diff --git a/tasmota/Arduino.h b/tasmota/Arduino.h
deleted file mode 100644
index 2dd8b22e2..000000000
--- a/tasmota/Arduino.h
+++ /dev/null
@@ -1,493 +0,0 @@
-/*
- Arduino.h - Main include file for the Arduino SDK
- Copyright (c) 2005-2013 Arduino Team.  All right reserved.
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with this library; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#ifdef ESP8266
-
-#ifndef Arduino_h
-#define Arduino_h
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <stdlib.h>
-#include <stdint.h>
-#include <stdbool.h>
-#include <stddef.h>
-#include <stdarg.h>
-#include <stdio.h>
-#include <string.h>
-#include <math.h>
-
-#include "stdlib_noniso.h"
-#include "binary.h"
-#include "esp8266_peri.h"
-#include "twi.h"
-#include "core_esp8266_features.h"
-#include "core_esp8266_version.h"
-
-#define HIGH 0x1
-#define LOW  0x0
-
-#define PWMRANGE 1023
-
-//GPIO FUNCTIONS
-#define INPUT             0x00
-#define INPUT_PULLUP      0x02
-#define INPUT_PULLDOWN_16 0x04 // PULLDOWN only possible for pin16
-#define OUTPUT            0x01
-#define OUTPUT_OPEN_DRAIN 0x03
-#define WAKEUP_PULLUP     0x05
-#define WAKEUP_PULLDOWN   0x07
-#define SPECIAL           0xF8 //defaults to the usable BUSes uart0rx/tx uart1tx and hspi
-#define FUNCTION_0        0x08
-#define FUNCTION_1        0x18
-#define FUNCTION_2        0x28
-#define FUNCTION_3        0x38
-#define FUNCTION_4        0x48
-
-#define PI 3.1415926535897932384626433832795
-#define HALF_PI 1.5707963267948966192313216916398
-#define TWO_PI 6.283185307179586476925286766559
-#define DEG_TO_RAD 0.017453292519943295769236907684886
-#define RAD_TO_DEG 57.295779513082320876798154814105
-#define EULER 2.718281828459045235360287471352
-
-#define SERIAL  0x0
-#define DISPLAY 0x1
-
-#define LSBFIRST 0
-#define MSBFIRST 1
-
-//Interrupt Modes
-#define RISING    0x01
-#define FALLING   0x02
-#define CHANGE    0x03
-#define ONLOW     0x04
-#define ONHIGH    0x05
-#define ONLOW_WE  0x0C
-#define ONHIGH_WE 0x0D
-
-#define DEFAULT 1
-#define EXTERNAL 0
-
-//timer dividers
-enum TIM_DIV_ENUM {
-  TIM_DIV1 = 0,   //80MHz (80 ticks/us - 104857.588 us max)
-  TIM_DIV16 = 1,  //5MHz (5 ticks/us - 1677721.4 us max)
-  TIM_DIV256 = 3 //312.5Khz (1 tick = 3.2us - 26843542.4 us max)
-};
-
-
-//timer int_types
-#define TIM_EDGE	0
-#define TIM_LEVEL	1
-//timer reload values
-#define TIM_SINGLE	0 //on interrupt routine you need to write a new value to start the timer again
-#define TIM_LOOP	1 //on interrupt the counter will start with the same value again
-
-#define timer1_read()           (T1V)
-#define timer1_enabled()        ((T1C & (1 << TCTE)) != 0)
-#define timer1_interrupted()    ((T1C & (1 << TCIS)) != 0)
-
-typedef void(*timercallback)(void);
-
-void timer1_isr_init(void);
-void timer1_enable(uint8_t divider, uint8_t int_type, uint8_t reload);
-void timer1_disable(void);
-void timer1_attachInterrupt(timercallback userFunc);
-void timer1_detachInterrupt(void);
-void timer1_write(uint32_t ticks); //maximum ticks 8388607
-
-// timer0 is a special CPU timer that has very high resolution but with
-// limited control.
-// it uses CCOUNT (ESP.GetCycleCount()) as the non-resetable timer counter
-// it does not support divide, type, or reload flags
-// it is auto-disabled when the compare value matches CCOUNT
-// it is auto-enabled when the compare value changes
-#define timer0_interrupted()    (ETS_INTR_PENDING() & (_BV(ETS_COMPARE0_INUM)))
-#define timer0_read() ((__extension__({uint32_t count;__asm__ __volatile__("esync; rsr %0,ccompare0":"=a" (count));count;})))
-#define timer0_write(count) __asm__ __volatile__("wsr %0,ccompare0; esync"::"a" (count) : "memory")
-
-void timer0_isr_init(void);
-void timer0_attachInterrupt(timercallback userFunc);
-void timer0_detachInterrupt(void);
-
-// Use stdlib abs() and round() to avoid issues with the C++ libraries
-#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
-#define radians(deg) ((deg)*DEG_TO_RAD)
-#define degrees(rad) ((rad)*RAD_TO_DEG)
-#define sq(x) ((x)*(x))
-
-void ets_intr_lock();
-void ets_intr_unlock();
-
-#define interrupts() xt_rsil(0)
-#define noInterrupts() xt_rsil(15)
-
-#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
-#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() )
-#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() )
-
-#define lowByte(w) ((uint8_t) ((w) & 0xff))
-#define highByte(w) ((uint8_t) ((w) >> 8))
-
-#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
-#define bitSet(value, bit) ((value) |= (1UL << (bit)))
-#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
-#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
-
-// avr-libc defines _NOP() since 1.6.2
-#ifndef _NOP
-#define _NOP() do { __asm__ volatile ("nop"); } while (0)
-#endif
-
-typedef uint16_t word;
-
-#define bit(b) (1UL << (b))
-#define _BV(b) (1UL << (b))
-
-typedef bool boolean;
-typedef uint8_t byte;
-
-void init(void);
-void initVariant(void);
-
-int atexit(void (*func)()) __attribute__((weak));
-
-void pinMode(uint8_t pin, uint8_t mode);
-void digitalWrite(uint8_t pin, uint8_t val);
-int digitalRead(uint8_t pin);
-int analogRead(uint8_t pin);
-void analogReference(uint8_t mode);
-void analogWrite(uint8_t pin, int val);
-void analogWriteCCyPeriod(uint8_t pin, int val, uint32_t period);
-void analogWriteFreq(uint32_t freq);
-void analogWriteRange(uint32_t range);
-
-unsigned long millis(void);
-unsigned long micros(void);
-uint64_t micros64(void);
-void delay(unsigned long);
-void delayMicroseconds(unsigned int us);
-unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout);
-unsigned long pulseInLong(uint8_t pin, uint8_t state, unsigned long timeout);
-
-void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val);
-uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder);
-
-void attachInterrupt(uint8_t pin, void (*)(void), int mode);
-void detachInterrupt(uint8_t pin);
-void attachInterruptArg(uint8_t pin, void (*)(void*), void* arg, int mode);
-
-void preinit(void);
-void setup(void);
-void loop(void);
-
-void yield(void);
-
-void optimistic_yield(uint32_t interval_us);
-
-#define _PORT_GPIO16    1
-#define digitalPinToPort(pin)       (((pin)==16)?(_PORT_GPIO16):(0))
-#define digitalPinToBitMask(pin)    (((pin)==16)?(1):(1UL << (pin)))
-#define digitalPinToTimer(pin)      (0)
-#define portOutputRegister(port)    (((port)==_PORT_GPIO16)?((volatile uint32_t*) &GP16O):((volatile uint32_t*) &GPO))
-#define portInputRegister(port)     (((port)==_PORT_GPIO16)?((volatile uint32_t*) &GP16I):((volatile uint32_t*) &GPI))
-#define portModeRegister(port)      (((port)==_PORT_GPIO16)?((volatile uint32_t*) &GP16E):((volatile uint32_t*) &GPE))
-
-#define NOT_A_PIN -1
-#define NOT_A_PORT -1
-#define NOT_AN_INTERRUPT -1
-#define NOT_ON_TIMER 0
-
-#ifdef __cplusplus
-} // extern "C"
-#endif
-
-
-//for compatibility, below 4 lines to be removed in release 3.0.0
-#ifdef __cplusplus
-extern "C"
-#endif
-const int TIM_DIV265 __attribute__((deprecated, weak)) = TIM_DIV256;
-
-
-
-#ifdef __cplusplus
-
-#include <algorithm>
-#include <cmath>
-#include <pgmspace.h>
-
-#include "WCharacter.h"
-#include "WString.h"
-
-#include "HardwareSerial.h"
-#include "Esp.h"
-#include "Updater.h"
-#include "debug.h"
-
-using std::min;
-using std::max;
-using std::round;
-using std::isinf;
-using std::isnan;
-
-#define _min(a,b) ({ decltype(a) _a = (a); decltype(b) _b = (b); _a < _b? _a : _b; })
-#define _max(a,b) ({ decltype(a) _a = (a); decltype(b) _b = (b); _a > _b? _a : _b; })
-
-uint16_t makeWord(uint16_t w);
-uint16_t makeWord(byte h, byte l);
-
-#define word(...) makeWord(__VA_ARGS__)
-
-unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L);
-unsigned long pulseInLong(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L);
-
-void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0);
-void tone(uint8_t _pin, int frequency, unsigned long duration = 0);
-void tone(uint8_t _pin, double frequency, unsigned long duration = 0);
-void noTone(uint8_t _pin);
-
-// WMath prototypes
-long random(long);
-long random(long, long);
-void randomSeed(unsigned long);
-long secureRandom(long);
-long secureRandom(long, long);
-long map(long, long, long, long, long);
-
-void setTZ(const char* tz);
-
-void configTime(int timezone, int daylightOffset_sec, const char* server1,
-    const char* server2 = nullptr, const char* server3 = nullptr);
-
-void configTime(const char* tz, const char* server1,
-    const char* server2 = nullptr, const char* server3 = nullptr);
-
-// esp32 api compatibility
-inline void configTzTime(const char* tz, const char* server1,
-    const char* server2 = nullptr, const char* server3 = nullptr)
-{
-    configTime(tz, server1, server2, server3);
-}
-
-#endif // __cplusplus
-
-#include "pins_arduino.h"
-
-#endif
-
-#ifdef DEBUG_ESP_OOM
-// reinclude *alloc redefinition because of <cstdlib> undefining them
-// this is mandatory for allowing OOM *alloc definitions in .ino files
-#include "umm_malloc/umm_malloc_cfg.h"
-#endif
-
-#else
-
-/*
- Arduino.h - Main include file for the Arduino SDK
- Copyright (c) 2005-2013 Arduino Team.  All right reserved.
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with this library; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef Arduino_h
-#define Arduino_h
-
-#include <stdbool.h>
-#include <stdint.h>
-#include <stdarg.h>
-#include <stddef.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <inttypes.h>
-
-#include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
-#include "freertos/semphr.h"
-#include "esp32-hal.h"
-#include "esp8266-compat.h"
-#include "soc/gpio_reg.h"
-
-#include "stdlib_noniso.h"
-#include "binary.h"
-
-#define PI 3.1415926535897932384626433832795
-#define HALF_PI 1.5707963267948966192313216916398
-#define TWO_PI 6.283185307179586476925286766559
-#define DEG_TO_RAD 0.017453292519943295769236907684886
-#define RAD_TO_DEG 57.295779513082320876798154814105
-#define EULER 2.718281828459045235360287471352
-
-#define SERIAL  0x0
-#define DISPLAY 0x1
-
-#define LSBFIRST 0
-#define MSBFIRST 1
-
-//Interrupt Modes
-#define RISING    0x01
-#define FALLING   0x02
-#define CHANGE    0x03
-#define ONLOW     0x04
-#define ONHIGH    0x05
-#define ONLOW_WE  0x0C
-#define ONHIGH_WE 0x0D
-
-#define DEFAULT 1
-#define EXTERNAL 0
-
-#ifndef __STRINGIFY
-#define __STRINGIFY(a) #a
-#endif
-
-#define constrain(amt,low,high) ((amt)<(low)?(low):((amt)>(high)?(high):(amt)))
-#define radians(deg) ((deg)*DEG_TO_RAD)
-#define degrees(rad) ((rad)*RAD_TO_DEG)
-#define sq(x) ((x)*(x))
-
-#define sei()
-#define cli()
-#define interrupts() sei()
-#define noInterrupts() cli()
-
-#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
-#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() )
-#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() )
-
-#define lowByte(w) ((uint8_t) ((w) & 0xff))
-#define highByte(w) ((uint8_t) ((w) >> 8))
-
-#define bitRead(value, bit) (((value) >> (bit)) & 0x01)
-#define bitSet(value, bit) ((value) |= (1UL << (bit)))
-#define bitClear(value, bit) ((value) &= ~(1UL << (bit)))
-#define bitWrite(value, bit, bitvalue) (bitvalue ? bitSet(value, bit) : bitClear(value, bit))
-
-// avr-libc defines _NOP() since 1.6.2
-#ifndef _NOP
-#define _NOP() do { __asm__ volatile ("nop"); } while (0)
-#endif
-
-#define bit(b) (1UL << (b))
-#define _BV(b) (1UL << (b))
-
-#define digitalPinToPort(pin)       (((pin)>31)?1:0)
-#define digitalPinToBitMask(pin)    (1UL << (((pin)>31)?((pin)-32):(pin)))
-#define digitalPinToTimer(pin)      (0)
-#define analogInPinToBit(P)         (P)
-#define portOutputRegister(port)    ((volatile uint32_t*)((port)?GPIO_OUT1_REG:GPIO_OUT_REG))
-#define portInputRegister(port)     ((volatile uint32_t*)((port)?GPIO_IN1_REG:GPIO_IN_REG))
-#define portModeRegister(port)      ((volatile uint32_t*)((port)?GPIO_ENABLE1_REG:GPIO_ENABLE_REG))
-
-#define NOT_A_PIN -1
-#define NOT_A_PORT -1
-#define NOT_AN_INTERRUPT -1
-#define NOT_ON_TIMER 0
-
-typedef bool boolean;
-typedef uint8_t byte;
-typedef unsigned int word;
-
-void setup(void);
-void loop(void);
-
-long random(long, long);
-void randomSeed(unsigned long);
-long map(long, long, long, long, long);
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-void init(void);
-void initVariant(void);
-void initArduino(void);
-
-unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout);
-unsigned long pulseInLong(uint8_t pin, uint8_t state, unsigned long timeout);
-
-uint8_t shiftIn(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder);
-void shiftOut(uint8_t dataPin, uint8_t clockPin, uint8_t bitOrder, uint8_t val);
-
-#ifdef __cplusplus
-}
-
-#include <algorithm>
-#include <cmath>
-
-#include "WCharacter.h"
-#include "WString.h"
-#include "Stream.h"
-#include "Printable.h"
-#include "Print.h"
-#include "IPAddress.h"
-#include "Client.h"
-#include "Server.h"
-#include "Udp.h"
-#include "HardwareSerial.h"
-#include "Esp.h"
-
-using std::abs;
-using std::isinf;
-using std::isnan;
-using std::max;
-using std::min;
-using ::round;
-
-uint16_t makeWord(uint16_t w);
-uint16_t makeWord(byte h, byte l);
-
-#define word(...) makeWord(__VA_ARGS__)
-
-unsigned long pulseIn(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L);
-unsigned long pulseInLong(uint8_t pin, uint8_t state, unsigned long timeout = 1000000L);
-
-extern "C" bool getLocalTime(struct tm * info, uint32_t ms = 5000);
-extern "C" void configTime(long gmtOffset_sec, int daylightOffset_sec,
-        const char* server1, const char* server2 = nullptr, const char* server3 = nullptr);
-extern "C" void configTzTime(const char* tz,
-        const char* server1, const char* server2 = nullptr, const char* server3 = nullptr);
-
-// WMath prototypes
-long random(long);
-#endif /* __cplusplus */
-
-#define _min(a,b) ((a)<(b)?(a):(b))
-#define _max(a,b) ((a)>(b)?(a):(b))
-
-#include "pins_arduino.h"
-
-#endif /* _ESP32_CORE_ARDUINO_H_ */
-
-#endif