diff --git a/wled00/NpbWrapper.h b/wled00/NpbWrapper.h
index a9fbd7c2e..9709d8aa4 100644
--- a/wled00/NpbWrapper.h
+++ b/wled00/NpbWrapper.h
@@ -13,12 +13,25 @@
 //#define WLED_USE_H801 //H801 controller. Please uncomment #define WLED_USE_ANALOG_LEDS as well
 //#define WLED_USE_5CH_LEDS  //5 Channel H801 for cold and warm white
 
+#ifndef BTNPIN
 #define BTNPIN  0  //button pin. Needs to have pullup (gpio0 recommended)
-#define IR_PIN  4  //infrared pin (-1 to disable)  MagicHome: 4, H801 Wifi: 0
-#define RLYPIN 12  //pin for relay, will be set HIGH if LEDs are on (-1 to disable). Also usable for standby leds, triggers,...
-#define AUXPIN -1  //debug auxiliary output pin (-1 to disable)
+#endif
 
+#ifndef IR_PIN
+#define IR_PIN  4  //infrared pin (-1 to disable)  MagicHome: 4, H801 Wifi: 0
+#endif
+
+#ifndef RLYPIN
+#define RLYPIN 12  //pin for relay, will be set HIGH if LEDs are on (-1 to disable). Also usable for standby leds, triggers,...
+#endif
+
+#ifndef AUXPIN
+#define AUXPIN -1  //debug auxiliary output pin (-1 to disable)
+#endif
+
+#ifndef RLYMDE
 #define RLYMDE 1  //mode for relay, 0: LOW if LEDs are on 1: HIGH if LEDs are on
+#endif
 
 //END CONFIGURATION
 
diff --git a/wled00/const.h b/wled00/const.h
index 4d2875723..bf29ce76b 100644
--- a/wled00/const.h
+++ b/wled00/const.h
@@ -1,6 +1,11 @@
 #ifndef wled_const_h
 #define wled_const_h
 
+//Defaults
+#define DEFAULT_CLIENT_SSID "Your_Network"
+#define DEFAULT_AP_PASS     "wled1234"
+#define DEFAULT_OTA_PASS    "wledota"
+
 //Access point behavior
 #define AP_BEHAVIOR_BOOT_NO_CONN  0            //Open AP when no connection after boot
 #define AP_BEHAVIOR_NO_CONN       1            //Open when no connection (either after boot or if connection is lost)
diff --git a/wled00/wled00.ino b/wled00/wled00.ino
index 606439756..475dfb065 100644
--- a/wled00/wled00.ino
+++ b/wled00/wled00.ino
@@ -85,6 +85,14 @@ DMXESPSerial dmx;
 #include "ir_codes.h"
 #include "const.h"
 
+#ifndef CLIENT_SSID
+#define CLIENT_SSID DEFAULT_CLIENT_SSID
+#endif
+
+#ifndef CLIENT_PASS
+#define CLIENT_PASS ""
+#endif
+
 
 #if IR_PIN < 0
 #ifndef WLED_DISABLE_INFRARED
@@ -117,8 +125,8 @@ char versionString[] = "0.9.1";
 
 
 //AP and OTA default passwords (for maximum change them!)
-char apPass[65] = "wled1234";
-char otaPass[33] = "wledota";
+char apPass[65] = DEFAULT_AP_PASS;
+char otaPass[33] = DEFAULT_OTA_PASS;
 
 
 //Hardware CONFIG (only changeble HERE, not at runtime)
@@ -130,8 +138,8 @@ char ntpServerName[33] = "0.wled.pool.ntp.org";//NTP server to use
 
 
 //WiFi CONFIG (all these can be changed via web UI, no need to set them here)
-char clientSSID[33] = "Your_Network";
-char clientPass[65] = "";
+char clientSSID[33] = CLIENT_SSID;
+char clientPass[65] = CLIENT_PASS;
 char cmDNS[33] = "x";                         //mDNS address (placeholder, will be replaced by wledXXXXXXXXXXXX.local)
 char apSSID[33] = "";                         //AP off by default (unless setup)
 byte apChannel = 1;                           //2.4GHz WiFi AP channel (1-13)
@@ -468,7 +476,7 @@ bool e131NewData = false;
 WS2812FX strip = WS2812FX();
 
 #define WLED_CONNECTED (WiFi.status() == WL_CONNECTED)
-#define WLED_WIFI_CONFIGURED (strlen(clientSSID) >= 1 && strcmp(clientSSID,"Your_Network") != 0)
+#define WLED_WIFI_CONFIGURED (strlen(clientSSID) >= 1 && strcmp(clientSSID,DEFAULT_CLIENT_SSID) != 0)
 
 //debug macros
 #ifdef WLED_DEBUG
diff --git a/wled00/wled05_init.ino b/wled00/wled05_init.ino
index bf1be5d99..40e3bef67 100644
--- a/wled00/wled05_init.ino
+++ b/wled00/wled05_init.ino
@@ -43,7 +43,7 @@ void wledInit()
   loadSettingsFromEEPROM(true);
   beginStrip();
   userSetup();
-  if (strcmp(clientSSID,"Your_Network") == 0) showWelcomePage = true;
+  if (strcmp(clientSSID,DEFAULT_CLIENT_SSID) == 0) showWelcomePage = true;
   WiFi.persistent(false);
 
   if (macroBoot>0) applyMacro(macroBoot);
@@ -126,7 +126,7 @@ void initAP(bool resetAP=false){
   if (apBehavior == AP_BEHAVIOR_BUTTON_ONLY && !resetAP) return;
 
   if (!apSSID[0] || resetAP) strcpy(apSSID, "WLED-AP");
-  if (resetAP) strcpy(apPass,"wled1234");
+  if (resetAP) strcpy(apPass,DEFAULT_AP_PASS);
   DEBUG_PRINT("Opening access point ");
   DEBUG_PRINTLN(apSSID);
   WiFi.softAPConfig(IPAddress(4, 3, 2, 1), IPAddress(4, 3, 2, 1), IPAddress(255,255,255,0));