Merge pull request #4768 from wled/fix-4268

Add mDNS resolution for network bus

wled00/bus_manager.cpp

@@ -5,6 +5,8 @@
 #include <Arduino.h>
 #include <IPAddress.h>
 #ifdef ARDUINO_ARCH_ESP32
+#include <ESPmDNS.h>
+#include "src/dependencies/network/Network.h" // for isConnected() (& WiFi)
 #include "driver/ledc.h"
 #include "soc/ledc_struct.h"
   #if !(defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32S2) || defined(CONFIG_IDF_TARGET_ESP32S3))
@@ -25,6 +27,7 @@
 #include "bus_wrapper.h"
 #include <bits/unique_ptr.h>
 
+extern char cmDNS[];
 extern bool cctICused;
 extern bool useParallelI2S;
 
@@ -102,7 +105,7 @@ void Bus::calculateCCT(uint32_t c, uint8_t &ww, uint8_t &cw) {
   } else {
     cct = (approximateKelvinFromRGB(c) - 1900) >> 5;  // convert K (from RGB value) to relative format
   }
-  
+
   //0 - linear (CCT 127 = 50% warm, 50% cold), 127 - additive CCT blending (CCT 127 = 100% warm, 100% cold)
   if (cct       < _cctBlend) ww = 255;
   else                       ww = ((255-cct) * 255) / (255 - _cctBlend);
@@ -699,6 +702,10 @@ BusNetwork::BusNetwork(const BusConfig &bc)
   _hasCCT = false;
   _UDPchannels = _hasWhite + 3;
   _client = IPAddress(bc.pins[0],bc.pins[1],bc.pins[2],bc.pins[3]);
+  #ifdef ARDUINO_ARCH_ESP32
+  _hostname = bc.text;
+  resolveHostname(); // resolve hostname to IP address if needed
+  #endif
   _data = (uint8_t*)d_calloc(_len, _UDPchannels);
   _valid = (_data != nullptr);
   DEBUGBUS_PRINTF_P(PSTR("%successfully inited virtual strip with type %u and IP %u.%u.%u.%u\n"), _valid?"S":"Uns", bc.type, bc.pins[0], bc.pins[1], bc.pins[2], bc.pins[3]);
@@ -733,6 +740,19 @@ size_t BusNetwork::getPins(uint8_t* pinArray) const {
   return 4;
 }
 
+#ifdef ARDUINO_ARCH_ESP32
+void BusNetwork::resolveHostname() {
+  static unsigned long nextResolve = 0;
+  if (Network.isConnected() && millis() > nextResolve && _hostname.length() > 0) {
+    nextResolve = millis() + 600000; // resolve only every 10 minutes
+    IPAddress clnt;
+    if (strlen(cmDNS) > 0) clnt = MDNS.queryHost(_hostname);
+    else WiFi.hostByName(_hostname.c_str(), clnt);
+    if (clnt != IPAddress()) _client = clnt;
+  }
+}
+#endif
+
 // credit @willmmiles & @netmindz https://github.com/wled/WLED/pull/4056
 std::vector<LEDType> BusNetwork::getLEDTypes() {
   return {
@@ -918,6 +938,13 @@ void BusManager::on() {
       }
     }
   }
+  #else
+  for (auto &bus : busses) if (bus->isVirtual()) {
+    // virtual/network bus should check for IP change if hostname is specified
+    // otherwise there are no endpoints to force DNS resolution
+    BusNetwork &b = static_cast<BusNetwork&>(*bus);
+    b.resolveHostname();
+  }
   #endif
   #ifdef ESP32_DATA_IDLE_HIGH
   esp32RMTInvertIdle();

wled00/bus_manager.h

@@ -133,6 +133,7 @@ class Bus {
     virtual uint16_t getUsedCurrent() const                     { return 0; }
     virtual uint16_t getMaxCurrent() const                      { return 0; }
     virtual size_t   getBusSize() const                         { return sizeof(Bus); }
+    virtual const String getCustomText() const                  { return String(); }
 
     inline  bool     hasRGB() const                             { return _hasRgb; }
     inline  bool     hasWhite() const                           { return _hasWhite; }
@@ -215,7 +216,7 @@ class Bus {
     uint8_t  _autoWhiteMode;
     // global Auto White Calculation override
     static uint8_t _gAWM;
-    // _cct has the following menaings (see calculateCCT() & BusManager::setSegmentCCT()):
+    // _cct has the following meanings (see calculateCCT() & BusManager::setSegmentCCT()):
     //    -1 means to extract approximate CCT value in K from RGB (in calcualteCCT())
     //    [0,255] is the exact CCT value where 0 means warm and 255 cold
     //    [1900,10060] only for color correction expressed in K (colorBalanceFromKelvin())
@@ -342,6 +343,10 @@ class BusNetwork : public Bus {
     size_t getBusSize() const override  { return sizeof(BusNetwork) + (isOk() ? _len * _UDPchannels : 0); }
     void   show() override;
     void   cleanup();
+    #ifdef ARDUINO_ARCH_ESP32
+    void   resolveHostname();
+    const String getCustomText() const override { return _hostname; }
+    #endif
 
     static std::vector<LEDType> getLEDTypes();
 
@@ -351,6 +356,9 @@ class BusNetwork : public Bus {
     uint8_t   _UDPchannels;
     bool      _broadcastLock;
     uint8_t   *_data;
+    #ifdef ARDUINO_ARCH_ESP32
+    String    _hostname;
+    #endif
 };
 
 
@@ -368,8 +376,9 @@ struct BusConfig {
   uint16_t frequency;
   uint8_t milliAmpsPerLed;
   uint16_t milliAmpsMax;
+  String text;
 
-  BusConfig(uint8_t busType, uint8_t* ppins, uint16_t pstart, uint16_t len = 1, uint8_t pcolorOrder = COL_ORDER_GRB, bool rev = false, uint8_t skip = 0, byte aw=RGBW_MODE_MANUAL_ONLY, uint16_t clock_kHz=0U, uint8_t maPerLed=LED_MILLIAMPS_DEFAULT, uint16_t maMax=ABL_MILLIAMPS_DEFAULT)
+  BusConfig(uint8_t busType, uint8_t* ppins, uint16_t pstart, uint16_t len = 1, uint8_t pcolorOrder = COL_ORDER_GRB, bool rev = false, uint8_t skip = 0, byte aw=RGBW_MODE_MANUAL_ONLY, uint16_t clock_kHz=0U, uint8_t maPerLed=LED_MILLIAMPS_DEFAULT, uint16_t maMax=ABL_MILLIAMPS_DEFAULT, String sometext = "")
   : count(std::max(len,(uint16_t)1))
   , start(pstart)
   , colorOrder(pcolorOrder)
@@ -379,6 +388,7 @@ struct BusConfig {
   , frequency(clock_kHz)
   , milliAmpsPerLed(maPerLed)
   , milliAmpsMax(maMax)
+  , text(sometext)
   {
     refreshReq = (bool) GET_BIT(busType,7);
     type = busType & 0x7F;  // bit 7 may be/is hacked to include refresh info (1=refresh in off state, 0=no refresh)

wled00/cfg.cpp

@@ -235,7 +235,8 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
       }
       ledType |= refresh << 7; // hack bit 7 to indicate strip requires off refresh
 
-      busConfigs.emplace_back(ledType, pins, start, length, colorOrder, reversed, skipFirst, AWmode, freqkHz, maPerLed, maMax);
+      String host = elm[F("text")] | String();
+      busConfigs.emplace_back(ledType, pins, start, length, colorOrder, reversed, skipFirst, AWmode, freqkHz, maPerLed, maMax, host);
       doInitBusses = true;  // finalization done in beginStrip()
       if (!Bus::isVirtual(ledType)) s++; // have as many virtual buses as you want
     }
@@ -379,7 +380,7 @@ bool deserializeConfig(JsonObject doc, bool fromFS) {
             DEBUG_PRINTF_P(PSTR("PIN ALLOC error: GPIO%d for touch button #%d is not a touch pin!\n"), btnPin[s], s);
             btnPin[s] = -1;
             PinManager::deallocatePin(pin,PinOwner::Button);
-          }          
+          }
           //if touch pin, enable the touch interrupt on ESP32 S2 & S3
           #ifdef SOC_TOUCH_VERSION_2    // ESP32 S2 and S3 have a function to check touch state but need to attach an interrupt to do so
           else
@@ -976,6 +977,7 @@ void serializeConfig(JsonObject root) {
     ins[F("freq")]   = bus->getFrequency();
     ins[F("maxpwr")] = bus->getMaxCurrent();
     ins[F("ledma")]  = bus->getLEDCurrent();
+    ins[F("text")]   = bus->getCustomText();
   }
 
   JsonArray hw_com = hw.createNestedArray(F("com"));
@@ -1340,4 +1342,4 @@ void serializeConfigSec() {
   if (f) serializeJson(root, f);
   f.close();
   releaseJSONBufferLock();
-}
+}

wled00/data/settings_leds.htm

@@ -284,6 +284,8 @@
 				gId("dig"+n+"l").style.display = (isD2P(t) || isPWM(t)) ? "inline":"none";  // bus clock speed / PWM speed (relative) (not On/Off)
 				gId("rev"+n).innerHTML = isAna(t) ? "Inverted output":"Reversed";           // change reverse text for analog else (rotated 180°)
 				//gId("psd"+n).innerHTML = isAna(t) ? "Index:":"Start:";                      // change analog start description
+				gId("net"+n+"h").style.display = isNet(t) && !is8266() ? "block" : "none";  // show host field for network types except on ESP8266
+				if (!isNet(t) || is8266()) d.Sf["HS"+n].value = "";                         // cleart host field if not network type or ESP8266
 			});
 			// display global white channel overrides
 			gId("wc").style.display = (gRGBW) ? 'inline':'none';
@@ -466,6 +468,7 @@ mA/LED: <select name="LAsel${s}" onchange="enLA(this,'${s}');UI();">
 <span id="p2d${s}"></span><input type="number" name="L2${s}" class="s" onchange="UI();pinUpd(this);"/>
 <span id="p3d${s}"></span><input type="number" name="L3${s}" class="s" onchange="UI();pinUpd(this);"/>
 <span id="p4d${s}"></span><input type="number" name="L4${s}" class="s" onchange="UI();pinUpd(this);"/>
+<div id="net${s}h" class="hide">Host: <input type="text" name="HS${s}" maxlength="32" pattern="[a-zA-Z0-9_\\-]*" onchange="UI()"/>.local</div>
 <div id="dig${s}r" style="display:inline"><br><span id="rev${s}">Reversed</span>: <input type="checkbox" name="CV${s}"></div>
 <div id="dig${s}s" style="display:inline"><br>Skip first LEDs: <input type="number" name="SL${s}" min="0" max="255" value="0" oninput="UI()"></div>
 <div id="dig${s}f" style="display:inline"><br><span id="off${s}">Off Refresh</span>: <input id="rf${s}" type="checkbox" name="RF${s}"></div>

wled00/data/style.css

@@ -79,6 +79,9 @@ input {
 input:disabled {
   color: #888;
 }
+input:invalid {
+  color: #f00;
+}
 input[type="text"],
 input[type="number"],
 input[type="password"],
@@ -202,4 +205,4 @@ td {
   #btns select {
     width: 144px;
   }
-}
+}

wled00/set.cpp

@@ -141,6 +141,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
     unsigned colorOrder, type, skip, awmode, channelSwap, maPerLed;
     unsigned length, start, maMax;
     uint8_t pins[5] = {255, 255, 255, 255, 255};
+    String text;
 
     // this will set global ABL max current used when per-port ABL is not used
     unsigned ablMilliampsMax = request->arg(F("MA")).toInt();
@@ -174,6 +175,7 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
       char sp[4] = "SP"; sp[2] = offset+s; sp[3] = 0; //bus clock speed (DotStar & PWM)
       char la[4] = "LA"; la[2] = offset+s; la[3] = 0; //LED mA
       char ma[4] = "MA"; ma[2] = offset+s; ma[3] = 0; //max mA
+      char hs[4] = "HS"; hs[2] = offset+s; hs[3] = 0; //hostname (for network types, custom text for others)
       if (!request->hasArg(lp)) {
         DEBUG_PRINTF_P(PSTR("# of buses: %d\n"), s+1);
         break;
@@ -224,9 +226,10 @@ void handleSettingsSet(AsyncWebServerRequest *request, byte subPage)
         maMax = request->arg(ma).toInt() * request->hasArg(F("PPL")); // if PP-ABL is disabled maMax (per bus) must be 0
       }
       type |= request->hasArg(rf) << 7; // off refresh override
+      text = request->arg(hs).substring(0,31);
       // actual finalization is done in WLED::loop() (removing old busses and adding new)
       // this may happen even before this loop is finished so we do "doInitBusses" after the loop
-      busConfigs.emplace_back(type, pins, start, length, colorOrder | (channelSwap<<4), request->hasArg(cv), skip, awmode, freq, maPerLed, maMax);
+      busConfigs.emplace_back(type, pins, start, length, colorOrder | (channelSwap<<4), request->hasArg(cv), skip, awmode, freq, maPerLed, maMax, text);
       busesChanged = true;
     }
     //doInitBusses = busesChanged; // we will do that below to ensure all input data is processed

wled00/xml.cpp

@@ -311,6 +311,7 @@ void getSettingsJS(byte subPage, Print& settingsScript)
       char sp[4] = "SP"; sp[2] = offset+s; sp[3] = 0; //bus clock speed
       char la[4] = "LA"; la[2] = offset+s; la[3] = 0; //LED current
       char ma[4] = "MA"; ma[2] = offset+s; ma[3] = 0; //max per-port PSU current
+      char hs[4] = "HS"; hs[2] = offset+s; hs[3] = 0; //hostname (for network types, custom text for others)
       settingsScript.print(F("addLEDs(1);"));
       uint8_t pins[5];
       int nPins = bus->getPins(pins);
@@ -350,6 +351,7 @@ void getSettingsJS(byte subPage, Print& settingsScript)
       printSetFormValue(settingsScript,sp,speed);
       printSetFormValue(settingsScript,la,bus->getLEDCurrent());
       printSetFormValue(settingsScript,ma,bus->getMaxCurrent());
+      printSetFormValue(settingsScript,hs,bus->getCustomText().c_str());
       sumMa += bus->getMaxCurrent();
     }
     printSetFormValue(settingsScript,PSTR("MA"),BusManager::ablMilliampsMax() ? BusManager::ablMilliampsMax() : sumMa);