5.9.0 20171030
* Rewrite code (partly) using Google C++ Style Guide
(https://google.github.io/styleguide/cppguide.html)
* Rewrite code by using command lookup tables and javascript (client
side) web page expansions
* Change HTML/CSS to enable nicer form field entry
* Change default PWM assignments for H801 RGB(CW) led controller to
support optional Color/Dimmer control
* GPIO04 (W2) from GPIO_PWM2 to GPIO_USER to be user configurable
for GPIO_PWM5 (second White - Warm if W1 is Cold)
* GPIO12 (Blue) GPIO_PWM3 no change
* GPIO13 (Green) from GPIO_PWM4 to GPIO_PWM2
* GPIO14 (W1) from GPIO_PWM1 to GPIO_USER to be user configurable
for GPIO_PWM4 (first White - Cold or Warm)
* GPIO15 (Red) from GPIO_PWM5 to GPIO_PWM1
* Change default PWM assignments for MagicHome RGB(W) led controller to
support optional Color/Dimmer control
* GPIO05 (Green) from GPIO_PWM4 to GPIO_PWM2
* GPIO12 (Blue) from GPIO_PWM5 to GPIO_PWM3
* GPIO13 (White) GPIO_USER to be user configurable for GPIO_PWM4
(White - Cold or Warm)
* GPIO14 (Red) from GPIO_PWM3 to GPIO_PWM1
* Change default PWM assignment for Witty Cloud to support optional
Color/Dimmer control (#976)
* GPIO12 (Green) from GPIO_PWM4 to GPIO_PWM2
* GPIO13 (Blue) from GPIO_PWM5 to GPIO_PWM3
* GPIO15 (Red) from GPIO_PWM3 to GPIO_PWM1
* Change when another module is selected now all GPIO user configuration
is removed
* Change command name IRRemote to IRSend (#956)
* Remove Arduino IDE version too low warning as it interferes with
platformio.ini platform = espressif8266_stage
* Fix command FullTopic entry when using serial or console interface
* Fix possible UDP syslog blocking
* Fix minimum TelePeriod of 10 seconds set by web page
* Fix command GPIOx JSON response (#897)
* Fix inverted relay power on state (#909)
* Fix compile error when DOMOTICZ_UPDATE_TIMER is not defined (#930)
* Fix alignment of web page items in some browsers (#935)
* Fix setting all saved power settings to Off when SetOption0
(SaveState) = 0 (#955)
* Fix timezone range from -12/12 to -13/13 (#968)
* Fix Southern Hemisphere TIME_STD/TIME_DST (#968)
* Fix TLS MQTT SSL fingerprint test (#970, #808)
* Fix virtual relay status message used with Color/Dimmer control (#989)
* Fix command IRSend and IRHvac case sensitive parameter regression
introduced with version 5.8.0 (#993)
* Fix pressure calculation for some BMP versions regression introduced
with version 5.8.0i (#974)
* Fix Domoticz Dimmer set to same level not powering on (#945)
* Fix Blocked Loop when erasing large flash using command reset 2
(#1002)
* Fix relay power control when light power control is also configured as
regression from 5.8.0 (#1016)
* Fix Mqtt server mDNS lookup only when MqttHost name is empty (#1026)
* Add debug information to MQTT subscribe
* Add translations to I2Cscan
* Add translation to BH1750 unit lx
* Add light scheme options (Color cycle Up, Down, Random) and moving
WS2812 schemes up by 3
* Add Domoticz counter sensor to IrReceive representing Received IR
Protocol and Data
* Add option 0 to MqttHost to allow empty Mqtt host name
* Add support for Arilux AL-LC01 RGB Led controller (#370)
* Add esp8266 de-blocking to PubSubClient library (#790)
* Add Domoticz sensors for Voltage and Current (#903)
* Add platformio OTA upload support (#928, #934)
* Add warning to webpage when USE_MINIMAL is selected (#929)
* Add smoother movement of hour hand in WS2812 led clock (#936)
* Add support for Magic Home RGBW and some Arilux Led controllers (#940)
* Add command SetOption15 0 (default) for command PWM control or
SetOption15 1 for commands Color/Dimmer control to PWM RGB(CW) leds
(#941)
* Add Domoticz counter sensor to Sonoff Bridge representing Received RF
code (#943)
* Add support for Luani HVIO board
(https://luani.de/projekte/esp8266-hvio/) (#953)
* Add PWM initialization after restart (#955)
* Add IR Receiver support. Disable in user_config.h (#956)
* Add support for inverted PWM (#960)
* Add Sea level pressure calculation and Provide command Altitude (#974)
* Add support for up to 8 relays (#995)
* Add commands RfSync, RfLow, RfHigh, RfHost and RfCode to allow sending
custom RF codes (#1001)
* Add retain to ENERGY messages controlled by command SensorRetain
(#1013)
* Add commands Color2, Color3, Color4, Width2, Width3, Width4 and
SetOption16 to set Ws2812 Clock parameters (#1019)
* Add German language file (#1022)
* Add support for connecting to MQTT brokers without userid and/or
password (#1023)
* Add support for esp8266 core v2.4.0-rc2 (#1024)
* Add commands PwmRange 1,255..1023 and PwmFrequency 1,100..4000 (#1025)
* Add Polish language file (#1044, #1047)
* Add support for KMC 70011 Power Monitoring Smart Plug (#1045)
* Add support for VEML6070 I2C Ultra Violet level sensor (#1053)
* Add light turn Off Fade (#925)
* Add IrSend command option Panasonic as IrSend {"Protocol":"Panasonic",
"Bits":16388, "Data":<Panasonic data>}
* where 16388 is 0x4004 hexadecimal (#1014)
* Add retry counter to DHT11/21/22 sensors (#1082)
5.8.0 20170918
* Remove the need for NeoPixelBus library for Hue
support
* Consolidate WS2812 into Sonoff Led for flexible future led
strip library changes
* Invert WS2812 fade speed to align with Sonoff
led (Speed 1 = fast, Speed 8 = slow)
* Remove upper case MQTT receive
buffer
* Reduce code and string length for output of commands Modules
and GPIOs
* Add Sonoff SC debug information
* Change syslog service
*
Removed webserver syslog disable as now no longer needed
* Increased
default MQTT message size from 368 to 405 bytes while keeping
MQTT_MAX_PACKET_SIZE = 512 (because we can)
* Fix MQTT Offline or
Remove MQTT retained topic code
* Fix Domoticz loop when Emulation is
selected
* Add blink to WS2812 and Sonoff Led (#643)
* Add option
WIFI_WAIT (5) to command WifiConfig to allow connection retry to same AP
without restart or update flash (#772, #869)
* Add support for Witty
Cloud (#794)
* Add GPIO14 to Sonoff Dual (#797, #839)
* Add support
for Yunshan Wifi Relay (#802)
* Add GPIO16 input pulldown (#827)
* Add
timeout to DHT and DS18B20 sensors (#852)
* Fix watchdog timeout caused
by lack of stack space by moving to heap (#853)
* Allow LogPort and
MqttPort up to 65535 and add LogPort tot Status 3 (#859)
* Allow
command SwitchTopic in group mode (#861)
* Allow command SwitchMode if
no switches are defined (#861)
* Add optional dimmer parameter to
command Wakeup for WS2812, AiLight, Sonoff B1, Led and BN-SZ01 (#867)
*
Fix basic On, Off, Toggle, Blink and BlinkOff commands when other
language is selected (#874)
5.7.0 20170907
* Shrink module configuration webpage
* Fix settings order during startup to allow for displaying debug
messages
* Fix some string length issues
* Add more string length tests by using strncpy
* Add Ai-Thinker RGBW led (AiLight)
* Add Power check and add PulseTime to power check at startup (#526)
* Add Supla Espablo support (#755)
* Add more precision to Sonoff Pow period and power results using
command WattRes 0|1 (#759)
* Add basic internationalization and localization (#763)
* Add more Sonoff Pow range checking (#772)
* Fix invalid JSON (#786, #822)
* Add duplicate check to received RF signal within 2 seconds for Sonoff
Bridge (#810)
5.6.1 20170818
* Change module list order in webpage
* Fix Sonoff T1 1CH and 2CH configuration (#751)
*
* 5.6.0 20170818
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Sonoff T1 support (#582)
* Add AnalogInput0 if configured as Analog Input to webpage (#697, #746)
* Add command SetOption14 0|1 to enable interlock mode (#719, #721)
* Fix Mitsubishi HVAC IR power controll (#740)
5.5.2i
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support (saves 1k code
space)
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Fix Mitsubishi HVAC IR power controll (#740)
* Add Sonoff T1 support (#582)
5.5.0 20170730
* Reduce code space by removing the following commands as they are
replaced by SetOption alternatives:
* SaveState = SetOption0
* ButtonRestrict = SetOption1
* Units = SetOption2
* MQTT = SetOption3
* MQTTResponse = SetOption4
* TempUnit = SetOption8
* Smoothing WS2812 animation poll, invert fade speed and max allowed
wakeup time down to 3000 seconds
* Fix initial button press detection
* Add support for Sonoff RF Bridge 433 using command RfKey
* Fix regression from 5.0.7 by increasing message buffer size from 360
to 368 to accomodate 4 x DS18x20 sensors (#637)
* Add GroupTopic to Topic test when using ButtonTopic/SwitchTopic to
send either ON/OFF or TOGGLE (#642)
* Adjust HLW calibration limits to accomodate HuaFan device and add
commands HlwPSet, HlwUSet and HlwISet (#654)
5.4.0 20170725
* Fix command reset regression introduced in 5.2.0
* Increase polling from 0.1 second to 0.05 second
* Add multipress to all buttons
* Fix button 1 double press behaviour on multi relay devices
* Add support for Hua Fan Smart Socket (#479)
* Add support for Sonoff 4ch Pro (#565)
* Add command SetOption13 1 to allow immediate action on single button
press
* (disables multipress, hold and unrestricted commands) (#587)
5.3.0 20170715
* Major Hue rewrite which might introduce Alexa problems. If so,
initiate an issue
* Add support for Sonoff Led and BN-SZ01 Ceiling Led brightness control
to Hue
* Fix Sonoff Led Power, Dimmer and Color MQTT response (#176)
* Add commands Delay and Backlog to allow multiple commands at once
separated by ";" (#593)
* Use default flashmode DOUT to solve restart hangs on esp8285 chips
(#453, #598)
* Change Web console column width from 99 to 300 (#599)
5.2.4 20170703
* Removed flash mode update after selecting different module solving
esp8285 related problems
* Add device type flag to sonoff_template.ino
* Change Sonoff Led Wakeup and add support for Sonoff BN-SZ01 Led
5.1.1 20170517
* Allow command FullTopic in group mode
* Prepare for more use of RTC memory
* Add independant WS2812 led string power control (#386, #390)
* Add command Counter<x> to control up to four GPIO falling edge
interrupt counters or timers (#459)
* Add command CounterType<x> to select between pulse counting or pulse
timing
* Add command CounterDebounce to select global counter debounce time in
mSec
5.1.0 20170513
* Fix Offline/Removal of retained topic when FullTopic is changed
* Add FullTopic to MQTT Configuration and Information web page
* Adde license model GPLv3 (#188)
4.1.3 20170410
* Add user configuarble GPIO to module S20 Socket and Slampher
* Add support for Sonoff SC (#112)
* Set PWM frequency from 1000Hz to 910Hz as used on iTead Sonoff Led
firmware (#122)
* Set Sonoff Led unconfigured floating outputs to 0 to reduce exceptions
due to power supply instabilities (#122)
* Add Access Point Mac Address to Status 11 and Telemetry (#329)
* Fix DS18B20 negative temperature readings (#334)
4.1.0 20170325
* Change static IP addresses in user_config.h from list (using commas)
to string (using dots)
* Unify display result of commands Modules, Module and Gpios
* Rewrite Module selection web page to bring size down from 18651 to
4319 bytes (!) (#234, #240)
* Add basic support for (Lixada) H801 RGBWW controller (#252)
* Add command Prefix1 to Prefix3 to assign SUB_PREFIX, PUB_PREFIX and
PUB_PREFIX2 respectively (#255)
* Add static ip addresses to flash (#262)
* Add commands IpAddress, Gateway, Subnetmask and DnsServer to select
static ip addresses (#273)
4.0.7 20170319
* Increased Sonoff Led PWM frequency from 432 to 1000
* Fix possible watch dog reboot after changing module type on web page
* Fix reporting of GPIO usage from web page
* Fix Sonoff Led blank during firmware upgrade
* Fix Sonoff Led flicker and possible flash corruption by using latest
Arduino-esp8266 versions
* of pwm core files included in sonoff library (#211)
* Add PWM output control with commands PWM1 to PWM5 using user
selectable GPIOs (#211)
* Fix exceptions due to low values of commands HlwPCal (10000), HlwUCal
(1000) and HlwICal (2500) (#223)
* Add Switch state to sensor status (#227, #233)
* Add user configuarble GPIO to module Sonoff Touch (#228)
* Add define WEB_PORT to user_config.h to change default web server port
from 80 (#232)
* Fix failed Ota Firmware upgrade started from Web page (#235)
4.0.6 20170316
* Fix to better find device by Wifi hostname
* Fix compile error when some I2C devices are disabled
* Add (experimental) support for SHT1X emulating I2C (#97)
* Add ADC to ElectroDragon (#203)
* Add support for Sonoff Dev (#206)
4.0.5 20170314
* Add command Status 11 to show power status with Vcc if define
USE_ADC_VCC is enabled (default)
* Add ADC input to Sonoff SV and Wemos D1 mini - Needs recompile with
define USE_ADC_VCC disabled (#137)
* Add MQTT host:port to timeout message (#199)
4.0.5 20170314
* Add command Status 11 to show power status with Vcc if define
USE_ADC_VCC is enabled (default)
* Add ADC input to Sonoff SV and Wemos D1 mini - Needs recompile with
define USE_ADC_VCC disabled (#137)
* Add MQTT host:port to timeout message (#199)
4.0.4 20170312
* Add pulse timers for up to 4 relays (#106)
* Fix Sonoff Led power state when dimmer or color is 0 (#176)
* Add command NtpServer<x> to configure up to three NTP servers (#177)
* Delete module User Test as module Wemos D1 mini has same/more user
configurable GPIO (#178)
* Add more user configurable GPIO to module ElectroDragon (#183)
4.0.3 20170309
* Renamed Module NodeMCU to WeMos D1 mini
* Add GPIO1 as user option to some modules
* Add Buttons, Relays and Leds to user configurable options (#159)
* Add description on Module parameters web page to some well known GPIOs
(#107, #171)
3.9.22 20170228
* Update web console
* Fix Status 4 JSON message
* Add Exception info during restart if available
* Add osWatch service to detect loop hangs that might happen during
(OTA) upgrades
* Add WiOn support for relay and switch only (#82, #102)
* Allow for user specified relay count up to four in sonoff_template.h
(#109)
* Add support for HTU21 compatible I2C sensors SI7013, SI7020 and SI7021
(#118)
* Add NodeMCU or Wemos configuration option (#119)
3.9.21 20170224
* Add ajax to web root page and web console (#79)
* Add commands SwitchMode1..4 and enable user switches 2, 3 and 4 (#84,
#88)
* Fix MQTT upgrade when webserver is active
3.9.17 20170217
* Fix possible ArduinoJSON related memory fragmentation
* Changed console logging using less memory
* Add GPIO04 as user selectable for Sonoff Dual (#75)
3.9.16 20170214
* Update latching relay handler
* Add support for IR led using IRremoteESP8266 library (#59)
* Add Hue argument passing using ArduinoJSON library (#59)
3.9.15 20170213
* Change JSON float values from string to number according to
http://json.org (#56)
* Add support for exs latched relay module
https://ex-store.de/ESP8266-WiFi-Relay-V31 (#58)
* Add support for inverted relays
* Changed MAX_LOG_LINES from 70 to 60 to preserve memory
3.9.14 20170211
* Add False and True as alternatives for 0/Off and 1/On (#49)
* Fix Status10 JSON format (#52)
* Fix DS18x20 using OneWire library (#53)
3.9.13 20170210
* Add FlashChipSize to Status 4
* Removed redundant DHT2 option and code
* Add Sonoff SV GPIO pin 05 configuration (#40)
* Add configuration file backup and restore via web page
* Fix latency due to light_sleep mode even if sleep was set to zero
(#50)
3.9.13 20170210
* Add FlashChipSize to Status 4
* Removed redundant DHT2 option and code
* Add Sonoff SV GPIO pin 05 configuration (#40)
* Add configuration file backup and restore via web page
* Fix latency due to light_sleep mode even if sleep was set to zero
(#50)
3.9.11 20170204
* Fix command I2Cscan
* Fix not allowed spaces in Topic, ButtonTopic and SwitchTopic
* Make all TELEMETRY, STATUS and COMMAND message topics unique (#4)
* Advertise command topic to be used by iobroker (#299)
* Fix butten (non)detection if no GPIO_KEY1 is defined (#13)
* Change WeMo serialnumber from 7 decimal chars to 8 hexadecimal chars
(#18)
* Update web page with Build Date/Time, Emulation and mDNS Discovery and
Advertise information (#21)
