LOG_LEVEL_DEBUG); - - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "GA: %d"), - Settings.knx_GA_registered ); - AddLog(LOG_LEVEL_DEBUG); - for (i = 0; i < Settings.knx_GA_registered ; ++i) - { - KNX_addr.value = Settings.knx_GA_addr[i]; - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "GA #%d: %s " D_TO " %d/%d/%d"), - i+1, device_param_ga[Settings.knx_GA_param[i]-1], - KNX_addr.ga.area, KNX_addr.ga.line, KNX_addr.ga.member ); - AddLog(LOG_LEVEL_DEBUG); - } - - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "CB: %d"), - Settings.knx_CB_registered ); - AddLog(LOG_LEVEL_DEBUG); - for (i = 0; i < Settings.knx_CB_registered ; ++i) - { - KNX_addr.value = Settings.knx_CB_addr[i]; - snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "CB #%d: %d/%d/%d " D_TO " %s"), - i+1, - KNX_addr.ga.area, KNX_addr.ga.line, KNX_addr.ga.member, - device_param_cb[Settings.knx_CB_param[i]-1] ); - AddLog(LOG_LEVEL_DEBUG); - } -} - -#endif // USE_WEBSERVER - - -/*********************************************************************************************\ - * Interface -\*********************************************************************************************/ - -#define XDRV_11 - -boolean Xdrv11(byte function) -{ - boolean result = false; - switch (function) { - case FUNC_INIT: - KNX_INIT(); - break; - case FUNC_LOOP: - knx.loop(); // Process knx events - // It is not used by the actual config of asyncUDP branch of ESP-KNX-IP Library, - // but is left here for compatibility with upcoming features of ESP-KNX-IP Library - break; -// case FUNC_COMMAND: -// result = KNXCommand(); -// break; -// case FUNC_SET_POWER: -// break; - } - return result; -} - -#endif // USE_KNX