Tasmota/lib/libesp32/ESP-Mail-Client/examples/SMTP/External_Client/EthernetClient/EthernetClient.ino

/**
 * Created by K. Suwatchai (Mobizt)
 *
 * Email: suwatchai@outlook.com
 *
 * Github: https://github.com/mobizt/ESP-Mail-Client
 *
 * Copyright (c) 2023 mobizt
*/

/**
 * This example shows how to send Email using EthernetClient.
 *
 * This example used ESP32 and WIZnet W5500 Ethernet module.
 * 
 * For ESP32 and LAN8720 see examples/SMTP/Ethernet/ESP32/Send_Text.ino
 * 
 * ESP32 Arduino SDK native Ethernet using ETH.h is currently support Ethernet PHY chips
 * 
 * LAN8720, TLK101, RTL8201, DP83848, DM9051, KSZ8041 and KSZ8081.
 * 
 * For ESP8266, the native Ethernet is currently supported ENC28J60, W5100 and W5500.
 * 
 * You do not need to set external Client with native Ethernet support PHY/MAC chips.
 * 
 *
 */

/** Note for library update from v2.x.x to v3.x.x.
 * 
 *  Struct data names changed
 *
 * "ESP_Mail_Session" changes to "Session_Config"
 * "IMAP_Config" changes to "IMAP_Data"
 *
 * Changes in the examples
 *
 * ESP_Mail_Session session;
 * to
 * Session_Config config;
 *
 * IMAP_Config config;
 * to
 * IMAP_Data imap_data;
 */

#include <Arduino.h>

#include <ESP_Mail_Client.h>

#include <Ethernet.h>

#define SMTP_HOST "smtp.gmail.com"
#define SMTP_PORT 587

#define AUTHOR_EMAIL "<email>"
#define AUTHOR_PASSWORD "<password>"
#define RECIPIENT_EMAIL "<recipient email here>"

#define WIZNET_RESET_PIN 26 // Connect W5500 Reset pin to GPIO 26 of ESP32
#define WIZNET_CS_PIN 5     // Connect W5500 CS pin to GPIO 5 of ESP32
#define WIZNET_MISO_PIN 19  // Connect W5500 MISO pin to GPIO 19 of ESP32
#define WIZNET_MOSI_PIN 23  // Connect W5500 MOSI pin to GPIO 23 of ESP32
#define WIZNET_SCLK_PIN 18  // Connect W5500 SCLK pin to GPIO 18 of ESP32

unsigned long sentMillis = 0;

const int analog_pin = 34;

uint8_t Eth_MAC[] = {0x02, 0xF0, 0x0D, 0xBE, 0xEF, 0x01};

SMTPSession smtp;

EthernetClient eth_client;

void smtpCallback(SMTP_Status status);

void ResetEthernet()
{
    Serial.println("Resetting WIZnet W5500 Ethernet Board...  ");
    pinMode(WIZNET_RESET_PIN, OUTPUT);
    digitalWrite(WIZNET_RESET_PIN, HIGH);
    delay(200);
    digitalWrite(WIZNET_RESET_PIN, LOW);
    delay(50);
    digitalWrite(WIZNET_RESET_PIN, HIGH);
    delay(200);
}

void networkConnection()
{

    Ethernet.init(WIZNET_CS_PIN);

    ResetEthernet();

    Serial.println("Starting Ethernet connection...");
    Ethernet.begin(Eth_MAC);

    unsigned long to = millis();

    while (Ethernet.linkStatus() == LinkOFF || millis() - to < 2000)
    {
        delay(100);
    }

    if (Ethernet.linkStatus() == LinkON)
    {
        Serial.print("Connected with IP ");
        Serial.println(Ethernet.localIP());
    }
    else
    {
        Serial.println("Can't connect");
    }
}

void networkStatusRequestCallback()
{
    smtp.setNetworkStatus(Ethernet.linkStatus() == LinkON);
}

void sendEmail()
{

    Session_Config config;

    config.server.host_name = SMTP_HOST;
    config.server.port = SMTP_PORT;
    config.login.email = AUTHOR_EMAIL;
    config.login.password = AUTHOR_PASSWORD;

    config.login.user_domain = F("127.0.0.1");

    SMTP_Message message;

    message.sender.name = F("ESP Mail");
    message.sender.email = AUTHOR_EMAIL;
    message.subject = F("Test sending plain text Email");

    message.addRecipient(F("Someone"), RECIPIENT_EMAIL);

    message.text.content = "This is simple plain text message";

    smtp.setClient(&eth_client);

    smtp.networkConnectionRequestCallback(networkConnection);
    
    smtp.networkStatusRequestCallback(networkStatusRequestCallback);

    if (!smtp.connect(&config))
    {
        MailClient.printf("Connection error, Status Code: %d, Error Code: %d, Reason: %s", smtp.statusCode(), smtp.errorCode(), smtp.errorReason().c_str());
        return;
    }

    if (smtp.isAuthenticated())
        Serial.println("\nSuccessfully logged in.");
    else
        Serial.println("\nConnected with no Auth.");

    if (!MailClient.sendMail(&smtp, &message))
        MailClient.printf("Error, Status Code: %d, Error Code: %d, Reason: %s", smtp.statusCode(), smtp.errorCode(), smtp.errorReason().c_str());

    MailClient.printf("Free Heap: %d\n", MailClient.getFreeHeap());
}

void setup()
{

    Serial.begin(115200);

    Serial.println();

    networkConnection();

    /*
    For internal NTP client
    For times east of the Prime Meridian use 0-12
    For times west of the Prime Meridian add 12 to the offset.
    Ex. American/Denver GMT would be -6. 6 + 12 = 18
    See https://en.wikipedia.org/wiki/Time_zone for a list of the GMT/UTC timezone offsets
    */
    MailClient.setUDPClient(&udp_client, 0 /* GMT offset */);

    smtp.debug(1);

    smtp.callback(smtpCallback);
}

void loop()
{
    if (millis() - sentMillis > 120000 || sentMillis == 0)
    {
        sentMillis = millis();
        sendEmail();
    }
}

void smtpCallback(SMTP_Status status)
{
    Serial.println(status.info());

    if (status.success())
    {
        Serial.println("----------------");
        MailClient.printf("Message sent success: %d\n", status.completedCount());
        MailClient.printf("Message sent failed: %d\n", status.failedCount());
        Serial.println("----------------\n");

        for (size_t i = 0; i < smtp.sendingResult.size(); i++)
        {
            SMTP_Result result = smtp.sendingResult.getItem(i);

            MailClient.printf("Message No: %d\n", i + 1);
            MailClient.printf("Status: %s\n", result.completed ? "success" : "failed");
            MailClient.printf("Date/Time: %s\n", MailClient.Time.getDateTimeString(result.timestamp, "%B %d, %Y %H:%M:%S").c_str());
            MailClient.printf("Recipient: %s\n", result.recipients.c_str());
            MailClient.printf("Subject: %s\n", result.subject.c_str());
        }
        Serial.println("----------------\n");
        smtp.sendingResult.clear();
    }
}