Update changelog

BUILDS.md

@@ -3,6 +3,7 @@
 | Feature or Sensor     | minimal | lite | tasmota | knx | sensors | ir | display | Remarks
 |-----------------------|---------|-------|--------|-----|---------|----|---------|--------
 | MY_LANGUAGE en_GB     | x | x | x | x | x | x | x |
+| USE_UFILESYS          | - | - | - | - | - | - | - |
 | USE_ARDUINO_OTA       | - | - | - | - | - | - | - |
 | USE_DOMOTICZ          | - | - | x | x | x | x | - |
 | USE_HOME_ASSISTANT    | - | - | x | x | x | x | - |
@@ -49,7 +50,7 @@
 | USE_PWM_DIMMER        | - | - | x | x | - | - | - |
 | USE_KEELOQ            | - | - | - | - | - | - | - |
 | USE_SONOFF_D1         | - | - | x | x | - | - | - |
-| USE_SHELLY_DIMMER     | - | - | - | - | - | - | - |
+| USE_SHELLY_DIMMER     | - | - | x | - | - | - | - |
 |                       |   |   |   |   |   |   |   |
 | Feature or Sensor     | minimal | lite | tasmota | knx | sensors | ir | display | Remarks
 | USE_LIGHT             | - | x | x | x | x | x | x |
@@ -147,6 +148,7 @@
 | USE_EZOPRS            | - | - | - | - | - | - | - |
 | USE_EZORGB            | - | - | - | - | - | - | - |
 | USE_EZORTD            | - | - | - | - | - | - | - |
+| USE_SEESAW_SOIL       | - | - | - | - | - | - | - |
 |                       |   |   |   |   |   |   |   |
 | Feature or Sensor     | minimal | lite | tasmota | knx | sensors | ir | display | Remarks
 | USE_SPI               | - | - | - | - | - | - | x |
@@ -205,14 +207,19 @@
 | USE_DISPLAY_SSD1351   | - | - | - | - | - | - | x |
 | USE_DISPLAY_RA8876    | - | - | - | - | - | - | x |
 | USE_DISPLAY_ST7789    | - | - | - | - | - | - | x |
+|                       |   |   |   |   |   |   |   |
+| USE_FT5206            | - | - | - | - | - | - | - |
+| USE_FTC532            | - | - | - | - | - | - | - |
+| USE_BS814A2           | - | - | - | - | - | - | - |
 
 ## Additional Features and Sensors on ESP32
 
-| Feature or Sensor     | minimal | lite | tasmota | knx | sensors | ir | display | webcam | Remarks
+| Feature or Sensor     | lite | tasmota | knx | sensors | ir | display | webcam | Remarks
 |-----------------------|---------|-------|--------|-----|---------|----|---------|--------|--------
-| USE_MI_ESP32          | - | - | X | - | X | - | - | - | See SetOption115
+| USE_UFILESYS          | x | x | x | x | x | x | x |
-| USE_IBEACON_ESP32     | - | - | - | - | - | - | - | - |
+| USE_MI_ESP32          | - | x | - | x | - | - | - | See SetOption115
-| USE_WEBCAM            | - | - | - | - | - | - | - | x |
+| USE_IBEACON_ESP32     | - | - | - | - | - | - | - |
-| USE_ETHERNET          | - | - | - | - | - | - | - | - |
+| USE_WEBCAM            | - | - | - | - | - | - | x |
-| USE_I2S_AUDIO         | - | - | - | - | - | - | - | - |
+| USE_ETHERNET          | - | - | - | - | - | - | - |
-| USE_TTGO_WATCH        | - | - | - | - | - | - | - | - |
+| USE_I2S_AUDIO         | - | - | - | - | - | - | - |
+| USE_TTGO_WATCH        | - | - | - | - | - | - | - |

CHANGELOG.md

@@ -7,8 +7,9 @@ All notable changes to this project will be documented in this file.
 ### Added
 - Support for time proportioned (``#define USE_TIMEPROP``) and optional PID (``#define USE_PID``) relay control (#10412)
 - Support rotary encoder on Shelly Dimmer (#10407)
-- Command ``SetOption43 1..100`` to control Rotary step (#10407)
+- Command ``SetOption43 1..255`` to control Rotary step (#10407)
-- Zigbee debounce duplicate commands received from the same device within ``USE_ZIGBEE_DEBOUNCE_COMMANDS`` milliseconds
+- Support for BS814A-2 8-button touch buttons by Peter Franck (#10447)
+- Support for up to 4 I2C SEESAW_SOIL Capacitance & Temperature sensors by Peter Franck (#10481)
 
 ### Breaking Changed
 - ESP32 switch from default SPIFFS to default LittleFS file system loosing current (zigbee) files

RELEASENOTES.md

@@ -61,7 +61,7 @@ The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota
 - Command ``CTRange`` to specify the visible CT range the bulb is capable of [#10311](https://github.com/arendst/Tasmota/issues/10311)
 - Command ``RuleTimer0`` to access all RuleTimers at once [#10352](https://github.com/arendst/Tasmota/issues/10352)
 - Command ``VirtualCT`` to simulate or fine tune CT bulbs with 3,4,5 channels [#10311](https://github.com/arendst/Tasmota/issues/10311)
-- Command ``SetOption43 1..100`` to control Rotary step (#10407)
+- Command ``SetOption43 1..255`` to control Rotary step (#10407)
 - Command ``SetOption118 1`` to move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default [#10353](https://github.com/arendst/Tasmota/issues/10353)
 - Command ``SetOption119 1`` to remove the device addr from json payload, can be used with zb_topic_fname where the addr is already known from the topic [#10355](https://github.com/arendst/Tasmota/issues/10355)
 - Milliseconds to console output [#10152](https://github.com/arendst/Tasmota/issues/10152)
@@ -71,13 +71,15 @@ The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota
 - Support for P9813 RGB Led MOSFET controller [#10104](https://github.com/arendst/Tasmota/issues/10104)
 - Support for GPIO option selection
 - Support for FTC532 8-button touch controller by Peter Franck [#10222](https://github.com/arendst/Tasmota/issues/10222)
-- Support character `#` to be replaced by `space`-character in command ``Publish`` topic [#10258](https://github.com/arendst/Tasmota/issues/10258)
+- Support for BS814A-2 8-button touch buttons by Peter Franck [#10447](https://github.com/arendst/Tasmota/issues/10447)
+- Support for up to 4 I2C SEESAW_SOIL Capacitance & Temperature sensors by Peter Franck [#10481](https://github.com/arendst/Tasmota/issues/10481)
 - Support for Afrikaans language translations by Christiaan Heerze
 - Support for IR inverted leds using ``#define IR_SEND_INVERTED true`` [#10301](https://github.com/arendst/Tasmota/issues/10301)
 - Support for disabling 38kHz IR modulation using ``#define IR_SEND_USE_MODULATION false`` [#10301](https://github.com/arendst/Tasmota/issues/10301)
 - Support for SPI display driver for ST7789 TFT by Gerhard Mutz [#9037](https://github.com/arendst/Tasmota/issues/9037)
 - Support for time proportioned (``#define USE_TIMEPROP``) and optional PID (``#define USE_PID``) relay control [#10412](https://github.com/arendst/Tasmota/issues/10412)
 - Support rotary encoder on Shelly Dimmer [#10407](https://github.com/arendst/Tasmota/issues/10407#issuecomment-756240920)
+- Support character `#` to be replaced by `space`-character in command ``Publish`` topic [#10258](https://github.com/arendst/Tasmota/issues/10258)
 - Basic support for ESP32 Odroid Go 16MB binary tasmota32-odroidgo.bin [#8630](https://github.com/arendst/Tasmota/issues/8630)
 - SPI display driver SSD1331 Color oled by Jeroen Vermeulen [#10376](https://github.com/arendst/Tasmota/issues/10376)
 

tasmota/support_features.ino

@@ -701,7 +701,9 @@ void ResponseAppendFeatures(void)
 #ifdef USE_BS814A2
     feature7 |= 0x01000000;  // xdrv_51_bs814a2.ino
 #endif
-//    feature7 |= 0x02000000;
+#ifdef USE_SEESAW_SOIL
+    feature7 |= 0x02000000;  // xsns_81_seesaw_soil.ino
+#endif
 //    feature7 |= 0x04000000;
 //    feature7 |= 0x08000000;
 

tools/decode-status.py

@@ -94,7 +94,7 @@ a_setoption = [[
     "(Button) Ignore hold time (s)",
     "(Wifi) Gratuitous ARP repeat time",
     "(Temperature) Over temperature threshold (celsius)",
-    "(not used) Tuya MCU max dimmer value",
+    "(Rotary) Max allowed steps",
     "(not used) Tuya MCU voltage Id",
     "(not used) Tuya MCU current Id",
     "(not used) Tuya MCU power Id",
@@ -244,7 +244,7 @@ a_features = [[
     "USE_SHELLY_DIMMER","USE_RC522","USE_FTC532","USE_DISPLAY_EPAPER_42",
     "USE_DISPLAY_ILI9488","USE_DISPLAY_SSD1351","USE_DISPLAY_RA8876","USE_DISPLAY_ST7789",
     "USE_DISPLAY_SSD1331","USE_UFILESYS","USE_TIMEPROP","USE_PID",
-    "","","","",
+    "USE_BS814A2","USE_SEESAW_SOIL","","",
     "","","",""
     ]]
 
@@ -273,7 +273,7 @@ else:
         obj = json.load(fp)
 
 def StartDecode():
-    print ("\n*** decode-status.py v20210106 by Theo Arends and Jacek Ziolkowski ***")
+    print ("\n*** decode-status.py v20210111 by Theo Arends and Jacek Ziolkowski ***")
 
 #    print("Decoding\n{}".format(obj))