Bump version v13.4.0.4

- Add command ``PowerLock`` to disable power control of selected outputs (#21081)

CHANGELOG.md

@@ -3,7 +3,19 @@ All notable changes to this project will be documented in this file.
 
 ## [Unreleased] - Development
 
-## [13.4.0.3]
+## [13.4.0.4]
+### Added
+- Command ``PowerLock`` to disable power control of selected outputs (#21081)
+
+### Breaking Changed
+
+### Changed
+
+### Fixed
+
+### Removed
+
+## [13.4.0.3] 20240402
 ### Added
 - Zigbee support for attributes of type `uint48` used by energy monitoring (#20992)
 - Support for single channel EU863-870 LoRaWanBridge (#17790)

RELEASENOTES.md

@@ -116,8 +116,9 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm
 
 [Complete list](BUILDS.md) of available feature and sensors.
 
-## Changelog v13.4.0.3
+## Changelog v13.4.0.4
 ### Added
+- Command ``PowerLock`` to disable power control of selected outputs [#21081](https://github.com/arendst/Tasmota/issues/21081)
 - Support for calculated heat index if temperature and humidity is available with ``#define USE_HEAT_INDEX`` [#4771](https://github.com/arendst/Tasmota/issues/4771)
 - Support for LoRa and single channel EU863-870 LoRaWanBridge [#17790](https://github.com/arendst/Tasmota/issues/17790)
 - Support for AMS5915/AMS6915 temperature and pressure sensors [#20814](https://github.com/arendst/Tasmota/issues/20814)

tasmota/include/i18n.h

@@ -286,6 +286,7 @@
 #define D_CMND_STATE "State"
 #define D_CMND_POWER "Power"
 #define D_CMND_TIMEDPOWER "TimedPower"
+#define D_CMND_POWERLOCK "PowerLock"
 #define D_CMND_FANSPEED "FanSpeed"
 #define D_CMND_POWERONSTATE "PowerOnState"
 #define D_CMND_PULSETIME "PulseTime"

tasmota/include/tasmota_types.h

@@ -857,9 +857,7 @@ typedef struct {
   uint16_t      flowratemeter_calibration[2];// F78
   int32_t       energy_kWhexport_ph[3];    // F7C
   uint32_t      eth_ipv4_address[5];       // F88
-
+  uint32_t      power_lock;                // F9C
-  uint32_t      ex_energy_kWhtotal;        // F9C
-
   SBitfield1    sbflag1;                   // FA0
   TeleinfoCfg   teleinfo;                  // FA4
   uint64_t      rf_protocol_mask;          // FA8

tasmota/include/tasmota_version.h

@@ -22,6 +22,6 @@
 
 #define TASMOTA_SHA_SHORT                      // Filled by Github sed
 
-const uint32_t TASMOTA_VERSION = 0x0D040003;   // 13.4.0.3
+const uint32_t TASMOTA_VERSION = 0x0D040004;   // 13.4.0.4
 
 #endif  // _TASMOTA_VERSION_H_

tasmota/tasmota_support/settings.ino

@@ -46,7 +46,7 @@ void RtcSettingsSave(void) {
       memset(&RtcSettings, 0, sizeof(RtcSettings));
       RtcSettings.valid = RTC_MEM_VALID;
 //      RtcSettings.ex_energy_kWhtoday = Settings->energy_power_calibration2;  // = ex_energy_kWhtoday
-//      RtcSettings.ex_energy_kWhtotal = Settings->ex_energy_kWhtotal;
+//      RtcSettings.ex_energy_kWhtotal = Settings->power_lock;
       for (uint32_t i = 0; i < 3; i++) {
         RtcSettings.energy_kWhtoday_ph[i] = Settings->energy_kWhtoday_ph[i];
         RtcSettings.energy_kWhtotal_ph[i] = Settings->energy_kWhtotal_ph[i];
@@ -1639,7 +1639,7 @@ void SettingsDelta(void) {
       memset(&Settings->sensors, 0xFF, 16);  // Enable all possible sensors
     }
     if (Settings->version < 0x09050004) {
-      Settings->ex_energy_kWhtotal = Settings->ipv4_address[4];
+      Settings->power_lock = Settings->ipv4_address[4];
       ParseIPv4(&Settings->ipv4_address[4], PSTR(WIFI_DNS2));
     }
     if (Settings->version < 0x09050005) {
@@ -1664,7 +1664,7 @@ void SettingsDelta(void) {
     if (Settings->version < 0x09050009) {  // 9.5.0.9
       memset(&Settings->energy_kWhtoday_ph, 0, 36);
       memset(&RtcSettings.energy_kWhtoday_ph, 0, 24);
-      Settings->energy_kWhtotal_ph[0] = Settings->ex_energy_kWhtotal;
+      Settings->energy_kWhtotal_ph[0] = Settings->power_lock;
       Settings->energy_kWhtoday_ph[0] = Settings->energy_power_calibration2;  // = ex_energy_kWhtoday
       Settings->energy_kWhyesterday_ph[0] = Settings->energy_voltage_calibration2;  // = ex_energy_kWhyesterday
       RtcSettings.energy_kWhtoday_ph[0] = RtcSettings.ex_energy_kWhtoday;
@@ -1773,6 +1773,9 @@ void SettingsDelta(void) {
     }
 #endif
 */
+    if (Settings->version < 0x0D040004) {  // 13.4.0.4
+      Settings->power_lock = 0;
+    }
 
     Settings->version = TASMOTA_VERSION;
     SettingsSave(1);

tasmota/tasmota_support/support_command.ino

@@ -23,7 +23,7 @@ const char kTasmotaCommands[] PROGMEM = "|"  // No prefix
   // Other commands
   D_CMND_UPGRADE "|" D_CMND_UPLOAD "|" D_CMND_OTAURL "|" D_CMND_SERIALLOG "|" D_CMND_RESTART "|"
 #ifndef FIRMWARE_MINIMAL_ONLY
-  D_CMND_BACKLOG "|" D_CMND_DELAY "|" D_CMND_POWER "|" D_CMND_TIMEDPOWER "|" D_CMND_STATUS "|" D_CMND_STATE "|" D_CMND_SLEEP "|"
+  D_CMND_BACKLOG "|" D_CMND_DELAY "|" D_CMND_POWER "|" D_CMND_POWERLOCK "|" D_CMND_TIMEDPOWER "|" D_CMND_STATUS "|" D_CMND_STATE "|" D_CMND_SLEEP "|"
   D_CMND_POWERONSTATE "|" D_CMND_PULSETIME "|" D_CMND_BLINKTIME "|" D_CMND_BLINKCOUNT "|" D_CMND_SAVEDATA "|"
   D_CMND_SO "|" D_CMND_SETOPTION "|" D_CMND_TEMPERATURE_RESOLUTION "|" D_CMND_HUMIDITY_RESOLUTION "|" D_CMND_PRESSURE_RESOLUTION "|" D_CMND_POWER_RESOLUTION "|"
   D_CMND_VOLTAGE_RESOLUTION "|" D_CMND_FREQUENCY_RESOLUTION "|" D_CMND_CURRENT_RESOLUTION "|" D_CMND_ENERGY_RESOLUTION "|" D_CMND_WEIGHT_RESOLUTION "|"
@@ -63,7 +63,7 @@ SO_SYNONYMS(kTasmotaSynonyms,
 void (* const TasmotaCommand[])(void) PROGMEM = {
   &CmndUpgrade, &CmndUpgrade, &CmndOtaUrl, &CmndSeriallog, &CmndRestart,
 #ifndef FIRMWARE_MINIMAL_ONLY
-  &CmndBacklog, &CmndDelay, &CmndPower, &CmndTimedPower, &CmndStatus, &CmndState, &CmndSleep,
+  &CmndBacklog, &CmndDelay, &CmndPower, &CmndPowerLock, &CmndTimedPower, &CmndStatus, &CmndState, &CmndSleep,
   &CmndPowerOnState, &CmndPulsetime, &CmndBlinktime, &CmndBlinkcount, &CmndSavedata,
   &CmndSetoption, &CmndSetoption, &CmndTemperatureResolution, &CmndHumidityResolution, &CmndPressureResolution, &CmndPowerResolution,
   &CmndVoltageResolution, &CmndFrequencyResolution, &CmndCurrentResolution, &CmndEnergyResolution, &CmndWeightResolution,
@@ -658,6 +658,26 @@ void CmndPower(void)
   }
 }
 
+void CmndPowerLock(void) {
+  // PowerLock    - Show current state
+  // PowerLock0 0 - Reset all power locks
+  // PowerLock0 1 - Set all power locks
+  // PowerLock1 1 - Set Power1 lock
+  if (XdrvMailbox.index <= TasmotaGlobal.devices_present) {
+    if (XdrvMailbox.payload >= 0) {
+      XdrvMailbox.payload &= 1;
+      if (0 == XdrvMailbox.index) {  // Control all bits
+        Settings->power_lock = (XdrvMailbox.payload) ? (1 << TasmotaGlobal.devices_present) -1 : 0;
+      } else {                       // Control individual bits
+        bitWrite(Settings->power_lock, XdrvMailbox.index -1, XdrvMailbox.payload & 1);
+      }
+    }
+    char stemp1[33];
+    ext_snprintf_P(stemp1, sizeof(stemp1), PSTR("%*_b"), TasmotaGlobal.devices_present, Settings->power_lock);
+    ResponseCmndChar(stemp1);
+  }
+}
+
 /********************************************************************************************/
 
 typedef struct {

tasmota/tasmota_support/support_tasmota.ino

@@ -712,6 +712,11 @@ void ExecuteCommandPower(uint32_t device, uint32_t state, uint32_t source)
   }
   TasmotaGlobal.active_device = device;
 
+  if (bitRead(Settings->power_lock, device -1)) {
+    AddLog(LOG_LEVEL_INFO, PSTR("CMD: Power%d is LOCKED"), device);
+    state = POWER_SHOW_STATE;            // Only show state. Make no change
+  }
+
   if (state != POWER_SHOW_STATE) {
     SetPulseTimer((device -1) % MAX_PULSETIMERS, 0);
   }