# RELEASE NOTES ## Migration Information **This version removes support for direct migration from versions before v8.1.0 (Doris)** See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version. **Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial.** If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version. Pay attention to the following version breaks due to dynamic settings updates: 1. Migrate to **Sonoff-Tasmota 3.9.x** 2. Migrate to **Sonoff-Tasmota 4.x** 3. Migrate to **Sonoff-Tasmota 5.14** (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions 4. Migrate to **Sonoff-Tasmota 6.7.1** (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions 5. Migrate to **Tasmota 7.2.0** (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin) --- Major change in parameter storage layout --- 6. Migrate to **Tasmota 8.5.1** (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin) --- Major change in internal GPIO function representation --- 7. Migrate to **Tasmota 9.1** (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz) 8. Upgrade to **latest release** (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz) While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v9.1.0 Imogen** the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing **v9.1.0**. ## Supported Core versions This release will be supported from ESP8266/Arduino library Core version **2.7.8** due to reported security and stability issues on previous Core version. This will also support gzipped binaries. This release will be supported from ESP32/Arduino library Core version **v3.1.1.250203**. Support of ESP8266 Core versions before 2.7.8 and ESP32 Core versions before v3.1.1.250203 have been removed. ## Support of TLS In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT) ## Initial configuration tools For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface. ## Initial installation Easy initial installation of Tasmota can be performed using the [Tasmota WebInstaller](https://tasmota.github.io/install/). ## Provided Binary Downloads ### ESP8266 or ESP8285 based The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.8**. - **tasmota.bin** = The Tasmota version with most drivers for 1M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota-4M.bin** = The Tasmota version with most drivers and filesystem for 4M+ flash. - **tasmota-AD.bin** to **tasmota-VN.bin** = The Tasmota version in different languages for 1M+ flash. - **tasmota-lite.bin** = The Lite version without most drivers and sensors for 1M+ flash. - **tasmota-knx.bin** = The Knx version without some features but adds KNX support for 1M+ flash. - **tasmota-sensors.bin** = The Sensors version adds more useful sensors for 1M+ flash. - **tasmota-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash. - **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support for 1M+ flash. - **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version for 2M+ flash. - **tasmota-zigbee.bin** = The dedicated cc25xx Zigbee Bridge version for 4M+ flash. Above binaries are also available as gzipped version allowing faster uploads. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/firmware/release-firmware - http://ota.tasmota.com/tasmota/release Historical binaries can be downloaded from - http://ota.tasmota.com/tasmota/release-14.5.0 The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz`` ### ESP32, ESP32-C2, ESP32-C3, ESP32-C6, ESP32-S2 and ESP32-S3 based The following binary downloads have been compiled with ESP32/Arduino library core version **v3.1.1.250203**. - **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash. - **tasmota32s2.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial and 4M+ flash. - **tasmota32s2cdc.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial over embedded USB CDC only and 4M+ flash. - **tasmota32s3.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S3 with USB HWCDC and fallback to serial and 4M+ flash. - **tasmota32c2.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with serial and 4M+ flash. - **tasmota32c3.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with USB HWCDC and fallback to serial and 4M+ flash. - **tasmota32c6.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C6 with USB HWCDC and fallback to serial and 4M+ flash. - **tasmota32-AD.bin** to **tasmota32-VN.bin** = The Tasmota version in different languages for 4M+ flash. - **tasmota32-bluetooth.bin** = The Bluetooth version adds BLE support for 4M+ flash. - **tasmota32-display.bin** = The Display version without Energy Monitoring but adds display support for 4M+ flash. - **tasmota32-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash. - **tasmota32-lvgl.bin** = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash. - **tasmota32-nspanel.bin** = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support. - **tasmota32-webcam.bin** = The Webcam version adds webcam support for 4M+ flash. - **tasmota32-zbbridgepro.bin** - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/firmware/release-firmware - https://ota.tasmota.com/tasmota32/release Historical binaries can be downloaded from - https://ota.tasmota.com/tasmota32/release-14.5.0 The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin`` ## Additional information [List](MODULES.md) of embedded modules. [Complete list](BUILDS.md) of available feature and sensors. ## Changelog v14.5.0 Ruth ### Added - Command `SetOption163 1` to disable display of Device name in GUI header - Command `FileLog 0..4` to enable logging to filesystem using up to 16 rotating log files of 100kB (`#define FILE_LOG_SIZE 100`) - Command `FileLog 10..14` to enable logging to filesystem using up to 16 log files of 100kB (`#define FILE_LOG_SIZE 100`) - Command I2sLoop [#22807](https://github.com/arendst/Tasmota/issues/22807) - Support for Lithuanian language translations by zzdovydas [#22971](https://github.com/arendst/Tasmota/issues/22971) - Support for PCF85063 RTC [#22727](https://github.com/arendst/Tasmota/issues/22727) - Support for Senseair S88 CO2 sensor [#22733](https://github.com/arendst/Tasmota/issues/22733) - Support for C8-CO2-5K CO2 sensor [#22905](https://github.com/arendst/Tasmota/issues/22905) - Support for ESP32 Two-Wire Automotive Interface (TWAI) or Controller Area Network (CAN) busses - `#define FIX_JSON_HEXADECIMAL` to change JSON hexadecimal value "FF5F78" into "0xFF5F78" [#22919](https://github.com/arendst/Tasmota/issues/22919) - Support for RC-switch decoding of 64-bit received data - Support for WiZ Smart Remote using `#define USE_WIZMOTE` and command `SetOption164 1` - `MqttTLS` field in `Status 6` to indicate if the MQTT connection is encrypted [#22995](https://github.com/arendst/Tasmota/issues/22995) - Formatter `%_U` for `ext_snprintf_P()` to print uint64_t variable as decimal equivalent to `%llu` - GPS driver select baudrate using GPIO GPS_RX1 (9600bps), GPS_RX2 (19200bps) or GPS_RX3 (38400bps) [#22869](https://github.com/arendst/Tasmota/issues/22869) - I2S AAC support for web radio [#22787](https://github.com/arendst/Tasmota/issues/22787) - I2S Opus stream and file support for opus/aac [#22795](https://github.com/arendst/Tasmota/issues/22795) - ESP32 command `PixelType` to change the WS2812 color order and channel number [#22876](https://github.com/arendst/Tasmota/issues/22876) - ESP32 TasmotaLED change dynamically the number of pixels [#22754](https://github.com/arendst/Tasmota/issues/22754) - ESP32 expand `Pixels` with reverse, height and alternate [#22755](https://github.com/arendst/Tasmota/issues/22755) - Display template for Waveshare ESP32-C6 LCD 1.47 [#22863](https://github.com/arendst/Tasmota/issues/22863) - Berry `animate.crenel` primitive [#22673](https://github.com/arendst/Tasmota/issues/22673) - Berry `tasmota.int(v, min, max)` function [#22723](https://github.com/arendst/Tasmota/issues/22723) - Berry `bytes().appendhex()` [#22767](https://github.com/arendst/Tasmota/issues/22767) - Berry `serial.read()` read only `n` bytes [#22835](https://github.com/arendst/Tasmota/issues/22835) - Berry `tasmota.global.tele_period` and `tasmota.settings.tele_period` [#22865](https://github.com/arendst/Tasmota/issues/22865) - Berry `tasmota.settings` entries for PixelType [#22912](https://github.com/arendst/Tasmota/issues/22912) - Berry `tasmota.add_rule_once` and auto-remove rules with same pattern and id [#22900](https://github.com/arendst/Tasmota/issues/22900) - Berry driver for M5Stack 8encoder [#22724](https://github.com/arendst/Tasmota/issues/22724) - Berry driver for AXP2102 and M5CoreS3 [#22878](https://github.com/arendst/Tasmota/issues/22878) - Berry driver for PN532 NFC/Mifare reader [#22899](https://github.com/arendst/Tasmota/issues/22899) - Berry example for HeatFan WiFi Controller - Berry WS2812 real-time Leds panel as app [#22788](https://github.com/arendst/Tasmota/issues/22788) - Berry scroll to Leds_matrix [#22693](https://github.com/arendst/Tasmota/issues/22693) - Berry unicode encoding to string parsing [#22713](https://github.com/arendst/Tasmota/issues/22713) - Berry light_pixels values to `tasmota.settings` [#22762](https://github.com/arendst/Tasmota/issues/22762) - Berry `tasmota.defer()` [#22976](https://github.com/arendst/Tasmota/issues/22976) - Berry `bytes().appendb64()` [#22767](https://github.com/arendst/Tasmota/issues/22767) - LVLG/HASPmota add color names from OpenHASP [#22879](https://github.com/arendst/Tasmota/issues/22879) - LVGL `lv.set_paint_cb()` to register a callback when screen is refreshed [#22909](https://github.com/arendst/Tasmota/issues/22909) - HASPmota support for `buttonmatrix` events [#22898](https://github.com/arendst/Tasmota/issues/22898) ### Changed - ESP32 Platform from 2024.12.30 to 2025.02.30, Framework (Arduino Core) from v3.1.0.241206 to v3.1.1.250203 and IDF to 5.3.2 [#22943](https://github.com/arendst/Tasmota/issues/22943) - GPIOViewer from v1.5.6 to v1.6.1 (No functional change) - Postpone save_data during light animation when fade is Off - Allow negative values for AdcParam/AdcGpio INPUT, TEMP and RANGE parameters [#22809](https://github.com/arendst/Tasmota/issues/22809) - Command `Pixels` has backwards compatible arguments fixing #22755 [#22791](https://github.com/arendst/Tasmota/issues/22791) - ESP32 disable PSRAM check (and on restart some relay toggles) with `#define DISABLE_PSRAMCHECK true` [#21266](https://github.com/arendst/Tasmota/issues/21266) - ESP32 Webcam resolution changes since v14.4.0 [#22901](https://github.com/arendst/Tasmota/issues/22901) - Berry `gpio.pin_mode` frees PWM on pin - Berry bit-shift operators to `int64` [#22709](https://github.com/arendst/Tasmota/issues/22709) - Berry callback now passes 5 arguments instead of 4 (in line with documentation) [#22908](https://github.com/arendst/Tasmota/issues/22908) - HASPmota use 'roboto.ttf' for automatic sizing of default font [#22697](https://github.com/arendst/Tasmota/issues/22697) - HASPmota add 'tag' attribute for free-form JSON [#22698](https://github.com/arendst/Tasmota/issues/22698) - HASPmota support for `tabview` [#22707](https://github.com/arendst/Tasmota/issues/22707) ### Fixed - Shutter discovery message regression from v14.4.1 [#22730](https://github.com/arendst/Tasmota/issues/22730) - LoraWan decoding of Dragino LDS02 and MerryIoT DW10 [#22880](https://github.com/arendst/Tasmota/issues/22880) - ESP32 TasMesh broker MAC address all zeros [#23005](https://github.com/arendst/Tasmota/issues/23005) - ESP32-Cx compilation fails on Windows [#22832](https://github.com/arendst/Tasmota/issues/22832) - Wrong RMT channels for ESP32S3, now depends on `soc_caps.h` [#23021](https://github.com/arendst/Tasmota/issues/23021) - Sonoff SPM `PowerOnState` overrules `SSPMPowerOnState` in mixed 4Relay setup with 4Relay version 1.0.0 - Webcam compilation with `define USE_WEBCAM` but without `define ENABLE_RTSPSERVER` [#22686](https://github.com/arendst/Tasmota/issues/22686) - Berry Zigbee fix wrong attributes [#22684](https://github.com/arendst/Tasmota/issues/22684) - Berry walrus operator [#22685](https://github.com/arendst/Tasmota/issues/22685) - Berry parser error in rare case [#22997](https://github.com/arendst/Tasmota/issues/22997) - LVGL updated `Antiburn.tapp` [#22699](https://github.com/arendst/Tasmota/issues/22699) - HASPmota exception when clicking on a checkbox [#23022](https://github.com/arendst/Tasmota/issues/23022) - Matter Air Quality sensor [#22708](https://github.com/arendst/Tasmota/issues/22708)