Merge pull request #3144 from Aircoookie/esp8266-core

ESP8266 core 4.1.0, ESP32 core 5.2.0 (S2,S3,C3)

platformio.ini

@@ -10,7 +10,7 @@
 # ------------------------------------------------------------------------------
 
 # Release / CI binaries
-default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, esp32s2_saola, esp32c3, esp32s3dev_8MB
+default_envs = nodemcuv2, esp8266_2m, esp01_1m_full, esp32dev, esp32_eth, esp32s2_saola, lolin_s2_mini, esp32c3dev, esp32s3dev_8MB
 
 # Build everything
 ; default_envs = esp32dev, esp8285_4CH_MagicHome, codm-controller-0.6-rev2, codm-controller-0.6, esp32s2_saola, d1_mini_5CH_Shojo_PCB, d1_mini, sp501e, nodemcuv2, esp32_eth, anavi_miracle_controller, esp07, esp01_1m_full, m5atom, h803wf, d1_mini_ota, heltec_wifi_kit_8, esp8285_H801, d1_mini_debug, wemos_shield_esp32, elekstube_ips
@@ -55,18 +55,20 @@ arduino_core_2_6_3 = espressif8266@2.3.3
 arduino_core_2_7_4 = espressif8266@2.6.2
 arduino_core_3_0_0 = espressif8266@3.0.0
 arduino_core_3_2_0 = espressif8266@3.2.0
+arduino_core_4_1_0 = espressif8266@4.1.0
 
 # Development platforms
 arduino_core_develop = https://github.com/platformio/platform-espressif8266#develop
 arduino_core_git = https://github.com/platformio/platform-espressif8266#feature/stage
 
 # Platform to use for ESP8266
-platform_wled_default = ${common.arduino_core_3_2_0}
+platform_wled_default = ${common.arduino_core_4_1_0}
 # We use 2.7.4.7 for all, includes PWM flicker fix and Wstring optimization
-platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
+#platform_packages = tasmota/framework-arduinoespressif8266 @ 3.20704.7
-                    platformio/toolchain-xtensa @ ~2.40802.200502
+platform_packages = platformio/framework-arduinoespressif8266
-                    platformio/tool-esptool @ ~1.413.0
+                    platformio/toolchain-xtensa @ ~2.100300.220621 #2.40802.200502
-                    platformio/tool-esptoolpy @ ~1.30000.0
+                    platformio/tool-esptool #@ ~1.413.0
+                    platformio/tool-esptoolpy #@ ~1.30000.0
 
 # ------------------------------------------------------------------------------
 # FLAGS: DEBUG
@@ -104,6 +106,7 @@ build_flags =
   -DBEARSSL_SSL_BASIC
   -D CORE_DEBUG_LEVEL=0
   -D NDEBUG
+  -Wno-attributes ;; silence warnings about unknown attribute 'maybe_unused' in NeopixelBus
   #build_flags for the IRremoteESP8266 library (enabled decoders have to appear here)
   -D _IR_ENABLE_DEFAULT_=false
   -D DECODE_HASH=true
@@ -111,7 +114,7 @@ build_flags =
   -D DECODE_SONY=true
   -D DECODE_SAMSUNG=true
   -D DECODE_LG=true
-  ; -Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library
+  ;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this breaks framework code on ESP32-C3 and ESP32-S2
   -DWLED_USE_MY_CONFIG
   ; -D USERMOD_SENSORSTOMQTT
   #For ADS1115 sensor uncomment following
@@ -121,6 +124,7 @@ build_unflags =
 
 build_flags_esp8266 = ${common.build_flags}  ${esp8266.build_flags}
 build_flags_esp32   = ${common.build_flags}  ${esp32.build_flags}
+build_flags_esp32_V4= ${common.build_flags}  ${esp32_idf_V4.build_flags}
 
 ldscript_1m128k = eagle.flash.1m128.ld
 ldscript_2m512k = eagle.flash.2m512.ld
@@ -182,8 +186,9 @@ build_flags =
   -DESP8266
   -DFP_IN_IROM
   ;-Wno-deprecated-declarations
-  ;-Wno-register
+  -Wno-register  ;; leaves some warnings when compiling C files: command-line option '-Wno-register' is valid for C++/ObjC++ but not for C
-	;-Wno-misleading-indentation
+  ;-Dregister= # remove warnings in C++17 due to use of deprecated register keyword by the FastLED library ;; warning: this can be dangerous
+	-Wno-misleading-indentation
 ; NONOSDK22x_190703 = 2.2.2-dev(38a443e)
   -DPIO_FRAMEWORK_ARDUINO_ESPRESSIF_SDK22x_190703
 ; lwIP 2 - Higher Bandwidth no Features
@@ -200,7 +205,7 @@ lib_deps =
   #https://github.com/lorol/LITTLEFS.git
   ESPAsyncTCP @ 1.2.2
   ESPAsyncUDP
-  makuna/NeoPixelBus @ 2.6.9
+  makuna/NeoPixelBus @ 2.7.3
 
 [esp32]
 #platform = https://github.com/tasmota/platform-espressif32/releases/download/v2.0.2.3/platform-espressif32-2.0.2.3.zip
@@ -212,7 +217,7 @@ build_flags = -g
   -DARDUINO_ARCH_ESP32
   #-DCONFIG_LITTLEFS_FOR_IDF_3_2
   -D CONFIG_ASYNC_TCP_USE_WDT=0
-#use LITTLEFS library by lorol in ESP32 core 1.x.x instead of built-in in 2.x.x
+  #use LITTLEFS library by lorol in ESP32 core 1.x.x instead of built-in in 2.x.x
   -D LOROL_LITTLEFS
   ; -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when builing with arduino-esp32 >=2.0.3
 
@@ -224,27 +229,54 @@ lib_deps =
   makuna/NeoPixelBus @ 2.6.9
   https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
 
+
+[esp32_idf_V4]
+;; experimental buildenv for ESP32 using ESP-IDF 4.4.x / arduino-esp32 v2.0.5
+;; very similar to the normal ESP32 flags, but omitting Lorol LittleFS, as littlefs is included in the new framework already.
+;;
+;; please note that you can NOT update existing ESP32 installs with a "V4" build. Also updating by OTA will not work properly.
+;; You need to completely erasse your device (esptool erase_flash) first, then install the "V4" build from VSCode+platformio.
+platform = espressif32@5.2.0
+platform_packages = 
+build_flags = -g
+  -DARDUINO_ARCH_ESP32 -DESP32
+  #-DCONFIG_LITTLEFS_FOR_IDF_3_2
+  -D CONFIG_ASYNC_TCP_USE_WDT=0
+  -DARDUINO_USB_CDC_ON_BOOT=0 ;; this flag is mandatory for "classic ESP32" when builing with arduino-esp32 >=2.0.3
+default_partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
+lib_deps =
+  ${env.lib_deps}
+  makuna/NeoPixelBus @ 2.7.3
+  https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
+
 [esp32s2]
+;; generic definitions for all ESP32-S2 boards
+platform = espressif32@5.2.0
+platform_packages = 
 build_flags = -g
   -DARDUINO_ARCH_ESP32
   -DARDUINO_ARCH_ESP32S2
-  -DCONFIG_IDF_TARGET_ESP32S2
+  -DCONFIG_IDF_TARGET_ESP32S2=1
   -D CONFIG_ASYNC_TCP_USE_WDT=0
+  -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_USB_DFU_ON_BOOT=0
   -DCO
   -DARDUINO_USB_MODE=0 ;; this flag is mandatory for ESP32-S2 !
   ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
-  ;; ARDUINO_USB_CDC_ON_BOOT, ARDUINO_USB_MSC_ON_BOOT, ARDUINO_USB_DFU_ON_BOOT
+  ;; ARDUINO_USB_CDC_ON_BOOT
 
 lib_deps =
   ${env.lib_deps}
-  makuna/NeoPixelBus @ 2.6.9
+  makuna/NeoPixelBus @ 2.7.3
   https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
 
 [esp32c3]
+;; generic definitions for all ESP32-C3 boards
+platform = espressif32@5.2.0
+platform_packages = 
 build_flags = -g
   -DARDUINO_ARCH_ESP32
   -DARDUINO_ARCH_ESP32C3
-  -DCONFIG_IDF_TARGET_ESP32C3
+  -DCONFIG_IDF_TARGET_ESP32C3=1
   -D CONFIG_ASYNC_TCP_USE_WDT=0
   -DCO
   -DARDUINO_USB_MODE=1 ;; this flag is mandatory for ESP32-C3
@@ -253,25 +285,28 @@ build_flags = -g
 
 lib_deps =
   ${env.lib_deps}
-  makuna/NeoPixelBus @ 2.6.9
+  makuna/NeoPixelBus @ 2.7.3
   https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
 
 [esp32s3]
 ;; generic definitions for all ESP32-S3 boards
+platform = espressif32@5.2.0
+platform_packages = 
 build_flags = -g
   -DESP32
   -DARDUINO_ARCH_ESP32
   -DARDUINO_ARCH_ESP32S3
-  -DCONFIG_IDF_TARGET_ESP32S3
+  -DCONFIG_IDF_TARGET_ESP32S3=1
   -D CONFIG_ASYNC_TCP_USE_WDT=0
+  -DARDUINO_USB_MSC_ON_BOOT=0 -DARDUINO_DFU_ON_BOOT=0
   -DCO
   ;; please make sure that the following flags are properly set (to 0 or 1) by your board.json, or included in your custom platformio_override.ini entry:
-  ;; ARDUINO_USB_MODE, ARDUINO_USB_CDC_ON_BOOT, ARDUINO_USB_MSC_ON_BOOT, ARDUINO_USB_DFU_ON_BOOT
+  ;; ARDUINO_USB_MODE, ARDUINO_USB_CDC_ON_BOOT
 
 lib_deps =
   ${env.lib_deps}
   ;; NeoPixelBus 2.7.1 is the first that has official support for ESP32-S3
-  makuna/NeoPixelBus @ ~2.7.1
+  makuna/NeoPixelBus @ ~2.7.3
   https://github.com/pbolduc/AsyncTCP.git @ 1.2.0
 
 
@@ -367,6 +402,21 @@ board_build.partitions = ${esp32.default_partitions}
 board_build.f_flash = 80000000L
 board_build.flash_mode = qio
 
+[env:esp32dev_V4_qio80]
+;; experimental ESP32 env using ESP-IDF V4.4.x 
+;; Warning: this build environment is not stable!!
+;; please erase your device before installing.
+board = esp32dev
+platform = ${esp32_idf_V4.platform}
+platform_packages = ${esp32_idf_V4.platform_packages}
+build_unflags = ${common.build_unflags}
+build_flags = ${common.build_flags}  ${esp32_idf_V4.build_flags} -D WLED_RELEASE_NAME=ESP32_V4_qio80 #-D WLED_DISABLE_BROWNOUT_DET
+lib_deps = ${esp32_idf_V4.lib_deps}
+monitor_filters = esp32_exception_decoder
+board_build.partitions = ${esp32_idf_V4.default_partitions}
+board_build.f_flash = 80000000L
+board_build.flash_mode = dio
+
 [env:esp32_eth]
 board = esp32-poe
 platform = ${esp32.platform}
@@ -387,17 +437,20 @@ board_build.flash_mode = qio
 upload_speed = 460800
 build_unflags = ${common.build_unflags}
 build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=S2_saola
+  -DARDUINO_USB_CDC_ON_BOOT=1
 lib_deps = ${esp32s2.lib_deps}
 
-[env:esp32c3]
+[env:esp32c3dev]
-platform = espressif32@5.1.1    ;; well-tested on -C3, good compatibility with WLED
+extends = esp32c3
-; platform = espressif32@~5.2.0 ;; might help in case you experience bootloops due to corrupted flash filesystem
+platform = ${esp32c3.platform}
+platform_packages = ${esp32c3.platform_packages}
 framework = arduino
 board = esp32-c3-devkitm-1
 board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
 build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
   -D WLED_WATCHDOG_TIMEOUT=0
-  ; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual USB
+  ; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
+  -DARDUINO_USB_CDC_ON_BOOT=0   ;; for serial-to-USB chip
 upload_speed = 460800
 build_unflags = ${common.build_unflags}
 lib_deps = ${esp32c3.lib_deps}
@@ -405,14 +458,14 @@ lib_deps = ${esp32c3.lib_deps}
 [env:esp32s3dev_8MB]
 ;; ESP32-S3-DevKitC-1 development board, with 8MB FLASH, no PSRAM (flash_mode: qio)
 board = esp32-s3-devkitc-1
-platform = espressif32@5.1.1
+platform = ${esp32s3.platform}
-platform_packages =
+platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600 ; or  460800
 build_unflags = ${common.build_unflags}
 build_flags =  ${common.build_flags} ${esp32s3.build_flags} 
   -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
-  -D ARDUINO_USB_CDC_ON_BOOT=0 -D ARDUINO_USB_MSC_ON_BOOT=0 -D ARDUINO_DFU_ON_BOOT=0 -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
+  -D ARDUINO_USB_CDC_ON_BOOT=0  ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
-  ;-D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MSC_ON_BOOT=0 -D ARDUINO_DFU_ON_BOOT=0 ; -D ARDUINO_USB_MODE=0 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
+  ;-D ARDUINO_USB_CDC_ON_BOOT=1 ;; -D ARDUINO_USB_MODE=0 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
   ;-D WLED_DEBUG
 lib_deps = ${esp32s3.lib_deps}
 board_build.partitions = tools/WLED_ESP32_8MB.csv
@@ -426,13 +479,14 @@ monitor_filters = esp32_exception_decoder
 ;board = um_tinys3 ;    -> needs workaround from https://github.com/Aircoookie/WLED/pull/2905#issuecomment-1328049860
 ;board = esp32s3box   ; -> error: 'esp32_adc2gpio' was not declared in this scope
 board = esp32-s3-devkitc-1 ; -> compiles, but does not support PSRAM
-platform = espressif32 @ ~5.2.0
+platform = ${esp32s3.platform}
-platform_packages = 
+platform_packages = ${esp32s3.platform_packages}
 upload_speed = 921600
 build_unflags = ${common.build_unflags}
 build_flags =  ${common.build_flags} ${esp32s3.build_flags} 
   -D CONFIG_LITTLEFS_FOR_IDF_3_2 -D WLED_WATCHDOG_TIMEOUT=0
-  -D ARDUINO_USB_MODE=1 -D ARDUINO_USB_MSC_ON_BOOT=0 ; -D ARDUINO_USB_CDC_ON_BOOT=0
+  ;-D ARDUINO_USB_CDC_ON_BOOT=0 ;; -D ARDUINO_USB_MODE=1 ;; for boards with serial-to-USB chip
+  -D ARDUINO_USB_CDC_ON_BOOT=1  ;; -D ARDUINO_USB_MODE=0 ;; for boards with USB-OTG connector only (USBCDC or "TinyUSB")
   ; -D WLED_RELEASE_NAME=ESP32-S3_PSRAM
   -D WLED_USE_PSRAM -DBOARD_HAS_PSRAM ; tells WLED that PSRAM shall be used
 lib_deps = ${esp32s3.lib_deps}
@@ -504,13 +558,14 @@ build_flags = ${common.build_flags_esp8266} -D LEDPIN=12 -D IRPIN=-1 -D RLYPIN=2
 lib_deps = ${esp8266.lib_deps}
 
 [env:lolin_s2_mini]
-platform = espressif32@5.1.1
+platform = ${esp32s2.platform}
+platform_packages = ${esp32s2.platform_packages}
 board = lolin_s2_mini
 board_build.partitions = tools/WLED_ESP32_4MB_1MB_FS.csv
-build_unflags = ${common.build_unflags}
+build_unflags = ${common.build_unflags} -DARDUINO_USB_CDC_ON_BOOT=1
 build_flags = ${common.build_flags} ${esp32s2.build_flags} #-D WLED_RELEASE_NAME=LolinS2
   -DBOARD_HAS_PSRAM
-  -D ARDUINO_USB_CDC_ON_BOOT
+  -DARDUINO_USB_CDC_ON_BOOT=0
   -D WLED_USE_PSRAM
   -D WLED_WATCHDOG_TIMEOUT=0
   -D CONFIG_ASYNC_TCP_USE_WDT=0
@@ -530,6 +585,24 @@ lib_deps = ${esp32s2.lib_deps}
 # custom board configurations
 # ------------------------------------------------------------------------------
 
+[env:esp32c3dev_2MB]
+;; for ESP32-C3 boards with 2MB flash (instead of 4MB).
+;; this board need a specific partition file. OTA not possible.
+extends = esp32c3
+platform = ${esp32c3.platform}
+platform_packages = ${esp32c3.platform_packages}
+board = esp32-c3-devkitm-1
+build_flags = ${common.build_flags} ${esp32c3.build_flags} #-D WLED_RELEASE_NAME=ESP32-C3
+  -D WLED_WATCHDOG_TIMEOUT=0
+  -D WLED_DISABLE_OTA
+  ; -DARDUINO_USB_CDC_ON_BOOT=1 ;; for virtual CDC USB
+  -DARDUINO_USB_CDC_ON_BOOT=0   ;; for serial-to-USB chip
+build_unflags = ${common.build_unflags}
+upload_speed = 115200
+lib_deps = ${esp32c3.lib_deps}
+board_build.partitions = tools/WLED_ESP32_2MB_noOTA.csv
+board_build.flash_mode = dio
+
 [env:wemos_shield_esp32]
 board = esp32dev
 platform = espressif32@3.2

tools/WLED_ESP32_2MB_noOTA.csv

@@ -0,0 +1,5 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,    20K,
+otadata,  data, ota,     0xe000,    8K,
+app0,     app,  ota_0,   0x10000,   1536K,
+spiffs,   data, spiffs,  0x190000,  384K,