5.12.0 20180209
* Change library PubSubClient.h define MQTT_MAX_PACKET_SIZE from 512 to
1000 for Home Assistant support
* Change relation of define MESSZ being dependent on PubSubClient.h
define MQTT_MAX_PACKET_SIZE
* Change command color parameter input checks to less strict for Home
Assistant support
* Change command Ina219Mode into command Sensor13
* Change commands HlwPCal, HlwUCal and HlwICal to PowerCal, VoltageCal
and CurrentCal to be used for both Pow and S31 calibration
* Change commands HlwPSet, HlwUSet and HlwISet to PowerSet, VoltageSet
and CurrentSet to be used for both Pow and S31 calibration
* Change uptime from hour to second resulting in a display of
123T13:45:21 where 123 is days
* Change module name Wemos D1 mini into Generic (#1220)
* Change HTML from width=100% to style=width:100% supporting HTML5
(#1358)
* Change OSWATCH_RESET_TIME (Blocked loop) from 30 to 120 seconds to
allow slow networks (#1556)
* Change WIFI_MANAGER_SEC into WIFI_CONFIG_SEC (#1616)
* Change function pointers code to save code space and memory (#1683)
* Change webserver argument processing gaining 5k code space (#1705)
* Change weblog memory usage (#1730, #1793, #1819)
* Update TasmotaSerial library to 1.1.0
* Update language files Italian (#1594), Dutch (#1723) and Spanish
(#1722)
* Fix Non-English JSON temperature unit attachement
* Fix Arilux RF induced exception by moving interrupt handler to iram on
non ESP8266/Arduino lib v2.3.0
* Fix truncated command names and wrong response for DomoticzSwitchIdx
(#1571)
* Fix %-sign issue as printf escape character in Humidity and Sonoff SC
(#1579)
* Fix DS18B20 temperature JSON decimal dot (#1561)
* Fix Energy JSON message (#1621)
* Fix IRSend parameter translation (#1636)
* Fix TSL2561 device detection (#1644, #1825)
* Fix BME680 teleperiod resistance measuring (#1647)
* Fix Energy Monitoring Energy Today and Energy Total reading after
restart (#1648)
* Fix IRReceive Data value (#1663)
* Fix Energy Monitoring Energy Period roll-over (#1688)
* Fix compiler warnings (#1774)
* Fix command PWM response if no PWM channel is configured (#1783)
* Add locale Decimal Separator to Web sensor page
* Add ColorTemperature to light status message
* Add command PowerOnState option 5 which inverts PulseTime and allows
for delayed always on after power on
* Add OtaMagic two step Web server OTA upgrade using filename-minimal
image if OTA free space is too small
* Add support for PMS5003 and PMS7003 particle concentration sensor
* Add command SetOption21 1 to allow Energy Monitoring when power is off
on Sonoff Pow and Sonoff S31 (#1420)
* Add Chinese language file (#1551)
* Add French language file (#1561)
* Add Spanish language file (#1589)
* Add HTTP Allow Cross Origin removed from ESP8266/Arduino lib v2.4.0
(#1572)
* Add Home Assistant MQTT Discovery for switch and light to be enabled
by command SetOption19 1 (#1534) or define
HOME_ASSISTANT_DISCOVERY_ENABLE in user_config.h (#1685)
* Add command State to retrieve device state information (same data as
teleperiod state and status 11 in slightly different JSON format)
* Add optional login to Webserver AP mode (#1587, #1635)
* Add command Sensor15 2 to start MHZ19(B) Zero Point Calibration
(#1643)
* Add support for Sonoff S31 Smart Socket with Power Consumption
Detection (#1626)
* Add command SetOption20 to allow update of Dimmer/Color/Ct without
turning power on (#1719, #1741)
* Add NTP sync time slot based on chip id (#1773)
* Add cursor pointer to web button (#1836)
5.11.0 20180107
* Minor webpage HTML optimizations (#1358)
* Updated
German translation (#1438)
* Change Sonoff Pow Energy MQTT data message
and consolidate Status 8 into Status 10
* Change ADS1115 default
voltage range from +/-2V to +/-6V (#1289)
* Change text to Active for 3
minutes (#1364)
* Change Wemo SetBinaryState to distinguish from
GetBinaryState (#1357)
* Change output of HTTP command to valid JSON
and Array only (#1363)
* Removed all MQTT, JSON and Command language
defines from locale files and set fixed to English (#1473)
* Renamed
commands Color2,3,4 to Color3,4,5
* Fix BME280 calculation (#1051)
*
Fix Sonoff Bridge missed learned key if learned data contains 0x55 (End
of Transmission) flag (#1095, #1294)
* Fix PWM initialization in
Dimmer/Color mode (#1321)
* Fix Wemo Emulation (#1357)
* Fix display
of build date and time in non-english locale (#1465)
* Fix Wemo and Hue
emulation by adding M-Search response delay (#1486)
* Add libraries
Adafruit_BME680-1.0.5, Adafruit_Sensor-1.0.2.02, TasmotaSerial-1.0.0 and
TSL2561-Arduino-Library
* Add command Color2 to set color while keeping
same dimmer value
* Add device function pointers
* Add support for
SenseAir S8 CO2 sensor
* Add color led signal to Carbon Dioxide (CO2)
sensors using defines CO2_LOW and CO2_HIGH in user_config.h
* Add
support for Domoticz Air Quality sensor to be used by MH-Z19(B) and
SenseAir sensors
* Add support for PZEM004T energy sensor
* Add
support for iTead SI7021 temperature and humidity sensor by
consolidating DHT22 into AM2301 and using former DHT22 as SI7021 (#735)
* Add support for BME680 using adafruit libraries (#1212)
* Add support
for MH-Z19(B) CO2 sensor (#561, #1248)
* Add multipress support and
more user configurable GPIO to Sonoff Dual R2 (#1291)
* Add support for
TSL2561 using adafruit library (#661, #1311)
* Add support for SHT3x
(#1314)
* Add support for Arilux LC06 (#1414)
* Add Italian language
file (#1449)
* Add 2nd Gen Alexa support to Wemo emulation discovery
(#1357, #1450)
* Add define for additional number of WS2812 schemes
(#1463)
