mirror of
https://github.com/arendst/Tasmota.git
synced 2025-04-20 21:07:17 +00:00
3403ca1e0a
5.10.0 20171201 * Upgrade library ArduinoJson to 5.11.2 * Upgrade library IRRemoteEsp8266 to 2.2.1 + 2 commits but disabled some protocols (code size reduction) * Upgrade library NeoPixelBus to 2.2.9 * Upgrade library OneWire to 2.3.3 + 6 commits and disabled CRC lookup-table (#define ONEWIRE_CRC8_TABLE 0) (code size reduction) * Update library PubSubClient to 2.6 + 9 commits and additional delay (#790) * Update core_esp8266_wiring_digital.c to latest (staged) level * Patch library I2Cdevlib-Core for esp8266-core 2.4.0-rc2 compatibility * Remove command EnergyReset 1..3 now replaced by ENergyReset1 to EnergyReset3 * Remove spaces in JSON messages (code size reduction) * Renamed xsns_05_ds18x20.ino to xsns_05_ds18x20_legacy.ino still using library OneWire and providing dynamic sensor scan * Fix possible iram1_0_seg compile error by shrinking ICACHE_RAM_ATTR code usage * Fix PWM watchdog timeout if Dimmer is set to 100 or Color set to 0xFF (#1146) * Fix Sonoff Bridge Learn Mode hang caused by unrecognised RF code (#1181) * Fix blank console log window by using XML character encoding (#1187) * Fix wrong response name for command HlwISet (#1214) * Fix DHT type sensor timeout recognition by distinguish "signal already there" from "timeout" (#1233) * Add fixed color options 1..12 to command Color * Add + (plus) and - (minus) to commands Dimmer (+10/-10), Speed and Scheme * Add + (plus) and - (minus) to command Color to select 1 out of 12 preset colors * Add + (plus) and - (minus) to command Ct to control ColdWarm led ColorTemperature (+34/-34) * Add commands EnergyReset1 0..42500, EnergyReset2 0..42500 and EnergyReset3 0..42500000 * to (Re)set Energy Today, Yesterday or Total respectively in Wh (#406, #685, #1202) * Add optional ADS1115 driver as alternative for unsupported I2Cdevlib in esp8266-core 2.4.0-rc2 * Add support for INA219 Voltage and Current sensor to be enabled in user_config.h with define USE_INA219 * Add support for Arilux LC11 (Clearing RF home code when selecting no Arilux module) * Add support for WS2812 RGBW ledstrips to be enabled in user_config.h with define USE_WS2812_CTYPE (#1156) * Add SettingsSaveAll routine to command SaveData to be used before controlled power down (#1202) * Add option PUSHBUTTON_TOGGLE (SwitchMode 7) to allow toggling on any switch change (#1221) * Add new xdrv_05_ds18x20.ino free from library OneWire and add the following features: * Add support for DS1822 * Add forced setting of 12-bit resolution for selected device types (#1222) * Add read temperature retry counter (#1215) * Fix lost sensors by performing sensor probe at restart only thereby removing dynamic sensor probe (#1215) * Fix sensor address sorting using ascending sort on sensor type followed by sensor address * Rewrite JSON resulting in shorter message allowing more sensors in default firmware image: * "DS18B20-1":{"Id":"00000483C23A","Temperature":19.5},"DS18B20-2":{"Id":"0000048EC44C","Temperature":19.6} * Add additional define in user_config.h to select either single sensor (defines disabled), new multi sensor (USE_DS18X20) or legacy multi sensor (USE_DS18X20_LEGACY) * Add clock support for more different pixel counts (#1226) * Add support for Sonoff Dual R2 (#1249) * Add FriendlyName to web page tab and add program information to web page footer (#1275)
NeoPixelBus
Arduino NeoPixel library
A library to control one wire protocol RGB and RGBW leds like SK6812, WS2811, WS2812 and WS2813 that are commonly refered to as NeoPixels and two wire protocol RGB like APA102 commonly refered to as DotStars.
Supports most Arduino platforms.
This is the most funtional library for the Esp8266 as it provides solutions for all Esp8266 module types even when WiFi is used.
Please read this best practices link before connecting your NeoPixels, it will save you alot of time and effort.
Adafruit NeoPixel Best Practices
For quick questions jump on Gitter and ask away.
For bugs, make sure there isn't an active issue and then create one.
Documentation
Installing This Library (prefered, you just want to use it)
Open the Library Manager and search for "NeoPixelBus by Makuna" and install
Installing This Library From GitHub (advanced, you want to contribute)
Create a directory in your Arduino\Library folder named "NeoPixelBus"
Clone (Git) this project into that folder.
It should now show up in the import list when you restart Arduino IDE.